From a0cb47f1a13711f5483e7bd89a2d702014beff27 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 22 Jul 2015 10:28:48 +0200 Subject: [PATCH] ARM: zynq: DT: Use the right names for nodes Based on SPEC you right names with addresses. Signed-off-by: Michal Simek --- arch/arm/dts/zynq-7000.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 920715989e..6faac40446 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -51,7 +51,7 @@ interrupt-parent = <&intc>; ranges; - i2c0: zynq-i2c@e0004000 { + i2c0: i2c@e0004000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 38>; @@ -62,7 +62,7 @@ #size-cells = <0>; }; - i2c1: zynq-i2c@e0005000 { + i2c1: i2c@e0005000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 39>; @@ -82,7 +82,7 @@ <0xF8F00100 0x100>; }; - L2: cache-controller { + L2: cache-controller@f8f02000 { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; arm,data-latency = <3 2 2>; @@ -91,7 +91,7 @@ cache-level = <2>; }; - uart0: uart@e0000000 { + uart0: serial@e0000000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; @@ -100,7 +100,7 @@ interrupts = <0 27 4>; }; - uart1: uart@e0001000 { + uart1: serial@e0001000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; @@ -153,7 +153,7 @@ clock-names = "pclk", "hclk", "tx_clk"; }; - sdhci0: ps7-sdhci@e0100000 { + sdhci0: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -163,7 +163,7 @@ reg = <0xe0100000 0x1000>; } ; - sdhci1: ps7-sdhci@e0101000 { + sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -207,7 +207,7 @@ clocks = <&clkc 4>; }; - ttc0: ttc0@f8001000 { + ttc0: timer@f8001000 { interrupt-parent = <&intc>; interrupts = < 0 10 4 0 11 4 0 12 4 >; compatible = "cdns,ttc"; @@ -215,14 +215,14 @@ reg = <0xF8001000 0x1000>; }; - ttc1: ttc1@f8002000 { + ttc1: timer@f8002000 { interrupt-parent = <&intc>; interrupts = < 0 37 4 0 38 4 0 39 4 >; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; }; - scutimer: scutimer@f8f00600 { + scutimer: timer@f8f00600 { interrupt-parent = <&intc>; interrupts = < 1 13 0x301 >; compatible = "arm,cortex-a9-twd-timer"; -- 2.39.5