From 509b8e7ba13a7c262fb673fbf77a997977b14991 Mon Sep 17 00:00:00 2001 From: Ye Li Date: Wed, 6 Apr 2022 14:30:14 +0800 Subject: [PATCH] imx: imx8ulp: cgc: Switch to NICLPAV to FRO192 before PLL4 init When reset with dual boot mode, the LPAV domain won't power down due to its master is not assigned to APD. So the NICLPAV keeps the last setting to use PLL4PFD1. So before SPL initialize the PLL4, we need to switch NICLPAV to FRO192, otherwise system will hang. Reviewed-by: Peng Fan Signed-off-by: Ye Li Signed-off-by: Peng Fan --- arch/arm/mach-imx/imx8ulp/cgc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/mach-imx/imx8ulp/cgc.c b/arch/arm/mach-imx/imx8ulp/cgc.c index ccd977f1a5..d240abaee4 100644 --- a/arch/arm/mach-imx/imx8ulp/cgc.c +++ b/arch/arm/mach-imx/imx8ulp/cgc.c @@ -189,6 +189,14 @@ void cgc1_pll3_init(ulong freq) void cgc2_pll4_init(bool pll4_reset) { + /* Check the NICLPAV first to ensure not from PLL4 PFD1 clock */ + if ((readl(&cgc2_regs->niclpavclk) & GENMASK(29, 28)) == BIT(28)) { + /* switch to FRO 192 first */ + clrbits_le32(&cgc2_regs->niclpavclk, GENMASK(29, 28)); + while (!(readl(&cgc2_regs->niclpavclk) & BIT(27))) + ; + } + /* Disable PFD DIV and clear DIV */ writel(0x80808080, &cgc2_regs->pll4div_pfd0); writel(0x80808080, &cgc2_regs->pll4div_pfd1); -- 2.39.5