From 7b5774e4bd81a84fb93dcfaaa4ec474289d8f52d Mon Sep 17 00:00:00 2001 From: Brad Griffis Date: Mon, 29 Apr 2019 09:59:31 +0530 Subject: [PATCH] arm: mach-omap2: am33xx: Disable EMIF_DEVOFF immediately before hw leveling In case of RTC+DDR resume, need to restore EMIF context before initiating hardware leveling. Signed-off-by: Brad Griffis [j-keerthy@ti.com Fixed the am335x build issues] Signed-off-by: Keerthy --- arch/arm/mach-omap2/am33xx/board.c | 3 --- arch/arm/mach-omap2/am33xx/ddr.c | 14 ++++++++++++++ 2 files changed, 14 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index fe7b8e1e55..5507348981 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -481,9 +481,6 @@ static void rtc_only(void) rtc_only_prcm_init(); sdram_init(); - /* Disable EMIF_DEVOFF for normal operation and to exit self-refresh */ - writel(0, &prm_device->emif_ctrl); - /* Check EMIF4D_SDRAM_CONFIG[31:29] SDRAM_TYPE */ /* Only perform leveling if SDRAM_TYPE = 3 (DDR3) */ sdrc = readl(AM43XX_EMIF_BASE + AM43XX_SDRAM_CONFIG_OFFSET); diff --git a/arch/arm/mach-omap2/am33xx/ddr.c b/arch/arm/mach-omap2/am33xx/ddr.c index 5d947a68c3..c70b6fe31b 100644 --- a/arch/arm/mach-omap2/am33xx/ddr.c +++ b/arch/arm/mach-omap2/am33xx/ddr.c @@ -80,6 +80,11 @@ static void configure_mr(int nr, u32 cs) */ void config_sdram_emif4d5(const struct emif_regs *regs, int nr) { +#ifdef CONFIG_AM43XX + struct prm_device_inst *prm_device = + (struct prm_device_inst *)PRM_DEVICE_INST; +#endif + writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl); writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw); writel(regs->zq_config, &emif_reg[nr]->emif_zq_config); @@ -126,6 +131,15 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr) writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); +#ifdef CONFIG_AM43XX + /* + * Disable EMIF_DEVOFF + * -> Cold Boot: This is just rewriting the default register value. + * -> RTC Resume: Must disable DEVOFF before leveling. + */ + writel(0, &prm_device->emif_ctrl); +#endif + /* Perform hardware leveling for DDR3 */ if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) { writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36) | -- 2.39.5