From 931a1d2a14191266b675fe9db9afd227e372a919 Mon Sep 17 00:00:00 2001 From: "Albert ARIBAUD \\(3ADEV\\)" Date: Mon, 21 Sep 2015 22:43:39 +0200 Subject: [PATCH] vf610: add support for Phytec PCM052 Devices supported are: - NFC (NAND FLASH) - MMC - QSPI (SPI NOR FLASH) - I2C (only bus 2) - I2C RTC - I2C EEPROM - FEC Patch-series: 2 - remove useless CONFIG_SYS_SPD_BUS_NUM from config - remove include of config_cmd_default.h - remove duplicate CONFIG_CMD_NET Signed-off-by: Albert ARIBAUD (3ADEV) --- arch/arm/Kconfig | 5 + board/phytec/pcm052/Kconfig | 15 + board/phytec/pcm052/MAINTAINERS | 6 + board/phytec/pcm052/Makefile | 7 + board/phytec/pcm052/imximage.cfg | 17 + board/phytec/pcm052/pcm052.c | 515 +++++++++++++++++++++++++++++++ configs/pcm052_defconfig | 6 + include/configs/pcm052.h | 231 ++++++++++++++ 8 files changed, 802 insertions(+) create mode 100644 board/phytec/pcm052/Kconfig create mode 100644 board/phytec/pcm052/MAINTAINERS create mode 100644 board/phytec/pcm052/Makefile create mode 100644 board/phytec/pcm052/imximage.cfg create mode 100644 board/phytec/pcm052/pcm052.c create mode 100644 configs/pcm052_defconfig create mode 100644 include/configs/pcm052.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0b07e08db6..3a336e6fdf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -538,6 +538,10 @@ config TARGET_COLIBRI_VF bool "Support Colibri VF50/61" select CPU_V7 +config TARGET_PCM052 + bool "Support pcm-052" + select CPU_V7 + config ARCH_ZYNQ bool "Xilinx Zynq Platform" select CPU_V7 @@ -753,6 +757,7 @@ source "board/maxbcm/Kconfig" source "board/mpl/vcma9/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" source "board/phytec/pcm051/Kconfig" +source "board/phytec/pcm052/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/samsung/smdk2410/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" diff --git a/board/phytec/pcm052/Kconfig b/board/phytec/pcm052/Kconfig new file mode 100644 index 0000000000..d67a69a747 --- /dev/null +++ b/board/phytec/pcm052/Kconfig @@ -0,0 +1,15 @@ +if TARGET_PCM052 + +config SYS_BOARD + default "pcm052" + +config SYS_VENDOR + default "phytec" + +config SYS_SOC + default "vf610" + +config SYS_CONFIG_NAME + default "pcm052" + +endif diff --git a/board/phytec/pcm052/MAINTAINERS b/board/phytec/pcm052/MAINTAINERS new file mode 100644 index 0000000000..a877436bd3 --- /dev/null +++ b/board/phytec/pcm052/MAINTAINERS @@ -0,0 +1,6 @@ +PCM052 BOARD +M: Albert ARIBAUD (3ADEV) +S: Maintained +F: board/phytec/pcm052/ +F: include/configs/pcm052.h +F: configs/pcm052_defconfig diff --git a/board/phytec/pcm052/Makefile b/board/phytec/pcm052/Makefile new file mode 100644 index 0000000000..144f4e7316 --- /dev/null +++ b/board/phytec/pcm052/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := pcm052.o diff --git a/board/phytec/pcm052/imximage.cfg b/board/phytec/pcm052/imximage.cfg new file mode 100644 index 0000000000..f5a97475cb --- /dev/null +++ b/board/phytec/pcm052/imximage.cfg @@ -0,0 +1,17 @@ +/* + * Copyright 2015 3ADEV + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +#include + +/* image version */ +IMAGE_VERSION 2 + +/* Boot Offset 0x400, valid for both SD and NAND boot */ +BOOT_OFFSET FLASH_OFFSET_STANDARD diff --git a/board/phytec/pcm052/pcm052.c b/board/phytec/pcm052/pcm052.c new file mode 100644 index 0000000000..e4f61e1b92 --- /dev/null +++ b/board/phytec/pcm052/pcm052.c @@ -0,0 +1,515 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Default DDR pad settings in arch/arm/include/asm/arch-vf610/iomux-vf610.h + * do not match our settings. Let us (re)define our own settings here. + */ + +#define PCM052_VF610_DDR_PAD_CTRL PAD_CTL_DSE_20ohm +#define