From 3499dd033c6fe5a302675a245759654f91534f52 Mon Sep 17 00:00:00 2001 From: Alex Marginean Date: Wed, 27 Nov 2019 17:19:32 +0200 Subject: [PATCH] ls1028a: Configure stream IDs for integrated PCI and fix up Linux DT Hardware comes out of reset with implicit values, but these are outside the accepted range for Layerscape gen 3 chassis spec used on LS1028A. Allocate different IDs and fix up Linux DT to use them. Signed-off-by: Alex Marginean Reviewed-by: Bin Meng Tested-by: Michael Walle Reviewed-by: Priyanka Jain --- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 9 ++ arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 9 ++ .../arm/cpu/armv8/fsl-layerscape/ls1028_ids.c | 93 +++++++++++++++++++ .../asm/arch-fsl-layerscape/stream_id_lsch3.h | 8 ++ 4 files changed, 119 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 6c87c1b11a..639f531649 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -1101,6 +1101,12 @@ static void config_core_prefetch(void) } } +#ifdef CONFIG_PCIE_ECAM_GENERIC +__weak void set_ecam_icids(void) +{ +} +#endif + int arch_early_init_r(void) { #ifdef CONFIG_SYS_FSL_ERRATUM_A009635 @@ -1152,6 +1158,9 @@ int arch_early_init_r(void) #endif #ifdef CONFIG_SYS_DPAA_QBMAN setup_qbman_portals(); +#endif +#ifdef CONFIG_PCIE_ECAM_GENERIC + set_ecam_icids(); #endif return 0; } diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index e993209593..1e7e46e88a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -421,6 +421,12 @@ static void fdt_disable_multimedia(void *blob, unsigned int svr) } #endif +#ifdef CONFIG_PCIE_ECAM_GENERIC +__weak void fdt_fixup_ecam(void *blob) +{ +} +#endif + void ft_cpu_setup(void *blob, bd_t *bd) { struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); @@ -485,4 +491,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_ARCH_LS1028A fdt_disable_multimedia(blob, svr); #endif +#ifdef CONFIG_PCIE_ECAM_GENERIC + fdt_fixup_ecam(blob); +#endif } diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c index 9462298fbf..8110412da6 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c @@ -33,3 +33,96 @@ struct icid_id_table icid_tbl[] = { }; int icid_tbl_sz = ARRAY_SIZE(icid_tbl); + +/* integrated PCI is handled separately as it's not part of CCSR/SCFG */ +#ifdef CONFIG_PCIE_ECAM_GENERIC + +#define ECAM_IERB_BASE 0x1f0800000ULL +#define ECAM_IERB_OFFSET_NA -1 +#define ECAM_IERB_FUNC_CNT ARRAY_SIZE(ierb_offset) +/* cache related transaction attributes for PCIe functions */ +#define ECAM_IERB_MSICAR (ECAM_IERB_BASE + 0xa400) +#define ECAM_IERB_MSICAR_VALUE 0x30 + +/* offset of IERB config register per PCI function */ +static int ierb_offset[] = { + 0x0800, + 0x1800, + 0x2800, + 0x3800, + 0x4800, + 0x5800, + 0x6800, + ECAM_IERB_OFFSET_NA, + 0x0804, + 0x0808, + 0x1804, + 0x1808, +}; + +/* + * Use a custom function for LS1028A, for now this is the only SoC with IERB + * and we're currently considering reorganizing IERB for future SoCs. + */ +void set_ecam_icids(void) +{ + int i; + + out_le32(ECAM_IERB_MSICAR, ECAM_IERB_MSICAR_VALUE); + + for (i = 0; i < ECAM_IERB_FUNC_CNT; i++) { + if (ierb_offset[i] == ECAM_IERB_OFFSET_NA) + continue; + + out_le32(ECAM_IERB_BASE + ierb_offset[i], + FSL_ECAM_STREAM_ID_START + i); + } +} + +static int fdt_setprop_inplace_idx_u32(void *fdt, int nodeoffset, + const char *name, uint32_t idx, u32 val) +{ + val = cpu_to_be32(val); + return fdt_setprop_inplace_namelen_partial(fdt, nodeoffset, name, + strlen(name), + idx * sizeof(val), &val, + sizeof(val)); +} + +static int fdt_getprop_len(void *fdt, int nodeoffset, const char *name) +{ + int len; + + if (fdt_getprop_namelen(fdt, nodeoffset, name, strlen(name), &len)) + return len; + + return 0; +} + +void fdt_fixup_ecam(void *blob) +{ + int off; + + off = fdt_node_offset_by_compatible(blob, 0, "pci-host-ecam-generic"); + if (off < 0) { + debug("ECAM node not found\n"); + return; + } + + if (fdt_getprop_len(blob, off, "msi-map") != 16 || + fdt_getprop_len(blob, off, "iommu-map") != 16) { + log_err("invalid msi/iommu-map propertly size in ECAM node\n"); + return; + } + + fdt_setprop_inplace_idx_u32(blob, off, "msi-map", 2, + FSL_ECAM_STREAM_ID_START); + fdt_setprop_inplace_idx_u32(blob, off, "msi-map", 3, + ECAM_IERB_FUNC_CNT); + + fdt_setprop_inplace_idx_u32(blob, off, "iommu-map", 2, + FSL_ECAM_STREAM_ID_START); + fdt_setprop_inplace_idx_u32(blob, off, "iommu-map", 3, + ECAM_IERB_FUNC_CNT); +} +#endif /* CONFIG_PCIE_ECAM_GENERIC */ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h index 94ea99a349..01d362d183 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h @@ -42,6 +42,10 @@ * -the MC is responsible for allocating and setting up 'isolation context * IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices. * + * - ECAM (integrated PCI) + * - U-Boot applies the value here to HW and does DT fix-up for both + * 'iommu-map' and 'msi-map' + * * On Chasis-3 SoCs stream IDs are programmed in AMQ registers (32-bits) for * each of the different bus masters. The relationship between * the AMQ registers and stream IDs is defined in the table below: @@ -98,6 +102,10 @@ #define FSL_DPAA2_STREAM_ID_START 23 #define FSL_DPAA2_STREAM_ID_END 63 +/* PCI IEPs, this overlaps DPAA2 but these two are exclusive at least for now */ +#define FSL_ECAM_STREAM_ID_START 32 +#define FSL_ECAM_STREAM_ID_END 63 + #define FSL_SEC_STREAM_ID 64 #define FSL_SEC_JR1_STREAM_ID 65 #define FSL_SEC_JR2_STREAM_ID 66 -- 2.39.5