From 865acad78f61c4bf1c8412aa511eb404cb6a3d4e Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 9 Feb 2021 21:42:54 -0500 Subject: [PATCH] ppc: Remove MPC8641HPCN board This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain Signed-off-by: Tom Rini Reviewed-by: Priyanka Jain --- arch/powerpc/cpu/mpc86xx/Kconfig | 7 - board/freescale/common/pixis.h | 25 - board/freescale/mpc8641hpcn/Kconfig | 12 - board/freescale/mpc8641hpcn/MAINTAINERS | 7 - board/freescale/mpc8641hpcn/Makefile | 8 - board/freescale/mpc8641hpcn/README | 186 ------- board/freescale/mpc8641hpcn/ddr.c | 107 ---- board/freescale/mpc8641hpcn/law.c | 43 -- board/freescale/mpc8641hpcn/mpc8641hpcn.c | 247 --------- configs/MPC8641HPCN_36BIT_defconfig | 48 -- configs/MPC8641HPCN_defconfig | 48 -- include/configs/MPC8641HPCN.h | 632 ---------------------- 12 files changed, 1370 deletions(-) delete mode 100644 board/freescale/mpc8641hpcn/Kconfig delete mode 100644 board/freescale/mpc8641hpcn/MAINTAINERS delete mode 100644 board/freescale/mpc8641hpcn/Makefile delete mode 100644 board/freescale/mpc8641hpcn/README delete mode 100644 board/freescale/mpc8641hpcn/ddr.c delete mode 100644 board/freescale/mpc8641hpcn/law.c delete mode 100644 board/freescale/mpc8641hpcn/mpc8641hpcn.c delete mode 100644 configs/MPC8641HPCN_36BIT_defconfig delete mode 100644 configs/MPC8641HPCN_defconfig delete mode 100644 include/configs/MPC8641HPCN.h diff --git a/arch/powerpc/cpu/mpc86xx/Kconfig b/arch/powerpc/cpu/mpc86xx/Kconfig index 294485794b..7de42b5f25 100644 --- a/arch/powerpc/cpu/mpc86xx/Kconfig +++ b/arch/powerpc/cpu/mpc86xx/Kconfig @@ -13,12 +13,6 @@ config TARGET_SBC8641D select ARCH_MPC8641 select BOARD_EARLY_INIT_F -config TARGET_MPC8641HPCN - bool "Support MPC8641HPCN" - select ARCH_MPC8641 - select FSL_DDR_INTERACTIVE - imply SCSI - config TARGET_XPEDITE517X bool "Support xpedite517x" select ARCH_MPC8641 @@ -57,7 +51,6 @@ config SYS_FSL_NUM_LAWS Number of local access windows. This is fixed per SoC. If not sure, do not change. -source "board/freescale/mpc8641hpcn/Kconfig" source "board/sbc8641d/Kconfig" source "board/xes/xpedite517x/Kconfig" diff --git a/board/freescale/common/pixis.h b/board/freescale/common/pixis.h index 474ae56d44..f19e85cb1c 100644 --- a/board/freescale/common/pixis.h +++ b/board/freescale/common/pixis.h @@ -44,31 +44,6 @@ typedef struct pixis { u8 vtempmax[2]; u8 res2[4]; } __attribute__ ((packed)) pixis_t; - -#elif defined(CONFIG_TARGET_MPC8641HPCN) -typedef struct pixis { - u8 id; - u8 ver; - u8 pver; - u8 csr; - u8 rst; - u8 pwr; - u8 aux; - u8 spd; - u8 res[8]; - u8 vctl; - u8 vstat; - u8 vcfgen0; - u8 vcfgen1; - u8 vcore0; - u8 res1; - u8 vboot; - u8 vspeed[2]; - u8 vclkh; - u8 vclkl; - u8 watch; - u8 res3[36]; -} __attribute__ ((packed)) pixis_t; #else #error Need to define pixis_t for this board #endif diff --git a/board/freescale/mpc8641hpcn/Kconfig b/board/freescale/mpc8641hpcn/Kconfig deleted file mode 100644 index ae45d63337..0000000000 --- a/board/freescale/mpc8641hpcn/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MPC8641HPCN - -config SYS_BOARD - default "mpc8641hpcn" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8641HPCN" - -endif diff --git a/board/freescale/mpc8641hpcn/MAINTAINERS b/board/freescale/mpc8641hpcn/MAINTAINERS deleted file mode 100644 index c957218767..0000000000 --- a/board/freescale/mpc8641hpcn/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -MPC8641HPCN BOARD -M: Priyanka Jain -S: Maintained -F: board/freescale/mpc8641hpcn/ -F: include/configs/MPC8641HPCN.h -F: configs/MPC8641HPCN_defconfig -F: configs/MPC8641HPCN_36BIT_defconfig diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile deleted file mode 100644 index 86b87193dd..0000000000 --- a/board/freescale/mpc8641hpcn/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y += mpc8641hpcn.o -obj-y += law.o -obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/freescale/mpc8641hpcn/README b/board/freescale/mpc8641hpcn/README deleted file mode 100644 index 77909a8383..0000000000 --- a/board/freescale/mpc8641hpcn/README +++ /dev/null @@ -1,186 +0,0 @@ -Freescale MPC8641HPCN board -=========================== - -Created 05/24/2006 Haiying Wang -------------------------------- - -1. Building U-Boot ------------------- -The 86xx HPCN code base is known to compile using: - Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3 - - $ make MPC8641HPCN_config - Configuring for MPC8641HPCN board... - - $ make - - -2. Switch and Jumper Setting ----------------------------- -Jumpers: - J14 Pins 1-2 (near plcc32 socket) - -Switches: - SW1(1-5) = 01100 CONFIG_SYS_COREPLL = 01000 :: CORE = 2:1 - 01100 :: CORE = 2.5:1 - 10000 :: CORE = 3:1 - 11100 :: CORE = 3.5:1 - 10100 :: CORE = 4:1 - 01110 :: CORE = 4.5:1 - SW1(6-8) = 001 CONFIG_SYS_SYSCLK = 000 :: SYSCLK = 33MHz - 001 :: SYSCLK = 40MHz - - SW2(1-4) = 1100 CONFIG_SYS_CCBPLL = 0010 :: 2X - 0100 :: 4X - 0110 :: 6X - 1000 :: 8X - 1010 :: 10X - 1100 :: 12X - 1110 :: 14X - 0000 :: 16X - SW2(5-8) = 1110 CONFIG_SYS_BOOTLOC = 1110 :: boot 16-bit localbus - - SW3(1-7) = 0011000 CONFIG_SYS_VID = 0011000 :: VCORE = 1.2V - 0100000 :: VCORE = 1.11V - SW3(8) = 0 VCC_PLAT = 0 :: VCC_PLAT = 1.2V - 1 :: VCC_PLAT = 1.0V - - SW4(1-2) = 11 CONFIG_SYS_HOSTMODE = 11 :: both prots host/root - SW4(3-4) = 11 CONFIG_SYS_BOOTSEQ = 11 :: no boot seq - SW4(5-8) = 0011 CONFIG_SYS_IOPORT = 0011 :: both PEX - - SW5(1) = 1 CONFIG_SYS_FLASHMAP = 1 :: boot from flash - 0 :: boot from PromJet - SW5(2) = 1 CONFIG_SYS_FLASHBANK = 1 :: swap upper/lower - halves (virtual banks) - 0 :: normal - SW5(3) = 0 CONFIG_SYS_FLASHWP = 0 :: not protected - SW5(4) = 0 CONFIG_SYS_PORTDIV = 1 :: 2:1 for PD4 - 1:1 for PD6 - SW5(5-6) = 11 CONFIG_SYS_PIXISOPT = 11 :: s/w determined - SW5(7-8) = 11 CONFIG_SYS_LADOPT = 11 :: s/w determined - - SW6(1) = 1 CONFIG_SYS_CPUBOOT = 1 :: no boot holdoff - SW6(2) = 1 CONFIG_SYS_BOOTADDR = 1 :: no traslation - SW6(3-5) = 000 CONFIG_SYS_REFCLKSEL = 000 :: 100MHZ - SW6(6) = 1 CONFIG_SYS_SERROM_ADDR= 1 :: - SW6(7) = 1 CONFIG_SYS_MEMDEBUG = 1 :: - SW6(8) = 1 CONFIG_SYS_DDRDEBUG = 1 :: - - SW8(1) = 1 ACZ_SYNC = 1 :: 48MHz on TP49 - SW8(2) = 1 ACB_SYNC = 1 :: THRMTRIP disabled - SW8(3) = 1 ACZ_SDOUT = 1 :: p4 mode - SW8(4) = 1 ACB_SDOUT = 1 :: PATA freq. = 133MHz - SW8(5) = 0 SUSLED = 0 :: SouthBridge Mode - SW8(6) = 0 SPREAD = 0 :: REFCLK SSCG Disabled - SW8(7) = 1 ACPWR = 1 :: non-battery - SW8(8) = 0 CONFIG_SYS_IDWP = 0 :: write enable - - -3. Flash U-Boot ---------------- -The flash range 0xEF800000 to 0xEFFFFFFF can be divided into 2 halves. -It is possible to use either half to boot using U-Boot. Switch 5 bit 2 -is used for this purpose. - -0xEF800000 to 0xEFBFFFFF - 4MB -0xEFC00000 to 0xEFFFFFFF - 4MB -When this bit is 0, U-Boot is at 0xEFF00000. -When this bit is 1, U-Boot is at 0xEFB00000. - -Use the above mentioned flash commands to program the other half, and -use switch 5, bit 2 to alternate between the halves. Note: The booting -version of U-Boot will always be at 0xEFF00000. - -To Flash U-Boot into the booting bank (0xEFC00000 - 0xEFFFFFFF): - - tftp 1000000 u-boot.bin - protect off all - erase eff00000 +$filesize - cp.b 1000000 eff00000 $filesize - -or use tftpflash command: - run tftpflash - -To Flash U-Boot into the alternative bank (0xEF800000 - 0xEFBFFFFF): - - tftp 1000000 u-boot.bin - erase efb00000 +$filesize - cp.b 1000000 efb00000 $filesize - - -4. Memory Map -------------- -NOTE: RIO and PCI are mutually exclusive, so they share an address - -For 32-bit U-Boot, devices are mapped so that the virtual address == -the physical address, and the map looks liks this: - - Memory Range Device Size - ------------ ------ ---- - 0x0000_0000 0x7fff_ffff DDR 2G - 0x8000_0000 0x9fff_ffff RIO MEM 512M - 0x8000_0000 0x9fff_ffff PCI1/PEX1 MEM 512M - 0xa000_0000 0xbfff_ffff PCI2/PEX2 MEM 512M - 0xffe0_0000 0xffef_ffff CCSR 1M - 0xffdf_0000 0xffdf_7fff PIXIS 8K - 0xffdf_8000 0xffdf_ffff CF 8K - 0xf840_0000 0xf840_3fff Stack space 32K - 0xffc0_0000 0xffc0_ffff PCI1/PEX1 IO 64K - 0xffc1_0000 0xffc1_ffff PCI2/PEX2 IO 64K - 0xef80_0000 0xefff_ffff Flash 8M - -For 36-bit-enabled U-Boot, the virtual map is the same as for 32-bit. -However, the physical map is altered to reside in 36-bit space, as follows. -Addresses are no longer mapped with VA == PA. All accesses from -software use the VA; the PA is only used for setting up windows -and mappings. Note