PCM052_VF610_DDR_PAD_CTRL_1 (PAD_CTL_DSE_20ohm | \ + PAD_CTL_INPUT_DIFFERENTIAL) +#define PCM052_VF610_DDR_RESET_PAD_CTL (PAD_CTL_DSE_150ohm | \ + PAD_CTL_PUS_100K_UP | \ + PAD_CTL_INPUT_DIFFERENTIAL) + +enum { + PCM052_VF610_PAD_DDR_RESETB = IOMUX_PAD(0x021c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_RESET_PAD_CTL), + PCM052_VF610_PAD_DDR_A15__DDR_A_15 = IOMUX_PAD(0x0220, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A14__DDR_A_14 = IOMUX_PAD(0x0224, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A13__DDR_A_13 = IOMUX_PAD(0x0228, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A12__DDR_A_12 = IOMUX_PAD(0x022c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A11__DDR_A_11 = IOMUX_PAD(0x0230, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A10__DDR_A_10 = IOMUX_PAD(0x0234, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A9__DDR_A_9 = IOMUX_PAD(0x0238, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A8__DDR_A_8 = IOMUX_PAD(0x023c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A7__DDR_A_7 = IOMUX_PAD(0x0240, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A6__DDR_A_6 = IOMUX_PAD(0x0244, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A5__DDR_A_5 = IOMUX_PAD(0x0248, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A4__DDR_A_4 = IOMUX_PAD(0x024c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A3__DDR_A_3 = IOMUX_PAD(0x0250, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A2__DDR_A_2 = IOMUX_PAD(0x0254, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A1__DDR_A_1 = IOMUX_PAD(0x0258, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A0__DDR_A_0 = IOMUX_PAD(0x025c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_BA2__DDR_BA_2 = IOMUX_PAD(0x0260, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_BA1__DDR_BA_1 = IOMUX_PAD(0x0264, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_BA0__DDR_BA_0 = IOMUX_PAD(0x0268, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_CAS__DDR_CAS_B = IOMUX_PAD(0x026c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_CKE__DDR_CKE_0 = IOMUX_PAD(0x0270, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_CLK__DDR_CLK_0 = IOMUX_PAD(0x0274, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL_1), + PCM052_VF610_PAD_DDR_CS__DDR_CS_B_0 = IOMUX_PAD(0x0278, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D15__DDR_D_15 = IOMUX_PAD(0x027c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D14__DDR_D_14 = IOMUX_PAD(0x0280, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D13__DDR_D_13 = IOMUX_PAD(0x0284, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D12__DDR_D_12 = IOMUX_PAD(0x0288, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D11__DDR_D_11 = IOMUX_PAD(0x028c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D10__DDR_D_10 = IOMUX_PAD(0x0290, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D9__DDR_D_9 = IOMUX_PAD(0x0294, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D8__DDR_D_8 = IOMUX_PAD(0x0298, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D7__DDR_D_7 = IOMUX_PAD(0x029c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D6__DDR_D_6 = IOMUX_PAD(0x02a0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D5__DDR_D_5 = IOMUX_PAD(0x02a4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D4__DDR_D_4 = IOMUX_PAD(0x02a8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D3__DDR_D_3 = IOMUX_PAD(0x02ac, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D2__DDR_D_2 = IOMUX_PAD(0x02b0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D1__DDR_D_1 = IOMUX_PAD(0x02b4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D0__DDR_D_0 = IOMUX_PAD(0x02b8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DQM1__DDR_DQM_1 = IOMUX_PAD(0x02bc, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DQM0__DDR_DQM_0 = IOMUX_PAD(0x02c0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DQS1__DDR_DQS_1 = IOMUX_PAD(0x02c4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL_1), + PCM052_VF610_PAD_DDR_DQS0__DDR_DQS_0 = IOMUX_PAD(0x02c8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL_1), + PCM052_VF610_PAD_DDR_RAS__DDR_RAS_B = IOMUX_PAD(0x02cc, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_WE__DDR_WE_B = IOMUX_PAD(0x02d0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_ODT1__DDR_ODT_0 = IOMUX_PAD(0x02d4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_ODT0__DDR_ODT_1 = IOMUX_PAD(0x02d8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 = IOMUX_PAD(0x02dc, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DDRBYTE0__DDR_DDRBYTE0 = IOMUX_PAD(0x02e0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), +}; + +static struct ddrmc_cr_setting pcm052_cr_settings[] = { + /* not in the datasheets, but in the original code */ + { 0x00002000, 105 }, + { 0x00000020, 110 }, + /* AXI */ + { DDRMC_CR117_AXI0_W_PRI(1) | DDRMC_CR117_AXI0_R_PRI(1), 117 }, + { DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 }, + { DDRMC_CR120_AXI0_PRI1_RPRI(2) | + DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 }, + { DDRMC_CR121_AXI0_PRI3_RPRI(2) | + DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 }, + { DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) | + DDRMC_CR122_AXI0_PRIRLX(100), 122 }, + { DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) | + DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 }, + { DDRMC_CR124_AXI1_PRIRLX(100), 124 }, + { DDRMC_CR126_PHY_RDLAT(11), 126 }, + { DDRMC_CR132_WRLAT_ADJ(5) | DDRMC_CR132_RDLAT_ADJ(6), 132 }, + { DDRMC_CR137_PHYCTL_DL(2), 137 }, + { DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) | + DDRMC_CR139_PHY_WRLV_DLL(3) | + DDRMC_CR139_PHY_WRLV_EN(3), 139 }, + { DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | + DDRMC_CR154_PAD_ZQ_MODE(1) | + DDRMC_CR154_DDR_SEL_PAD_CONTR(3) | + DDRMC_CR154_PAD_ZQ_HW_FOR(0), 154 }, + { DDRMC_CR155_PAD_ODT_BYTE1(5) | DDRMC_CR155_PAD_ODT_BYTE0(5), 155 }, + { DDRMC_CR158_TWR(6), 158 }, + { DDRMC_CR161_ODT_EN(0) | DDRMC_CR161_TODTH_RD(0) | + DDRMC_CR161_TODTH_WR(6), 161 }, + /* end marker */ + { 0, -1 } +}; + +/* PHY settings -- most of them differ from default in imx-regs.h */ + +#define PCM052_DDRMC_PHY_DQ_TIMING 0x00002213 +#define PCM052_DDRMC_PHY_CTRL 0x00290000 +#define PCM052_DDRMC_PHY_SLAVE_CTRL 0x00002c00 +#define PCM052_DDRMC_PHY_PROC_PAD_ODT 0x00010020 + +static struct ddrmc_phy_setting pcm052_phy_settings[] = { + { PCM052_DDRMC_PHY_DQ_TIMING, 0 }, + { PCM052_DDRMC_PHY_DQ_TIMING, 16 }, + { PCM052_DDRMC_PHY_DQ_TIMING, 32 }, + { PCM052_DDRMC_PHY_DQ_TIMING, 48 }, + { DDRMC_PHY_DQS_TIMING, 1 }, + { DDRMC_PHY_DQS_TIMING, 17 }, + { DDRMC_PHY_DQS_TIMING, 33 }, + { DDRMC_PHY_DQS_TIMING, 49 }, + { PCM052_DDRMC_PHY_CTRL, 2 }, + { PCM052_DDRMC_PHY_CTRL, 18 }, + { PCM052_DDRMC_PHY_CTRL, 34 }, + { DDRMC_PHY_MASTER_CTRL, 3 }, + { DDRMC_PHY_MASTER_CTRL, 19 }, + { DDRMC_PHY_MASTER_CTRL, 35 }, + { PCM052_DDRMC_PHY_SLAVE_CTRL, 4 }, + { PCM052_DDRMC_PHY_SLAVE_CTRL, 20 }, + { PCM052_DDRMC_PHY_SLAVE_CTRL, 36 }, + { DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE, 50 }, + { PCM052_DDRMC_PHY_PROC_PAD_ODT, 52 }, + + /* end marker */ + { 0, -1 } +}; + +int dram_init(void) +{ + static const struct ddr3_jedec_timings pcm052_ddr_timings = { + .tinit = 5, + .trst_pwron = 80000, + .cke_inactive = 200000, + .wrlat = 5, + .caslat_lin = 12, + .trc = 6, + .trrd = 4, + .tccd = 4, + .tbst_int_interval = 4, + .tfaw = 18, + .trp = 6, + .twtr = 4, + .tras_min = 15, + .tmrd = 4, + .trtp = 4, + .tras_max = 14040, + .tmod = 12, + .tckesr = 4, + .tcke = 3, + .trcd_int = 6, + .tras_lockout = 1, + .tdal = 10, + .bstlen = 3, + .tdll = 512, + .trp_ab = 6, + .tref = 1542, + .trfc = 64, + .tref_int = 5, + .tpdex = 3, + .txpdll = 10, + .txsnr = 68, + .txsr = 506, + .cksrx = 5, + .cksre = 5, + .freq_chg_en = 1, + .zqcl = 256, + .zqinit = 512, + .zqcs = 64, + .ref_per_zq = 64, + .zqcs_rotate = 1, + .aprebit = 10, + .cmd_age_cnt = 255, + .age_cnt = 255, + .q_fullness = 0, + .odt_rd_mapcs0 = 1, + .odt_wr_mapcs0 = 1, + .wlmrd = 40, + .wldqsen = 25, + }; + + static const iomux_v3_cfg_t pcm052_pads[] = { + PCM052_VF610_PAD_DDR_A15__DDR_A_15, + PCM052_VF610_PAD_DDR_A14__DDR_A_14, + PCM052_VF610_PAD_DDR_A13__DDR_A_13, + PCM052_VF610_PAD_DDR_A12__DDR_A_12, + PCM052_VF610_PAD_DDR_A11__DDR_A_11, + PCM052_VF610_PAD_DDR_A10__DDR_A_10, + PCM052_VF610_PAD_DDR_A9__DDR_A_9, + PCM052_VF610_PAD_DDR_A8__DDR_A_8, + PCM052_VF610_PAD_DDR_A7__DDR_A_7, + PCM052_VF610_PAD_DDR_A6__DDR_A_6, + PCM052_VF610_PAD_DDR_A5__DDR_A_5, + PCM052_VF610_PAD_DDR_A4__DDR_A_4, + PCM052_VF610_PAD_DDR_A3__DDR_A_3, + PCM052_VF610_PAD_DDR_A2__DDR_A_2, + PCM052_VF610_PAD_DDR_A1__DDR_A_1, + PCM052_VF610_PAD_DDR_A0__DDR_A_0, + PCM052_VF610_PAD_DDR_BA2__DDR_BA_2, + PCM052_VF610_PAD_DDR_BA1__DDR_BA_1, + PCM052_VF610_PAD_DDR_BA0__DDR_BA_0, + PCM052_VF610_PAD_DDR_CAS__DDR_CAS_B, + PCM052_VF610_PAD_DDR_CKE__DDR_CKE_0, + PCM052_VF610_PAD_DDR_CLK__DDR_CLK_0, + PCM052_VF610_PAD_DDR_CS__DDR_CS_B_0, + PCM052_VF610_PAD_DDR_D15__DDR_D_15, + PCM052_VF610_PAD_DDR_D14__DDR_D_14, + PCM052_VF610_PAD_DDR_D13__DDR_D_13, + PCM052_VF610_PAD_DDR_D12__DDR_D_12, + PCM052_VF610_PAD_DDR_D11__DDR_D_11, + PCM052_VF610_PAD_DDR_D10__DDR_D_10, + PCM052_VF610_PAD_DDR_D9__DDR_D_9, + PCM052_VF610_PAD_DDR_D8__DDR_D_8, + PCM052_VF610_PAD_DDR_D7__DDR_D_7, + PCM052_VF610_PAD_DDR_D6__DDR_D_6, + PCM052_VF610_PAD_DDR_D5__DDR_D_5, + PCM052_VF610_PAD_DDR_D4__DDR_D_4, + PCM052_VF610_PAD_DDR_D3__DDR_D_3, + PCM052_VF610_PAD_DDR_D2__DDR_D_2, + PCM052_VF610_PAD_DDR_D1__DDR_D_1, + PCM052_VF610_PAD_DDR_D0__DDR_D_0, + PCM052_VF610_PAD_DDR_DQM1__DDR_DQM_1, + PCM052_VF610_PAD_DDR_DQM0__DDR_DQM_0, + PCM052_VF610_PAD_DDR_DQS1__DDR_DQS_1, + PCM052_VF610_PAD_DDR_DQS0__DDR_DQS_0, + PCM052_VF610_PAD_DDR_RAS__DDR_RAS_B, + PCM052_VF610_PAD_DDR_WE__DDR_WE_B, + PCM052_VF610_PAD_DDR_ODT1__DDR_ODT_0, + PCM052_VF610_PAD_DDR_ODT0__DDR_ODT_1, + PCM052_VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1, + PCM052_VF610_PAD_DDR_DDRBYTE0__DDR_DDRBYTE0, + PCM052_VF610_PAD_DDR_RESETB, + }; + + imx_iomux_v3_setup_multiple_pads(pcm052_pads, ARRAY_SIZE(pcm052_pads)); + + ddrmc_ctrl_init_ddr3(&pcm052_ddr_timings, pcm052_cr_settings, + pcm052_phy_settings, 1, 2); + + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +static void setup_iomux_uart(void) +{ + static const iomux_v3_cfg_t uart1_pads[] = { + NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, VF610_UART_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, VF610_UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \ + PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE) + +static void setup_iomux_enet(void) +{ + static const iomux_v3_cfg_t enet0_pads[] = { + NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKIN, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC1__RMII0_MDIO, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC0__RMII0_MDC, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC2__RMII0_CRS_DV, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC3__RMII0_RD1, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC4__RMII0_RD0, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC5__RMII0_RXER, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC6__RMII0_TD1, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC7__RMII0_TD0, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC8__RMII0_TXEN, ENET_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads)); +} + +/* + * I2C2 