From 40f5046c221a7b2719c49b51acefe12914b213e5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 29 May 2024 16:47:58 +0200 Subject: [PATCH] arm64: versal2: Add support for AMD Versal Gen 2 Add support for AMD Versal Gen 2. SoC is based on Cortex-a78ae 4 cluster/2 cpu core each. A lot of IPs are shared with previous families. There are couple of new IP blocks where the most interesting from user point of view is UFS. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/bc2b70831ce1031bd0fac32357bff84936e1310f.1716994063.git.michal.simek@amd.com --- arch/arm/Kconfig | 14 + arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/amd-versal2-virt.dts | 11 + arch/arm/mach-versal2/Kconfig | 55 +++ arch/arm/mach-versal2/Makefile | 10 + arch/arm/mach-versal2/clk.c | 34 ++ arch/arm/mach-versal2/cpu.c | 93 +++++ arch/arm/mach-versal2/include/mach/hardware.h | 97 +++++ .../arm/mach-versal2/include/mach/sys_proto.h | 9 + board/amd/common | 1 + board/amd/versal2/Kconfig | 16 + board/amd/versal2/MAINTAINERS | 7 + board/amd/versal2/Makefile | 11 + board/amd/versal2/board.c | 343 ++++++++++++++++++ board/amd/versal2/cmds.c | 81 +++++ board/xilinx/Kconfig | 6 +- configs/amd_versal2_virt_defconfig | 145 ++++++++ drivers/gpio/Kconfig | 2 +- drivers/mailbox/Kconfig | 2 +- env/Kconfig | 6 +- include/configs/amd_versal2.h | 143 ++++++++ 22 files changed, 1081 insertions(+), 8 deletions(-) create mode 100644 arch/arm/dts/amd-versal2-virt.dts create mode 100644 arch/arm/mach-versal2/Kconfig create mode 100644 arch/arm/mach-versal2/Makefile create mode 100644 arch/arm/mach-versal2/clk.c create mode 100644 arch/arm/mach-versal2/cpu.c create mode 100644 arch/arm/mach-versal2/include/mach/hardware.h create mode 100644 arch/arm/mach-versal2/include/mach/sys_proto.h create mode 120000 board/amd/common create mode 100644 board/amd/versal2/Kconfig create mode 100644 board/amd/versal2/MAINTAINERS create mode 100644 board/amd/versal2/Makefile create mode 100644 board/amd/versal2/board.c create mode 100644 board/amd/versal2/cmds.c create mode 100644 configs/amd_versal2_virt_defconfig create mode 100644 include/configs/amd_versal2.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d9a4c993c..db692b2d21 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1235,6 +1235,18 @@ config ARCH_VERSAL imply BOARD_LATE_INIT imply ENV_VARS_UBOOT_RUNTIME_CONFIG +config ARCH_VERSAL2 + bool "Support AMD Versal Gen 2 Platform" + select ARM64 + select CLK + select DM + select DM_MMC if MMC + select DM_SERIAL + select OF_CONTROL + imply BOARD_LATE_INIT + imply ENV_VARS_UBOOT_RUNTIME_CONFIG + imply ZYNQMP_FIRMWARE + config ARCH_VERSAL_NET bool "Support Xilinx Versal NET Platform" select ARM64 @@ -2317,6 +2329,8 @@ source "arch/arm/mach-zynqmp/Kconfig" source "arch/arm/mach-versal/Kconfig" +source "arch/arm/mach-versal2/Kconfig" + source "arch/arm/mach-versal-net/Kconfig" source "arch/arm/mach-zynqmp-r5/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 734c6d6992..dbeedbe544 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -90,6 +90,7 @@ machine-$(CONFIG_ARCH_OCTEONTX) += octeontx machine-$(CONFIG_ARCH_OCTEONTX2) += octeontx2 machine-$(CONFIG_ARCH_UNIPHIER) += uniphier machine-$(CONFIG_ARCH_VERSAL) += versal +machine-$(CONFIG_ARCH_VERSAL2) += versal2 machine-$(CONFIG_ARCH_VERSAL_NET) += versal-net machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_ARCH_ZYNQMP) += zynqmp diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index cef42ab53a..14e851b900 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -341,6 +341,8 @@ dtb-$(CONFIG_ARCH_VERSAL) += \ versal-mini-qspi-x2-single.dtb \ versal-mini-qspi-x2-stacked.dtb \ xilinx-versal-virt.dtb +dtb-$(CONFIG_ARCH_VERSAL2) += \ + amd-versal2-virt.dtb dtb-$(CONFIG_ARCH_VERSAL_NET) += \ versal-net-mini.dtb \ versal-net-mini-emmc.dtb \ diff --git a/arch/arm/dts/amd-versal2-virt.dts b/arch/arm/dts/amd-versal2-virt.dts new file mode 100644 index 0000000000..3b6cbbac58 --- /dev/null +++ b/arch/arm/dts/amd-versal2-virt.