that with the exception of PCI MEM and RIO, the low - 32 bits are the same as the VA above; only the top 4 bits vary: - - Memory Range Device Size - ------------ ------ ---- - 0x0_0000_0000 0x0_7fff_ffff DDR 2G - 0xc_0000_0000 0xc_1fff_ffff RIO MEM 512M - 0xc_0000_0000 0xc_1fff_ffff PCI1/PEX1 MEM 512M - 0xc_2000_0000 0xc_3fff_ffff PCI2/PEX2 MEM 512M - 0xf_ffe0_0000 0xf_ffef_ffff CCSR 1M - 0xf_ffdf_0000 0xf_ffdf_7fff PIXIS 8K - 0xf_ffdf_8000 0xf_ffdf_ffff CF 8K - 0x0_f840_0000 0xf_f840_3fff Stack space 32K - 0xf_ffc0_0000 0xf_ffc0_ffff PCI1/PEX1 IO 64K - 0xf_ffc1_0000 0xf_ffc1_ffff PCI2/PEX2 IO 64K - 0xf_ef80_0000 0xf_efff_ffff Flash 8M - -5. pixis_reset command --------------------- -A new command, "pixis_reset", is introduced to reset mpc8641hpcn board -using the FPGA sequencer. When the board restarts, it has the option -of using either the current or alternate flash bank as the boot -image, with or without the watchdog timer enabled, and finally with -or without frequency changes. - -Usage is; - - pixis_reset - pixis_reset altbank - pixis_reset altbank wd - pixis_reset altbank cf - pixis_reset cf - -Examples; - - /* reset to current bank, like "reset" command */ - pixis_reset - - /* reset board but use the to alternate flash bank */ - pixis_reset altbank - - /* reset board, use alternate flash bank with watchdog timer enabled*/ - pixis_reset altbank wd - - /* reset board to alternate bank with frequency changed. - * 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio - */ - pixis-reset altbank cf 40 2.5 10 - -Valid clock choices are in the 8641 Reference Manuals. diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c deleted file mode 100644 index df7e3eceed..0000000000 --- a/board/freescale/mpc8641hpcn/ddr.c +++ /dev/null @@ -1,107 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2008,2011 Freescale Semiconductor, Inc. - */ - -#include - -#include -#include - -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 clk_adjust; - u32 cpo; - u32 write_data_delay; -}; - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - */ -const struct board_specific_parameters dimm0[] = { - /* - * memory controller 0 - * num| hi| clk| cpo|wrdata|2T - * ranks| mhz|adjst| | delay| - */ - {4, 333, 7, 7, 3}, - {4, 549, 7, 9, 3}, - {4, 650, 7, 10, 4}, - {2, 333, 7, 7, 3}, - {2, 549, 7, 9, 3}, - {2, 650, 7, 10, 4}, - {1, 333, 7, 7, 3}, - {1, 549, 7, 9, 3}, - {1, 650, 7, 10, 4}, - {} -}; - -/* - * The two slots have slightly different timing. The center values are good - * for both slots. We use identical speed tables for them. In future use, if - * DIMMs have fewer center values that require two separated tables, copy the - * udimm0 table to udimm1 and make changes to clk_adjust and wrlvl_start. - */ -const struct board_specific_parameters *dimms[] = { - dimm0, - dimm0, -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; - unsigned int i; - ulong ddr_freq; - - if (ctrl_num > 1) { - printf("Wrong parameter for controller number %d", ctrl_num); - return; - } - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (pdimm[i].n_ranks) - break; - } - if (i >= CONFIG_DIMM_SLOTS_PER_CTLR) /* no DIMM */ - return; - - pbsp = dimms[ctrl_num]; - - /* Get clk_adjust, cpo, write_data_delay, according to the board ddr - * freqency and n_banks specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm[i].n_ranks) { - if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->clk_adjust = pbsp->clk_adjust; - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = - pbsp->write_data_delay; - goto found; - } - pbsp_highest = pbsp; - } - pbsp++; - } - - if (pbsp_highest) { - printf("Error: board specific timing not found " - "for data rate %lu MT/s!\n" - "Trying to use the highest speed (%u) parameters\n", - ddr_freq, pbsp_highest->datarate_mhz_high); - popts->clk_adjust = pbsp_highest->clk_adjust; - popts->cpo_override = pbsp_highest->cpo; - popts->write_data_delay = pbsp_highest->write_data_delay; - } else { - panic("DIMM is not supported by this board"); - } - -found: - /* 2T timing enable */ - popts->twot_en = 1; -} diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c deleted file mode 100644 index b73d660883..0000000000 --- a/board/freescale/mpc8641hpcn/law.