is the only I2C used, on pads PTA22/PTA23. + */ + +static void setup_iomux_i2c(void) +{ + static const iomux_v3_cfg_t i2c_pads[] = { + VF610_PAD_PTA22__I2C2_SCL, + VF610_PAD_PTA23__I2C2_SDA, + }; + + imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads)); +} + +#ifdef CONFIG_NAND_VF610_NFC +static void setup_iomux_nfc(void) +{ + static const iomux_v3_cfg_t nfc_pads[] = { + VF610_PAD_PTD31__NF_IO15, + VF610_PAD_PTD30__NF_IO14, + VF610_PAD_PTD29__NF_IO13, + VF610_PAD_PTD28__NF_IO12, + VF610_PAD_PTD27__NF_IO11, + VF610_PAD_PTD26__NF_IO10, + VF610_PAD_PTD25__NF_IO9, + VF610_PAD_PTD24__NF_IO8, + VF610_PAD_PTD23__NF_IO7, + VF610_PAD_PTD22__NF_IO6, + VF610_PAD_PTD21__NF_IO5, + VF610_PAD_PTD20__NF_IO4, + VF610_PAD_PTD19__NF_IO3, + VF610_PAD_PTD18__NF_IO2, + VF610_PAD_PTD17__NF_IO1, + VF610_PAD_PTD16__NF_IO0, + VF610_PAD_PTB24__NF_WE_B, + VF610_PAD_PTB25__NF_CE0_B, + VF610_PAD_PTB27__NF_RE_B, + VF610_PAD_PTC26__NF_RB_B, + VF610_PAD_PTC27__NF_ALE, + VF610_PAD_PTC28__NF_CLE + }; + + imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads)); +} +#endif + +static void setup_iomux_qspi(void) +{ + static const iomux_v3_cfg_t qspi0_pads[] = { + VF610_PAD_PTD0__QSPI0_A_QSCK, + VF610_PAD_PTD1__QSPI0_A_CS0, + VF610_PAD_PTD2__QSPI0_A_DATA3, + VF610_PAD_PTD3__QSPI0_A_DATA2, + VF610_PAD_PTD4__QSPI0_A_DATA1, + VF610_PAD_PTD5__QSPI0_A_DATA0, + VF610_PAD_PTD7__QSPI0_B_QSCK, + VF610_PAD_PTD8__QSPI0_B_CS0, + VF610_PAD_PTD9__QSPI0_B_DATA3, + VF610_PAD_PTD10__QSPI0_B_DATA2, + VF610_PAD_PTD11__QSPI0_B_DATA1, + VF610_PAD_PTD12__QSPI0_B_DATA0, + }; + + imx_iomux_v3_setup_multiple_pads(qspi0_pads, ARRAY_SIZE(qspi0_pads)); +} + +#define ESDHC_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \ + PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE) + +struct fsl_esdhc_cfg esdhc_cfg[1] = { + {ESDHC1_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + /* eSDHC1 is always present */ + return 1; +} + +int board_mmc_init(bd_t *bis) +{ + static const iomux_v3_cfg_t esdhc1_pads[] = { + NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL), + }; + + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + + imx_iomux_v3_setup_multiple_pads( + esdhc1_pads, ARRAY_SIZE(esdhc1_pads)); + + return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); +} + +static void clock_init(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR; + + clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK, + CCM_CCGR0_UART1_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK, + CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK, + CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK | + CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK | + CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK | + CCM_CCGR2_QSPI0_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK, + CCM_CCGR3_ANADIG_CTRL_MASK | CCM_CCGR3_SCSC_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK, + CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK | + CCM_CCGR4_GPC_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK, + CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK, + CCM_CCGR7_SDHC1_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK, + CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK, + CCM_CCGR10_NFC_CTRL_MASK | CCM_CCGR10_I2C2_CTRL_MASK); + + clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN, + ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT); + clrsetbits_le32(&anadig->pll1_ctrl, ANADIG_PLL1_CTRL_POWERDOWN, + ANADIG_PLL1_CTRL_ENABLE | ANADIG_PLL1_CTRL_DIV_SELECT); + + clrsetbits_le32(&ccm->ccr, CCM_CCR_OSCNT_MASK, + CCM_CCR_FIRC_EN | CCM_CCR_OSCNT(5)); + clrsetbits_le32(&ccm->ccsr, CCM_REG_CTRL_MASK, + CCM_CCSR_PLL1_PFD_CLK_SEL(3) | CCM_CCSR_PLL2_PFD4_EN | + CCM_CCSR_PLL2_PFD3_EN | CCM_CCSR_PLL2_PFD2_EN | + CCM_CCSR_PLL2_PFD1_EN | CCM_CCSR_PLL1_PFD4_EN | + CCM_CCSR_PLL1_PFD3_EN | CCM_CCSR_PLL1_PFD2_EN | + CCM_CCSR_PLL1_PFD1_EN | CCM_CCSR_DDRC_CLK_SEL(1) | + CCM_CCSR_FAST_CLK_SEL(1) | CCM_CCSR_SYS_CLK_SEL(4)); + clrsetbits_le32(&ccm->cacrr, CCM_REG_CTRL_MASK, + CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) | + CCM_CACRR_ARM_CLK_DIV(0)); + clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK, + CCM_CSCMR1_ESDHC1_CLK_SEL(3) | + CCM_CSCMR1_QSPI0_CLK_SEL(3) | + CCM_CSCMR1_NFC_CLK_SEL(0)); + clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK, + CCM_CSCDR1_RMII_CLK_EN); + clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK, + CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) | + CCM_CSCDR2_NFC_EN); + clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK, + CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) | + CCM_CSCDR3_QSPI0_X2_DIV(1) | + CCM_CSCDR3_QSPI0_X4_DIV(3) | + CCM_CSCDR3_NFC_PRE_DIV(5)); + clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK, + CCM_CSCMR2_RMII_CLK_SEL(0)); +} + +static void mscm_init(void) +{ + struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_IR_BASE_ADDR; + int i; + + for (i = 0; i < MSCM_IRSPRC_NUM; i++) + writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]); +} + +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +int board_early_init_f(void) +{ + clock_init(); + mscm_init(); + setup_iomux_uart(); + setup_iomux_enet(); + setup_iomux_i2c(); + setup_iomux_qspi(); + setup_iomux_nfc(); + + return 0; +} + +int board_init(void) +{ + struct scsc_reg *scsc = (struct scsc_reg *)SCSC_BASE_ADDR; + + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + /* + * Enable external 32K Oscillator + * + * The internal clock experiences significant drift + * so we must use the external oscillator in order + * to maintain correct time in the hwclock + */ + setbits_le32(&scsc->sosc_ctr, SCSC_SOSC_CTR_SOSC_EN); + + return 0; +} + +int checkboard(void) +{ + puts("Board: PCM-052\n"); + + return 0; +} diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig new file mode 100644 index 0000000000..e8dc402878 --- /dev/null +++ b/configs/pcm052_defconfig @@ -0,0 +1,6 @@ +CONFIG_ARM=y +CONFIG_TARGET_PCM052=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND" +CONFIG_NAND_VF610_NFC=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y +CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES=y diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h new file mode 100644 index 0000000000..903f94c17e --- /dev/null +++ b/include/configs/pcm052.h @@ -0,0 +1,231 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Configuration settings for the phytec PCM-052 SoM. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include + +#define CONFIG_VF610 + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_THUMB_BUILD + +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* Enable passing of ATAGs */ +#define CONFIG_CMDLINE_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_FSL_LPUART +#define LPUART_BASE UART1_BASE + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_UART_PORT (1) +#define CONFIG_BAUDRATE 115200 + +#undef CONFIG_CMD_IMLS + +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_SYS_NAND_ONFI_DETECTION + +#ifdef CONFIG_CMD_NAND +#define CONFIG_USE_ARCH_MEMCPY +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR + +#define CONFIG_JFFS2_NAND + +/* UBI */ +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_LZO + +/* Dynamic MTD partition support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define MTDIDS_DEFAULT "nand0=NAND,nor0=qspi0-a,nor1=qspi0-b" +#define MTDPARTS_DEFAULT "mtdparts=NAND:256k(spare)"\ + ",384k(bootloader)"\ + ",128k(env1)"\ + ",128k(env2)"\ + ",3840k(kernel)"\ + ",-(rootfs)"\ + ",qspi0-a:-(jffs2),qspio0-b:-(jffs2)" +#endif + +#define CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + +/*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/ +#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL + +/* QSPI Configs*/ +#define CONFIG_FSL_QSPI + +#ifdef CONFIG_FSL_QSPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 +#define CONFIG_SYS_FSL_QSPI_LE +#endif + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC_I2C3 +#define CONFIG_SYS_I2C_MXC + +/* RTC (actually an RV-4162 but M41T62-compatible) */ +#define CONFIG_CMD_DATE +#define CONFIG_RTC_M41T62 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_RTC_BUS_NUM 2 + +/* EEPROM (24FC256) */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_BUS 2 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x82000000 + +/* We boot from the gfxRAM area of the OCRAM. */ +#define CONFIG_SYS_TEXT_BASE 0x3f408000 +#define CONFIG_BOARD_SIZE_LIMIT 524288 + +#define CONFIG_BOOTCOMMAND "run bootcmd_sd" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootfile=uImage\0" \ + "bootargs_base=setenv bootargs rw mem=256M " \ + "console=ttymxc1,115200n8\0" \ + "bootargs_sd=setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk0p2 rootwait\0" \ + "bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \ + "nfsroot=${serverip}:${nfs_root},v3,tcp\0" \ + "bootargs_nand=setenv bootargs ${bootargs} " \ + "root=/dev/mtdblock2 rootfstype=jffs2\0" \ + "bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; mmc rescan; " \ + "fatload mmc 0:1 ${loadaddr} ${bootfile}; bootm ${loadaddr}\0" \ + "bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \ + "tftpboot ${loadaddr} ${tftploc}${bootfile}; bootm\0" \ + "bootcmd_nand='run bootargs_base bootargs_nand bootargs_mtd; " \ + "nand read ${loadaddr} 0x000E0000 0x3C0000; " \ + "bootm ${loadaddr}\0" \ + "tftploc=/path/to/tftp/directory/\0" \ + "nfs_root=/path/to/nfs/root\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "update_kernel_from_sd=mw.b $(loadaddr) 0xff 0x3C0000; " \ + "mmc rescan; fatload mmc 0:2 ${loadaddr} ${bootfile}; " \ + "nand erase 0xE0000 0x3C0000; " \ + "nand write.i ${loadaddr} 0xE0000 0x3C0000\0" \ + "update_rootfs_from_tftp=mw.b ${loadaddr} 0xff 0x8F20000; " \ + "tftp ${loadaddr} ${tftp}${filesys}; " \ + "nand erase 0x4A0000 0x8F20000; " \ + "nand write.i ${loadaddr} 0x4A0000 0x8F20000\0" \ + "filesys=rootfs.jffs2\0" + +/* miscellaneous commands */ +#define CONFIG_CMD_ELF + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80010000 +#define CONFIG_SYS_MEMTEST_END 0x87C00000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* + * Stack sizes + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* Physical memory map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM (0x80000000) +#define PHYS_SDRAM_SIZE (256 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#ifdef CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE (8 * 1024) + +#define CONFIG_ENV_OFFSET (12 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_OFFSET 0x80000 +#define CONFIG_ENV_SIZE_REDUND (8 * 1024) +#define CONFIG_ENV_OFFSET_REDUND 0xA0000 +#endif + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#endif -- 2.39.5