From 96373c1d91ab7ec4d781d5b73828abda1419ca25 Mon Sep 17 00:00:00 2001 From: Mario Six Date: Fri, 29 Mar 2019 10:18:17 +0100 Subject: [PATCH] gazerbeam: Import Linux DT Import the Linux device tree for the Gazerbeam board. Signed-off-by: Mario Six --- arch/powerpc/dts/.gitignore | 1 + arch/powerpc/dts/Makefile | 1 + arch/powerpc/dts/gazerbeam.dts | 600 ++++++++++++++++++ arch/powerpc/dts/gdsys/gazerbeam-base.dtsi | 185 ++++++ arch/powerpc/dts/gdsys/mpc8308.dtsi | 354 +++++++++++ .../dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi | 6 + .../powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi | 6 + arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi | 5 + .../gdsys/soc/nor/flash-80k-partition.dtsi | 20 + 9 files changed, 1178 insertions(+) create mode 100644 arch/powerpc/dts/.gitignore create mode 100644 arch/powerpc/dts/gazerbeam.dts create mode 100644 arch/powerpc/dts/gdsys/gazerbeam-base.dtsi create mode 100644 arch/powerpc/dts/gdsys/mpc8308.dtsi create mode 100644 arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi create mode 100644 arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi create mode 100644 arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi create mode 100644 arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi diff --git a/arch/powerpc/dts/.gitignore b/arch/powerpc/dts/.gitignore new file mode 100644 index 0000000000..b60ed208c7 --- /dev/null +++ b/arch/powerpc/dts/.gitignore @@ -0,0 +1 @@ +*.dtb diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile index f080a96891..6a28f802c2 100644 --- a/arch/powerpc/dts/Makefile +++ b/arch/powerpc/dts/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_TARGET_T2080QDS) += t2080qds.dtb dtb-$(CONFIG_TARGET_MCR3000) += mcr3000.dtb +dtb-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.dtb targets += $(dtb-y) diff --git a/arch/powerpc/dts/gazerbeam.dts b/arch/powerpc/dts/gazerbeam.dts new file mode 100644 index 0000000000..a4408c496c --- /dev/null +++ b/arch/powerpc/dts/gazerbeam.dts @@ -0,0 +1,600 @@ +/* + * Gazerbeam CON Device Tree Source + * + * (C) Copyright 2015 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "gdsys/mpc8308.dtsi" + +/include/ "gdsys/gazerbeam-base.dtsi" + +/include/ "gdsys/soc/i2c/cirrus-audio-codec.dtsi" +/include/ "gdsys/soc/i2c/dallas-rtc.dtsi" +/include/ "gdsys/soc/lbc/gazerbeam.dtsi" +/include/ "gdsys/soc/nor/flash-80k-partition.dtsi" + +&board_lbc { + FPGA0:iocon_uart@1,0 { + reg = <0x1 0x0 0x100000>; + little-endian; + interrupts = <48 0x8>; + interrupt-parent = <&ipic>; + }; + + FPGA1:iocon_uart@2,0 { + reg = <0x2 0x0 0x100000>; + little-endian; + interrupts = <17 0x8>; + interrupt-parent = <&ipic>; + }; +}; + +&FPGA0 { + compatible = "gdsys,iocon_fpga"; + #gpio-cells = <2>; + gpio-controller; + bus = <&FPGA0BUS>; + unit_id = <0>; + fpga-type = <1>; + usb_base = <0x0080>; + audio_base = <0x0040>; + timebase_base = <0x013c>; + + /* + * for every interrupt source there must be a dataset specifying + * 1. type (1: standard) + * 2. status register offset + * 3. mask register offset + * 4. default mask + */ + fpga_interrupt_sources = + <1 0x000a 0x000c 0x4000>, /* 0: TOP_INTERRUPT */ + <1 0x001c 0x001e 0x0000>; /* 1: EXTENDED_INTERRUPT */ + /* + * for every interrupt there must be a dataset specifying + * 1. type (1: status, 2: event) + * 2. interrupt source index + * 3. interrupt register bit + * 4. mask register bit + */ + #fpga_interrupt_map-cells = <4>; + fpga_interrupt_map = + <1 0 14 14>, /* 0: EXTENDED_INTERRUPT */ + <1 0 0 0>, /* 1: VIDEO 0 */ + <1 0 1 1>, /* 2: VIDEO 1 */ + <1 0 2 2>, /* 3: VIDEO IC 0 */ + <1 0 3 3>, /* 4: VIDEO IC 1 */ + <1 0 4 4>, /* 5: IIC MAIN */ + <1 0 6 6>, /* 6: IIC VIDEO 0 */ + <1 0 7 7>, /* 7: IIC VIDEO 1 */ + <1 1 0 0>, /* 8: OSD 0 */ + <1 1 1 1>, /* 9: OSD 1 */ + <1 1 2 2>, /* 10: SPDIF 0 */ + <1 1 3 3>, /* 11: SPDIF 1 */ + <1 0 12 12>, /* 12: COMM 0 */ + <1 0 13 13>, /* 13: COMM 1 */ + <1 0 10 10>, /* 14: COMM 2 */ + <1 0 11 11>, /* 15: COMM 3 */ + <2 0 5 5>, /* 16: MDIO */ + <1 0 8 8>, /* 17: PHY */ + <1 1 4 4>, /* 18: RS232 */ + <1 1 5 5>, /* 19: AUDIO */ + <1 1 8 8>, /* 20: PROC_AUDIO */ + <1 1 7 7>, /* 21: USB/ETH-UART INT */ + <2 1 10 10>, /* 22: AXI Bridge 0 */ + <2 1 11 11>, /* 23: AXI Bridge 1 */ + <2 1 9 9>, /* 24: USB/ETH-Secondary IIC */ + <>; +}; + +&FPGA1 { + compatible = "gdsys,iocon_fpga"; + #gpio-cells = <2>; + gpio-controller; + bus = <&FPGA1BUS>; + unit_id = <1>; + fpga-type = <1>; + usb_base = <0x0070>; + audio_base = <0x0040>; + timebase_base = <0x013c>; + + /* + * for every interrupt source there must be a dataset specifying + * 1. type (1: standard) + * 2. status register offset + * 3. mask register offset + * 4. default mask + */ + fpga_interrupt_sources = + <1 0x000a 0x000c 0x4000>, /* 0: TOP_INTERRUPT */ + <1 0x001c 0x001e 0x0000>; /* 1: EXTENDED_INTERRUPT */ + /* + * for every interrupt there must be a dataset specifying + * 1. type (1: status, 2: event) + * 2. interrupt source index + * 3. interrupt register bit + * 4. mask register bit + */ + #fpga_interrupt_map-cells = <4>; + fpga_interrupt_map = + <1 0 14 14>, /* 0: EXTENDED_INTERRUPT */ + <1 0 0 0>, /* 1: VIDEO 0 */ + <1 0 1 1>, /* 2: VIDEO 1 */ + <1 0 2 2>, /* 3: VIDEO IC 0 */ + <1 0 3 3>, /* 4: VIDEO IC 1 */ + <1 0 4 4>, /* 5: IIC MAIN */ + <1 0 6 6>, /* 6: IIC VIDEO 0 */ + <1 0 7 7>, /* 7: IIC VIDEO 1 */ + <1 1 0 0>, /* 8: OSD 0 */ + <1 1 1 1>, /* 9: OSD 1 */ + <1 1 2 2>, /* 10: SPDIF 0 */ + <1 1 3 3>, /* 11: SPDIF 1 */ + <1 0 12 12>, /* 12: COMM 0 */ + <1 0 13 13>, /* 13: COMM 1 */ + <1 0 10 10>, /* 14: COMM 2 */ + <1 0 11 11>, /* 15: COMM 3 */ + <2 0 5 5>, /* 16: MDIO */ + <1 0 8 8>, /* 17: PHY */ + <1 1 4 4>, /* 18: RS232 */ + <1 1 5 5>, /* 19: AUDIO */ + <1 1 8 8>, /* 20: PROC_AUDIO */ + <1 1 7 7>, /* 21: USB/ETH-UART INT */ + <2 1 10 10>, /* 22: AXI Bridge 0 */ + <2 1 11 11>, /* 23: AXI Bridge 1 */ + <2 1 9 9>, /* 24: USB/ETH-Secondary IIC */ + <>; +}; + +/ { + FPGA0BUS: fpga0bus { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x00002000>; + + compatible = "gdsys,soc"; + + fpga0_rs232 { + compatible = "gdsys,ihs_trans_rs232"; + reg = <0x50 0x08>; + little-endian; + }; + + fpga0_uart_usb { + compatible = "gdsys,ihs_simple_uart"; + reg = <0xa0 0x08>; + little-endian; + fpga_interrupts = <21>; + line = <0>; + }; + + fpga0_iic_main { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x60 0x10>; + little-endian; + fpga_interrupts = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fpga0_dp_video0_redriver: fpga0_dp_video0_redriver { + compatible = "ti,sn75dp130"; + reg = <0x2c>; + eq-i2c-enable = <3 2 1 0 + 3 2 1 0 + 3 2 1 0 + 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */ + }; + fpga0_dp_video1_redriver: fpga0_dp_video1_redriver { + compatible = "ti,sn75dp130"; + reg = <0x2e>; + eq-i2c-enable = <3 2 1 0 + 3 2 1 0 + 3 2 1 0 + 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */ + }; + lm77@48 { + compatible = "national,lm77"; + reg = <0x48>; + }; + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + }; + ads1015@4b { + compatible = "ti,ads1015"; + reg = <0x4b>; + }; + }; + + fpga0_video0 { + compatible = "gdsys,ihs_video_out"; + reg = <0x100 0x40>; + little-endian; + fpga_interrupts = <1 8>; /* VIDEO OSD */ + osd_base = <0x180>; + osd_buffer_base = <0x1000>; + spdif_audio_base = <0x1e0>; + video_index = <0>; + video_id = <0>; + fpga-force-pos-pol; + sync-source; + fpga-pb-pixels = <2730>; /* 8192 / 3 */ + fpga-ra-lines = <2>; + video_tx = <&fpga0_dp_video0>; + clk_gen = <&fpga0_video0_clkgen>; + ddc_ci = <&fpga0_dp_video0>; + }; + + fpga0_iic_video0 { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x1c0 0x10>; + little-endian; + fpga_interrupts = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fpga0_video0_clkgen: fpga0_video0_clkgen { + compatible = "idt,ics8n3qv01"; + reg = <0x6e>; + channel = <0>; + }; + }; + + fpga0_axi_video0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gdsys,ihs_axi"; + reg = <0x170 0x10>; + little-endian; + fpga_interrupts = <22>; + + fpga0_dp_video0: fpga0_dp_video0 { + compatible = "gdsys,logicore_dp_tx"; + reg = <0x44a10000 0x1000>; + little-endian; + redriver = <&fpga0_dp_video0_redriver>; + video_id = <0>; + }; + }; + + fpga0_video1 { + compatible = "gdsys,ihs_video_out"; + reg = <0x200 0x40>; + little-endian; + fpga_interrupts = <2 9>; /* VIDEO OSD */ + osd_base = <0x280>; + osd_buffer_base = <0x2000>; + spdif_audio_base = <0x2e0>; + video_index = <1>; + video_id = <1>; + fpga-force-pos-pol; + sync-source; + fpga-pb-pixels = <2730>; /* 8192 / 3 */ + fpga-ra-lines = <2>; + video_tx = <&fpga0_dp_video1>; + clk_gen = <&fpga0_video1_clkgen>; + ddc_ci = <&fpga0_dp_video1>; + }; + + fpga0_iic_video1 { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x2c0 0x10>; + little-endian; + fpga_interrupts = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fpga0_video1_clkgen: fpga0_video1_clkgen { + compatible = "idt,ics8n3qv01"; + reg = <0x6e>; + channel = <1>; + }; + }; + + fpga0_axi_video1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gdsys,ihs_axi"; + reg = <0x270 0x10>; + little-endian; + fpga_interrupts = <23>; + + fpga0_dp_video1: fpga0_dp_video1 { + compatible = "gdsys,logicore_dp_tx"; + reg = <0x44a10000 0x1000>; + little-endian; + redriver = <&fpga0_dp_video1_redriver>; + video_id = <1>; + }; + }; + + fpga0_iic_usb { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0xb0 0x10>; + little-endian; + fpga_interrupts = <24>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + + fpga0_ep0 { + compatible = "gdsys,io-endpoint"; + reg = < 0x020 0x10 + 0x320 0x10 + 0x340 0x10 + 0x360 0x10>; + little-endian; + irq-model-local; + fpga_interrupts = <12 13 14 15>; + pollcycle = <200>; + nprot_channel = <16>; + uart_line = <0>; + ep_index = <0>; + line_protocol = <1>; + }; + + fpga0_mdio { + compatible = "gdsys,ihs_mdiomaster"; + reg = <0x0058 0x10>; + little-endian; + fpga_interrupts = <16>; + #address-cells = <1>; + #size-cells = <0>; + + fpga0_phy0 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <0>; + }; + fpga0_phy1 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <1>; + }; + fpga0_phy2 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <2>; + }; + fpga0_phy3 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <3>; + }; + }; + + }; + + + FPGA1BUS: fpga1bus { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x00002000>; + + compatible = "gdsys,soc"; + + fpga1_uart_usb { + compatible = "gdsys,ihs_simple_uart"; + reg = <0xa0 0x08>; + little-endian; + fpga_interrupts = <21>; + line = <4>; /* TODO check and FIX */ + }; + + fpga1_iic_main { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x60 0x10>; + little-endian; + fpga_interrupts = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fpga1_dp_video0_redriver: fpga1_dp_video0_redriver { + compatible = "ti,sn75dp130"; + reg = <0x2c>; + eq-i2c-enable = <3 2 1 0 + 3 2 1 0 + 3 2 1 0 + 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */ + }; + fpga1_dp_video1_redriver: fpga1_dp_video1_redriver { + compatible = "ti,sn75dp130"; + reg = <0x2e>; + eq-i2c-enable = <3 2 1 0 + 3 2 1 0 + 3 2 1 0 + 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */ + }; + lm77@48 { + compatible = "national,lm77"; + reg = <0x48>; + }; + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + }; + ads1015@4b { + compatible = "ti,ads1015"; + reg = <0x4b>; + }; + }; + + fpga1_video0 { + compatible = "gdsys,ihs_video_out"; + reg = <0x100 0x40>; + little-endian; + fpga_interrupts = <1 8>; /* VIDEO OSD */ + osd_base = <0x180>; + osd_buffer_base = <0x1000>; + spdif_audio_base = <0x1e0>; + video_index = <0>; + video_id = <4>; + fpga-force-pos-pol; + sync-source; + fpga-pb-pixels = <2730>; /* 8192 / 3 */ + fpga-ra-lines = <2>; + video_tx = <&fpga1_dp_video0>; + clk_gen = <&fpga1_video0_clkgen>; + ddc_ci = <&fpga1_dp_video0>; + }; + + fpga1_iic_video0 { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x1c0 0x10>; + little-endian; + fpga_interrupts = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fpga1_video0_clkgen: fpga1_video0_clkgen { + compatible = "idt,ics8n3qv01"; + reg = <0x6e>; + channel = <4>; + }; + }; + + fpga1_axi_video0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gdsys,ihs_axi"; + reg = <0x170 0x10>; + little-endian; + fpga_interrupts = <22>; + + fpga1_dp_video0: fpga1_dp_video0 { + compatible = "gdsys,logicore_dp_tx"; + reg = <0x44a10000 0x1000>; + little-endian; + redriver = <&fpga1_dp_video0_redriver>; + video_id = <4>; + }; + }; + + fpga1_video1 { + compatible = "gdsys,ihs_video_out"; + reg = <0x200 0x40>; + little-endian; + fpga_interrupts = <2 9>; /* VIDEO OSD */ + osd_base = <0x280>; + osd_buffer_base = <0x2000>; + spdif_audio_base = <0x2e0>; + video_index = <1>; + video_id = <5>; + fpga-force-pos-pol; + sync-source; + fpga-pb-pixels = <2730>; /* 8192 / 3 */ + fpga-ra-lines = <2>; + video_tx = <&fpga1_dp_video1>; + clk_gen = <&fpga1_video1_clkgen>; + ddc_ci = <&fpga1_dp_video1>; + }; + + fpga1_iic_video1 { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x2c0 0x10>; + little-endian; + fpga_interrupts = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fpga1_video1_clkgen: fpga1_video1_clkgen { + compatible = "idt,ics8n3qv01"; + reg = <0x6e>; + channel = <5>; + }; + }; + + fpga1_axi_video1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gdsys,ihs_axi"; + reg = <0x270 0x10>; + little-endian; + fpga_interrupts = <23>; + + fpga1_dp_video1: fpga1_dp_video1 { + compatible = "gdsys,logicore_dp_tx"; + reg = <0x44a10000 0x1000>; + little-endian; + redriver = <&fpga1_dp_video1_redriver>; + video_id = <5>; + }; + }; + + fpga1_iic_usb { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0xb0 0x10>; + little-endian; + fpga_interrupts = <24>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + + fpga1_ep0 { + compatible = "gdsys,io-endpoint"; + reg = < 0x020 0x10 + 0x320 0x10 + 0x340 0x10 + 0x360 0x10>; + little-endian; + irq-model-local; + fpga_interrupts = <12 13 14 15>; + pollcycle = <200>; + nprot_channel = <17>; + uart_line = <1>; + ep_index = <0>; + line_protocol = <1>; + }; + + fpga1_mdio { + compatible = "gdsys,ihs_mdiomaster"; + reg = <0x0058 0x10>; + little-endian; + fpga_interrupts = <16>; + #address-cells = <1>; + #size-cells = <0>; + + fpga1_phy0 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <0>; + }; + fpga1_phy1 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <1>; + }; + fpga1_phy2 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <2>; + }; + fpga1_phy3 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <3>; + }; + }; + + }; + +}; diff --git a/arch/powerpc/dts/gdsys/gazerbeam-base.dtsi b/arch/powerpc/dts/gdsys/gazerbeam-base.dtsi new file mode 100644 index 0000000000..aca05f2cd0 --- /dev/null +++ b/arch/powerpc/dts/gdsys/gazerbeam-base.dtsi @@ -0,0 +1,185 @@ +/* + * Gazerbeam Device Tree Source + * + * (C) Copyright 2015 