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Empty device tree for amd-versal2-virt board + * + * Copyright (C) 2024, Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/ { +}; diff --git a/arch/arm/mach-versal2/Kconfig b/arch/arm/mach-versal2/Kconfig new file mode 100644 index 0000000000..3f18e3351a --- /dev/null +++ b/arch/arm/mach-versal2/Kconfig @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0 + +if ARCH_VERSAL2 + +config SYS_BOARD + string "Board name" + default "versal2" + +config SYS_VENDOR + string "Vendor name" + default "amd" + +config SYS_SOC + default "versal2" + +config SYS_CONFIG_NAME + string "Board configuration name" + default "amd_versal2" + help + This option contains information about board configuration name. + Based on this option include/configs/.h header + will be used for board configuration. + +config COUNTER_FREQUENCY + int "Timer clock frequency" + default 0 + help + Setup time clock frequency for certain platform + +config IOU_SWITCH_DIVISOR0 + hex "IOU switch divisor0" + default 0x20 + help + Setup time clock divisor for input clock. + +config SYS_MEM_RSVD_FOR_MMU + bool "Reserve memory for MMU Table" + help + If defined this option is used to setup different space for + MMU table than the one which will be allocated during + relocation. + +config GICV3 + def_bool y + +config SYS_MALLOC_LEN + default 0x2000000 + +config ZYNQ_SDHCI_MAX_FREQ + default 200000000 + +source "board/xilinx/Kconfig" +source "board/amd/versal2/Kconfig" + +endif diff --git a/arch/arm/mach-versal2/Makefile b/arch/arm/mach-versal2/Makefile new file mode 100644 index 0000000000..96497b1dfd --- /dev/null +++ b/arch/arm/mach-versal2/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2021 - 2022, Xilinx, Inc. +# Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc. +# +# Michal Simek +# + +obj-y += clk.o +obj-y += cpu.o diff --git a/arch/arm/mach-versal2/clk.c b/arch/arm/mach-versal2/clk.c new file mode 100644 index 0000000000..e73ae9af07 --- /dev/null +++ b/arch/arm/mach-versal2/clk.c @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 - 2022, Xilinx, Inc. + * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc. + * + * Michal Simek + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_CLOCKS +/** + * set_cpu_clk_info - Initialize clock framework + * + * Return: 0 always. + * + * This function is called from common code after relocation and sets up the + * clock framework. The framework must not be used before this function had been + * called. + */ +int set_cpu_clk_info(void) +{ + gd->cpu_clk = get_tbclk(); + + gd->bd->bi_arm_freq = gd->cpu_clk / 1000000; + gd->bd->bi_dsp_freq = 0; + + return 0; +} +#endif diff --git a/arch/arm/mach-versal2/cpu.c b/arch/arm/mach-versal2/cpu.c new file mode 100644 index 0000000000..2dfcadb369 --- /dev/null +++ b/arch/arm/mach-versal2/cpu.c @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 - 2022, Xilinx, Inc. + * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc. + * + * Michal Simek + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define VERSAL2_MEM_MAP_USED 5 + +#define DRAM_BANKS CONFIG_NR_DRAM_BANKS + +/* +1 is end of list which needs to be empty */ +#define VERSAL2_MEM_MAP_MAX (VERSAL2_MEM_MAP_USED + DRAM_BANKS + 1) + +static struct mm_region versal2_mem_map[VERSAL2_MEM_MAP_MAX] = { + { + .virt = 0x80000000UL, + .phys = 0x80000000UL, + .size = 0x70000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + .virt = 0xf0000000UL, + .phys = 0xf0000000UL, + .size = 0x0fe00000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + .virt = 0x400000000UL, + .phys = 0x400000000UL, + .size = 0x200000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + .virt = 0x600000000UL, + .phys = 0x600000000UL, + .size = 0x800000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + .virt = 0xe00000000UL, + .phys = 0xe00000000UL, + .size = 0xf200000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + } +}; + +void mem_map_fill(void) +{ + int banks = VERSAL2_MEM_MAP_USED; + + for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + /* Zero size means no more DDR that's this is end */ + if (!gd->bd->bi_dram[i].size) + break; + + versal2_mem_map[banks].virt = gd->bd->bi_dram[i].start; + versal2_mem_map[banks].phys = gd->bd->bi_dram[i].start; + versal2_mem_map[banks].size = gd->bd->bi_dram[i].size; + versal2_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE; + banks = banks + 1; + } +} + +struct mm_region *mem_map = versal2_mem_map; + +u64 get_page_table_size(void) +{ + return 0x14000; +} + +U_BOOT_DRVINFO(soc_amd_versal2) = { + .name = "soc_amd_versal2", +}; diff --git a/arch/arm/mach-versal2/include/mach/hardware.h b/arch/arm/mach-versal2/include/mach/hardware.h new file mode 100644 index 0000000000..42e3061a0a --- /dev/null +++ b/arch/arm/mach-versal2/include/mach/hardware.