From 9c4b44d1e3e988b3db6a631c436498e186297b31 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Thu, 8 Aug 2024 00:08:45 +0100 Subject: [PATCH] sunxi: H616: switch to OF_UPSTREAM With the recent "old-style sunxi" sync and the penultimate OF_UPSTREAM DT update, both directories were based on the same v6.10 kernel tree. And while there is one subtle difference in many Allwinner SoC's DT files, the H616 ones turn out to be identical. Remove the old copies of the H616 related .dts and .dtsi files, and switch the whole H616 SoC over to use OF_UPSTREAM. This immediately benefits from the recent upstream DT update, to kernel v6.11. Signed-off-by: Andre Przywara --- arch/arm/dts/Makefile | 7 - arch/arm/dts/sun50i-h313-tanix-tx1.dts | 183 ---- .../dts/sun50i-h616-bigtreetech-cb1-manta.dts | 35 - arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi | 143 --- arch/arm/dts/sun50i-h616-bigtreetech-pi.dts | 63 -- arch/arm/dts/sun50i-h616-cpu-opp.dtsi | 115 --- arch/arm/dts/sun50i-h616-orangepi-zero.dtsi | 131 --- arch/arm/dts/sun50i-h616-orangepi-zero2.dts | 145 --- arch/arm/dts/sun50i-h616-x96-mate.dts | 207 ---- arch/arm/dts/sun50i-h616.dtsi | 930 ------------------ .../arm/dts/sun50i-h618-longan-module-3h.dtsi | 80 -- arch/arm/dts/sun50i-h618-longanpi-3h.dts | 144 --- arch/arm/dts/sun50i-h618-orangepi-zero2w.dts | 181 ---- arch/arm/dts/sun50i-h618-orangepi-zero3.dts | 101 -- .../arm/dts/sun50i-h618-transpeed-8k618-t.dts | 189 ---- .../dts/sun50i-h700-anbernic-rg35xx-2024.dts | 327 ------ .../arm/dts/sun50i-h700-anbernic-rg35xx-h.dts | 36 - .../dts/sun50i-h700-anbernic-rg35xx-plus.dts | 53 - arch/arm/mach-sunxi/Kconfig | 1 + configs/orangepi_zero2_defconfig | 2 +- configs/orangepi_zero2w_defconfig | 2 +- configs/orangepi_zero3_defconfig | 2 +- configs/tanix_tx1_defconfig | 2 +- configs/transpeed-8k618-t_defconfig | 2 +- configs/x96_mate_defconfig | 2 +- include/dt-bindings/clock/sun50i-h616-ccu.h | 116 --- include/dt-bindings/reset/sun50i-h616-ccu.h | 70 -- 27 files changed, 7 insertions(+), 3262 deletions(-) delete mode 100644 arch/arm/dts/sun50i-h313-tanix-tx1.dts delete mode 100644 arch/arm/dts/sun50i-h616-bigtreetech-cb1-manta.dts delete mode 100644 arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi delete mode 100644 arch/arm/dts/sun50i-h616-bigtreetech-pi.dts delete mode 100644 arch/arm/dts/sun50i-h616-cpu-opp.dtsi delete mode 100644 arch/arm/dts/sun50i-h616-orangepi-zero.dtsi delete mode 100644 arch/arm/dts/sun50i-h616-orangepi-zero2.dts delete mode 100644 arch/arm/dts/sun50i-h616-x96-mate.dts delete mode 100644 arch/arm/dts/sun50i-h616.dtsi delete mode 100644 arch/arm/dts/sun50i-h618-longan-module-3h.dtsi delete mode 100644 arch/arm/dts/sun50i-h618-longanpi-3h.dts delete mode 100644 arch/arm/dts/sun50i-h618-orangepi-zero2w.dts delete mode 100644 arch/arm/dts/sun50i-h618-orangepi-zero3.dts delete mode 100644 arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts delete mode 100644 arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts delete mode 100644 arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts delete mode 100644 arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts delete mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h delete mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 65176c8fb8..54f166eda5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -721,13 +721,6 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-pine-h64-model-b.dtb \ sun50i-h6-tanix-tx6.dtb \ sun50i-h6-tanix-tx6-mini.dtb -dtb-$(CONFIG_MACH_SUN50I_H616) += \ - sun50i-h313-tanix-tx1.dtb \ - sun50i-h616-orangepi-zero2.dtb \ - sun50i-h618-orangepi-zero2w.dtb \ - sun50i-h618-orangepi-zero3.dtb \ - sun50i-h618-transpeed-8k618-t.dtb \ - sun50i-h616-x96-mate.dtb dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-amarula-relic.dtb \ sun50i-a64-bananapi-m64.dtb \ diff --git a/arch/arm/dts/sun50i-h313-tanix-tx1.dts b/arch/arm/dts/sun50i-h313-tanix-tx1.dts deleted file mode 100644 index bb2cde59bd..0000000000 --- a/arch/arm/dts/sun50i-h313-tanix-tx1.dts +++ /dev/null @@ -1,183 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2024 Arm Ltd. - */ - -/dts-v1/; - -#include "sun50i-h616.dtsi" - -#include -#include -#include -#include - -/ { - model = "Tanix TX1"; - compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616"; - - aliases { - serial0 = &uart0; - ethernet0 = &sdio_wifi; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key { - label = "hidden"; - linux,code = ; - gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */ - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - default-state = "on"; - }; - }; - - wifi_pwrseq: pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rtc CLK_OSC32K_FANOUT>; - clock-names = "ext_clock"; - pinctrl-0 = <&x32clk_fanout_pin>; - pinctrl-names = "default"; - reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ - }; - - reg_vcc5v: vcc5v { - /* board wide 5V supply directly from the DC input */ - compatible = "regulator-fixed"; - regulator-name = "vcc-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ir { - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_dldo1>; - vqmmc-supply = <®_aldo1>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - sdio_wifi: wifi@1 { - reg = <1>; - }; -}; - -&mmc2 { - vmmc-supply = <®_dldo1>; - vqmmc-supply = <®_aldo1>; - bus-width = <8>; - non-removable; - max-frequency = <100000000>; - cap-mmc-hw-reset; - mmc-ddr-1_8v; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&pio { - vcc-pc-supply = <®_aldo1>; - vcc-pf-supply = <®_dldo1>; - vcc-pg-supply = <®_aldo1>; - vcc-ph-supply = <®_dldo1>; - vcc-pi-supply = <®_dldo1>; -}; - -&r_i2c { - status = "okay"; - - axp313: pmic@36 { - compatible = "x-powers,axp313a"; - reg = <0x36>; - #interrupt-cells = <1>; - interrupt-controller; - - vin1-supply = <®_vcc5v>; - vin2-supply = <®_vcc5v>; - vin3-supply = <®_vcc5v>; - - regulators { - /* Supplies VCC-PLL, so needs to be always on. */ - reg_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8"; - }; - - /* Supplies VCC-IO, so needs to be always on. */ - reg_dldo1: dldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3"; - }; - - reg_dcdc1: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <990000>; - regulator-name = "vdd-gpu-sys"; - }; - - reg_dcdc2: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1120000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdc3: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "vdd-dram"; - }; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; -}; - -&usbotg { - dr_mode = "host"; /* USB A type receptable */ - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h616-bigtreetech-cb1-manta.dts b/arch/arm/dts/sun50i-h616-bigtreetech-cb1-manta.dts deleted file mode 100644 index 4bfb52609c..0000000000 --- a/arch/arm/dts/sun50i-h616-bigtreetech-cb1-manta.dts +++ /dev/null @@ -1,35 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2023 Martin Botka . - */ - -/dts-v1/; - -#include "sun50i-h616-bigtreetech-cb1.dtsi" - -/ { - model = "BigTreeTech CB1"; - compatible = "bigtreetech,cb1-manta", "bigtreetech,cb1", "allwinner,sun50i-h616"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci1 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi deleted file mode 100644 index d12b01c5f4..0000000000 --- a/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2023 Martin Botka . - */ - -/dts-v1/; - -#include "sun50i-h616.dtsi" -#include "sun50i-h616-cpu-opp.dtsi" - -#include -#include -#include - -/ { - aliases { - ethernet0 = &rtl8189ftv; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - }; - }; - - reg_vcc5v: regulator-vcc5v { - /* board wide 5V supply from carrier boards */ - compatible = "regulator-fixed"; - regulator-name = "vcc-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_vcc33_wifi: vcc33-wifi { - compatible = "regulator-fixed"; - regulator-name = "vcc33-wifi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <®_vcc5v>; - }; - - reg_vcc_wifi_io: vcc-wifi-io { - compatible = "regulator-fixed"; - regulator-name = "vcc-wifi-io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - vin-supply = <®_vcc33_wifi>; - }; - - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; - clock-names = "ext_clock"; - reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ - post-power-on-delay-ms = <200>; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&mmc0 { - vmmc-supply = <®_dldo1>; - /* Card detection pin is not connected */ - broken-cd; - bus-width = <4>; - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_vcc33_wifi>; - vqmmc-supply = <®_vcc_wifi_io>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - mmc-ddr-1_8v; - status = "okay"; - - rtl8189ftv: wifi@1 { - reg = <1>; - }; -}; - -&r_i2c { - status = "okay"; - - axp313a: pmic@36 { - compatible = "x-powers,axp313a"; - reg = <0x36>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - reg_dcdc1: dcdc1 { - regulator-name = "vdd-gpu-sys"; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <990000>; - regulator-always-on; - }; - - reg_dcdc2: dcdc2 { - regulator-name = "vdd-cpu"; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1100000>; - regulator-ramp-delay = <200>; - regulator-always-on; - }; - - reg_dcdc3: dcdc3 { - regulator-name = "vcc-dram"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - reg_aldo1: aldo1 { - regulator-name = "vcc-1v8-pll"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_dldo1: dldo1 { - regulator-name = "vcc-3v3-io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h616-bigtreetech-pi.dts b/arch/arm/dts/sun50i-h616-bigtreetech-pi.dts deleted file mode 100644 index ff84a37944..0000000000 --- a/arch/arm/dts/sun50i-h616-bigtreetech-pi.dts +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2023 Martin Botka . - */ - -/dts-v1/; - -#include "sun50i-h616-bigtreetech-cb1.dtsi" - -/ { - model = "BigTreeTech Pi"; - compatible = "bigtreetech,pi", "allwinner,sun50i-h616"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - status = "okay"; -}; - -&ir { - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h616-cpu-opp.dtsi b/arch/arm/dts/sun50i-h616-cpu-opp.dtsi deleted file mode 100644 index aca22a7f01..0000000000 --- a/arch/arm/dts/sun50i-h616-cpu-opp.dtsi +++ /dev/null @@ -1,115 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -// Copyright (C) 2023 Martin Botka - -/ { - cpu_opp_table: opp-table-cpu { - compatible = "allwinner,sun50i-h616-operating-points"; - nvmem-cells = <&cpu_speed_grade>; - opp-shared; - - opp-480000000 { - opp-hz = /bits/ 64 <480000000>; - opp-microvolt = <900000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x1f>; - }; - - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <900000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x12>; - }; - - opp-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <900000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x0d>; - }; - - opp-792000000 { - opp-hz = /bits/ 64 <792000000>; - opp-microvolt-speed1 = <900000>; - opp-microvolt-speed4 = <940000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x12>; - }; - - opp-936000000 { - opp-hz = /bits/ 64 <936000000>; - opp-microvolt = <900000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x0d>; - }; - - opp-1008000000 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt-speed0 = <950000>; - opp-microvolt-speed1 = <940000>; - opp-microvolt-speed2 = <950000>; - opp-microvolt-speed3 = <950000>; - opp-microvolt-speed4 = <1020000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x1f>; - }; - - opp-1104000000 { - opp-hz = /bits/ 64 <1104000000>; - opp-microvolt-speed0 = <1000000>; - opp-microvolt-speed2 = <1000000>; - opp-microvolt-speed3 = <1000000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x0d>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt-speed0 = <1050000>; - opp-microvolt-speed1 = <1020000>; - opp-microvolt-speed2 = <1050000>; - opp-microvolt-speed3 = <1050000>; - opp-microvolt-speed4 = <1100000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x1f>; - }; - - opp-1320000000 { - opp-hz = /bits/ 64 <1320000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x1d>; - }; - - opp-1416000000 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x0d>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt-speed1 = <1100000>; - opp-microvolt-speed3 = <1100000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x0a>; - }; - }; -}; - -&cpu0 { - operating-points-v2 = <&cpu_opp_table>; -}; - -&cpu1 { - operating-points-v2 = <&cpu_opp_table>; -}; - -&cpu2 { - operating-points-v2 = <&cpu_opp_table>; -}; - -&cpu3 { - operating-points-v2 = <&cpu_opp_table>; -}; diff --git a/arch/arm/dts/sun50i-h616-orangepi-zero.dtsi b/arch/arm/dts/sun50i-h616-orangepi-zero.dtsi deleted file mode 100644 index fc7315b944..0000000000 --- a/arch/arm/dts/sun50i-h616-orangepi-zero.dtsi +++ /dev/null @@ -1,131 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2020 Arm Ltd. - * - * DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3. - * Excludes PMIC nodes and properties, since they are different between the two. - */ - -#include "sun50i-h616.dtsi" - -#include -#include -#include - -/ { - aliases { - ethernet0 = &emac0; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ - default-state = "on"; - }; - - led-1 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ - }; - }; - - reg_vcc5v: vcc5v { - /* board wide 5V supply directly from the USB-C socket */ - compatible = "regulator-fixed"; - regulator-name = "vcc-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb1_vbus: regulator-usb1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_vcc5v>; - enable-active-high; - gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ - }; -}; - -&ehci1 { - status = "okay"; -}; - -/* USB 2 & 3 are on headers only. */ - -&emac0 { - pinctrl-names = "default"; - pinctrl-0 = <&ext_rgmii_pins>; - phy-handle = <&ext_rgmii_phy>; - status = "okay"; -}; - -&mdio0 { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - -&mmc0 { - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - bus-width = <4>; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; -}; - -&usbotg { - /* - * PHY0 pins are connected to a USB-C socket, but a role switch - * is not implemented: both CC pins are pulled to GND. - * The VBUS pins power the device, so a fixed peripheral mode - * is the best choice. - * The board can be powered via GPIOs, in this case port0 *can* - * act as a host (with a cable/adapter ignoring CC), as VBUS is - * then provided by the GPIOs. Any user of this setup would - * need to adjust the DT accordingly: dr_mode set to "host", - * enabling OHCI0 and EHCI0. - */ - dr_mode = "peripheral"; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h616-orangepi-zero2.dts b/arch/arm/dts/sun50i-h616-orangepi-zero2.dts deleted file mode 100644 index a360d8567f..0000000000 --- a/arch/arm/dts/sun50i-h616-orangepi-zero2.dts +++ /dev/null @@ -1,145 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2020 Arm Ltd. - */ - -/dts-v1/; - -#include "sun50i-h616-orangepi-zero.dtsi" -#include "sun50i-h616-cpu-opp.dtsi" - -/ { - model = "OrangePi Zero2"; - compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616"; -}; - -&cpu0 { - cpu-supply = <®_dcdca>; -}; - -&emac0 { - allwinner,rx-delay-ps = <3100>; - allwinner,tx-delay-ps = <700>; - phy-mode = "rgmii"; - phy-supply = <®_dcdce>; -}; - -&mmc0 { - vmmc-supply = <®_dcdce>; -}; - -&r_rsb { - status = "okay"; - - axp305: pmic@745 { - compatible = "x-powers,axp305", "x-powers,axp805", - "x-powers,axp806"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x745>; - - x-powers,self-working-mode; - vina-supply = <®_vcc5v>; - vinb-supply = <®_vcc5v>; - vinc-supply = <®_vcc5v>; - vind-supply = <®_vcc5v>; - vine-supply = <®_vcc5v>; - aldoin-supply = <®_vcc5v>; - bldoin-supply = <®_vcc5v>; - cldoin-supply = <®_vcc5v>; - - regulators { - reg_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-sys"; - }; - - reg_aldo2: aldo2 { /* 3.3V on headers */ - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3-ext"; - }; - - reg_aldo3: aldo3 { /* 3.3V on headers */ - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3-ext2"; - }; - - reg_bldo1: bldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8"; - }; - - bldo2 { - /* unused */ - }; - - bldo3 { - /* unused */ - }; - - bldo4 { - /* unused */ - }; - - cldo1 { - /* reserved */ - }; - - cldo2 { - /* unused */ - }; - - cldo3 { - /* unused */ - }; - - reg_dcdca: dcdca { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdcc: dcdcc { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <990000>; - regulator-name = "vdd-gpu-sys"; - }; - - reg_dcdcd: dcdcd { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vdd-dram"; - }; - - reg_dcdce: dcdce { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-eth-mmc"; - }; - - sw { - /* unused */ - }; - }; - }; -}; - -&pio { - vcc-pc-supply = <®_aldo1>; - vcc-pf-supply = <®_aldo1>; - vcc-pg-supply = <®_bldo1>; - vcc-ph-supply = <®_aldo1>; - vcc-pi-supply = <®_aldo1>; -}; diff --git a/arch/arm/dts/sun50i-h616-x96-mate.dts b/arch/arm/dts/sun50i-h616-x96-mate.dts deleted file mode 100644 index 26d25b5b59..0000000000 --- a/arch/arm/dts/sun50i-h616-x96-mate.dts +++ /dev/null @@ -1,207 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2021 Arm Ltd. - */ - -/dts-v1/; - -#include "sun50i-h616.dtsi" -#include "sun50i-h616-cpu-opp.dtsi" - -#include -#include - -/ { - model = "X96 Mate"; - compatible = "hechuang,x96-mate", "allwinner,sun50i-h616"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_vcc5v: vcc5v { - /* board wide 5V supply directly from the DC input */ - compatible = "regulator-fixed"; - regulator-name = "vcc-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdca>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ir { - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_dcdce>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - bus-width = <4>; - status = "okay"; -}; - -&mmc2 { - vmmc-supply = <®_dcdce>; - vqmmc-supply = <®_bldo1>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp305: pmic@745 { - compatible = "x-powers,axp305", "x-powers,axp805", - "x-powers,axp806"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x745>; - - x-powers,self-working-mode; - vina-supply = <®_vcc5v>; - vinb-supply = <®_vcc5v>; - vinc-supply = <®_vcc5v>; - vind-supply = <®_vcc5v>; - vine-supply = <®_vcc5v>; - aldoin-supply = <®_vcc5v>; - bldoin-supply = <®_vcc5v>; - cldoin-supply = <®_vcc5v>; - - regulators { - reg_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-sys"; - }; - - /* Enabled by the Android BSP */ - reg_aldo2: aldo2 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3-ext"; - status = "disabled"; - }; - - /* Enabled by the Android BSP */ - reg_aldo3: aldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3-ext2"; - status = "disabled"; - }; - - reg_bldo1: bldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8"; - }; - - /* Enabled by the Android BSP */ - reg_bldo2: bldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8-2"; - status = "disabled"; - }; - - bldo3 { - /* unused */ - }; - - bldo4 { - /* unused */ - }; - - cldo1 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-name = "vcc2v5"; - }; - - cldo2 { - /* unused */ - }; - - cldo3 { - /* unused */ - }; - - reg_dcdca: dcdca { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdcc: dcdcc { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <990000>; - regulator-name = "vdd-gpu-sys"; - }; - - reg_dcdcd: dcdcd { - regulator-always-on; - regulator-min-microvolt = <1360000>; - regulator-max-microvolt = <1360000>; - regulator-name = "vdd-dram"; - }; - - reg_dcdce: dcdce { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-eth-mmc"; - }; - - sw { - /* unused */ - }; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; -}; - -&usbotg { - dr_mode = "host"; /* USB A type receptable */ - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h616.dtsi b/arch/arm/dts/sun50i-h616.dtsi deleted file mode 100644 index 921d5f61d8..0000000000 --- a/arch/arm/dts/sun50i-h616.dtsi +++ /dev/null @@ -1,930 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -// Copyright (C) 2020 Arm Ltd. -// based on the H6 dtsi, which is: -// Copyright (C) 2017 Icenowy Zheng - -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <1>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <2>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <3>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - #cooling-cells = <2>; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* - * 256 KiB reserved for Trusted Firmware-A (BL31). - * This is added by BL31 itself, but some bootloaders fail - * to propagate this into the DTB handed to kernels. - */ - secmon@40000000 { - reg = <0x0 0x40000000 0x0 0x40000>; - no-map; - }; - }; - - osc24M: osc24M-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - arm,no-tick-in-suspend; - interrupts = , - , - , - ; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x40000000>; - - syscon: syscon@3000000 { - compatible = "allwinner,sun50i-h616-system-control"; - reg = <0x03000000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram_c: sram@28000 { - compatible = "mmio-sram"; - reg = <0x00028000 0x30000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00028000 0x30000>; - }; - }; - - ccu: clock@3001000 { - compatible = "allwinner,sun50i-h616-ccu"; - reg = <0x03001000 0x1000>; - clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>; - clock-names = "hosc", "losc", "iosc"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - dma: dma-controller@3002000 { - compatible = "allwinner,sun50i-h616-dma", - "allwinner,sun50i-a100-dma"; - reg = <0x03002000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; - clock-names = "bus", "mbus"; - dma-channels = <16>; - dma-requests = <49>; - resets = <&ccu RST_BUS_DMA>; - #dma-cells = <1>; - }; - - sid: efuse@3006000 { - compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid"; - reg = <0x03006000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - ths_calibration: thermal-sensor-calibration@14 { - reg = <0x14 0x8>; - }; - - cpu_speed_grade: cpu-speed-grade@0 { - reg = <0x0 2>; - }; - }; - - watchdog: watchdog@30090a0 { - compatible = "allwinner,sun50i-h616-wdt", - "allwinner,sun6i-a31-wdt"; - reg = <0x030090a0 0x20>; - interrupts = ; - clocks = <&osc24M>; - }; - - pio: pinctrl@300b000 { - compatible = "allwinner,sun50i-h616-pinctrl"; - reg = <0x0300b000 0x400>; - interrupts = , - , - , - , - , - , - , - ; - clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>; - clock-names = "apb", "hosc", "losc"; - gpio-controller; - #gpio-cells = <3>; - interrupt-controller; - #interrupt-cells = <3>; - - ext_rgmii_pins: rgmii-pins { - pins = "PI0", "PI1", "PI2", "PI3", "PI4", - "PI5", "PI7", "PI8", "PI9", "PI10", - "PI11", "PI12", "PI13", "PI14", "PI15", - "PI16"; - function = "emac0"; - drive-strength = <40>; - }; - - i2c0_pins: i2c0-pins { - pins = "PI5", "PI6"; - function = "i2c0"; - }; - - i2c3_ph_pins: i2c3-ph-pins { - pins = "PH4", "PH5"; - function = "i2c3"; - }; - - ir_rx_pin: ir-rx-pin { - pins = "PH10"; - function = "ir_rx"; - }; - - mmc0_pins: mmc0-pins { - pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - function = "mmc0"; - drive-strength = <30>; - bias-pull-up; - }; - - /omit-if-no-ref/ - mmc1_pins: mmc1-pins { - pins = "PG0", "PG1", "PG2", "PG3", - "PG4", "PG5"; - function = "mmc1"; - drive-strength = <30>; - bias-pull-up; - }; - - mmc2_pins: mmc2-pins { - pins = "PC0", "PC1", "PC5", "PC6", - "PC8", "PC9", "PC10", "PC11", - "PC13", "PC14", "PC15", "PC16"; - function = "mmc2"; - drive-strength = <30>; - bias-pull-up; - }; - - /omit-if-no-ref/ - spi0_pins: spi0-pins { - pins = "PC0", "PC2", "PC4"; - function = "spi0"; - }; - - /omit-if-no-ref/ - spi0_cs0_pin: spi0-cs0-pin { - pins = "PC3"; - function = "spi0"; - }; - - /omit-if-no-ref/ - spi1_pins: spi1-pins { - pins = "PH6", "PH7", "PH8"; - function = "spi1"; - }; - - /omit-if-no-ref/ - spi1_cs0_pin: spi1-cs0-pin { - pins = "PH5"; - function = "spi1"; - }; - - spdif_tx_pin: spdif-tx-pin { - pins = "PH4"; - function = "spdif"; - }; - - uart0_ph_pins: uart0-ph-pins { - pins = "PH0", "PH1"; - function = "uart0"; - }; - - /omit-if-no-ref/ - uart1_pins: uart1-pins { - pins = "PG6", "PG7"; - function = "uart1"; - }; - - /omit-if-no-ref/ - uart1_rts_cts_pins: uart1-rts-cts-pins { - pins = "PG8", "PG9"; - function = "uart1"; - }; - - /omit-if-no-ref/ - x32clk_fanout_pin: x32clk-fanout-pin { - pins = "PG10"; - function = "clock"; - }; - }; - - gic: interrupt-controller@3021000 { - compatible = "arm,gic-400"; - reg = <0x03021000 0x1000>, - <0x03022000 0x2000>, - <0x03024000 0x2000>, - <0x03026000 0x2000>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - }; - - mmc0: mmc@4020000 { - compatible = "allwinner,sun50i-h616-mmc", - "allwinner,sun50i-a100-mmc"; - reg = <0x04020000 0x1000>; - clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; - clock-names = "ahb", "mmc"; - resets = <&ccu RST_BUS_MMC0>; - reset-names = "ahb"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - status = "disabled"; - max-frequency = <150000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - mmc-ddr-3_3v; - cap-sdio-irq; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@4021000 { - compatible = "allwinner,sun50i-h616-mmc", - "allwinner,sun50i-a100-mmc"; - reg = <0x04021000 0x1000>; - clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; - clock-names = "ahb", "mmc"; - resets = <&ccu RST_BUS_MMC1>; - reset-names = "ahb"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - status = "disabled"; - max-frequency = <150000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - mmc-ddr-3_3v; - cap-sdio-irq; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@4022000 { - compatible = "allwinner,sun50i-h616-emmc", - "allwinner,sun50i-a100-emmc"; - reg = <0x04022000 0x1000>; - clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; - clock-names = "ahb", "mmc"; - resets = <&ccu RST_BUS_MMC2>; - reset-names = "ahb"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - status = "disabled"; - max-frequency = <150000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - mmc-ddr-3_3v; - cap-sdio-irq; - #address-cells = <1>; - #size-cells = <0>; - }; - - uart0: serial@5000000 { - compatible = "snps,dw-apb-uart"; - reg = <0x05000000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART0>; - dmas = <&dma 14>, <&dma 14>; - dma-names = "tx", "rx"; - resets = <&ccu RST_BUS_UART0>; - status = "disabled"; - }; - - uart1: serial@5000400 { - compatible = "snps,dw-apb-uart"; - reg = <0x05000400 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART1>; - dmas = <&dma 15>, <&dma 15>; - dma-names = "tx", "rx"; - resets = <&ccu RST_BUS_UART1>; - status = "disabled"; - }; - - uart2: serial@5000800 { - compatible = "snps,dw-apb-uart"; - reg = <0x05000800 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART2>; - dmas = <&dma 16>, <&dma 16>; - dma-names = "tx", "rx"; - resets = <&ccu RST_BUS_UART2>; - status = "disabled"; - }; - - uart3: serial@5000c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x05000c00 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART3>; - dmas = <&dma 17>, <&dma 17>; - dma-names = "tx", "rx"; - resets = <&ccu RST_BUS_UART3>; - status = "disabled"; - }; - - uart4: serial@5001000 { - compatible = "snps,dw-apb-uart"; - reg = <0x05001000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART4>; - dmas = <&dma 18>, <&dma 18>; - dma-names = "tx", "rx"; - resets = <&ccu RST_BUS_UART4>; - status = "disabled"; - }; - - uart5: serial@5001400 { - compatible = "snps,dw-apb-uart"; - reg = <0x05001400 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART5>; - dmas = <&dma 19>, <&dma 19>; - dma-names = "tx", "rx"; - resets = <&ccu RST_BUS_UART5>; - status = "disabled"; - }; - - i2c0: i2c@5002000 { - compatible = "allwinner,sun50i-h616-i2c", - "allwinner,sun8i-v536-i2c", - "allwinner,sun6i-a31-i2c"; - reg = <0x05002000 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_I2C0>; - dmas = <&dma 43>, <&dma 43>; - dma-names = "rx", "tx"; - resets = <&ccu RST_BUS_I2C0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@5002400 { - compatible = "allwinner,sun50i-h616-i2c", - "allwinner,sun8i-v536-i2c", - "allwinner,sun6i-a31-i2c"; - reg = <0x05002400 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_I2C1>; - dmas = <&dma 44>, <&dma 44>; - dma-names = "rx", "tx"; - resets = <&ccu RST_BUS_I2C1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@5002800 { - compatible = "allwinner,sun50i-h616-i2c", - "allwinner,sun8i-v536-i2c", - "allwinner,sun6i-a31-i2c"; - reg = <0x05002800 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_I2C2>; - dmas = <&dma 45>, <&dma 45>; - dma-names = "rx", "tx"; - resets = <&ccu RST_BUS_I2C2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c3: i2c@5002c00 { - compatible = "allwinner,sun50i-h616-i2c", - "allwinner,sun8i-v536-i2c", - "allwinner,sun6i-a31-i2c"; - reg = <0x05002c00 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_I2C3>; - dmas = <&dma 46>, <&dma 46>; - dma-names = "rx", "tx"; - resets = <&ccu RST_BUS_I2C3>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c4: i2c@5003000 { - compatible = "allwinner,sun50i-h616-i2c", - "allwinner,sun8i-v536-i2c", - "allwinner,sun6i-a31-i2c"; - reg = <0x05003000 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_I2C4>; - dmas = <&dma 47>, <&dma 47>; - dma-names = "rx", "tx"; - resets = <&ccu RST_BUS_I2C4>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi0: spi@5010000 { - compatible = "allwinner,sun50i-h616-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x05010000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - dmas = <&dma 22>, <&dma 22>; - dma-names = "rx", "tx"; - resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@5011000 { - compatible = "allwinner,sun50i-h616-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x05011000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; - clock-names = "ahb", "mod"; - dmas = <&dma 23>, <&dma 23>; - dma-names = "rx", "tx"; - resets = <&ccu RST_BUS_SPI1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emac0: ethernet@5020000 { - compatible = "allwinner,sun50i-h616-emac0", - "allwinner,sun50i-a64-emac"; - reg = <0x05020000 0x10000>; - interrupts = ; - interrupt-names = "macirq"; - clocks = <&ccu CLK_BUS_EMAC0>; - clock-names = "stmmaceth"; - resets = <&ccu RST_BUS_EMAC0>; - reset-names = "stmmaceth"; - syscon = <&syscon>; - status = "disabled"; - - mdio0: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - spdif: spdif@5093000 { - compatible = "allwinner,sun50i-h616-spdif"; - reg = <0x05093000 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; - clock-names = "apb", "spdif"; - resets = <&ccu RST_BUS_SPDIF>; - dmas = <&dma 2>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pin>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ths: thermal-sensor@5070400 { - compatible = "allwinner,sun50i-h616-ths"; - reg = <0x05070400 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_THS>; - clock-names = "bus"; - resets = <&ccu RST_BUS_THS>; - nvmem-cells = <&ths_calibration>; - nvmem-cell-names = "calibration"; - allwinner,sram = <&syscon>; - #thermal-sensor-cells = <1>; - }; - - usbotg: usb@5100000 { - compatible = "allwinner,sun50i-h616-musb", - "allwinner,sun8i-h3-musb"; - reg = <0x05100000 0x0400>; - clocks = <&ccu CLK_BUS_OTG>; - resets = <&ccu RST_BUS_OTG>; - interrupts = ; - interrupt-names = "mc"; - phys = <&usbphy 0>; - phy-names = "usb"; - extcon = <&usbphy 0>; - status = "disabled"; - }; - - usbphy: phy@5100400 { - compatible = "allwinner,sun50i-h616-usb-phy"; - reg = <0x05100400 0x24>, - <0x05101800 0x14>, - <0x05200800 0x14>, - <0x05310800 0x14>, - <0x05311800 0x14>; - reg-names = "phy_ctrl", - "pmu0", - "pmu1", - "pmu2", - "pmu3"; - clocks = <&ccu CLK_USB_PHY0>, - <&ccu CLK_USB_PHY1>, - <&ccu CLK_USB_PHY2>, - <&ccu CLK_USB_PHY3>, - <&ccu CLK_BUS_EHCI2>; - clock-names = "usb0_phy", - "usb1_phy", - "usb2_phy", - "usb3_phy", - "pmu2_clk"; - resets = <&ccu RST_USB_PHY0>, - <&ccu RST_USB_PHY1>, - <&ccu RST_USB_PHY2>, - <&ccu RST_USB_PHY3>; - reset-names = "usb0_reset", - "usb1_reset", - "usb2_reset", - "usb3_reset"; - status = "disabled"; - #phy-cells = <1>; - }; - - ehci0: usb@5101000 { - compatible = "allwinner,sun50i-h616-ehci", - "generic-ehci"; - reg = <0x05101000 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_OHCI0>, - <&ccu CLK_BUS_EHCI0>, - <&ccu CLK_USB_OHCI0>; - resets = <&ccu RST_BUS_OHCI0>, - <&ccu RST_BUS_EHCI0>; - phys = <&usbphy 0>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@5101400 { - compatible = "allwinner,sun50i-h616-ohci", - "generic-ohci"; - reg = <0x05101400 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_OHCI0>, - <&ccu CLK_USB_OHCI0>; - resets = <&ccu RST_BUS_OHCI0>; - phys = <&usbphy 0>; - phy-names = "usb"; - status = "disabled"; - }; - - ehci1: usb@5200000 { - compatible = "allwinner,sun50i-h616-ehci", - "generic-ehci"; - reg = <0x05200000 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_OHCI1>, - <&ccu CLK_BUS_EHCI1>, - <&ccu CLK_USB_OHCI1>; - resets = <&ccu RST_BUS_OHCI1>, - <&ccu RST_BUS_EHCI1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci1: usb@5200400 { - compatible = "allwinner,sun50i-h616-ohci", - "generic-ohci"; - reg = <0x05200400 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_OHCI1>, - <&ccu CLK_USB_OHCI1>; - resets = <&ccu RST_BUS_OHCI1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ehci2: usb@5310000 { - compatible = "allwinner,sun50i-h616-ehci", - "generic-ehci"; - reg = <0x05310000 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_OHCI2>, - <&ccu CLK_BUS_EHCI2>, - <&ccu CLK_USB_OHCI2>; - resets = <&ccu RST_BUS_OHCI2>, - <&ccu RST_BUS_EHCI2>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci2: usb@5310400 { - compatible = "allwinner,sun50i-h616-ohci", - "generic-ohci"; - reg = <0x05310400 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_OHCI2>, - <&ccu CLK_USB_OHCI2>; - resets = <&ccu RST_BUS_OHCI2>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - ehci3: usb@5311000 { - compatible = "allwinner,sun50i-h616-ehci", - "generic-ehci"; - reg = <0x05311000 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_OHCI3>, - <&ccu CLK_BUS_EHCI3>, - <&ccu CLK_USB_OHCI3>; - resets = <&ccu RST_BUS_OHCI3>, - <&ccu RST_BUS_EHCI3>; - phys = <&usbphy 3>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci3: usb@5311400 { - compatible = "allwinner,sun50i-h616-ohci", - "generic-ohci"; - reg = <0x05311400 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_OHCI3>, - <&ccu CLK_USB_OHCI3>; - resets = <&ccu RST_BUS_OHCI3>; - phys = <&usbphy 3>; - phy-names = "usb"; - status = "disabled"; - }; - - rtc: rtc@7000000 { - compatible = "allwinner,sun50i-h616-rtc"; - reg = <0x07000000 0x400>; - interrupts = ; - clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>, - <&ccu CLK_PLL_SYSTEM_32K>; - clock-names = "bus", "hosc", - "pll-32k"; - #clock-cells = <1>; - }; - - r_ccu: clock@7010000 { - compatible = "allwinner,sun50i-h616-r-ccu"; - reg = <0x07010000 0x210>; - clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, - <&ccu CLK_PLL_PERIPH0>; - clock-names = "hosc", "losc", "iosc", "pll-periph"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - nmi_intc: interrupt-controller@7010320 { - compatible = "allwinner,sun50i-h616-nmi", - "allwinner,sun9i-a80-nmi"; - reg = <0x07010320 0xc>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = ; - }; - - r_pio: pinctrl@7022000 { - compatible = "allwinner,sun50i-h616-r-pinctrl"; - reg = <0x07022000 0x400>; - clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, - <&rtc CLK_OSC32K>; - clock-names = "apb", "hosc", "losc"; - gpio-controller; - #gpio-cells = <3>; - - /omit-if-no-ref/ - r_i2c_pins: r-i2c-pins { - pins = "PL0", "PL1"; - function = "s_i2c"; - }; - - r_rsb_pins: r-rsb-pins { - pins = "PL0", "PL1"; - function = "s_rsb"; - }; - }; - - ir: ir@7040000 { - compatible = "allwinner,sun50i-h616-ir", - "allwinner,sun6i-a31-ir"; - reg = <0x07040000 0x400>; - interrupts = ; - clocks = <&r_ccu CLK_R_APB1_IR>, - <&r_ccu CLK_IR>; - clock-names = "apb", "ir"; - resets = <&r_ccu RST_R_APB1_IR>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_rx_pin>; - status = "disabled"; - }; - - r_i2c: i2c@7081400 { - compatible = "allwinner,sun50i-h616-i2c", - "allwinner,sun8i-v536-i2c", - "allwinner,sun6i-a31-i2c"; - reg = <0x07081400 0x400>; - interrupts = ; - clocks = <&r_ccu CLK_R_APB2_I2C>; - dmas = <&dma 48>, <&dma 48>; - dma-names = "rx", "tx"; - resets = <&r_ccu RST_R_APB2_I2C>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - r_rsb: rsb@7083000 { - compatible = "allwinner,sun50i-h616-rsb", - "allwinner,sun8i-a23-rsb"; - reg = <0x07083000 0x400>; - interrupts = ; - clocks = <&r_ccu CLK_R_APB2_RSB>; - clock-frequency = <3000000>; - resets = <&r_ccu RST_R_APB2_RSB>; - pinctrl-names = "default"; - pinctrl-0 = <&r_rsb_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - thermal-zones { - cpu-thermal { - polling-delay-passive = <500>; - polling-delay = <1000>; - thermal-sensors = <&ths 2>; - sustainable-power = <1000>; - - trips { - cpu_threshold: cpu-trip-0 { - temperature = <60000>; - type = "passive"; - hysteresis = <0>; - }; - cpu_target: cpu-trip-1 { - temperature = <70000>; - type = "passive"; - hysteresis = <0>; - }; - cpu_critical: cpu-trip-2 { - temperature = <110000>; - type = "critical"; - hysteresis = <0>; - }; - }; - }; - - gpu-thermal { - polling-delay-passive = <500>; - polling-delay = <1000>; - thermal-sensors = <&ths 0>; - sustainable-power = <1100>; - - trips { - gpu_temp_critical: gpu-trip-0 { - temperature = <110000>; - type = "critical"; - hysteresis = <0>; - }; - }; - }; - - ve-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&ths 1>; - - trips { - ve_temp_critical: ve-trip-0 { - temperature = <110000>; - type = "critical"; - hysteresis = <0>; - }; - }; - }; - - ddr-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&ths 3>; - - trips { - ddr_temp_critical: ddr-trip-0 { - temperature = <110000>; - type = "critical"; - hysteresis = <0>; - }; - }; - }; - }; -}; diff --git a/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi b/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi deleted file mode 100644 index e92d150aaf..0000000000 --- a/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi +++ /dev/null @@ -1,80 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) Jisheng Zhang - */ - -#include "sun50i-h616.dtsi" -#include "sun50i-h616-cpu-opp.dtsi" - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - vmmc-supply = <®_dldo1>; - vqmmc-supply = <®_aldo1>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - status = "okay"; -}; - -&r_i2c { - status = "okay"; - - axp313: pmic@36 { - compatible = "x-powers,axp313a"; - reg = <0x36>; - #interrupt-cells = <1>; - interrupt-controller; - - regulators { - reg_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-1v8-pll"; - }; - - reg_dldo1: dldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-3v3-io"; - }; - - reg_dcdc1: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <990000>; - regulator-name = "vdd-gpu-sys"; - }; - - reg_dcdc2: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdc3: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-dram"; - }; - }; - }; -}; - -&pio { - vcc-pc-supply = <®_dldo1>; - vcc-pf-supply = <®_dldo1>; - vcc-pg-supply = <®_aldo1>; - vcc-ph-supply = <®_dldo1>; - vcc-pi-supply = <®_dldo1>; -}; diff --git a/arch/arm/dts/sun50i-h618-longanpi-3h.dts b/arch/arm/dts/sun50i-h618-longanpi-3h.dts deleted file mode 100644 index 18b29c6b86..0000000000 --- a/arch/arm/dts/sun50i-h618-longanpi-3h.dts +++ /dev/null @@ -1,144 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) Jisheng Zhang - */ - -/dts-v1/; - -#include "sun50i-h618-longan-module-3h.dtsi" - -#include -#include -#include - -/ { - model = "Sipeed Longan Pi 3H"; - compatible = "sipeed,longan-pi-3h", "sipeed,longan-module-3h", "allwinner,sun50i-h618"; - - aliases { - ethernet0 = &emac0; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <0>; - gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */ - }; - - led-1 { - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - gpios = <&pio 6 4 GPIO_ACTIVE_LOW>; /* PG4 */ - }; - }; - - reg_vcc5v: regulator-vcc5v { - /* board wide 5V supply directly from the USB-C socket */ - compatible = "regulator-fixed"; - regulator-name = "vcc-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_vcc3v3: regulator-vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <®_vcc5v>; - }; -}; - -&axp313 { - vin1-supply = <®_vcc5v>; - vin2-supply = <®_vcc5v>; - vin3-supply = <®_vcc5v>; -}; - -&ehci1 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -/* WiFi & BT combo module is connected to this Host */ -&ehci3 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&emac0 { - pinctrl-names = "default"; - pinctrl-0 = <&ext_rgmii_pins>; - phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; - allwinner,rx-delay-ps = <3100>; - allwinner,tx-delay-ps = <700>; - phy-supply = <®_vcc3v3>; - status = "okay"; -}; - -&mdio0 { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - -&mmc0 { - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - vmmc-supply = <®_vcc3v3>; - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&usbotg { - /* - * PHY0 pins are connected to a USB-C socket, but a role switch - * is not implemented: both CC pins are pulled to GND. - * The VBUS pins power the device, so a fixed peripheral mode - * is the best choice. - * The board can be powered via GPIOs, in this case port0 *can* - * act as a host (with a cable/adapter ignoring CC), as VBUS is - * then provided by the GPIOs. Any user of this setup would - * need to adjust the DT accordingly: dr_mode set to "host", - * enabling OHCI0 and EHCI0. - */ - dr_mode = "peripheral"; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_vcc5v>; - usb2_vbus-supply = <®_vcc5v>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts b/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts deleted file mode 100644 index 6a4f0da972..0000000000 --- a/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2023 Arm Ltd. - */ - -/dts-v1/; - -#include "sun50i-h616.dtsi" -#include "sun50i-h616-cpu-opp.dtsi" - -#include -#include -#include - -/ { - model = "OrangePi Zero 2W"; - compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ - }; - }; - - reg_vcc5v: vcc5v { - /* board wide 5V supply directly from the USB-C socket */ - compatible = "regulator-fixed"; - regulator-name = "vcc-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_vcc3v3: vcc3v3 { - /* SY8089 DC/DC converter */ - compatible = "regulator-fixed"; - regulator-name = "vcc-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <®_vcc5v>; - regulator-always-on; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci1 { - status = "okay"; -}; - -/* USB 2 & 3 are on the FPC connector (or the exansion board) */ - -&mmc0 { - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - bus-width = <4>; - vmmc-supply = <®_vcc3v3>; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&pio { - vcc-pc-supply = <®_dldo1>; - vcc-pf-supply = <®_dldo1>; /* internally via VCC-IO */ - vcc-pg-supply = <®_aldo1>; - vcc-ph-supply = <®_dldo1>; /* internally via VCC-IO */ - vcc-pi-supply = <®_dldo1>; -}; - -&r_i2c { - status = "okay"; - - axp313: pmic@36 { - compatible = "x-powers,axp313a"; - reg = <0x36>; - #interrupt-cells = <1>; - interrupt-controller; - interrupt-parent = <&pio>; - interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */ - - vin1-supply = <®_vcc5v>; - vin2-supply = <®_vcc5v>; - vin3-supply = <®_vcc5v>; - - regulators { - /* Supplies VCC-PLL and DRAM */ - reg_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8"; - }; - - /* Supplies VCC-IO, so needs to be always on. */ - reg_dldo1: dldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3"; - }; - - reg_dcdc1: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <990000>; - regulator-name = "vdd-gpu-sys"; - }; - - reg_dcdc2: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdc3: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-dram"; - }; - }; - }; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; -}; - -&usbotg { - /* - * PHY0 pins are connected to a USB-C socket, but a role switch - * is not implemented: both CC pins are pulled to GND. - * The VBUS pins power the device, so a fixed peripheral mode - * is the best choice. - * The board can be powered via GPIOs, in this case port0 *can* - * act as a host (with a cable/adapter ignoring CC), as VBUS is - * then provided by the GPIOs. Any user of this setup would - * need to adjust the DT accordingly: dr_mode set to "host", - * enabling OHCI0 and EHCI0. - */ - dr_mode = "peripheral"; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_vcc5v>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h618-orangepi-zero3.dts b/arch/arm/dts/sun50i-h618-orangepi-zero3.dts deleted file mode 100644 index e1cd7572a1..0000000000 --- a/arch/arm/dts/sun50i-h618-orangepi-zero3.dts +++ /dev/null @@ -1,101 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2023 Arm Ltd. - */ - -/dts-v1/; - -#include "sun50i-h616-orangepi-zero.dtsi" -#include "sun50i-h616-cpu-opp.dtsi" - -/ { - model = "OrangePi Zero3"; - compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&emac0 { - allwinner,tx-delay-ps = <700>; - phy-mode = "rgmii-rxid"; - phy-supply = <®_dldo1>; -}; - -&ext_rgmii_phy { - motorcomm,clk-out-frequency-hz = <125000000>; -}; - -&mmc0 { - /* - * The schematic shows the card detect pin wired up to PF6, via an - * inverter, but it just doesn't work. - */ - broken-cd; - vmmc-supply = <®_dldo1>; -}; - -&r_i2c { - status = "okay"; - - axp313: pmic@36 { - compatible = "x-powers,axp313a"; - reg = <0x36>; - #interrupt-cells = <1>; - interrupt-controller; - interrupt-parent = <&pio>; - interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */ - - vin1-supply = <®_vcc5v>; - vin2-supply = <®_vcc5v>; - vin3-supply = <®_vcc5v>; - - regulators { - /* Supplies VCC-PLL, so needs to be always on. */ - reg_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8"; - }; - - /* Supplies VCC-IO, so needs to be always on. */ - reg_dldo1: dldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3"; - }; - - reg_dcdc1: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <990000>; - regulator-name = "vdd-gpu-sys"; - }; - - reg_dcdc2: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdc3: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-dram"; - }; - }; - }; -}; - -&pio { - vcc-pc-supply = <®_dldo1>; - vcc-pf-supply = <®_dldo1>; - vcc-pg-supply = <®_aldo1>; - vcc-ph-supply = <®_dldo1>; - vcc-pi-supply = <®_dldo1>; -}; diff --git a/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts b/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts deleted file mode 100644 index d6631bfe62..0000000000 --- a/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts +++ /dev/null @@ -1,189 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2023 Arm Ltd. - */ - -/dts-v1/; - -#include "sun50i-h616.dtsi" -#include "sun50i-h616-cpu-opp.dtsi" - -#include -#include - -/ { - model = "Transpeed 8K618-T"; - compatible = "transpeed,8k618-t", "allwinner,sun50i-h618"; - - aliases { - ethernet1 = &sdio_wifi; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_vcc5v: vcc5v { - /* board wide 5V supply directly from the DC input */ - compatible = "regulator-fixed"; - regulator-name = "vcc-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_vcc3v3: vcc3v3 { - /* discrete 3.3V regulator */ - compatible = "regulator-fixed"; - regulator-name = "vcc-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - wifi_pwrseq: pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rtc CLK_OSC32K_FANOUT>; - clock-names = "ext_clock"; - pinctrl-0 = <&x32clk_fanout_pin>; - pinctrl-names = "default"; - reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ir { - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_dldo1>; - cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */ - bus-width = <4>; - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_dldo1>; - vqmmc-supply = <®_aldo1>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - sdio_wifi: wifi@1 { - reg = <1>; - }; -}; - -&mmc2 { - vmmc-supply = <®_dldo1>; - vqmmc-supply = <®_aldo1>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&r_i2c { - status = "okay"; - - axp313: pmic@36 { - compatible = "x-powers,axp313a"; - reg = <0x36>; - #interrupt-cells = <1>; - interrupt-controller; - - vin1-supply = <®_vcc5v>; - vin2-supply = <®_vcc5v>; - vin3-supply = <®_vcc5v>; - - regulators { - reg_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-1v8-pll"; - }; - - reg_dldo1: dldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-3v3-io-mmc"; - }; - - reg_dcdc1: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <990000>; - regulator-name = "vdd-gpu-sys"; - }; - - reg_dcdc2: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdc3: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1360000>; - regulator-max-microvolt = <1360000>; - regulator-name = "vdd-dram"; - }; - }; - }; -}; - -&pio { - vcc-pc-supply = <®_aldo1>; - vcc-pg-supply = <®_dldo1>; - vcc-ph-supply = <®_dldo1>; - vcc-pi-supply = <®_dldo1>; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - uart-has-rtscts; - status = "okay"; -}; - -&usbotg { - dr_mode = "host"; /* USB A type receptable */ - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts deleted file mode 100644 index ee30584b6a..0000000000 --- a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts +++ /dev/null @@ -1,327 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Copyright (C) 2024 Ryan Walklin . - */ - -/dts-v1/; - -#include "sun50i-h616.dtsi" - -#include -#include -#include -#include - -/ { - model = "Anbernic RG35XX 2024"; - chassis-type = "handset"; - compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio_keys_gamepad: gpio-keys-gamepad { - compatible = "gpio-keys"; - - button-a { - label = "Action-Pad A"; - gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ - linux,input-type = ; - linux,code = ; - }; - - button-b { - label = "Action-Pad B"; - gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ - linux,input-type = ; - linux,code = ; - }; - - button-down { - label = "D-Pad Down"; - gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; /* PE0 */ - linux,input-type = ; - linux,code = ; - }; - - button-l1 { - label = "Key L1"; - gpios = <&pio 0 10 GPIO_ACTIVE_LOW>; /* PA10 */ - linux,input-type = ; - linux,code = ; - }; - - button-l2 { - label = "Key L2"; - gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ - linux,input-type = ; - linux,code = ; - }; - - button-left { - label = "D-Pad left"; - gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ - linux,input-type = ; - linux,code = ; - }; - - button-menu { - label = "Key Menu"; - gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */ - linux,input-type = ; - linux,code = ; - }; - - button-r1 { - label = "Key R1"; - gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ - linux,input-type = ; - linux,code = ; - }; - - button-r2 { - label = "Key R2"; - gpios = <&pio 0 7 GPIO_ACTIVE_LOW>; /* PA7 */ - linux,input-type = ; - linux,code = ; - }; - - button-right { - label = "D-Pad Right"; - gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ - linux,input-type = ; - linux,code = ; - }; - - button-select { - label = "Key Select"; - gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ - linux,input-type = ; - linux,code = ; - }; - button-start { - label = "Key Start"; - gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ - linux,input-type = ; - linux,code = ; - }; - - button-up { - label = "D-Pad Up"; - gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ - linux,input-type = ; - linux,code = ; - }; - - button-x { - label = "Action-Pad X"; - gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ - linux,input-type = ; - linux,code = ; - }; - - button-y { - label = "Action Pad Y"; - gpios = <&pio 0 2 GPIO_ACTIVE_LOW>; /* PA2 */ - linux,input-type = ; - linux,code = ; - }; - }; - - gpio-keys-volume { - compatible = "gpio-keys"; - autorepeat; - - button-vol-up { - label = "Key Volume Up"; - gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; /* PE1 */ - linux,input-type = ; - linux,code = ; - }; - - button-vol-down { - label = "Key Volume Down"; - gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; /* PE2 */ - linux,input-type = ; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */ - default-state = "on"; - }; - }; - - reg_vcc5v: regulator-vcc5v { /* USB-C power input */ - compatible = "regulator-fixed"; - regulator-name = "vcc-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc1>; -}; - -&ehci0 { - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_cldo3>; - disable-wp; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - bus-width = <4>; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&pio { - vcc-pa-supply = <®_cldo3>; - vcc-pc-supply = <®_cldo3>; - vcc-pe-supply = <®_cldo3>; - vcc-pf-supply = <®_cldo3>; - vcc-pg-supply = <®_aldo4>; - vcc-ph-supply = <®_cldo3>; - vcc-pi-supply = <®_cldo3>; -}; - -&r_rsb { - status = "okay"; - - axp717: pmic@3a3 { - compatible = "x-powers,axp717"; - reg = <0x3a3>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - vin1-supply = <®_vcc5v>; - vin2-supply = <®_vcc5v>; - vin3-supply = <®_vcc5v>; - vin4-supply = <®_vcc5v>; - - regulators { - reg_dcdc1: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdc2: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <940000>; - regulator-max-microvolt = <940000>; - regulator-name = "vdd-gpu-sys"; - }; - - reg_dcdc3: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-dram"; - }; - - reg_aldo1: aldo1 { - /* 1.8v - unused */ - }; - - reg_aldo2: aldo2 { - /* 1.8v - unused */ - }; - - reg_aldo3: aldo3 { - /* 1.8v - unused */ - }; - - reg_aldo4: aldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-pg"; - }; - - reg_bldo1: bldo1 { - /* 1.8v - unused */ - }; - - reg_bldo2: bldo2 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-pll"; - }; - - reg_bldo3: bldo3 { - /* 2.8v - unused */ - }; - - reg_bldo4: bldo4 { - /* 1.2v - unused */ - }; - - reg_cldo1: cldo1 { - /* 3.3v - audio codec - not yet implemented */ - }; - - reg_cldo2: cldo2 { - /* 3.3v - unused */ - }; - - reg_cldo3: cldo3 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-io"; - }; - - reg_cldo4: cldo4 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; - }; - - reg_boost: boost { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5200000>; - regulator-name = "boost"; - }; - - reg_cpusldo: cpusldo { - /* unused */ - }; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; -}; - -/* the AXP717 has USB type-C role switch functionality, not yet described by the binding */ -&usbotg { - dr_mode = "peripheral"; /* USB type-C receptable */ - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts deleted file mode 100644 index 6303625691..0000000000 --- a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Copyright (C) 2024 Ryan Walklin . - * Copyright (C) 2024 Chris Morgan . - */ - -#include "sun50i-h700-anbernic-rg35xx-plus.dts" - -/ { - model = "Anbernic RG35XX H"; - compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700"; -}; - -&gpio_keys_gamepad { - button-thumbl { - label = "GPIO Thumb Left"; - gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ - linux,input-type = ; - linux,code = ; - }; - - button-thumbr { - label = "GPIO Thumb Right"; - gpios = <&pio 4 9 GPIO_ACTIVE_LOW>; /* PE9 */ - linux,input-type = ; - linux,code = ; - }; -}; - -&ehci1 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts deleted file mode 100644 index 60a8e49221..0000000000 --- a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Copyright (C) 2024 Ryan Walklin . - */ - -#include "sun50i-h700-anbernic-rg35xx-2024.dts" - -/ { - model = "Anbernic RG35XX Plus"; - compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700"; - - wifi_pwrseq: pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rtc CLK_OSC32K_FANOUT>; - clock-names = "ext_clock"; - pinctrl-0 = <&x32clk_fanout_pin>; - pinctrl-names = "default"; - post-power-on-delay-ms = <200>; - reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ - }; -}; - -/* SDIO WiFi RTL8821CS */ -&mmc1 { - vmmc-supply = <®_cldo4>; - vqmmc-supply = <®_aldo4>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - sdio_wifi: wifi@1 { - reg = <1>; - interrupt-parent = <&pio>; - interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */ - interrupt-names = "host-wake"; - }; -}; - -/* Bluetooth RTL8821CS */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; - device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */ - enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */ - host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */ - }; -}; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 17666814c5..227d5e7f31 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -437,6 +437,7 @@ config MACH_SUN50I_H616 select ARM64 select DRAM_SUN50I_H616 select SUN50I_GEN_H6 + imply OF_UPSTREAM endchoice diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index c4e4f8bda5..f60ee7375d 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun50i-h616-orangepi-zero2" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h616-orangepi-zero2" CONFIG_SPL=y CONFIG_DRAM_SUN50I_H616_DX_ODT=0x08080808 CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e diff --git a/configs/orangepi_zero2w_defconfig b/configs/orangepi_zero2w_defconfig index 5734d9d839..cbb702d85b 100644 --- a/configs/orangepi_zero2w_defconfig +++ b/configs/orangepi_zero2w_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-orangepi-zero2w" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h618-orangepi-zero2w" CONFIG_SPL=y CONFIG_DRAM_SUN50I_H616_DX_ODT=0x07070707 CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e diff --git a/configs/orangepi_zero3_defconfig b/configs/orangepi_zero3_defconfig index 44b7ec7887..4e9b0ec4d3 100644 --- a/configs/orangepi_zero3_defconfig +++ b/configs/orangepi_zero3_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-orangepi-zero3" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h618-orangepi-zero3" CONFIG_SPL=y CONFIG_DRAM_SUN50I_H616_DX_ODT=0x07070707 CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig index 9915fff4a0..706306b144 100644 --- a/configs/tanix_tx1_defconfig +++ b/configs/tanix_tx1_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun50i-h313-tanix-tx1" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h313-tanix-tx1" CONFIG_SPL=y CONFIG_DRAM_SUN50I_H616_DX_ODT=0x06060606 CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0d0d0d0d diff --git a/configs/transpeed-8k618-t_defconfig b/configs/transpeed-8k618-t_defconfig index 020d3974af..1d5a0c264b 100644 --- a/configs/transpeed-8k618-t_defconfig +++ b/configs/transpeed-8k618-t_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-transpeed-8k618-t" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h618-transpeed-8k618-t" CONFIG_SPL=y CONFIG_DRAM_SUN50I_H616_DX_ODT=0x03030303 CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig index 42a3b8c131..f876cc91f6 100644 --- a/configs/x96_mate_defconfig +++ b/configs/x96_mate_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun50i-h616-x96-mate" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h616-x96-mate" CONFIG_SPL=y CONFIG_DRAM_SUN50I_H616_DX_ODT=0x03030303 CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e diff --git a/include/dt-bindings/clock/sun50i-h616-ccu.h b/include/dt-bindings/clock/sun50i-h616-ccu.h deleted file mode 100644 index 6f8f01e676..0000000000 --- a/include/dt-bindings/clock/sun50i-h616-ccu.h +++ /dev/null @@ -1,116 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -/* - * Copyright (C) 2020 Arm Ltd. - */ - -#ifndef _DT_BINDINGS_CLK_SUN50I_H616_H_ -#define _DT_BINDINGS_CLK_SUN50I_H616_H_ - -#define CLK_PLL_PERIPH0 4 - -#define CLK_CPUX 21 - -#define CLK_APB1 26 - -#define CLK_DE 29 -#define CLK_BUS_DE 30 -#define CLK_DEINTERLACE 31 -#define CLK_BUS_DEINTERLACE 32 -#define CLK_G2D 33 -#define CLK_BUS_G2D 34 -#define CLK_GPU0 35 -#define CLK_BUS_GPU 36 -#define CLK_GPU1 37 -#define CLK_CE 38 -#define CLK_BUS_CE 39 -#define CLK_VE 40 -#define CLK_BUS_VE 41 -#define CLK_BUS_DMA 42 -#define CLK_BUS_HSTIMER 43 -#define CLK_AVS 44 -#define CLK_BUS_DBG 45 -#define CLK_BUS_PSI 46 -#define CLK_BUS_PWM 47 -#define CLK_BUS_IOMMU 48 - -#define CLK_MBUS_DMA 50 -#define CLK_MBUS_VE 51 -#define CLK_MBUS_CE 52 -#define CLK_MBUS_TS 53 -#define CLK_MBUS_NAND 54 -#define CLK_MBUS_G2D 55 - -#define CLK_NAND0 57 -#define CLK_NAND1 58 -#define CLK_BUS_NAND 59 -#define CLK_MMC0 60 -#define CLK_MMC1 61 -#define CLK_MMC2 62 -#define CLK_BUS_MMC0 63 -#define CLK_BUS_MMC1 64 -#define CLK_BUS_MMC2 65 -#define CLK_BUS_UART0 66 -#define CLK_BUS_UART1 67 -#define CLK_BUS_UART2 68 -#define CLK_BUS_UART3 69 -#define CLK_BUS_UART4 70 -#define CLK_BUS_UART5 71 -#define CLK_BUS_I2C0 72 -#define CLK_BUS_I2C1 73 -#define CLK_BUS_I2C2 74 -#define CLK_BUS_I2C3 75 -#define CLK_BUS_I2C4 76 -#define CLK_SPI0 77 -#define CLK_SPI1 78 -#define CLK_BUS_SPI0 79 -#define CLK_BUS_SPI1 80 -#define CLK_EMAC_25M 81 -#define CLK_BUS_EMAC0 82 -#define CLK_BUS_EMAC1 83 -#define CLK_TS 84 -#define CLK_BUS_TS 85 -#define CLK_BUS_THS 86 -#define CLK_SPDIF 87 -#define CLK_BUS_SPDIF 88 -#define CLK_DMIC 89 -#define CLK_BUS_DMIC 90 -#define CLK_AUDIO_CODEC_1X 91 -#define CLK_AUDIO_CODEC_4X 92 -#define CLK_BUS_AUDIO_CODEC 93 -#define CLK_AUDIO_HUB 94 -#define CLK_BUS_AUDIO_HUB 95 -#define CLK_USB_OHCI0 96 -#define CLK_USB_PHY0 97 -#define CLK_USB_OHCI1 98 -#define CLK_USB_PHY1 99 -#define CLK_USB_OHCI2 100 -#define CLK_USB_PHY2 101 -#define CLK_USB_OHCI3 102 -#define CLK_USB_PHY3 103 -#define CLK_BUS_OHCI0 104 -#define CLK_BUS_OHCI1 105 -#define CLK_BUS_OHCI2 106 -#define CLK_BUS_OHCI3 107 -#define CLK_BUS_EHCI0 108 -#define CLK_BUS_EHCI1 109 -#define CLK_BUS_EHCI2 110 -#define CLK_BUS_EHCI3 111 -#define CLK_BUS_OTG 112 -#define CLK_BUS_KEYADC 113 -#define CLK_HDMI 114 -#define CLK_HDMI_SLOW 115 -#define CLK_HDMI_CEC 116 -#define CLK_BUS_HDMI 117 -#define CLK_BUS_TCON_TOP 118 -#define CLK_TCON_TV0 119 -#define CLK_TCON_TV1 120 -#define CLK_BUS_TCON_TV0 121 -#define CLK_BUS_TCON_TV1 122 -#define CLK_TVE0 123 -#define CLK_BUS_TVE_TOP 124 -#define CLK_BUS_TVE0 125 -#define CLK_HDCP 126 -#define CLK_BUS_HDCP 127 -#define CLK_PLL_SYSTEM_32K 128 - -#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */ diff --git a/include/dt-bindings/reset/sun50i-h616-ccu.h b/include/dt-bindings/reset/sun50i-h616-ccu.h deleted file mode 100644 index 1bd8bb0a11..0000000000 --- a/include/dt-bindings/reset/sun50i-h616-ccu.h +++ /dev/null @@ -1,70 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -/* - * Copyright (C) 2020 Arm Ltd. - */ - -#ifndef _DT_BINDINGS_RESET_SUN50I_H616_H_ -#define _DT_BINDINGS_RESET_SUN50I_H616_H_ - -#define RST_MBUS 0 -#define RST_BUS_DE 1 -#define RST_BUS_DEINTERLACE 2 -#define RST_BUS_GPU 3 -#define RST_BUS_CE 4 -#define RST_BUS_VE 5 -#define RST_BUS_DMA 6 -#define RST_BUS_HSTIMER 7 -#define RST_BUS_DBG 8 -#define RST_BUS_PSI 9 -#define RST_BUS_PWM 10 -#define RST_BUS_IOMMU 11 -#define RST_BUS_DRAM 12 -#define RST_BUS_NAND 13 -#define RST_BUS_MMC0 14 -#define RST_BUS_MMC1 15 -#define RST_BUS_MMC2 16 -#define RST_BUS_UART0 17 -#define RST_BUS_UART1 18 -#define RST_BUS_UART2 19 -#define RST_BUS_UART3 20 -#define RST_BUS_UART4 21 -#define RST_BUS_UART5 22 -#define RST_BUS_I2C0 23 -#define RST_BUS_I2C1 24 -#define RST_BUS_I2C2 25 -#define RST_BUS_I2C3 26 -#define RST_BUS_I2C4 27 -#define RST_BUS_SPI0 28 -#define RST_BUS_SPI1 29 -#define RST_BUS_EMAC0 30 -#define RST_BUS_EMAC1 31 -#define RST_BUS_TS 32 -#define RST_BUS_THS 33 -#define RST_BUS_SPDIF 34 -#define RST_BUS_DMIC 35 -#define RST_BUS_AUDIO_CODEC 36 -#define RST_BUS_AUDIO_HUB 37 -#define RST_USB_PHY0 38 -#define RST_USB_PHY1 39 -#define RST_USB_PHY2 40 -#define RST_USB_PHY3 41 -#define RST_BUS_OHCI0 42 -#define RST_BUS_OHCI1 43 -#define RST_BUS_OHCI2 44 -#define RST_BUS_OHCI3 45 -#define RST_BUS_EHCI0 46 -#define RST_BUS_EHCI1 47 -#define RST_BUS_EHCI2 48 -#define RST_BUS_EHCI3 49 -#define RST_BUS_OTG 50 -#define RST_BUS_HDMI 51 -#define RST_BUS_HDMI_SUB 52 -#define RST_BUS_TCON_TOP 53 -#define RST_BUS_TCON_TV0 54 -#define RST_BUS_TCON_TV1 55 -#define RST_BUS_TVE_TOP 56 -#define RST_BUS_TVE0 57 -#define RST_BUS_HDCP 58 -#define RST_BUS_KEYADC 59 - -#endif /* _DT_BINDINGS_RESET_SUN50I_H616_H_ */ -- 2.39.5