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "gdsys,gazerbeam"; + compatible = "fsl,mpc8308rdb"; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + }; + + memory { + device_type = "memory"; + }; +}; + +&enet1 { + status = "okay"; +}; + +&IIC { + fsl,preserve-clocking; + + at97sc3205t@29 { + compatible = "atmel,at97sc3204t"; + reg = <0x29>; + }; + + lm77@48 { + compatible = "national,lm77"; + reg = <0x48>; + }; + + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + }; + + lm77@4a { + compatible = "national,lm77"; + reg = <0x4a>; + }; + + emc2305@2e { + compatible = "smsc,emc2305"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2e>; + fan@0 { + reg = <0>; + }; + fan@1 { + reg = <1>; + }; + fan@2 { + reg = <2>; + }; + fan@3 { + reg = <3>; + }; + fan@4 { + reg = <4>; + }; + }; + + emc2305@4c { + compatible = "smsc,emc2305"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4c>; + fan@0 { + reg = <0>; + }; + fan@1 { + reg = <1>; + }; + fan@2 { + reg = <2>; + }; + fan@3 { + reg = <3>; + }; + fan@4 { + reg = <4>; + }; + }; + + at24c512@54 { + compatible = "atmel,24c512"; + reg = <0x54>; + }; + + /* PPC-Board */ + pca9698@22 { + compatible = "nxp,pca9698"; + reg = <0x22>; + #gpio-cells = <2>; + gpio-controller; + }; + + /* IO-Board */ + pca9698@20 { + compatible = "nxp,pca9698"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&IIC2 { + fsl,preserve-clocking; + + status = "okay"; + + /* MC2/SC-Board */ + GPIO_VB0: pca9698@20 { + compatible = "nxp,pca9698"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; + + /* MC4-Board */ + GPIO_VB1: pca9698@22 { + compatible = "nxp,pca9698"; + reg = <0x22>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&SPI { + gpios = < /*SPI-CSS-FPGA-U-FLASH#*/ &gpio0 8 0 + /*SPI-CSS-FPGA-O-FLASH#*/ &gpio0 6 0 + /*SPI-CSS-STDP1_U-FLASH#*/ &gpio0 12 0 + /*SPI-CSS-STDP2_U-FLASH#*/ &gpio0 11 0 + /*SPI-CSS-STDP1_O-FLASH#*/ &gpio0 15 0 + /*SPI-CSS-STDP2_O-FLASH#*/ &gpio0 3 0>; + + m25p16@0 { + compatible = "st,n25q128a11"; + reg = <0x0>; + spi-max-frequency = <20000000>; + }; + + m25p16@1 { + compatible = "st,n25q128a11"; + reg = <0x1>; + spi-max-frequency = <20000000>; + }; + + m25p16@2 { + compatible = "st,m25p40"; + reg = <0x2>; + spi-max-frequency = <20000000>; + }; + + m25p16@3 { + compatible = "st,m25p40"; + reg = <0x3>; + spi-max-frequency = <20000000>; + }; + + m25p16@4 { + compatible = "st,m25p40"; + reg = <0x4>; + spi-max-frequency = <20000000>; + }; + + m25p16@5 { + compatible = "st,m25p40"; + reg = <0x5>; + spi-max-frequency = <20000000>; + }; +}; diff --git a/arch/powerpc/dts/gdsys/mpc8308.dtsi b/arch/powerpc/dts/gdsys/mpc8308.dtsi new file mode 100644 index 0000000000..23e7403d91 --- /dev/null +++ b/arch/powerpc/dts/gdsys/mpc8308.dtsi @@ -0,0 +1,354 @@ +/* + * Basic platform for gdsys mpc8308 based devices + * + * (C) Copyright 2014 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * based on mpc8308rdb + * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +#include + +/ { + compatible = "fsl,mpc8308rdb"; + + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + memory { + device_type = "memory"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + board_lbc: localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + }; + + board_soc: immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8308-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + memory@2000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc83xx-mem-controller"; + reg = <0x2000 0x1000>; + device_type = "memory"; + + driver_software_override = ; + p_impedance_override = ; + n_impedance_override = ; + odt_termination_value = ; + ddr_type = ; + + clock_adjust = ; + + read_to_write = <0>; + write_to_read = <0>; + read_to_read = <0>; + write_to_write = <0>; + active_powerdown_exit = <2>; + precharge_powerdown_exit = <6>; + odt_powerdown_exit = <8>; + mode_reg_set_cycle = <2>; + + precharge_to_activate = <2>; + activate_to_precharge = <6>; + activate_to_readwrite = <2>; + mcas_latency = ; + refresh_recovery = <17>; + last_data_to_precharge = <2>; + activate_to_activate = <2>; + last_write_data_to_read = <2>; + + additive_latency = <0>; + mcas_to_preamble_override = ; + write_latency = <3>; + read_to_precharge = <2>; + write_cmd_to_write_data = ; + minimum_cke_pulse_width = <3>; + four_activates_window = <5>; + + self_refresh = ; + sdram_type = ; + databus_width = ; + + force_self_refresh = ; + dll_reset = ; + dqs_config = ; + odt_config = ; + posted_refreshes = <1>; + + refresh_interval = <2084>; + precharge_interval = <256>; + + sdmode = <0x0242>; + esdmode = <0x0440>; + + ram@0 { + reg = <0x0 0x0 0x8000000>; + compatible = "nanya,nt5tu64m16hg"; + + odt_rd_cfg = ; + odt_wr_cfg = ; + bank_bits = <3>; + row_bits = <13>; + col_bits = <10>; + }; + }; + + IIC:i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + IIC2: i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + status = "disabled"; + }; + + SPI:spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + sdhc@2e000 { + compatible = "fsl,esdhc", "fsl,mpc8308-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,auto-cmd12; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio0: gpio@c00 { + #gpio-cells = <2>; + device_type = "gpio"; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + dma@2c000 { + compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma"; + reg = <0x2c000 0x1800>; + interrupts = <3 0x8 + 94 0x8>; + interrupt-parent = < &ipic >; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar", "fsl,tsec"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; + phy-handle = < &phy1 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + phy2: ethernet-phy@0 { + reg = <0x0>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar", "fsl,tsec"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy2 >; + status = "disabled"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi b/arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi new file mode 100644 index 0000000000..9787e09648 --- /dev/null +++ b/arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi @@ -0,0 +1,6 @@ +&IIC { + cs4265@4f { + compatible = "cirrus,cs4265"; + reg = <0x0000004f>; + }; +}; diff --git a/arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi b/arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi new file mode 100644 index 0000000000..336bdcaf2e --- /dev/null +++ b/arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi @@ -0,0 +1,6 @@ +&IIC { + ds1339@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; diff --git a/arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi b/arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi new file mode 100644 index 0000000000..5ff58c28e5 --- /dev/null +++ b/arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi @@ -0,0 +1,5 @@ +&board_lbc { + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00003000 + 0x2 0x0 0xe0700000 0x00003000>; +}; diff --git a/arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi b/arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi new file mode 100644 index 0000000000..c6cc1409e0 --- /dev/null +++ b/arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi @@ -0,0 +1,20 @@ +&board_lbc { + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x100000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x80000>; + }; + env@80000 { + reg = <0x80000 0x10000>; + }; + env1@90000 { + reg = <0x90000 0x10000>; + }; + }; +}; -- 2.39.5