From 56610ef5f39d465299f8032eae4efa9362a8a2e7 Mon Sep 17 00:00:00 2001 From: Mathew McBride Date: Fri, 21 Jul 2023 04:39:25 +0000 Subject: [PATCH] board: traverse: ten64: fix allocation order of MAC addresses On Ten64 boards, the "serial number" is the MAC address of the first Gigabit Ethernet interface (labelled GE0 on the appliance), and counted up from there. The previous logic did not take into account U-Boot's ordering of the network interfaces. By setting aliases/ethernetX in the device tree we can ensure the U-Boot 'ethX' is the same as the labelled port order on the unit, as well as the one adopted by Linux. Signed-off-by: Mathew McBride --- arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi | 10 ++++++++++ board/traverse/ten64/ten64.c | 4 ++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi b/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi index 89566bf849..4e6700d586 100644 --- a/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi @@ -6,6 +6,16 @@ /{ aliases { spi0 = &qspi; + ethernet0 = &dpmac7; + ethernet1 = &dpmac8; + ethernet2 = &dpmac9; + ethernet3 = &dpmac10; + ethernet4 = &dpmac3; + ethernet5 = &dpmac4; + ethernet6 = &dpmac5; + ethernet7 = &dpmac6; + ethernet8 = &dpmac2; + ethernet9 = &dpmac1; }; }; diff --git a/board/traverse/ten64/ten64.c b/board/traverse/ten64/ten64.c index 39f0d107cd..0febc0baf0 100644 --- a/board/traverse/ten64/ten64.c +++ b/board/traverse/ten64/ten64.c @@ -328,8 +328,8 @@ static void ten64_set_macaddrs_from_board_info(struct t64uc_board_info *boardinf this_dpmac_num = allocation_order[intfidx]; printf("DPMAC%d: %s\n", this_dpmac_num, ethaddr); snprintf(enetvar, 10, - (this_dpmac_num != 1) ? "eth%daddr" : "ethaddr", - this_dpmac_num - 1); + (intfidx != 0) ? "eth%daddr" : "ethaddr", + intfidx); macaddr++; if (!env_get(enetvar)) -- 2.39.5