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016 - 2022, Xilinx, Inc. + * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc. + */ + +#ifndef __ASSEMBLY__ +#include +#endif + +struct crlapb_regs { + u32 reserved0[67]; + u32 cpu_r5_ctrl; + u32 reserved; + u32 iou_switch_ctrl; /* 0x114 */ + u32 reserved1[13]; + u32 timestamp_ref_ctrl; /* 0x14c */ + u32 reserved3[108]; + u32 rst_cpu_r5; + u32 reserved2[17]; + u32 rst_timestamp; /* 0x348 */ +}; + +struct iou_scntrs_regs { + u32 counter_control_register; /* 0x0 */ + u32 reserved0[7]; + u32 base_frequency_id_register; /* 0x20 */ +}; + +struct crp_regs { + u32 reserved0[128]; + u32 boot_mode_usr; /* 0x200 */ +}; + +#define VERSAL2_CRL_APB_BASEADDR 0xEB5E0000 +#define VERSAL2_CRP_BASEADDR 0xF1260000 +#define VERSAL2_IOU_SCNTR_SECURE 0xEC920000 + +#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT BIT(25) +#define IOU_SWITCH_CTRL_CLKACT_BIT BIT(25) +#define IOU_SWITCH_CTRL_DIVISOR0_SHIFT 8 +#define IOU_SCNTRS_CONTROL_EN 1 + +#define crlapb_base ((struct crlapb_regs *)VERSAL2_CRL_APB_BASEADDR) +#define crp_base ((struct crp_regs *)VERSAL2_CRP_BASEADDR) +#define iou_scntr_secure ((struct iou_scntrs_regs *)VERSAL2_IOU_SCNTR_SECURE) + +#define PMC_TAP 0xF11A0000 + +#define PMC_TAP_IDCODE (PMC_TAP + 0) +#define PMC_TAP_VERSION (PMC_TAP + 0x4) +# define PMC_VERSION_MASK GENMASK(7, 0) +# define PS_VERSION_MASK GENMASK(15, 8) +# define PS_VERSION_PRODUCTION 0x20 +# define RTL_VERSION_MASK GENMASK(23, 16) +# define PLATFORM_MASK GENMASK(27, 24) +# define PLATFORM_VERSION_MASK GENMASK(31, 28) +#define PMC_TAP_USERCODE (PMC_TAP + 0x8) + +/* Bootmode setting values */ +#define BOOT_MODES_MASK 0x0000000F +#define QSPI_MODE_24BIT 0x00000001 +#define QSPI_MODE_32BIT 0x00000002 +#define SD_MODE 0x00000003 /* sd 0 */ +#define SD_MODE1 0x00000005 /* sd 1 */ +#define EMMC_MODE 0x00000006 +#define USB_MODE 0x00000007 +#define OSPI_MODE 0x00000008 +#define SELECTMAP_MODE 0x0000000A +#define SD1_LSHFT_MODE 0x0000000E /* SD1 Level shifter */ +#define JTAG_MODE 0x00000000 +#define BOOT_MODE_USE_ALT 0x100 +#define BOOT_MODE_ALT_SHIFT 12 + +enum versal2_platform { + VERSAL2_SILICON = 0, + VERSAL2_SPP = 1, + VERSAL2_EMU = 2, + VERSAL2_QEMU = 3, + VERSAL2_SPP_MMD = 5, + VERSAL2_EMU_MMD = 6, +}; + +#define VERSAL2_SLCR_BASEADDR 0xF1060000 +#define VERSAL_AXI_MUX_SEL (VERSAL2_SLCR_BASEADDR + 0x504) +#define VERSAL_OSPI_LINEAR_MODE BIT(1) + +#define FLASH_RESET_GPIO 0xc +#define WPROT_CRP 0xF126001C +#define RST_GPIO 0xF1260318 +#define WPROT_LPD_MIO 0xFF080728 +#define WPROT_PMC_MIO 0xF1060828 +#define BOOT_MODE_DIR 0xF1020204 +#define BOOT_MODE_OUT 0xF1020208 +#define MIO_PIN_12 0xF1060030 +#define BANK0_OUTPUT 0xF1020040 +#define BANK0_TRI 0xF1060200 diff --git a/arch/arm/mach-versal2/include/mach/sys_proto.h b/arch/arm/mach-versal2/include/mach/sys_proto.h new file mode 100644 index 0000000000..7b1726a7ef --- /dev/null +++ b/arch/arm/mach-versal2/include/mach/sys_proto.