From 780e31e93fa97fd8da4c27f039ac32a52b98f4ba Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 28 Sep 2018 11:22:39 -0300 Subject: [PATCH] pico-imx7d: Add USB Host support USB OTG2 port is connected to the USB host connector. Add support for it. Signed-off-by: Fabio Estevam Signed-off-by: Otavio Salvador --- board/technexion/pico-imx7d/pico-imx7d.c | 29 +++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c index 0767d0462f..53e14693a5 100644 --- a/board/technexion/pico-imx7d/pico-imx7d.c +++ b/board/technexion/pico-imx7d/pico-imx7d.c @@ -282,7 +282,34 @@ int checkboard(void) return 0; } +static iomux_v3_cfg_t const usb_otg2_pads[] = { + MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +int board_ehci_hcd_init(int port) +{ + switch (port) { + case 0: + break; + case 1: + imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, + ARRAY_SIZE(usb_otg2_pads)); + break; + default: + return -EINVAL; + } + return 0; +} + int board_usb_phy_mode(int port) { - return USB_INIT_DEVICE; + switch (port) { + case 0: + return USB_INIT_DEVICE; + case 1: + return USB_INIT_HOST; + default: + return -EINVAL; + } + return 0; } -- 2.39.5