From 32f8a88a8c931787e247019f52da4aec972f9f5a Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Tue, 30 Apr 2024 15:30:10 +0000 Subject: [PATCH] rockchip: rk3399-puma: Use common bss and stack addresses The rk3399-puma board is currently using SPL stack and bss addr in SRAM, the same addr typically used by TPL, this differs from most other RK3399 boards. Switch to use the common bss and stack addresses introduced in commit 008ba0d56d00 ("rockchip: Add common default bss and stack addresses"). Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- configs/puma-rk3399_defconfig | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index ec7d52a6e1..bd4926cf0f 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -2,11 +2,8 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_SIZE=0x3000 CONFIG_ENV_OFFSET=0x3F8000 @@ -16,12 +13,6 @@ CONFIG_ROCKCHIP_RK3399=y CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0 CONFIG_ROCKCHIP_SPI_IMAGE=y CONFIG_TARGET_PUMA_RK3399=y -CONFIG_SPL_STACK=0xff8effff -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0xff8e0000 -CONFIG_SPL_BSS_MAX_SIZE=0x10000 -CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_DEBUG_UART_BASE=0xFF180000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -33,7 +24,6 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x2e000 CONFIG_SPL_PAD_TO=0x38000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y -- 2.39.5