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2021 - 2022, Xilinx, Inc. + * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc. + */ + +#include + +void mem_map_fill(void); diff --git a/board/amd/common b/board/amd/common new file mode 120000 index 0000000000..cd4d172974 --- /dev/null +++ b/board/amd/common @@ -0,0 +1 @@ +../xilinx/common/ \ No newline at end of file diff --git a/board/amd/versal2/Kconfig b/board/amd/versal2/Kconfig new file mode 100644 index 0000000000..ab46af6935 --- /dev/null +++ b/board/amd/versal2/Kconfig @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2020 - 2022, Xilinx, Inc. +# Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc. +# +if ARCH_VERSAL2 + +config CMD_VERSAL2 + bool "Enable Versal Gen 2 specific commands" + default y + depends on ZYNQMP_FIRMWARE + help + Select this to enable AMD Versal Gen 2 specific commands. + Commands like versal2 loadpdi are enabled by this. + +endif diff --git a/board/amd/versal2/MAINTAINERS b/board/amd/versal2/MAINTAINERS new file mode 100644 index 0000000000..af7913d8db --- /dev/null +++ b/board/amd/versal2/MAINTAINERS @@ -0,0 +1,7 @@ +XILINX_VERSAL2 BOARDS +M: Michal Simek +S: Maintained +T: git https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze.git +F: arch/arm/dts/versal2* +F: board/amd/ +F: configs/amd* diff --git a/board/amd/versal2/Makefile b/board/amd/versal2/Makefile new file mode 100644 index 0000000000..3a044517f0 --- /dev/null +++ b/board/amd/versal2/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2021 - 2022, Xilinx, Inc. +# Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc. +# +# Michal Simek +# + +obj-y := board.o + +obj-$(CONFIG_CMD_VERSAL2) += cmds.o diff --git a/board/amd/versal2/board.c b/board/amd/versal2/board.c new file mode 100644 index 0000000000..5651d516a9 --- /dev/null +++ b/board/amd/versal2/board.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 - 2022, Xilinx, Inc. + * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc. + * + * Michal Simek + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../../xilinx/common/board.h" + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + printf("EL Level:\tEL%d\n", current_el()); + + return 0; +} + +static u32 platform_id, platform_version; + +char *soc_name_decode(void) +{ + char *name, *platform_name; + + switch (platform_id) { + case VERSAL2_SPP: + platform_name = "spp"; + break; + case VERSAL2_EMU: + platform_name = "emu"; + break; + case VERSAL2_SPP_MMD: + platform_name = "spp-mmd"; + break; + case VERSAL2_EMU_MMD: + platform_name = "emu-mmd"; + break; + case VERSAL2_QEMU: + platform_name = "qemu"; + break; + default: + return NULL; + } + + /* + * --rev. are 6 chars + * max platform name is qemu which is 4 chars + * platform version number are 1+1 + * Plus 1 char for \n + */ + name = calloc(1, strlen(CONFIG_SYS_BOARD) + 13); + if (!name) + return NULL; + + sprintf(name, "%s-%s-rev%d.%d-el%d", CONFIG_SYS_BOARD, + platform_name, platform_version / 10, + platform_version % 10, current_el()); + + return name; +} + +bool soc_detection(void) +{ + u32 version, ps_version; + + version = readl(PMC_TAP_VERSION); + platform_id = FIELD_GET(PLATFORM_MASK, version); + ps_version = FIELD_GET(PS_VERSION_MASK, version); + + debug("idcode %x, version %x, usercode %x\n", + readl(PMC_TAP_IDCODE), version, + readl(PMC_TAP_USERCODE)); + + debug("pmc_ver %lx, ps version %x, rtl version %lx\n", + FIELD_GET(PMC_VERSION_MASK, version), + ps_version, + FIELD_GET(RTL_VERSION_MASK, version)); + + platform_version = FIELD_GET(PLATFORM_VERSION_MASK, version); + + debug("Platform id: %d version: %d.%d\n", platform_id, + platform_version / 10, platform_version % 10); + + return true; +} + +int board_early_init_r(void) +{ + u32 val; + + if (current_el() != 3) + return 0; + + debug("iou_switch ctrl div0 %x\n", + readl(&crlapb_base->iou_switch_ctrl)); + + writel(IOU_SWITCH_CTRL_CLKACT_BIT | + (CONFIG_IOU_SWITCH_DIVISOR0 << IOU_SWITCH_CTRL_DIVISOR0_SHIFT), + &crlapb_base->iou_switch_ctrl); + + /* Global timer init - Program time stamp reference clk */ + val = readl(&crlapb_base->timestamp_ref_ctrl); + val |= CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT; + writel(val, &crlapb_base->timestamp_ref_ctrl); + + debug("ref ctrl 0x%x\n", + readl(&crlapb_base->timestamp_ref_ctrl)); + + /* Clear reset of timestamp reg */ + writel(0, &crlapb_base->rst_timestamp); + + /* + * Program freq register in System counter and + * enable system counter. + */ + writel(CONFIG_COUNTER_FREQUENCY, + &iou_scntr_secure->base_frequency_id_register); + + debug("counter val 