From 4c2105cb9fc6f2cd871ad6b5c3c1a0b116196804 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 9 May 2011 18:33:36 -0400 Subject: [PATCH] cfi_flash: reverse geometry for newer STM parts For newer STM parts where CFI >= 1.1, there is a byte in the extended structure that declares the flash layout type (just like the AMD parts), so key off of that to find out when we need to reverse the geometry. This can be seen with M29W640 parts where U-Boot does: Bank # 1: CFI conformant FLASH (16 x 16) Size: 8 MB in 135 Sectors AMD Standard command set, Manufacturer ID: 0x20, Device ID: 0x22ED Erase timeout: 8192 ms, write timeout: 1 ms Buffer write timeout: 1 ms, buffer size: 16 bytes Sector Start Addresses: 20000000 RO 20002000 RO 20004000 RO 20006000 RO 20008000 RO 2000A000 RO 2000C000 RO 2000E000 RO 20010000 RO 20020000 RO ... But Linux does: physmap platform flash device: 00800000 at 20000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000020 Chip ID 0x0022ed physmap-flash.0: Swapping erase regions for top-boot CFI table. Signed-off-by: Mike Frysinger Signed-off-by: Stefan Roese --- drivers/mtd/cfi_flash.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 6039e1fadc..929f9a9d73 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1874,6 +1874,10 @@ static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry) info->device_id == 0x22D7) { /* M29W800DT */ cfi_reverse_geometry(qry); } + } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { + /* CFI >= 1.1, deduct from top/bottom flag */ + /* note: ext_addr is valid since cfi_version > 0 */ + cfi_reverse_geometry(qry); } } } -- 2.39.5