From 666671ecc3219bcd61cf3671d4f44c7e2e20135f Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 1 Aug 2021 18:54:41 -0600 Subject: [PATCH] ppc: Drop idt8t49n222a_serdes_clk driver This is not used. Drop it. Signed-off-by: Simon Glass --- board/freescale/common/Makefile | 1 - .../common/idt8t49n222a_serdes_clk.c | 208 ------------------ .../common/idt8t49n222a_serdes_clk.h | 106 --------- 3 files changed, 315 deletions(-) delete mode 100644 board/freescale/common/idt8t49n222a_serdes_clk.c delete mode 100644 board/freescale/common/idt8t49n222a_serdes_clk.h diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 116c1e71cc..3a171688c3 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -63,7 +63,6 @@ obj-$(CONFIG_TARGET_P3041DS) += ics307_clk.o obj-$(CONFIG_TARGET_P4080DS) += ics307_clk.o obj-$(CONFIG_TARGET_P5040DS) += ics307_clk.o obj-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o -obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o obj-$(CONFIG_ZM7300) += zm7300.o obj-$(CONFIG_POWER_PFUZE100) += pfuze.o obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze.o diff --git a/board/freescale/common/idt8t49n222a_serdes_clk.c b/board/freescale/common/idt8t49n222a_serdes_clk.c deleted file mode 100644 index bb3cdac841..0000000000 --- a/board/freescale/common/idt8t49n222a_serdes_clk.c +++ /dev/null @@ -1,208 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * Author: Shaveta Leekha - */ - -#include "idt8t49n222a_serdes_clk.h" -#include -#include - -#define DEVICE_ID_REG 0x00 - -static int check_pll_status(u8 idt_addr) -{ - u8 val = 0; - int ret; - - ret = i2c_read(idt_addr, 0x17, 1, &val, 1); - if (ret < 0) { - printf("IDT:0x%x could not read status register from device.\n", - idt_addr); - return ret; - } - - if (val & 0x04) { - debug("idt8t49n222a PLL is LOCKED: %x\n", val); - } else { - printf("idt8t49n222a PLL is not LOCKED: %x\n", val); - return -1; - } - - return 0; -} - -int set_serdes_refclk(u8 idt_addr, u8 serdes_num, - enum serdes_refclk refclk1, - enum serdes_refclk refclk2, u8 feedback) -{ - u8 dev_id = 0; - int i, ret; - - debug("IDT:Configuring idt8t49n222a device at I2C address: 0x%2x\n", - idt_addr); - - ret = i2c_read(idt_addr, DEVICE_ID_REG, 1, &dev_id, 1); - if (ret < 0) { - debug("IDT:0x%x could not read DEV_ID from device.\n", - idt_addr); - return ret; - } - - if ((dev_id != 0x00) && (dev_id != 0x24) && (dev_id != 0x2a)) { - debug("IDT: device at address 0x%x is not idt8t49n222a.\n", - idt_addr); - } - - if (serdes_num != 1 && serdes_num != 2) { - debug("serdes_num should be 1 for SerDes1 and" - " 2 for SerDes2.\n"); - return -1; - } - - if ((refclk1 == SERDES_REFCLK_122_88 && refclk2 != SERDES_REFCLK_122_88) - || (refclk1 != SERDES_REFCLK_122_88 - && refclk2 == SERDES_REFCLK_122_88)) { - debug("Only one refclk at 122.88MHz is not supported." - " Please set both refclk1 & refclk2 to 122.88MHz" - " or both not to 122.88MHz.\n"); - return -1; - } - - if (refclk1 != SERDES_REFCLK_100 && refclk1 != SERDES_REFCLK_122_88 - && refclk1 != SERDES_REFCLK_125 - && refclk1 != SERDES_REFCLK_156_25) { - debug("refclk1 should be 100MHZ, 122.88MHz, 125MHz" - " or 156.25MHz.\n"); - return -1; - } - - if (refclk2 != SERDES_REFCLK_100 && refclk2 != SERDES_REFCLK_122_88 - && refclk2 != SERDES_REFCLK_125 - && refclk2 != SERDES_REFCLK_156_25) { - debug("refclk2 should be 100MHZ, 122.88MHz, 125MHz" - " or 156.25MHz.\n"); - return -1; - } - - if (feedback != 0 && feedback != 1) { - debug("valid values for feedback are 0(default) or 1.