0x%x\n", + readl(&iou_scntr_secure->base_frequency_id_register)); + + writel(IOU_SCNTRS_CONTROL_EN, + &iou_scntr_secure->counter_control_register); + + debug("scntrs control 0x%x\n", + readl(&iou_scntr_secure->counter_control_register)); + debug("timer 0x%llx\n", get_ticks()); + debug("timer 0x%llx\n", get_ticks()); + + return 0; +} + +static u8 versal_net_get_bootmode(void) +{ + u8 bootmode; + u32 reg = 0; + + reg = readl(&crp_base->boot_mode_usr); + + if (reg >> BOOT_MODE_ALT_SHIFT) + reg >>= BOOT_MODE_ALT_SHIFT; + + bootmode = reg & BOOT_MODES_MASK; + + return bootmode; +} + +static int boot_targets_setup(void) +{ + u8 bootmode; + struct udevice *dev; + int bootseq = -1; + int bootseq_len = 0; + int env_targets_len = 0; + const char *mode = NULL; + char *new_targets; + char *env_targets; + + bootmode = versal_net_get_bootmode(); + + puts("Bootmode: "); + switch (bootmode) { + case USB_MODE: + puts("USB_MODE\n"); + mode = "usb_dfu0 usb_dfu1"; + break; + case JTAG_MODE: + puts("JTAG_MODE\n"); + mode = "jtag pxe dhcp"; + break; + case QSPI_MODE_24BIT: + puts("QSPI_MODE_24\n"); + if (uclass_get_device_by_name(UCLASS_SPI, + "spi@f1030000", &dev)) { + debug("QSPI driver for QSPI device is not present\n"); + break; + } + mode = "xspi"; + bootseq = dev_seq(dev); + break; + case QSPI_MODE_32BIT: + puts("QSPI_MODE_32\n"); + if (uclass_get_device_by_name(UCLASS_SPI, + "spi@f1030000", &dev)) { + debug("QSPI driver for QSPI device is not present\n"); + break; + } + mode = "xspi"; + bootseq = dev_seq(dev); + break; + case OSPI_MODE: + puts("OSPI_MODE\n"); + if (uclass_get_device_by_name(UCLASS_SPI, + "spi@f1010000", &dev)) { + debug("OSPI driver for OSPI device is not present\n"); + break; + } + mode = "xspi"; + bootseq = dev_seq(dev); + break; + case EMMC_MODE: + puts("EMMC_MODE\n"); + mode = "mmc"; + bootseq = dev_seq(dev); + break; + case SELECTMAP_MODE: + puts("SELECTMAP_MODE\n"); + break; + case SD_MODE: + puts("SD_MODE\n"); + if (uclass_get_device_by_name(UCLASS_MMC, + "mmc@f1040000", &dev)) { + debug("SD0 driver for SD0 device is not present\n"); + break; + } + debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev)); + + mode = "mmc"; + bootseq = dev_seq(dev); + break; + case SD1_LSHFT_MODE: + puts("LVL_SHFT_"); + fallthrough; + case SD_MODE1: + puts("SD_MODE1\n"); + if (uclass_get_device_by_name(UCLASS_MMC, + "mmc@f1050000", &dev)) { + debug("SD1 driver for SD1 device is not present\n"); + break; + } + debug("mmc1 device found at %p, seq %d\n", dev, dev_seq(dev)); + + mode = "mmc"; + bootseq = dev_seq(dev); + break; + default: + printf("Invalid Boot Mode:0x%x\n", bootmode); + break; + } + + if (mode) { + if (bootseq >= 0) { + bootseq_len = snprintf(NULL, 0, "%i", bootseq); + debug("Bootseq len: %x\n", bootseq_len); + } + + /* + * One terminating char + one byte for space between mode + * and default boot_targets + */ + env_targets = env_get("boot_targets"); + if (env_targets) + env_targets_len = strlen(env_targets); + + new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + + bootseq_len); + if (!new_targets) + return -ENOMEM; + + if (bootseq >= 0) + sprintf(new_targets, "%s%x %s", mode, bootseq, + env_targets ? env_targets : ""); + else + sprintf(new_targets, "%s %s", mode, + env_targets ? env_targets : ""); + + env_set("boot_targets", new_targets); + } + + return 0; +} + +int board_late_init(void) +{ + int ret; + + if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { + debug("Saved variables - Skipping\n"); + return 0; + } + + if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) + return 0; + + if (IS_ENABLED(CONFIG_DISTRO_DEFAULTS)) { + ret = boot_targets_setup(); + if (ret) + return ret; + } + + return board_late_init_xilinx(); +} + +int dram_init_banksize(void) +{ + int ret; + + ret = fdtdec_setup_memory_banksize(); + if (ret) + return ret; + + mem_map_fill(); + + return 0; +} + +int dram_init(void) +{ + int ret; + + if (IS_ENABLED(CONFIG_SYS_MEM_RSVD_FOR_MMU)) + ret = fdtdec_setup_mem_size_base(); + else + ret = fdtdec_setup_mem_size_base_lowest(); + + if (ret) + return -EINVAL; + + return 0; +} + +void reset_cpu(void) +{ +} diff --git a/board/amd/versal2/cmds.c b/board/amd/versal2/cmds.c