From 442e6305b5b02d689774a0bf73311643ffa0df6f Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 21 Jan 2021 13:57:07 -0700 Subject: [PATCH] x86: coral: Support TPM and RTC in SPL Update the devicetree so that the TPM and RTC can be used in SPL. Also enable the pins used for getting the memory configuration settings while we are here. Signed-off-by: Simon Glass --- arch/x86/dts/chromebook_coral.dts | 20 +++++++++++++++++++- arch/x86/include/asm/arch-apollolake/iomap.h | 3 +++ 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts index 965f59276a..9319123c0c 100644 --- a/arch/x86/dts/chromebook_coral.dts +++ b/arch/x86/dts/chromebook_coral.dts @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /dts-v1/; +#include #include /include/ "skeleton.dtsi" @@ -99,6 +100,7 @@ clk: clock { compatible = "intel,apl-clk"; #clock-cells = <1>; + u-boot,dm-pre-reloc; }; cpus { @@ -139,6 +141,7 @@ }; acpi_gpe: general-purpose-events { + u-boot,dm-pre-reloc; reg = ; compatible = "intel,acpi-gpe"; interrupt-controller; @@ -417,8 +420,10 @@ }; i2c_2: i2c2@16,2 { - compatible = "intel,apl-i2c"; + compatible = "intel,apl-i2c", "snps,designware-i2c-pci"; reg = <0x0200b210 0 0 0 0>; + early-regs = ; + u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <0>; clock-frequency = <400000>; @@ -429,6 +434,7 @@ tpm: tpm@50 { reg = <0x50>; compatible = "google,cr50"; + u-boot,dm-pre-reloc; u-boot,i2c-offset-len = <0>; ready-gpios = <&gpio_n 28 GPIO_ACTIVE_LOW>; interrupts-extended = <&acpi_gpe GPIO_28_IRQ @@ -583,6 +589,7 @@ u-boot,dm-pre-reloc; cros_ec: cros-ec { u-boot,dm-pre-proper; + u-boot,dm-vpl; compatible = "google,cros-ec-lpc"; reg = <0x204 1 0x200 1 0x880 0x80>; @@ -658,6 +665,11 @@ PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1) /* LPC_AD3 */ PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */ PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */ + + PAD_CFG_GPI(GPIO_101, NONE, DEEP) /* FST_IO2 -- MEM_CONFIG0 */ + PAD_CFG_GPI(GPIO_102, NONE, DEEP) /* FST_IO3 -- MEM_CONFIG1 */ + PAD_CFG_GPI(GPIO_38, NONE, DEEP) /* LPSS_UART0_RXD - MEM_CONFIG2*/ + PAD_CFG_GPI(GPIO_45, NONE, DEEP) /* LPSS_UART1_CTS - MEM_CONFIG3 */ >; }; @@ -1211,3 +1223,9 @@ PAD_CFG_GPI(GPIO_73, UP_20K, DEEP) /* GP_CAMERASB11 */ >; }; + +&rtc { + #address-cells = <1>; + #size-cells = <0>; + u-boot,dm-pre-reloc; +}; diff --git a/arch/x86/include/asm/arch-apollolake/iomap.h b/arch/x86/include/asm/arch-apollolake/iomap.h index 21c5f33021..a4ea150707 100644 --- a/arch/x86/include/asm/arch-apollolake/iomap.h +++ b/arch/x86/include/asm/arch-apollolake/iomap.h @@ -33,6 +33,9 @@ #define SRAM_SIZE_2 (4 * KiB) #endif +/* Early address for I2C port 2 */ +#define IOMAP_I2C2_BASE (0xfe020000 + 2 * 0x1000) + /* * Use UART2. To use UART1 you need to set '2' to '1', change device tree serial * node name and 'reg' property, and update CONFIG_DEBUG_UART_BASE. -- 2.39.5