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008,2010-2011 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include -#include -#include - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) - * 0x8000_0000 0x9fff_ffff PCIE1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCIE2 MEM 512M - * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) - * 0x8000_0000 0x9fff_ffff RapidIO 512M - * endif - * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT) - * 0xffc0_0000 0xffc0_ffff PCIE1 IO 64K - * 0xffc1_0000 0xffc1_ffff PCIE2 IO 64K - * 0xffe0_0000 0xffef_ffff CCSRBAR 1M - * 0xffdf_0000 0xffe0_0000 PIXIS, CF 64K - * 0xef80_0000 0xefff_ffff FLASH (boot bank) 8M - * - * Notes: - * CCSRBAR doesn't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -struct law_entry law_table[] = { -#if !defined(CONFIG_SPD_EEPROM) - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1), -#endif - SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c deleted file mode 100644 index 0f9aea469b..0000000000 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ /dev/null @@ -1,247 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2006, 2007, 2010-2011 Freescale Semiconductor. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -phys_size_t fixed_sdram(void); - -int checkboard(void) -{ - u8 vboot; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - printf ("Board: MPC8641HPCN, Sys ID: 0x%02x, " - "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", - in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), - in_8(pixis_base + PIXIS_PVER)); - - vboot = in_8(pixis_base + PIXIS_VBOOT); - if (vboot & PIXIS_VBOOT_FMAP) - printf ("vBank: %d\n", ((vboot & PIXIS_VBOOT_FBANK) >> 6)); - else - puts ("Promjet\n"); - - return 0; -} - -int dram_init(void) -{ - phys_size_t dram_size = 0; - -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); -#endif - - setup_ddr_bat(dram_size); - - debug(" DDR: "); - gd->ram_size = dram_size; - - return 0; -} - - -#if !defined(CONFIG_SPD_EEPROM) -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -phys_size_t -fixed_sdram(void) -{ -#if !defined(CONFIG_SYS_RAMBOOT) - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - struct ccsr_ddr __iomem *ddr = &immap->im_ddr1; - - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; - ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; - ddr->sdram_ocd_cntl = CONFIG_SYS_DDR_OCD_CTRL; - ddr->sdram_ocd_status = CONFIG_SYS_DDR_OCD_STATUS; - -#if defined (CONFIG_DDR_ECC) - ddr->err_disable = 0x0000008D; - ddr->err_sbe = 0x00ff0000; -#endif - asm("sync;isync"); - - udelay(500); - -#if defined (CONFIG_DDR_ECC) - /* Enable ECC checking */ - ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); -#else - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; -#endif - asm("sync; isync"); - - udelay(500); -#endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - -void pci_init_board(void) -{ - fsl_pcie_init_board(0); - -#ifdef CONFIG_PCIE1 - /* - * Activate ULI1575 legacy chip by performing a fake - * memory access. Needed to make ULI RTC work. - */ - in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT - + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000))); -#endif /* CONFIG_PCIE1 */ -} - - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ - int off; - u64 *tmp; - int addrcells; - - ft_cpu_setup(blob, bd); - - FT_FSL_PCI_SETUP; - - /* - * Warn if it looks like the device tree doesn't match u-boot. - * This is just an estimation, based on the location of CCSR, - * which is defined by the "reg" property in the soc node. - */ - off = fdt_path_offset(blob, "/soc8641"); - addrcells = fdt_address_cells(blob, 0); - tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL); - - if (tmp) { - u64 addr; - - if (addrcells == 1) - addr = *(u32 *)tmp; - else - addr = *tmp; - - if (addr != CONFIG_SYS_CCSRBAR_PHYS) - printf("WARNING: The CCSRBAR address in your .dts " - "does not match the address of the CCSR " - "in u-boot. This means your .dts might " - "be old.