From 3efd925d701065bde609a622c3a011088c439237 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 19 Jul 2024 23:51:23 +0200 Subject: [PATCH] board: beagle: convert to CONFIG_DM_I2C Rework to remove use of legacy I2C API. Signed-off-by: Anatolij Gustschin Cc: Tom Rini --- board/beagle/beagle/beagle.c | 41 +++++++++++++++++++++------------- configs/omap3_beagle_defconfig | 2 +- include/configs/omap3_beagle.h | 3 --- 3 files changed, 26 insertions(+), 20 deletions(-) diff --git a/board/beagle/beagle/beagle.c b/board/beagle/beagle/beagle.c index ac2f89cf21..ae258817e9 100644 --- a/board/beagle/beagle/beagle.c +++ b/board/beagle/beagle/beagle.c @@ -41,7 +41,6 @@ #include "beagle.h" #include -#define TWL4030_I2C_BUS 0 #define EXPANSION_EEPROM_I2C_BUS 1 #define EXPANSION_EEPROM_I2C_ADDRESS 0x50 @@ -213,27 +212,37 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) */ static unsigned int get_expansion_id(void) { - i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS); + struct udevice *eeprom = NULL; + int ret; - /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */ - if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) { - i2c_set_bus_num(TWL4030_I2C_BUS); + ret = i2c_get_chip_for_busnum(EXPANSION_EEPROM_I2C_BUS, + EXPANSION_EEPROM_I2C_ADDRESS, 1, &eeprom); + if (ret) return BEAGLE_NO_EEPROM; - } /* read configuration data */ - i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, - sizeof(expansion_config)); + ret = dm_i2c_read(eeprom, 0, (uint8_t *)&expansion_config, + sizeof(expansion_config)); + if (ret != 0) { + /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */ + return BEAGLE_NO_EEPROM; + } - /* retry reading configuration data with 16bit addressing */ if ((expansion_config.device_vendor == 0xFFFFFF00) || (expansion_config.device_vendor == 0xFFFFFFFF)) { printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n"); - i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config, - sizeof(expansion_config)); } - i2c_set_bus_num(TWL4030_I2C_BUS); + /* retry reading configuration data with 16bit addressing */ + ret = i2c_get_chip_for_busnum(EXPANSION_EEPROM_I2C_BUS, + EXPANSION_EEPROM_I2C_ADDRESS, 2, &eeprom); + if (ret) + return BEAGLE_NO_EEPROM; + + ret = dm_i2c_read(eeprom, 0, (uint8_t *)&expansion_config, + sizeof(expansion_config)); + if (ret != 0) + return BEAGLE_NO_EEPROM; return expansion_config.device_vendor; } @@ -281,13 +290,13 @@ static void beagle_dvi_pup(void) #define GPIODATADIR1 (TWL4030_BASEADD_GPIO+3) #define GPIODATAOUT1 (TWL4030_BASEADD_GPIO+6) - i2c_read(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1); + twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, GPIODATADIR1, &val); val |= 4; - i2c_write(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, GPIODATADIR1, val); - i2c_read(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1); + twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, GPIODATAOUT1, &val); val |= 4; - i2c_write(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, GPIODATAOUT1, val); break; } } diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index 8a709243a9..f76709389c 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -61,7 +61,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x82000000 -CONFIG_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index af7cb3513f..b616dd2608 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -28,9 +28,6 @@ /* NAND: SPL falcon mode configs */ #endif /* CONFIG_MTD_RAW_NAND */ -/* Enable Multi Bus support for I2C */ -#define CFG_I2C_MULTI_BUS - /* DSS Support */ /* TWL4030 LED Support */ -- 2.39.5