From 6aa50ae22c63e2b509bad2a815c12946b8a9aaf8 Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Wed, 3 Apr 2019 19:54:46 +0200 Subject: [PATCH] board: mscc: jr2: Update MSCC Jaguar2 boards In Jaguar2 SoC family there are 3 different pcb. Each of this needs to configure the phys in different ways. Therefore implement the function board_phy_config and based on pcb configure them accordingly. Signed-off-by: Horatiu Vultur --- board/mscc/jr2/jr2.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/board/mscc/jr2/jr2.c b/board/mscc/jr2/jr2.c index 58a4a04162..6e5ef4c97f 100644 --- a/board/mscc/jr2/jr2.c +++ b/board/mscc/jr2/jr2.c @@ -6,6 +6,7 @@ #include #include #include +#include enum { BOARD_TYPE_PCB110 = 0xAABBCE00, @@ -64,6 +65,28 @@ static void vcoreiii_gpio_set_alternate(int gpio, int mode) } } +int board_phy_config(struct phy_device *phydev) +{ + if (gd->board_type == BOARD_TYPE_PCB110 || + gd->board_type == BOARD_TYPE_PCB112) { + phy_write(phydev, 0, 31, 0x10); + phy_write(phydev, 0, 18, 0x80F0); + while (phy_read(phydev, 0, 18) & 0x8000) + ; + phy_write(phydev, 0, 31, 0); + } + if (gd->board_type == BOARD_TYPE_PCB111) { + phy_write(phydev, 0, 31, 0x10); + phy_write(phydev, 0, 18, 0x80A0); + while (phy_read(phydev, 0, 18) & 0x8000) + ; + phy_write(phydev, 0, 14, 0x800); + phy_write(phydev, 0, 31, 0); + } + + return 0; +} + void board_debug_uart_init(void) { /* too early for the pinctrl driver, so configure the UART pins here */ -- 2.39.5