\n"); - } - - return 0; -} -#endif - - -/* - * get_board_sys_clk - * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ - */ - -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 i, go_bit, rd_clks; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - go_bit = in_8(pixis_base + PIXIS_VCTL); - go_bit &= 0x01; - - rd_clks = in_8(pixis_base + PIXIS_VCFGEN0); - rd_clks &= 0x1C; - - /* - * Only if both go bit and the SCLK bit in VCFGEN0 are set - * should we be using the AUX register. Remember, we also set the - * GO bit to boot from the alternate bank on the on-board flash - */ - - if (go_bit) { - if (rd_clks == 0x1c) - i = in_8(pixis_base + PIXIS_AUX); - else - i = in_8(pixis_base + PIXIS_SPD); - } else { - i = in_8(pixis_base + PIXIS_SPD); - } - - i &= 0x07; - - switch (i) { - case 0: - val = 33000000; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66000000; - break; - case 4: - val = 83000000; - break; - case 5: - val = 100000000; - break; - case 6: - val = 134000000; - break; - case 7: - val = 166000000; - break; - } - - return val; -} - -int board_eth_init(struct bd_info *bis) -{ - /* Initialize TSECs */ - cpu_eth_init(bis); - return pci_eth_init(bis); -} - -void board_reset(void) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - out_8(pixis_base + PIXIS_RST, 0); - - while (1) - ; -} diff --git a/configs/MPC8641HPCN_36BIT_defconfig b/configs/MPC8641HPCN_36BIT_defconfig deleted file mode 100644 index 2c093b9bad..0000000000 --- a/configs/MPC8641HPCN_36BIT_defconfig +++ /dev/null @@ -1,48 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xeff00000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_MPC86xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_MPC8641HPCN=y -CONFIG_PHYS_64BIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -# CONFIG_CONSOLE_MUX is not set -CONFIG_HUSH_PARSER=y -# CONFIG_AUTO_COMPLETE is not set -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_ADDR=0xEFF80000 -CONFIG_SCSI_AHCI=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_USB=y -CONFIG_USB_KEYBOARD=y -CONFIG_VIDEO=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=8 -CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8641HPCN_defconfig b/configs/MPC8641HPCN_defconfig deleted file mode 100644 index a37fad0319..0000000000 --- a/configs/MPC8641HPCN_defconfig +++ /dev/null @@ -1,48 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xeff00000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_MPC86xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_MPC8641HPCN=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -# CONFIG_CONSOLE_MUX is not set -CONFIG_HUSH_PARSER=y -# CONFIG_AUTO_COMPLETE is not set -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_PING=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_ADDR=0xEFF80000 -CONFIG_SCSI_AHCI=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_USB=y -CONFIG_USB_KEYBOARD=y -CONFIG_VIDEO=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=8 -CONFIG_OF_LIBFDT=y diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h deleted file mode 100644 index e6e1e7943c..0000000000 --- a/include/configs/MPC8641HPCN.h +++ /dev/null @@ -1,632 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2006, 2010-2011 Freescale Semiconductor. - * - * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) - */ - -/* - * MPC8641HPCN board configuration file - * - * Make sure you change the MAC address and other network params first, - * search for CONFIG_SERVERIP, etc. in this file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* High Level Configuration Options */ -#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ - -/* - * default CCSRBAR is at 0xff700000 - * assume U-Boot is less than 0.5MB - */ - -#ifdef RUN_DIAG -#define CONFIG_SYS_DIAG_ADDR CONFIG_SYS_FLASH_BASE -#endif - -/* - * virtual address to be used for temporary mappings. There - * should be 128k free at this VA. - */ -#define CONFIG_SYS_SCRATCH_VA 0xe0000000 - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ - -#define CONFIG_PCIE1 1 /* PCIE controller 1 (ULI bridge) */ -#define CONFIG_PCIE2 1 /* PCIE controller 2 (slot) */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ - -#define CONFIG_ALTIVEC 1 - -/* - * L2CR setup -- make sure this is right for your board! - */ -#define CONFIG_SYS_L2 -#define L2_INIT 0 -#define L2_ENABLE (L2CR_L2E) - -#ifndef CONFIG_SYS_CLK_FREQ -#ifndef __ASSEMBLY__ -extern unsigned long get_board_sys_clk(unsigned long dummy); -#endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) -#endif - -/* - * With the exception of PCI Memory and Rapid IO, most devices will simply - * add CONFIG_SYS_PHYS_ADDR_HIGH to the front of the 32-bit VA to get the PA - * when 36-bit is enabled. When 36-bit is not enabled, these bits are 0. - */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0000000f -#else -#define CONFIG_SYS_PHYS_ADDR_HIGH 0x00000000 -#endif - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ - -/* Physical addresses */ -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH CONFIG_SYS_PHYS_ADDR_HIGH -#define CONFIG_SYS_CCSRBAR_PHYS \ - PAIRED_PHYS_TO_PHYS(CONFIG_SYS_CCSRBAR_PHYS_LOW, \ - CONFIG_SYS_CCSRBAR_PHYS_HIGH) - -#define CONFIG_HWCONFIG /* use hwconfig to control memory interleaving */ - -/* - * DDR Setup - */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_MAX_DDR_BAT_SIZE 0x80000000 /* BAT mapping size */ -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -/* - * I2C addresses of SPD EEPROMs - */ -#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ -#define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 0 DIMM 1 */ -#define SPD_EEPROM_ADDRESS3 0x53 /* CTLR 1 DIMM 0 */ -#define SPD_EEPROM_ADDRESS4 0x54 /* CTLR 1 DIMM 1 */ - -/* - * These are used when DDR doesn't use SPD. - */ -#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x39357322 -#define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 -#define CONFIG_SYS_DDR_MODE_1 0x00480432 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x06090100 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 -#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ -#define CONFIG_SYS_DDR_CONTROL2 0x04400000 - -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 - -#define CONFIG_SYS_FLASH_BASE 0xef800000 /* start of FLASH 8M */ -#define CONFIG_SYS_FLASH_BASE_PHYS_LOW CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_FLASH_BASE_PHYS \ - PAIRED_PHYS_TO_PHYS(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \ - CONFIG_SYS_PHYS_ADDR_HIGH) - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} - -#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ - | 0x00001001) /* port size 16bit */ -#define CONFIG_SYS_OR0_PRELIM 0xff806ff7 /* 8MB Boot Flash area*/ - -#define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(CF_BASE_PHYS) \ - | 0x00001001) /* port size 16bit */ -#define CONFIG_SYS_OR2_PRELIM 0xffffeff7 /* 32k Compact Flash */ - -#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) \ - | 0x00000801) /* port size 8bit */ -#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32k PIXIS area*/ - -/* - * The LBC_BASE is the base of the region that contains the PIXIS and the CF. - * The PIXIS and CF by themselves aren't large enough to take up the 128k - * required for the smallest BAT mapping, so there's a 64k hole. - */ -#define CONFIG_SYS_LBC_BASE 0xffde0000 -#define CONFIG_SYS_LBC_BASE_PHYS_LOW CONFIG_SYS_LBC_BASE - -#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ -#define PIXIS_BASE (CONFIG_SYS_LBC_BASE + 0x00010000) -#define PIXIS_BASE_PHYS_LOW (CONFIG_SYS_LBC_BASE_PHYS_LOW + 0x00010000) -#define PIXIS_BASE_PHYS PAIRED_PHYS_TO_PHYS(PIXIS_BASE_PHYS_LOW, \ - CONFIG_SYS_PHYS_ADDR_HIGH) -#define PIXIS_SIZE 0x00008000 /* 32k */ -#define PIXIS_ID 0x0 /* Board ID at offset 0 */ -#define PIXIS_VER 0x1 /* Board version at offset 1 */ -#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ -#define PIXIS_RST 0x4 /* PIXIS Reset Control register */ -#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */ -#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ -#define PIXIS_VCTL 0x10 /* VELA Control Register */ -#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ -#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ -#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ -#define PIXIS_VBOOT_FMAP 0x80 /* VBOOT - CFG_FLASHMAP */ -#define PIXIS_VBOOT_FBANK 0x40 /* VBOOT - CFG_FLASHBANK */ -#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ -#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ -#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ -#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ -#define CONFIG_SYS_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ - -/* Compact flash shares a BAT with PIXIS; make sure they're contiguous */ -#define CF_BASE (PIXIS_BASE + PIXIS_SIZE) -#define CF_BASE_PHYS (PIXIS_BASE_PHYS + PIXIS_SIZE) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#if defined(CONFIG_SYS_RAMBOOT) -#undef CONFIG_SPD_EEPROM -#define CONFIG_SYS_SDRAM_SIZE 256 -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#ifndef CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ -#else -#define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* - * RapidIO MMU - */ -#define CONFIG_SYS_SRIO1_MEM_BASE 0x80000000 /* base address */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_SRIO1_MEM_PHYS_LOW 0x00000000 -#define CONFIG_SYS_SRIO1_MEM_PHYS_HIGH 0x0000000c -#else -#define CONFIG_SYS_SRIO1_MEM_PHYS_LOW CONFIG_SYS_SRIO1_MEM_BASE -#define CONFIG_SYS_SRIO1_MEM_PHYS_HIGH 0x00000000 -#endif -#define CONFIG_SYS_SRIO1_MEM_PHYS \ - PAIRED_PHYS_TO_PHYS(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \ - CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) -#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 128M */ - -/* - * General PCI - * Addresses are mapped 1-1. - */ - -#define CONFIG_SYS_PCIE1_NAME "ULI" -#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS_LOW 0x00000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS_HIGH 0x0000000c -#else -#define CONFIG_SYS_PCIE1_MEM_BUS CONFIG_SYS_PCIE1_MEM_VIRT -#define CONFIG_SYS_PCIE1_MEM_PHYS_LOW CONFIG_SYS_PCIE1_MEM_VIRT -#define CONFIG_SYS_PCIE1_MEM_PHYS_HIGH 0x00000000 -#endif -#define CONFIG_SYS_PCIE1_MEM_PHYS \ - PAIRED_PHYS_TO_PHYS(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ - CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE1_IO_PHYS_LOW CONFIG_SYS_PCIE1_IO_VIRT -#define CONFIG_SYS_PCIE1_IO_PHYS \ - PAIRED_PHYS_TO_PHYS(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \ - CONFIG_SYS_PHYS_ADDR_HIGH) -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64K */ - -#ifdef CONFIG_PHYS_64BIT -/* - * Use the same PCI bus address on PCIE1 and PCIE2 if we have PHYS_64BIT. - * This will increase the amount of PCI address space available for - * for mapping RAM. - */ -#define CONFIG_SYS_PCIE2_MEM_BUS CONFIG_SYS_PCIE1_MEM_BUS -#else -#define CONFIG_SYS_PCIE2_MEM_BUS (CONFIG_SYS_PCIE1_MEM_BUS \ - + CONFIG_SYS_PCIE1_MEM_SIZE) -#endif -#define CONFIG_SYS_PCIE2_MEM_VIRT (CONFIG_SYS_PCIE1_MEM_VIRT \ - + CONFIG_SYS_PCIE1_MEM_SIZE) -#define CONFIG_SYS_PCIE2_MEM_PHYS_LOW (CONFIG_SYS_PCIE1_MEM_PHYS_LOW \ - + CONFIG_SYS_PCIE1_MEM_SIZE) -#define CONFIG_SYS_PCIE2_MEM_PHYS_HIGH CONFIG_SYS_PCIE1_MEM_PHYS_HIGH -#define CONFIG_SYS_PCIE2_MEM_PHYS (CONFIG_SYS_PCIE1_MEM_PHYS \ - + CONFIG_SYS_PCIE1_MEM_SIZE) -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_VIRT (CONFIG_SYS_PCIE1_IO_VIRT \ - + CONFIG_SYS_PCIE1_IO_SIZE) -#define CONFIG_SYS_PCIE2_IO_PHYS_LOW (CONFIG_SYS_PCIE1_IO_PHYS_LOW \ - + CONFIG_SYS_PCIE1_IO_SIZE) -#define CONFIG_SYS_PCIE2_IO_PHYS (CONFIG_SYS_PCIE1_IO_PHYS \ - + CONFIG_SYS_PCIE1_IO_SIZE) -#define CONFIG_SYS_PCIE2_IO_SIZE CONFIG_SYS_PCIE1_IO_SIZE - -#if defined(CONFIG_PCI) - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - - -/************************************************************ - * USB support - ************************************************************/ -#define CONFIG_PCI_OHCI 1 -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1 - -/*PCIE video card used*/ -#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE2_IO_VIRT - -/*PCI video card used*/ -/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT*/ - -/* video */ - -#if defined(CONFIG_VIDEO) -#define CONFIG_BIOSEMU -#define CONFIG_ATI_RADEON_FB -#define CONFIG_VIDEO_LOGO -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT -#endif - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#ifdef CONFIG_SCSI_AHCI -#define CONFIG_SATA_ULI5288 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) -#endif - -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" -#define CONFIG_TSEC4 1 -#define CONFIG_TSEC4_NAME "eTSEC4" - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC3_PHY_ADDR 2 -#define TSEC4_PHY_ADDR 3 