new file mode 100644 index 0000000000..fbd99918a7 --- /dev/null +++ b/board/amd/versal2/cmds.c @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2024, Advanced Micro Devices, Inc. + * + * Michal Simek + */ + +#include +#include +#include +#include +#include +#include +#include + +/** + * do_versal2_load_pdi - Handle the "versal2 load pdi" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Processes the versal2 load pdi command + * + * Return: return 0 on success, Error value if command fails. + * CMD_RET_USAGE incase of incorrect/missing parameters. + */ +static int do_versal2_load_pdi(struct cmd_tbl *cmdtp, int flag, int argc, + char * const argv[]) +{ + u32 buf_lo, buf_hi; + u32 ret_payload[PAYLOAD_ARG_CNT]; + ulong addr, *pdi_buf; + size_t len; + int ret; + + if (argc != cmdtp->maxargs) { + debug("pdi_load: incorrect parameters passed\n"); + return CMD_RET_USAGE; + } + + addr = simple_strtol(argv[1], NULL, 16); + if (!addr) { + debug("pdi_load: zero pdi_data address\n"); + return CMD_RET_USAGE; + } + + len = hextoul(argv[2], NULL); + if (!len) { + debug("pdi_load: zero size\n"); + return CMD_RET_USAGE; + } + + pdi_buf = (ulong *)ALIGN((ulong)addr, ARCH_DMA_MINALIGN); + if ((ulong)addr != (ulong)pdi_buf) { + memcpy((void *)pdi_buf, (void *)addr, len); + debug("Pdi addr:0x%lx aligned to 0x%lx\n", + addr, (ulong)pdi_buf); + } + + flush_dcache_range((ulong)pdi_buf, (ulong)pdi_buf + len); + + buf_lo = lower_32_bits((ulong)pdi_buf); + buf_hi = upper_32_bits((ulong)pdi_buf); + + ret = xilinx_pm_request(VERSAL_PM_LOAD_PDI, VERSAL_PM_PDI_TYPE, buf_lo, + buf_hi, 0, ret_payload); + if (ret) + printf("PDI load failed with err: 0x%08x\n", ret); + + return cmd_process_error(cmdtp, ret); +} + +static char versal2_help_text[] = + "loadpdi addr len - Load pdi image\n" + "load pdi image at ddr address 'addr' with pdi image size 'len'\n" +; + +U_BOOT_CMD_WITH_SUBCMDS(versal2, "Versal Gen 2 sub-system", versal2_help_text, + U_BOOT_SUBCMD_MKENT(loadpdi, 3, 1, + do_versal2_load_pdi)); diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index 5c4ad8f1df..c7df4ab578 100644 --- a/board/xilinx/Kconfig +++ b/board/xilinx/Kconfig @@ -42,7 +42,7 @@ endif config XILINX_OF_BOARD_DTB_ADDR hex "Default DTB pickup address" - default 0x1000 if ARCH_VERSAL || ARCH_VERSAL_NET + default 0x1000 if ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2 default 0x8000 if MICROBLAZE default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP default 0x23000000 if TARGET_XILINX_MBV @@ -52,10 +52,10 @@ config XILINX_OF_BOARD_DTB_ADDR config BOOT_SCRIPT_OFFSET hex "Boot script offset" - depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || MICROBLAZE || TARGET_XILINX_MBV + depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2 || MICROBLAZE || TARGET_XILINX_MBV default 0xFC0000 if ARCH_ZYNQ || MICROBLAZE default 0x3E80000 if ARCH_ZYNQMP - default 0x7F80000 if ARCH_VERSAL || ARCH_VERSAL_NET + default 0x7F80000 if ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2 default 0 if TARGET_XILINX_MBV help Specifies distro boot script offset in NAND/QSPI/NOR flash. diff --git a/configs/amd_versal2_virt_defconfig b/configs/amd_versal2_virt_defconfig new file mode 100644 index 0000000000..5eea07f03f --- /dev/null +++ b/configs/amd_versal2_virt_defconfig @@ -0,0 +1,145 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=375000 +CONFIG_POSITION_INDEPENDENT=y +CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864 +CONFIG_ARCH_VERSAL2=y +CONFIG_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x100000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-virt" +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_BASE=0xf1920000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_CMD_FRU=y +CONFIG_SYS_LOAD_ADDR=0x8000000 +CONFIG_DEBUG_UART=y +CONFIG_SYS_MEMTEST_START=0x00000000 +CONFIG_SYS_MEMTEST_END=0x00001000 +CONFIG_REMAKE_ELF=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_BOOTM_LEN=0x6400000 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTDELAY=5 +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_USE_PREBOOT=y +CONFIG_SYS_PBSIZE=2073 