From 6239cc8c4e8484d908afc555eb59441a16a58b53 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 1 Feb 2021 11:26:41 +0530 Subject: [PATCH] arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot Sync all J7200 related v5.11-rc6 Linux kernel dts into U-Boot. MCU R5F nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid regressions, r5f nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla --- .../k3-j7200-common-proc-board-u-boot.dtsi | 16 +- arch/arm/dts/k3-j7200-common-proc-board.dts | 122 +++++--- arch/arm/dts/k3-j7200-main.dtsi | 296 +++++++++++++++--- arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 230 +++++++------- arch/arm/dts/k3-j7200-som-p0.dtsi | 107 ++++++- arch/arm/dts/k3-j7200.dtsi | 27 +- 6 files changed, 583 insertions(+), 215 deletions(-) diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi index 0a5faa2134..e52f7e1e86 100644 --- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi @@ -11,13 +11,13 @@ aliases { ethernet0 = &cpsw_port1; + i2c0 = &wkup_i2c0; + i2c1 = &mcu_i2c0; + i2c2 = &mcu_i2c1; + i2c3 = &main_i2c0; }; }; -&chipid { - u-boot,dm-spl; -}; - &cbass_main { u-boot,dm-spl; }; @@ -36,6 +36,10 @@ clock-frequency = <25000000>; u-boot,dm-spl; }; + + chipid@43000014 { + u-boot,dm-spl; + }; }; &secure_proxy_main { @@ -136,10 +140,6 @@ u-boot,dm-spl; }; -&wkup_gpio0 { - u-boot,dm-spl; -}; - &mcu_fss0_hpb0_pins_default { u-boot,dm-spl; }; diff --git a/arch/arm/dts/k3-j7200-common-proc-board.dts b/arch/arm/dts/k3-j7200-common-proc-board.dts index 85cb159838..5120711d4f 100644 --- a/arch/arm/dts/k3-j7200-common-proc-board.dts +++ b/arch/arm/dts/k3-j7200-common-proc-board.dts @@ -5,9 +5,10 @@ /dts-v1/; -#include #include "k3-j7200-som-p0.dtsi" #include +#include +#include / { chosen { @@ -60,7 +61,7 @@ >; }; - mcu_cpsw_pins_default: mcu_cpsw_pins_default { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ @@ -77,7 +78,7 @@ >; }; - mcu_mdio_pins_default: mcu_mdio1_pins_default { + mcu_mdio_pins_default: mcu-mdio1-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ @@ -93,7 +94,14 @@ >; }; - main_mmc1_pins_default: main_mmc1_pins_default { + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ + J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */ J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */ @@ -112,7 +120,7 @@ >; }; - main_usbss0_pins_default: main_usbss0_pins_default { + main_usbss0_pins_default: main-usbss0-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ >; @@ -121,16 +129,17 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ - status = "disabled"; + status = "reserved"; }; &main_uart0 { + /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; }; &main_uart2 { /* MAIN UART 2 is used by R5F firmware */ - status = "disabled"; + status = "reserved"; }; &main_uart3 { @@ -168,27 +177,22 @@ status = "disabled"; }; -&wkup_i2c0 { +&mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&wkup_i2c0_pins_default>; - clock-frequency = <400000>; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; }; -&main_sdhci0 { - /* eMMC */ - non-removable; - ti,driver-strength-ohm = <50>; - disable-wp; +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = ; + ti,fifo-depth = ; + }; }; -&main_sdhci1 { - /* SD card */ - pinctrl-0 = <&main_mmc1_pins_default>; - pinctrl-names = "default"; - vmmc-supply = <&vdd_mmc1>; - vqmmc-supply = <&vdd_sd_dv>; - ti,driver-strength-ohm = <50>; - disable-wp; +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; }; &main_i2c0 { @@ -211,37 +215,69 @@ }; }; -&usbss0 { +/* + * The j7200 CPB board is identical to the CPB used for J721E, the SOMs can be + * swapped on the CPB. + * + * main_i2c1 of J7200 is connected to the CPB i2c bus labeled as i2c3. + * The i2c1 of the CPB (as it is labeled) is not connected to j7200. + */ +&main_i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&main_usbss0_pins_default>; - ti,vbus-divider; - ti,usb2-only; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + exp3: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "CODEC_RSTz", "CODEC_SPARE1", "UB926_RESETn", + "UB926_LOCK", "UB926_PWR_SW_CNTRL", + "UB926_TUNER_RESET", "UB926_GPIO_SPARE", ""; + }; }; -&usb0 { - dr_mode = "otg"; - maximum-speed = "high-speed"; +&main_sdhci0 { + /* eMMC */ + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; }; -&wkup_gpio0 { +&main_sdhci1 { + /* SD card */ + pinctrl-0 = <&main_mmc1_pins_default>; pinctrl-names = "default"; - pinctrl-0 = <&wkup_gpio_pins_default>; + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + ti,driver-strength-ohm = <50>; + disable-wp; }; -&mcu_cpsw { +&serdes_ln_ctrl { + idle-states = , , + , ; +}; + +&usb_serdes_mux { + idle-states = <1>; /* USB0 to SERDES lane 3 */ +}; + +&usbss0 { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&main_usbss0_pins_default>; + ti,vbus-divider; + ti,usb2-only; }; -&davinci_mdio { - phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = ; - ti,fifo-depth = ; - }; +&usb0 { + dr_mode = "otg"; + maximum-speed = "high-speed"; }; -&cpsw_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&phy0>; +&tscadc0 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; }; diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi index 9e6f738c64..1131464075 100644 --- a/arch/arm/dts/k3-j7200-main.dtsi +++ b/arch/arm/dts/k3-j7200-main.dtsi @@ -8,13 +8,34 @@ &cbass_main { msmc_ram: sram@70000000 { compatible = "mmio-sram"; - reg = <0x0 0x70000000 0x0 0x100000>; + reg = <0x00 0x70000000 0x00 0x100000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x70000000 0x100000>; + ranges = <0x00 0x00 0x70000000 0x100000>; atf-sram@0 { - reg = <0x0 0x20000>; + reg = <0x00 0x20000>; + }; + }; + + scm_conf: scm-conf@100000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x00100000 0x00 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00100000 0x1c000>; + + serdes_ln_ctrl: serdes-ln-ctrl@4080 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ + <0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */ + }; + + usb_serdes_mux: mux-controller@4000 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ }; }; @@ -40,11 +61,48 @@ }; }; - main_navss: navss@30000000 { + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <131>; + ti,interrupt-ranges = <8 392 56>; + }; + + main_navss: bus@30000000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; + ti,sci-dev-id = <199>; + + main_navss_intr: interrupt-controller1 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <213>; + ti,interrupt-ranges = <0 64 64>, + <64 448 64>, + <128 672 64>; + }; + + main_udmass_inta: msi-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x33d00000 0x00 0x100000>; + interrupt-controller; + #interrupt-cells = <0>; + interrupt-parent = <&main_navss_intr>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <209>; + ti,interrupt-ranges = <0 0 256>; + }; secure_proxy_main: mailbox@32c00000 { compatible = "ti,am654-secure-proxy"; @@ -56,12 +114,174 @@ interrupt-names = "rx_011"; interrupts = ; }; + + hwspinlock: spinlock@30e00000 { + compatible = "ti,am654-hwspinlock"; + reg = <0x00 0x30e00000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster1: mailbox@31f81000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f81000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster2: mailbox@31f82000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f82000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster3: mailbox@31f83000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f83000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster4: mailbox@31f84000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f84000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster5: mailbox@31f85000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f85000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster6: mailbox@31f86000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f86000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster7: mailbox@31f87000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f87000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster8: mailbox@31f88000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f88000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster9: mailbox@31f89000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f89000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster10: mailbox@31f8a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster11: mailbox@31f8b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + main_ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x00 0x3c000000 0x00 0x400000>, + <0x00 0x38000000 0x00 0x400000>, + <0x00 0x31120000 0x00 0x100>, + <0x00 0x33000000 0x00 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <1024>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <211>; + msi-parent = <&main_udmass_inta>; + }; + + main_udmap: dma-controller@31150000 { + compatible = "ti,j721e-navss-main-udmap"; + reg = <0x00 0x31150000 0x00 0x100>, + <0x00 0x34000000 0x00 0x100000>, + <0x00 0x35000000 0x00 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <212>; + ti,ringacc = <&main_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>, /* TX_HCHAN */ + <0x10>; /* TX_UHCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>, /* RX_HCHAN */ + <0x0c>; /* RX_UHCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; + + cpts@310d0000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x310d0000 0x00 