From 7f51a4020e0cdcc8d07ed8be861b620e6a1d15d6 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sat, 21 Jul 2018 16:20:28 +0800 Subject: [PATCH] sunxi: add UART0 setup for H6 The UART0 on H6 is available at PH bank (and PF bank, but the PF one is muxed with SD card). Add pinmux configuration. Signed-off-by: Icenowy Zheng Reviewed-by: Andre Przywara Acked-by: Maxime Ripard Reviewed-by: Jagan Teki Tested-by: Jagan Teki --- arch/arm/include/asm/arch-sunxi/gpio.h | 1 + arch/arm/mach-sunxi/board.c | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index e4fe54d8b8..6a5eafc3d3 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -198,6 +198,7 @@ enum sunxi_gpio_number { #define SUN6I_GPH_TWI2 2 #define SUN6I_GPH_UART0 2 #define SUN9I_GPH_UART0 2 +#define SUN50I_H6_GPH_UART0 2 #define SUNXI_GPI_SDC3 2 #define SUN7I_GPI_TWI3 3 diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 40a6436ca5..d22a84ea6b 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -107,6 +107,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN50I_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_GPB_UART0); sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_H6) + sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H6_GPH_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H6_GPH_UART0); + sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T) sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0); -- 2.39.5