\n"); - return -1; - } - - /* Configuring IDT for output refclks as - * Refclk1 = 122.88MHz Refclk2 = 122.88MHz - */ - if (refclk1 == SERDES_REFCLK_122_88 && - refclk2 == SERDES_REFCLK_122_88) { - printf("Setting refclk1:122.88 and refclk2:122.88\n"); - for (i = 0; i < NUM_IDT_REGS; i++) - i2c_reg_write(idt_addr, idt_conf_122_88[i][0], - idt_conf_122_88[i][1]); - - if (feedback) { - for (i = 0; i < NUM_IDT_REGS_FEEDBACK; i++) - i2c_reg_write(idt_addr, - idt_conf_122_88_feedback[i][0], - idt_conf_122_88_feedback[i][1]); - } - } - - if (refclk1 != SERDES_REFCLK_122_88 && - refclk2 != SERDES_REFCLK_122_88) { - for (i = 0; i < NUM_IDT_REGS; i++) - i2c_reg_write(idt_addr, idt_conf_not_122_88[i][0], - idt_conf_not_122_88[i][1]); - } - - /* Configuring IDT for output refclks as - * Refclk1 = 100MHz Refclk2 = 125MHz - */ - if (refclk1 == SERDES_REFCLK_100 && refclk2 == SERDES_REFCLK_125) { - printf("Setting refclk1:100 and refclk2:125\n"); - i2c_reg_write(idt_addr, 0x11, 0x10); - } - - /* Configuring IDT for output refclks as - * Refclk1 = 125MHz Refclk2 = 125MHz - */ - if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_125) { - printf("Setting refclk1:125 and refclk2:125\n"); - i2c_reg_write(idt_addr, 0x10, 0x10); - i2c_reg_write(idt_addr, 0x11, 0x10); - } - - /* Configuring IDT for output refclks as - * Refclk1 = 125MHz Refclk2 = 100MHz - */ - if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_100) { - printf("Setting refclk1:125 and refclk2:100\n"); - i2c_reg_write(idt_addr, 0x10, 0x10); - } - - /* Configuring IDT for output refclks as - * Refclk1 = 156.25MHz Refclk2 = 156.25MHz - */ - if (refclk1 == SERDES_REFCLK_156_25 && - refclk2 == SERDES_REFCLK_156_25) { - printf("Setting refclk1:156.25 and refclk2:156.25\n"); - for (i = 0; i < NUM_IDT_REGS_156_25; i++) - i2c_reg_write(idt_addr, idt_conf_156_25[i][0], - idt_conf_156_25[i][1]); - } - - /* Configuring IDT for output refclks as - * Refclk1 = 100MHz Refclk2 = 156.25MHz - */ - if (refclk1 == SERDES_REFCLK_100 && - refclk2 == SERDES_REFCLK_156_25) { - printf("Setting refclk1:100 and refclk2:156.25\n"); - for (i = 0; i < NUM_IDT_REGS_156_25; i++) - i2c_reg_write(idt_addr, idt_conf_100_156_25[i][0], - idt_conf_100_156_25[i][1]); - } - - /* Configuring IDT for output refclks as - * Refclk1 = 125MHz Refclk2 = 156.25MHz - */ - if (refclk1 == SERDES_REFCLK_125 && - refclk2 == SERDES_REFCLK_156_25) { - printf("Setting refclk1:125 and refclk2:156.25\n"); - for (i = 0; i < NUM_IDT_REGS_156_25; i++) - i2c_reg_write(idt_addr, idt_conf_125_156_25[i][0], - idt_conf_125_156_25[i][1]); - } - - /* Configuring IDT for output refclks as - * Refclk1 = 156.25MHz Refclk2 = 100MHz - */ - if (refclk1 == SERDES_REFCLK_156_25 && - refclk2 == SERDES_REFCLK_100) { - printf("Setting refclk1:156.25 and refclk2:100\n"); - for (i = 0; i < NUM_IDT_REGS_156_25; i++) - i2c_reg_write(idt_addr, idt_conf_156_25_100[i][0], - idt_conf_156_25_100[i][1]); - } - - /* Configuring IDT for output refclks as - * Refclk1 = 156.25MHz Refclk2 = 125MHz - */ - if (refclk1 == SERDES_REFCLK_156_25 && - refclk2 == SERDES_REFCLK_125) { - printf("Setting refclk1:156.25 and refclk2:125\n"); - for (i = 0; i < NUM_IDT_REGS_156_25; i++) - i2c_reg_write(idt_addr, idt_conf_156_25_125[i][0], - idt_conf_156_25_125[i][1]); - } - - /* waiting for maximum of 1 second if PLL doesn'r get locked - * initially. then check the status again. - */ - if (check_pll_status(idt_addr)) { - mdelay(1000); - if (check_pll_status(idt_addr)) - return -1; - } - - return 0; -} diff --git a/board/freescale/common/idt8t49n222a_serdes_clk.h b/board/freescale/common/idt8t49n222a_serdes_clk.h deleted file mode 100644 index b1528e3266..0000000000 --- a/board/freescale/common/idt8t49n222a_serdes_clk.h +++ /dev/null @@ -1,106 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * Author: Shaveta Leekha - */ - -#ifndef __IDT8T49N222A_SERDES_CLK_H_ -#define __IDT8T49N222A_SERDES_CLK_H_ 1 - -#include -#include -#include "qixis.h" -#include "../b4860qds/b4860qds_qixis.h" -#include - -#define NUM_IDT_REGS 23 -#define NUM_IDT_REGS_FEEDBACK 12 -#define NUM_IDT_REGS_156_25 11 - -/* CLK */ -enum serdes_refclk { - SERDES_REFCLK_100, /* refclk 100Mhz */ - SERDES_REFCLK_122_88, /* refclk 122.88Mhz */ - SERDES_REFCLK_125, /* refclk 125Mhz */ - SERDES_REFCLK_156_25, /* refclk 156.25Mhz */ - SERDES_REFCLK_NONE = -1, -}; - -/* configuration values for IDT registers for Output Refclks: - * Refclk1 = 122.88MHz Refclk2 = 122.88MHz - */ -static const u8 idt_conf_122_88[23][2] = { {0x00, 0x3C}, {0x01, 0x00}, - {0x02, 0x9F}, {0x03, 0x00}, {0x04, 0x0B}, {0x05, 0x00}, - {0x06, 0x00}, {0x07, 0x00}, {0x08, 0x7D}, {0x09, 0x00}, - {0x0A, 0x08}, {0x0B, 0x00}, {0x0C, 0xDC}, {0x0D, 0x00}, - {0x0E, 0x00}, {0x0F, 0x00}, {0x10, 0x12}, {0x11, 0x12}, - {0x12, 0xB9}, {0x13, 0xBC}, {0x14, 0x40}, {0x15, 0x08}, - {0x16, 0xA0} }; - - -/* configuration values for IDT registers for Output Refclks: - * Refclk1 not equal to 122.88MHz Refclk2 not equal to 122.88MHz - */ -static const u8 idt_conf_not_122_88[23][2] = { {0x00, 0x00}, {0x01, 0x00}, - {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x0A}, {0x05, 0x00}, - {0x06, 0x00}, {0x07, 0x00}, {0x08, 0x7D}, {0x09, 0x00}, - {0x0A, 0x08}, {0x0B, 0x00}, {0x0C, 0xDC}, {0x0D, 0x00}, - {0x0E, 0x00}, {0x0F, 0x00}, {0x10, 0x14}, {0x11, 0x14}, - {0x12, 0x35}, {0x13, 0xBC}, {0x14, 0x40}, {0x15, 0x08}, - {0x16, 0xA0} }; - -/* Reconfiguration values for some of IDT registers for - * Output Refclks: - * Refclk1 = 122.88MHz Refclk2 = 122.88MHz - * and with feedback as 1 - */ -static const u8 idt_conf_122_88_feedback[12][2] = { {0x00, 0x50}, {0x02, 0xD7}, - {0x04, 0x89}, {0x06, 0xC3}, {0x08, 0xC0}, {0x0A, 0x07}, - {0x0C, 0x80}, {0x10, 0x10}, {0x11, 0x10}, {0x12, 0x1B}, - {0x14, 0x00}, {0x15, 0xE8} }; - -/* configuration values for IDT registers for Output Refclks: - * Refclk1 : 156.25MHz Refclk2 : 156.25MHz - */ -static const u8 idt_conf_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, - {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, - {0x10, 0x10}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, - {0x15, 0xE8} }; - -/* configuration values for IDT registers for Output Refclks: - * Refclk1 : 100MHz Refclk2 : 156.25MHz - */ -static const u8 idt_conf_100_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, - {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, - {0x10, 0x19}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, - {0x15, 0xE8} }; - -/* configuration values for IDT registers for Output Refclks: - * Refclk1 : 125MHz Refclk2 : 156.25MHz - */ -static const u8 idt_conf_125_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, - {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, - {0x10, 0x14}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, - {0x15, 0xE8} }; - -/* configuration values for IDT registers for Output Refclks: - * Refclk1 : 156.25MHz Refclk2 : 100MHz - */ -static const u8 idt_conf_156_25_100[11][2] = { {0x04, 0x19}, {0x06, 0x03}, - {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, - {0x10, 0x10}, {0x11, 0x19}, {0x12, 0xB5}, {0x13, 0x3C}, - {0x15, 0xE8} }; - -/* configuration values for IDT registers for Output Refclks: - * Refclk1 : 156.25MHz Refclk2 : 125MHz - */ -static const u8 idt_conf_156_25_125[11][2] = { {0x04, 0x19}, {0x06, 0x03}, - {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, - {0x10, 0x10}, {0x11, 0x14}, {0x12, 0xB5}, {0x13, 0x3C}, - {0x15, 0xE8} }; - -int set_serdes_refclk(u8 idt_addr, u8 serdes_num, - enum serdes_refclk refclk1, - enum serdes_refclk refclk2, u8 feedback); - -#endif /*__IDT8T49N222A_SERDES_CLK_H_ */ -- 2.39.5