From 6314d1c8c035d1c4d14ea1ffd133f25385edd067 Mon Sep 17 00:00:00 2001 From: James Byrne Date: Mon, 4 Mar 2019 17:40:34 +0000 Subject: [PATCH] net: phy: micrel: Find Micrel PHY node correctly In some of the device trees that specify skew values for KSZ90x1 PHYs the values are stored (incorrectly) in the MAC node, whereas in others it is in an 'ethernet-phy' subnode. Previously the code would fail to find and program these skew values, so this commit changes it to look for an "ethernet-phy" subnode first, and revert to looking in the MAC node if there isn't one. The device trees affected (where the skew values are in a subnode) are imx6qdl-icore-rqs.dtsi, r8a77970-eagle.dts, r8a77990-ebisu.dts, r8a77995-draak.dts, salvator-common.dtsi, sama5d3xcm.dtsi, sama5d3xcm_cmp.dtsi, socfpga_cyclone5_vining_fpga.dts, socfpga_stratix10_socdk.dts and ulcb.dtsi. Before this change the skew values in these device trees would be ignored. The device trees where the skew values are in the MAC node are socfpga_arria10_socdk.dtsi, socfpga_arria5_socdk.dts, socfpga_cyclone5_de0_nano_soc.dts, socfpga_cyclone5_de10_nano.dts, socfpga_cyclone5_de1_soc.dts, socfpga_cyclone5_is1.dts, socfpga_cyclone5_socdk.dts, socfpga_cyclone5_sockit.dts. These should be unaffected by this change. The changes were tested on a sama5d3xcm. Signed-off-by: James Byrne Acked-by: Joe Hershberger --- drivers/net/phy/micrel_ksz90x1.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/micrel_ksz90x1.c b/drivers/net/phy/micrel_ksz90x1.c index 1f8d86ab2e..8dec9f2367 100644 --- a/drivers/net/phy/micrel_ksz90x1.c +++ b/drivers/net/phy/micrel_ksz90x1.c @@ -114,12 +114,20 @@ static int ksz90x1_of_config_group(struct phy_device *phydev, int val[4]; int i, changed = 0, offset, max; u16 regval = 0; + ofnode node; if (!drv || !drv->writeext) return -EOPNOTSUPP; + /* Look for a PHY node under the Ethernet node */ + node = dev_read_subnode(dev, "ethernet-phy"); + if (!ofnode_valid(node)) { + /* No node found, look in the Ethernet node */ + node = dev_ofnode(dev); + } + for (i = 0; i < ofcfg->grpsz; i++) { - val[i] = dev_read_u32_default(dev, ofcfg->grp[i].name, ~0); + val[i] = ofnode_read_u32_default(node, ofcfg->grp[i].name, ~0); offset = ofcfg->grp[i].off; if (val[i] == -1) { /* Default register value for KSZ9021 */ -- 2.39.5