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_CLOCKS=y +CONFIG_SYS_PROMPT="versal2> " +CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_SHA1SUM=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_SPI=y +CONFIG_CMD_UFS=y +CONFIG_CMD_USB=y +CONFIG_BOOTP_MAY_FAIL=y +CONFIG_BOOTP_BOOTFILESIZE=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_TIME=y +CONFIG_CMD_RNG=y +CONFIG_CMD_KASLRSEED=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_TPM=y +CONFIG_CMD_SCMI=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_SQUASHFS=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_OF_BOARD=y +CONFIG_DTB_RESELECT=y +CONFIG_MULTI_DTB_FIT=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y +CONFIG_IP_DEFRAG=y +CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y +CONFIG_TFTP_BLOCKSIZE=4096 +CONFIG_CLK_CCF=y +CONFIG_CLK_SCMI=y +CONFIG_DFU_RAM=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_DM_MAILBOX=y +CONFIG_ZYNQMP_IPI=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_MMC_SDHCI=y +CONFIG_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_MT35XU=y +CONFIG_SPI_FLASH_SST=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI_DP83867=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH_PHY=y +CONFIG_PHY_GIGE=y +CONFIG_XILINX_AXIEMAC=y +CONFIG_ZYNQ_GEM=y +CONFIG_POWER_DOMAIN=y +CONFIG_RESET_SCMI=y +CONFIG_SCSI=y +CONFIG_DEBUG_UART_PL011=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_ARM_DCC=y +CONFIG_PL01X_SERIAL=y +CONFIG_XILINX_UARTLITE=y +CONFIG_SOC_DEVICE=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_ZYNQ_SPI=y +CONFIG_TPM2_TIS_SPI=y +CONFIG_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_THOR=y +CONFIG_UFS=y +CONFIG_CADENCE_UFS=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_NET=y +CONFIG_VIRTIO_BLK=y +CONFIG_TPM=y diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b050585389..2c0e244b9e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -487,7 +487,7 @@ config MVEBU_GPIO config ZYNQ_GPIO bool "Zynq GPIO driver" depends on DM_GPIO - default y if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL + default y if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL2 help Supports GPIO access on Zynq SoC. diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig index 47f24e0a02..67d5ac1a74 100644 --- a/drivers/mailbox/Kconfig +++ b/drivers/mailbox/Kconfig @@ -54,7 +54,7 @@ config K3_SEC_PROXY config ZYNQMP_IPI bool "Xilinx ZynqMP IPI controller support" - depends on DM_MAILBOX && (ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET) + depends on DM_MAILBOX && (ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2) help This enables support for the Xilinx ZynqMP Inter Processor Interrupt communication controller. diff --git a/env/Kconfig b/env/Kconfig index 9641abe371..451bab45ea 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -570,7 +570,7 @@ config ENV_OFFSET default 0xF0000 if ARCH_SUNXI default 0xE0000 if ARCH_ZYNQ default 0x1E00000 if ARCH_ZYNQMP - default 0x7F40000 if ARCH_VERSAL || ARCH_VERSAL_NET + default 0x7F40000 if ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2 default 0x0 if ARC default 0x140000 if ARCH_AT91 default 0x260000 if ARCH_OMAP2PLUS @@ -605,7 +605,7 @@ config ENV_SIZE default 0x10000 if ARCH_SUNXI default 0x8000 if ARCH_ROCKCHIP && ENV_IS_IN_MMC default 0x2000 if ARCH_ROCKCHIP && ENV_IS_IN_SPI_FLASH - default 0x8000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET + default 0x8000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2 default 0x4000 if ARC default 0x1f000 help @@ -615,7 +615,7 @@ config ENV_SECT_SIZE hex "Environment Sector-Size" depends on ENV_IS_IN_FLASH || ENV_IS_IN_SPI_FLASH default 0x2000 if ARCH_ROCKCHIP - default 0x40000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET + default 0x40000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2 default 0x20000 if ARCH_ZYNQ || ARCH_OMAP2PLUS || ARCH_AT91 default 0x20000 if MICROBLAZE && ENV_IS_IN_SPI_FLASH default 0x10000 if ARCH_SUNXI && ENV_IS_IN_SPI_FLASH diff --git a/include/configs/amd_versal2.h b/include/configs/amd_versal2.h new file mode 100644 index 0000000000..6a40bbdf3a --- /dev/null +++ b/include/configs/amd_versal2.