From 7a4b6f8cf72e3566fd67ea840d248d8a34b8083e Mon Sep 17 00:00:00 2001 From: Takahiro Kuwano Date: Thu, 1 Sep 2022 15:05:33 +0900 Subject: [PATCH] mtd: spi-nor-core: Rework s25hx_t_post_bfpt_fixup() for flash's internal address mode The flash's internal address mode is tracked by nor->add_mode_nbytes and it is set to 3 in BFPT parse. SEMPER multi-die package parts (>1Gb) are 3- or 4-byte address mode by default, depending on model number. We need to make sure that 4-byte address mode is used for multi-die package parts. For single-die package parts (<=1Gb), registers can be accessed by 3-byte address. Read, program, and erase use the 4B opcodes that always take 4-byte address regardless of flash's internal address mode. Signed-off-by: Takahiro Kuwano Reviewed-by: Jagan Teki --- drivers/mtd/spi/spi-nor-core.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 4109e0463a..44674cbec0 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -161,6 +161,7 @@ struct sfdp_header { #define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */ #define BFPT_DWORD16_SOFT_RST BIT(12) +#define BFPT_DWORD16_EX4B_PWRCYC BIT(21) #define BFPT_DWORD18_CMD_EXT_MASK GENMASK(30, 29) #define BFPT_DWORD18_CMD_EXT_REP (0x0UL << 29) /* Repeat */ @@ -3276,10 +3277,24 @@ static int s25hx_t_post_bfpt_fixup(struct spi_nor *nor, nor->erase_opcode = SPINOR_OP_SE_4B; nor->mtd.erasesize = nor->info->sector_size; - ret = set_4byte(nor, nor->info, 1); - if (ret) - return ret; - nor->addr_width = 4; + /* + * The default address mode in multi-die package parts (>1Gb) may be + * 3- or 4-byte, depending on model number. BootROM code in some SoCs + * use 3-byte mode for backward compatibility and should switch to + * 4-byte mode after BootROM phase. Since registers in the 2nd die are + * mapped within 32-bit address space, we need to make sure the flash is + * in 4-byte address mode. The default address mode can be distinguished + * by BFPT 16th DWORD. Power cycle exits 4-byte address mode if default + * is 3-byte address mode. + */ + if (params->size > SZ_128M) { + if (bfpt->dwords[BFPT_DWORD(16)] & BFPT_DWORD16_EX4B_PWRCYC) { + ret = set_4byte(nor, nor->info, 1); + if (ret) + return ret; + } + nor->addr_mode_nbytes = 4; + } /* * The page_size is set to 512B from BFPT, but it actually depends on -- 2.39.5