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define CONFIG_ETHPRIME "eTSEC1" - -#endif /* CONFIG_TSEC_ENET */ - -#ifdef CONFIG_PHYS_64BIT -#define PHYS_HIGH_TO_BXPN(x) ((x & 0x0000000e) << 8) -#define PHYS_HIGH_TO_BX(x) ((x & 0x00000001) << 2) - -/* Put physical address into the BAT format */ -#define BAT_PHYS_ADDR(low, high) \ - (low | PHYS_HIGH_TO_BXPN(high) | PHYS_HIGH_TO_BX(high)) -/* Convert high/low pairs to actual 64-bit value */ -#define PAIRED_PHYS_TO_PHYS(low, high) (low | ((u64)high << 32)) -#else -/* 32-bit systems just ignore the "high" bits */ -#define BAT_PHYS_ADDR(low, high) (low) -#define PAIRED_PHYS_TO_PHYS(low, high) (low) -#endif - -/* - * BAT0 DDR - */ -#define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) - -/* - * BAT1 LBC (PIXIS/CF) - */ -#define CONFIG_SYS_DBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS_LOW, \ - CONFIG_SYS_PHYS_ADDR_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (CONFIG_SYS_LBC_BASE | BATU_BL_128K \ - | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS_LOW, \ - CONFIG_SYS_PHYS_ADDR_HIGH) \ - | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U - -/* if CONFIG_PCI: - * BAT2 PCIE1 and PCIE1 MEM - * if CONFIG_RIO - * BAT2 Rapidio Memory - */ -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ - CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \ - | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ - CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#else /* CONFIG_RIO */ -#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \ - CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M \ - | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \ - CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#endif - -/* - * BAT3 CCSR Space - */ -#define CONFIG_SYS_DBAT3L (BAT_PHYS_ADDR(CONFIG_SYS_CCSRBAR_PHYS_LOW, \ - CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT3L (BAT_PHYS_ADDR(CONFIG_SYS_CCSRBAR_PHYS_LOW, \ - CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U - -#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) -#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATL_PP_RW | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATU_BL_1M | BATU_VS | BATU_VP) -#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU -#endif - -/* - * BAT4 PCIE1_IO and PCIE2_IO - */ -#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \ - CONFIG_SYS_PHYS_ADDR_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \ - | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \ - CONFIG_SYS_PHYS_ADDR_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U - -/* - * BAT5 Init RAM for stack in the CPU DCache (no backing memory) - */ -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L -#define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U - -/* - * BAT6 FLASH - */ -#define CONFIG_SYS_DBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \ - CONFIG_SYS_PHYS_ADDR_HIGH) \ - | BATL_PP_RW | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \ - CONFIG_SYS_PHYS_ADDR_HIGH) \ - | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U - -/* Map the last 1M of flash where we're running from reset */ -#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY - -/* - * BAT7 FREE - used later for tmp mappings - */ -#define CONFIG_SYS_DBAT7L 0x00000000 -#define CONFIG_SYS_DBAT7U 0x00000000 -#define CONFIG_SYS_IBAT7L 0x00000000 -#define CONFIG_SYS_IBAT7U 0x00000000 - -/* - * Environment - */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (256 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -#define CONFIG_HAS_ETH0 1 -#define CONFIG_HAS_ETH1 1 -#define CONFIG_HAS_ETH2 1 -#define CONFIG_HAS_ETH3 1 - -#define CONFIG_IPADDR 192.168.1.100 - -#define CONFIG_HOSTNAME "unknown" -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 0x10000000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=0x18000000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" \ - "fdtaddr=0x17c00000\0" \ - "fdtfile=mpc8641_hpcn.dtb\0" \ - "en-wd=mw.b ffdf0010 0x08; echo -expect:- 08; md.b ffdf0010 1\0" \ - "dis-wd=mw.b ffdf0010 0x00; echo -expect:- 00; md.b ffdf0010 1\0" \ - "maxcpus=2" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND - -#endif /* __CONFIG_H */ -- 2.39.5