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Configuration for AMD Versal Gen 2 + * Copyright (C) 2016 - 2022, Xilinx, Inc. + * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc. + * + * Michal Simek + * + * Based on Configuration for Xilinx ZynqMP + */ + +#ifndef __AMD_VERSAL2_H +#define __AMD_VERSAL2_H + +/* FIXME this is causing issue at least on IPP */ +/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0xF9000000 +#define GICR_BASE 0xF9060000 + +/* Serial setup */ +#define CFG_SYS_BAUDRATE_TABLE \ + { 4800, 9600, 19200, 38400, 57600, 115200 } + +#if defined(CONFIG_CMD_DFU) +#define DFU_DEFAULT_POLL_TIMEOUT 300 +#define DFU_ALT_INFO_RAM \ + "dfu_ram_info=" \ + "setenv dfu_alt_info " \ + "Image ram 80000 $kernel_size_r\\\\;" \ + "system.dtb ram $fdt_addr_r $fdt_size_r\0" \ + "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ + "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" + +#define DFU_ALT_INFO \ + DFU_ALT_INFO_RAM +#endif + +#if !defined(DFU_ALT_INFO) +# define DFU_ALT_INFO +#endif + +/* Ethernet driver */ +#if defined(CONFIG_ZYNQ_GEM) +# define PHY_ANEG_TIMEOUT 20000 +#endif + +#define ENV_MEM_LAYOUT_SETTINGS \ + "fdt_addr_r=0x40000000\0" \ + "fdt_size_r=0x400000\0" \ + "pxefile_addr_r=0x10000000\0" \ + "kernel_addr_r=0x18000000\0" \ + "kernel_size_r=0x10000000\0" \ + "kernel_comp_addr_r=0x30000000\0" \ + "kernel_comp_size=0x3C00000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + "script_size_f=0x80000\0" + +#if defined(CONFIG_DISTRO_DEFAULTS) + +#if defined(CONFIG_MMC_SDHCI_ZYNQ) +# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) +#else +# define BOOT_TARGET_DEVICES_MMC(func) +#endif + +#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP) +# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) +#else +# define BOOT_TARGET_DEVICES_PXE(func) +#endif + +#if defined(CONFIG_CMD_DHCP) +# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na) +#else +# define BOOT_TARGET_DEVICES_DHCP(func) +#endif + +#if defined(CONFIG_ZYNQMP_GQSPI) || defined(CONFIG_CADENCE_OSPI_VERSAL) +# define BOOT_TARGET_DEVICES_XSPI(func) func(XSPI, xspi, 0) func(XSPI, xspi, 1) +# define BOOTENV_DEV_SHARED_XSPI \ + "xspi_boot=sf probe $devnum_xspi:0 0 0 && " \ + "sf read $scriptaddr $script_offset_f $script_size_f && " \ + "echo XSPI: Trying to boot script at ${scriptaddr} && " \ + "source ${scriptaddr}; echo XSPI: SCRIPT FAILED: continuing...;\0" +#else +# define BOOT_TARGET_DEVICES_XSPI(func) +# define BOOTENV_DEV_SHARED_XSPI +#endif + +#define BOOTENV_DEV_XSPI(devtypeu, devtypel, instance) \ + "bootcmd_" #devtypel #instance "=" \ + "devnum_xspi=" #instance "; run " #devtypel "_boot\0" \ + +#define BOOTENV_DEV_NAME_XSPI(devtypeu, devtypel, instance) \ + "" + +#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na) + +#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \ + "bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \ + "source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \ + "jtag " + +#define BOOT_TARGET_DEVICES_DFU_USB(func) func(DFU_USB, dfu_usb, 0) + +#define BOOTENV_DEV_DFU_USB(devtypeu, devtypel, instance) \ + "bootcmd_dfu_usb=setenv dfu_alt_info boot.scr ram $scriptaddr " \ + "$script_size_f; dfu 0 ram 0 && " \ + "echo DFU: Trying to boot script at ${scriptaddr} && " \ + "source ${scriptaddr}; " \ + "echo DFU: SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_DFU_USB(devtypeu, devtypel, instance) \ + "" + +#define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICES_JTAG(func) \ + BOOT_TARGET_DEVICES_MMC(func) \ + BOOT_TARGET_DEVICES_XSPI(func) \ + BOOT_TARGET_DEVICES_DFU_USB(func) \ + BOOT_TARGET_DEVICES_PXE(func) \ + BOOT_TARGET_DEVICES_DHCP(func) + +#include + +#else /* CONFIG_DISTRO_DEFAULTS */ +# define BOOTENV +#endif /* CONFIG_DISTRO_DEFAULTS */ + +/* Initial environment variables */ +#ifndef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ + ENV_MEM_LAYOUT_SETTINGS \ + BOOTENV \ + BOOTENV_DEV_SHARED_XSPI \ + DFU_ALT_INFO +#endif + +#endif /* __AMD_VERSAL2_H */ -- 2.39.5