From 590d48e9d1cc3a32626643f4acdeb4a762d92616 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 2 Sep 2020 08:29:09 +0200 Subject: [PATCH] mips: octeon: dram.c: Add RAM driver support This patch adds the initialization call for the Octeon RAM driver to the Octeon platforms code. So if enabled via Kconfig, the DDR driver will be called and the RAM will be configured and used. If the RAM driver is not enabled, the L2 cache is still used as RAM. Signed-off-by: Stefan Roese --- arch/mips/mach-octeon/dram.c | 72 ++++++++++++++++++++++++++++++++---- 1 file changed, 64 insertions(+), 8 deletions(-) diff --git a/arch/mips/mach-octeon/dram.c b/arch/mips/mach-octeon/dram.c index ff7a59f2ab..6dc08e19da 100644 --- a/arch/mips/mach-octeon/dram.c +++ b/arch/mips/mach-octeon/dram.c @@ -1,28 +1,84 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) Stefan Roese + * Copyright (C) 2020 Stefan Roese */ +#include #include #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; +#define UBOOT_RAM_SIZE_MAX 0x10000000ULL + int dram_init(void) { - /* - * No DDR init yet -> run in L2 cache - */ - gd->ram_size = (4 << 20); - gd->bd->bi_dram[0].size = gd->ram_size; - gd->bd->bi_dram[1].size = 0; + if (IS_ENABLED(CONFIG_RAM_OCTEON)) { + struct ram_info ram; + struct udevice *dev; + int ret; + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return ret; + } + + ret = ram_get_info(dev, &ram); + if (ret) { + debug("Cannot get DRAM size: %d\n", ret); + return ret; + } + + gd->ram_size = min_t(size_t, ram.size, UBOOT_RAM_SIZE_MAX); + debug("SDRAM base=%lx, size=%lx\n", + (unsigned long)ram.base, (unsigned long)ram.size); + } else { + /* + * No DDR init yet -> run in L2 cache + */ + gd->ram_size = (4 << 20); + gd->bd->bi_dram[0].size = gd->ram_size; + gd->bd->bi_dram[1].size = 0; + } return 0; } +void board_add_ram_info(int use_default) +{ + if (IS_ENABLED(CONFIG_RAM_OCTEON)) { + struct ram_info ram; + struct udevice *dev; + int ret; + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return; + } + + ret = ram_get_info(dev, &ram); + if (ret) { + debug("Cannot get DRAM size: %d\n", ret); + return; + } + + printf(" ("); + print_size(ram.size, " total)"); + } +} + ulong board_get_usable_ram_top(ulong total_size) { - return gd->ram_top; + if (IS_ENABLED(CONFIG_RAM_OCTEON)) { + /* Map a maximum of 256MiB - return not size but address */ + return CONFIG_SYS_SDRAM_BASE + min(gd->ram_size, + UBOOT_RAM_SIZE_MAX); + } else { + return gd->ram_top; + } } -- 2.39.5