From 5ebe6c0cb74a93ae75a1dd37e92e3765511f788c Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 16 Sep 2019 13:47:16 +0530 Subject: [PATCH] cmd: ti: ddr3: Fix ecc address calculation ecc_address_range registers contains the start address and end address of the DDR address space. But the ddr cmd driver is assuming the register contains the start address and size of the DDR address space. Because of this some valid ecc addresses are errored out as invalid address. Fix this calculation. Signed-off-by: Lokesh Vutla --- cmd/ti/ddr3.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/cmd/ti/ddr3.c b/cmd/ti/ddr3.c index b82cbe152d..34f870ab43 100644 --- a/cmd/ti/ddr3.c +++ b/cmd/ti/ddr3.c @@ -242,8 +242,8 @@ static int is_addr_valid(u32 addr) if (ecc_ctrl & EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK) { start_addr = ((range & EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16) + CONFIG_SYS_SDRAM_BASE; - end_addr = start_addr + (range & EMIF_ECC_REG_ECC_END_ADDR_MASK) - + 0xFFFF; + end_addr = (range & EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0xFFFF + + CONFIG_SYS_SDRAM_BASE; if ((addr >= start_addr) && (addr <= end_addr)) /* addr within ecc address range 1 */ return 1; @@ -254,8 +254,8 @@ static int is_addr_valid(u32 addr) range = readl(&emif->emif_ecc_address_range_2); start_addr = ((range & EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16) + CONFIG_SYS_SDRAM_BASE; - end_addr = start_addr + (range & EMIF_ECC_REG_ECC_END_ADDR_MASK) - + 0xFFFF; + end_addr = (range & EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0xFFFF + + CONFIG_SYS_SDRAM_BASE; if ((addr >= start_addr) && (addr <= end_addr)) /* addr within ecc address range 2 */ return 1; -- 2.39.5