From 6943cc9732202b9c65990cff9f74cea6b8173e09 Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Wed, 24 Apr 2019 17:21:29 +0200 Subject: [PATCH] arch: mips: Update initrd_start and initrd_end Microsemi SoC defines CONFIG_SYS_SDRAM_BASE to be 0x80000000, which represents the start of kseg0 and represents a virtual address. Meaning that the initrd_start and initrd_end point somewhere kseg0. When these parameters are passed to linux kernel through DT they are pointing somewhere in kseg0 which is a virtual address but linux kernel expects the addresses to be physical addresses(in kuseg) because it is converting the physical address to a virtual one. Therefore update the uboot to pass the physical address of initrd_start and initrd_end by converting them using the function virt_to_phys before setting up the DT. Signed-off-by: Horatiu Vultur Reviewed-by: Daniel Schwierzeck --- arch/mips/lib/bootm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index 35152cb3f6..6a462f3e5a 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -247,6 +247,8 @@ int arch_fixup_fdt(void *blob) static int boot_setup_fdt(bootm_headers_t *images) { + images->initrd_start = virt_to_phys((void *)images->initrd_start); + images->initrd_end = virt_to_phys((void *)images->initrd_end); return image_setup_libfdt(images, images->ft_addr, images->ft_len, &images->lmb); } -- 2.39.5