0x400>; + reg-names = "cpts"; + clocks = <&k3_clks 201 1>; + clock-names = "cpts"; + interrupts-extended = <&main_navss_intr 391>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + }; }; - main_pmx0: pinmux@11c000 { + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x0 0x11c000 0x0 0x2b4>; + reg = <0x00 0x11c000 0x00 0x2b4>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; @@ -197,28 +417,6 @@ clock-names = "fclk"; }; - main_gpio0: gpio@600000 { - compatible = "ti,j721e-gpio", "ti,keystone-gpio"; - reg = <0x0 0x00600000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <105 0 IRQ_TYPE_EDGE_RISING>, - <105 1 IRQ_TYPE_EDGE_RISING>, - <105 2 IRQ_TYPE_EDGE_RISING>, - <105 3 IRQ_TYPE_EDGE_RISING>, - <105 4 IRQ_TYPE_EDGE_RISING>, - <105 5 IRQ_TYPE_EDGE_RISING>, - <105 6 IRQ_TYPE_EDGE_RISING>, - <105 7 IRQ_TYPE_EDGE_RISING>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <69>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 105 0>; - clock-names = "gpio"; - }; - main_sdhci0: sdhci@4f80000 { compatible = "ti,j721e-sdhci-8bit"; reg = <0x0 0x04f80000 0x0 0x260>, <0x0 0x4f88000 0x0 0x134>; @@ -259,18 +457,18 @@ main_i2c0: i2c@2000000 { compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2000000 0x0 0x100>; + reg = <0x00 0x2000000 0x00 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 187 1>; - power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>; + power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>; }; main_i2c1: i2c@2010000 { compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2010000 0x0 0x100>; + reg = <0x00 0x2010000 0x00 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; @@ -281,7 +479,7 @@ main_i2c2: i2c@2020000 { compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2020000 0x0 0x100>; + reg = <0x00 0x2020000 0x00 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; @@ -292,7 +490,7 @@ main_i2c3: i2c@2030000 { compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2030000 0x0 0x100>; + reg = <0x00 0x2030000 0x00 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; @@ -303,7 +501,7 @@ main_i2c4: i2c@2040000 { compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2040000 0x0 0x100>; + reg = <0x00 0x2040000 0x00 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; @@ -314,7 +512,7 @@ main_i2c5: i2c@2050000 { compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2050000 0x0 0x100>; + reg = <0x00 0x2050000 0x00 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; @@ -325,7 +523,7 @@ main_i2c6: i2c@2060000 { compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2060000 0x0 0x100>; + reg = <0x00 0x2060000 0x00 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; @@ -334,13 +532,35 @@ power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>; }; - usbss0: cdns_usb@4104000 { + main_gpio0: gpio@600000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <105 0 IRQ_TYPE_EDGE_RISING>, + <105 1 IRQ_TYPE_EDGE_RISING>, + <105 2 IRQ_TYPE_EDGE_RISING>, + <105 3 IRQ_TYPE_EDGE_RISING>, + <105 4 IRQ_TYPE_EDGE_RISING>, + <105 5 IRQ_TYPE_EDGE_RISING>, + <105 6 IRQ_TYPE_EDGE_RISING>, + <105 7 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <69>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 105 0>; + clock-names = "gpio"; + }; + + usbss0: cdns-usb@4104000 { compatible = "ti,j721e-usb"; reg = <0x00 0x4104000 0x00 0x100>; dma-coherent; power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 288 12>, <&k3_clks 288 3>; - clock-names = "usb2_refclk", "lpm_clk"; + clock-names = "ref", "lpm"; assigned-clocks = <&k3_clks 288 12>; /* USB2_REFCLK */ assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */ #address-cells = <2>; diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi index 1faffe62fe..ac78d4cb68 100644 --- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi @@ -16,7 +16,7 @@ <&secure_proxy_main 13>; reg-names = "debug_messages"; - reg = <0x00 0x44083000 0x0 0x1000>; + reg = <0x00 0x44083000 0x00 0x1000>; k3_pds: power-controller { compatible = "ti,sci-pm-domain"; @@ -34,12 +34,26 @@ }; }; - chipid: chipid@43000014 { + mcu_conf: syscon@40f00000 { + compatible = "syscon", "simple-mfd"; + reg = <0x00 0x40f00000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x40f00000 0x20000>; + + phy_gmii_sel: phy@4040 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4040 0x4>; + #phy-cells = <1>; + }; + }; + + chipid@43000014 { compatible = "ti,am654-chipid"; - reg = <0x0 0x43000014 0x0 0x4>; + reg = <0x00 0x43000014 0x00 0x4>; }; - wkup_pmx0: pinmux@4301c000 { + wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c000 0x00 0x178>; @@ -51,7 +65,7 @@ mcu_ram: sram@41c00000 { compatible = "mmio-sram"; reg = <0x00 0x41c00000 0x00 0x100000>; - ranges = <0x0 0x00 0x41c00000 0x100000>; + ranges = <0x00 0x00 0x41c00000 0x100000>; #address-cells = <1>; #size-cells = <1>; }; @@ -69,17 +83,6 @@ clock-names = "fclk"; }; - wkup_i2c0: i2c@42120000 { - compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x42120000 0x0 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 197 1>; - power-domains = <&k3_pds 197 TI_SCI_PD_EXCLUSIVE>; - }; - mcu_uart0: serial@40a00000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x40a00000 0x00 0x100>; @@ -93,84 +96,47 @@ clock-names = "fclk"; }; - fss: system-controller@47000000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0x47000000 0x0 0x100>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hbmc_mux: hbmc-mux { - compatible = "mmio-mux"; - #mux-control-cells = <1>; - mux-reg-masks = <0x4 0x2>; /* HBMC select */ - }; - - hbmc: hyperbus@47034000 { - compatible = "ti,am654-hbmc"; - reg = <0x0 0x47034000 0x0 0x100>, - <0x5 0x00000000 0x1 0x0000000>; - power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <2>; - #size-cells = <1>; - mux-controls = <&hbmc_mux 0>; - clocks = <&k3_clks 102 5>; - assigned-clocks = <&k3_clks 102 5>; - assigned-clock-rates = <333333333>; - }; - }; - - mcu_i2c0: i2c@40b00000 { - compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x40b00000 0x0 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 194 1>; - power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>; - }; - - mcu_i2c1: i2c@40b10000 { - compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x0 0x40b10000 0x0 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 195 1>; - power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>; + wkup_gpio_intr: interrupt-controller2 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <137>; + ti,interrupt-ranges = <16 960 16>; }; - cbass_mcu_navss: mcu-navss { + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; dma-coherent; dma-ranges; - ti,sci-dev-id = <232>; mcu_ringacc: ringacc@2b800000 { compatible = "ti,am654-navss-ringacc"; - reg = <0x0 0x2b800000 0x0 0x400000>, - <0x0 0x2b000000 0x0 0x400000>, - <0x0 0x28590000 0x0 0x100>, - <0x0 0x2a500000 0x0 0x40000>; + reg = <0x00 0x2b800000 0x00 0x400000>, + <0x00 0x2b000000 0x00 0x400000>, + <0x00 0x28590000 0x00 0x100>, + <0x00 0x2a500000 0x00 0x40000>; reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; ti,num-rings = <286>; ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ ti,sci = <&dmsc>; ti,sci-dev-id = <235>; + msi-parent = <&main_udmass_inta>; }; mcu_udmap: dma-controller@285c0000 { compatible = "ti,j721e-navss-mcu-udmap"; - reg = <0x0 0x285c0000 0x0 0x100>, - <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; + reg = <0x00 0x285c0000 0x00 0x100>, + <0x00 0x2a800000 0x00 0x40000>, + <0x00 0x2aa00000 0x00 0x40000>; reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; #dma-cells = <1>; ti,sci = <&dmsc>; @@ -185,40 +151,13 @@ }; }; - wkup_gpio0: gpio@42110000 { - compatible = "ti,j721e-gpio", "ti,keystone-gpio"; - reg = <0x0 0x42110000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - ti,ngpio = <84>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 113 0>; - clock-names = "gpio"; - }; - - mcu_conf: scm_conf@40f00000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0x40f00000 0x0 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x40f00000 0x20000>; - - phy_gmii_sel: phy@4040 { - compatible = "ti,am654-cpsw-phy-sel"; - reg = <0x4040 0x4>; - reg-names = "gmii-sel"; - #phy-cells = <1>; - }; - }; - mcu_cpsw: ethernet@46000000 { compatible = "ti,j721e-cpsw-nuss"; #address-cells = <2>; #size-cells = <2>; - reg = <0x0 0x46000000 0x0 0x200000>; + reg = <0x00 0x46000000 0x00 0x200000>; reg-names = "cpsw_nuss"; - ranges; + ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>; dma-coherent; clocks = <&k3_clks 18 21>; clock-names = "fck"; @@ -244,7 +183,7 @@ cpsw_port1: port@1 { reg = <1>; ti,mac-only; - ti,label = "port1"; + label = "port1"; ti,syscon-efuse = <&mcu_conf 0x200>; phys = <&phy_gmii_sel 1>; }; @@ -252,7 +191,7 @@ davinci_mdio: mdio@f00 { compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x0 0xf00 0x0 0x100>; + reg = <0x00 0xf00 0x00 0x100>; #address-cells = <1>; #size-cells = <0>; clocks = <&k3_clks 18 21>; @@ -260,7 +199,9 @@ bus_freq = <1000000>; }; - cpts { + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; clocks = <&k3_clks 18 2>; clock-names = "cpts"; interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; @@ -270,6 +211,85 @@ }; }; + mcu_i2c0: i2c@40b00000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x40b00000 0x00 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 194 1>; + power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>; + }; + + mcu_i2c1: i2c@40b10000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x40b10000 0x00 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 195 1>; + power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>; + }; + + wkup_i2c0: i2c@42120000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x42120000 0x00 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 197 1>; + power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>; + }; + + fss: syscon@47000000 { + compatible = "syscon", "simple-mfd"; + reg = <0x00 0x47000000 0x00 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hbmc_mux: hbmc-mux { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4 0x2>; /* HBMC select */ + }; + + hbmc: hyperbus@47034000 { + compatible = "ti,am654-hbmc"; + reg = <0x00 0x47034000 0x00 0x100>, + <0x05 0x00000000 0x01 0x0000000>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 0>; + assigned-clocks = <&k3_clks 102 5>; + assigned-clock-rates = <333333333>; + #address-cells = <2>; + #size-cells = <1>; + mux-controls = <&hbmc_mux 0>; + }; + }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40200000 0x00 0x1000>; + interrupts = ; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 1>; + assigned-clocks = <&k3_clks 0 3>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + mcu_r5fss0: r5fss@41000000 { compatible = "ti,j7200-r5fss"; ti,cluster-mode = <1>; diff --git a/arch/arm/dts/k3-j7200-som-p0.dtsi b/arch/arm/dts/k3-j7200-som-p0.dtsi index ea5280ded7..7b5e9aa032 100644 --- a/arch/arm/dts/k3-j7200-som-p0.dtsi +++ b/arch/arm/dts/k3-j7200-som-p0.dtsi @@ -11,8 +11,8 @@ memory@80000000 { device_type = "memory"; /* 4G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>, - <0x00000008 0x80000000 0x00000000 0x80000000>; + reg = <0x00 0x80000000 0x00 0x80000000>, + <0x08 0x80000000 0x00 0x80000000>; }; reserved_memory: reserved-memory { @@ -48,15 +48,112 @@ }; }; +&main_pmx0 { + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ + J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ + >; + }; +}; + &hbmc { + /* OSPI and HBMC are muxed inside FSS, Bootloader will enable + * appropriate node based on board detection + */ status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_hpb0_pins_default>; - ranges = <0x0 0x0 0x5 0x0 0x4000000>, /* 64MB Flash on CS0 */ - <0x1 0x0 0x5 0x4000000 0x800000>; /* 8MB RAM on CS1 */ + ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */ + <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */ flash@0,0 { compatible = "cypress,hyperflash", "cfi-flash"; - reg = <0x0 0x0 0x4000000>; + reg = <0x00 0x00 0x4000000>; + }; +}; + +&mailbox0_cluster0 { + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <432>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + exp_som: gpio@21 { + compatible = "ti,tca6408"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0", + "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1", + "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL", + "GPIO_LIN_EN", "CAN_STB"; }; }; diff --git a/arch/arm/dts/k3-j7200.dtsi b/arch/arm/dts/k3-j7200.dtsi index 126c31bac7..66169bcf7c 100644 --- a/arch/arm/dts/k3-j7200.dtsi +++ b/arch/arm/dts/k3-j7200.dtsi @@ -30,18 +30,10 @@ serial9 = &main_uart7; serial10 = &main_uart8; serial11 = &main_uart9; - i2c0 = &wkup_i2c0; - i2c1 = &mcu_i2c0; - i2c2 = &mcu_i2c1; - i2c3 = &main_i2c0; - i2c4 = &main_i2c1; - i2c5 = &main_i2c2; - i2c6 = &main_i2c3; - i2c7 = &main_i2c4; - i2c8 = &main_i2c5; - i2c9 = &main_i2c6; }; + chosen { }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -63,7 +55,7 @@ reg = <0x000>; device_type = "cpu"; enable-method = "psci"; - i-cache-size = <0xC000>; + i-cache-size = <0xc000>; i-cache-line-size = <64>; i-cache-sets = <256>; d-cache-size = <0x8000>; @@ -77,7 +69,7 @@ reg = <0x001>; device_type = "cpu"; enable-method = "psci"; - i-cache-size = <0xC000>; + i-cache-size = <0xc000>; i-cache-line-size = <64>; i-cache-sets = <256>; d-cache-size = <0x8000>; @@ -132,11 +124,12 @@ #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ - <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */ - <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT */ + <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */ + <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */ /* MCUSS_WKUP Range */ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, @@ -150,7 +143,8 @@ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>; + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; cbass_mcu_wakeup: bus@28380000 { compatible = "simple-bus"; @@ -167,7 +161,8 @@ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>; /* FSS OSPI0 data region 3 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */ }; }; }; -- 2.39.5