From 308520b8f2b11b3427fe8a02171839992bc85da6 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:31 -0500 Subject: [PATCH] global: Remove unused CONFIG symbols This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini --- README | 11 ----------- arch/arm/include/asm/arch-ls102xa/config.h | 1 - arch/arm/mach-mvebu/include/mach/config.h | 9 --------- arch/powerpc/include/asm/config_mpc85xx.h | 1 - arch/xtensa/include/asm/config.h | 1 - board/Marvell/openrd/openrd.c | 2 +- drivers/net/mvgbe.c | 4 ---- drivers/net/mvgbe.h | 7 ------- drivers/ram/mpc83xx_sdram.c | 7 +------ include/configs/MPC837XERDB.h | 8 +++----- include/configs/P1010RDB.h | 1 - include/configs/P2041RDB.h | 9 ++------- include/configs/SBx81LIFKW.h | 9 --------- include/configs/SBx81LIFXCAT.h | 9 --------- include/configs/T102xRDB.h | 2 -- include/configs/T104xRDB.h | 4 ---- include/configs/T208xQDS.h | 2 -- include/configs/T208xRDB.h | 2 -- include/configs/T4240RDB.h | 3 --- include/configs/alt.h | 3 --- include/configs/ax25-ae350.h | 3 --- include/configs/beaver.h | 4 ---- include/configs/blanche.h | 4 +--- include/configs/cardhu.h | 4 ---- include/configs/cei-tk1-som.h | 3 --- include/configs/colibri_vf.h | 4 ---- include/configs/dalmore.h | 3 --- include/configs/dns325.h | 7 ------- include/configs/dockstar.h | 6 ------ include/configs/dra7xx_evm.h | 1 - include/configs/dreamplug.h | 6 ------ include/configs/ds109.h | 8 -------- include/configs/eb_cpu5282.h | 8 -------- include/configs/efi-x86_app.h | 2 -- include/configs/embestmx6boards.h | 6 +++--- include/configs/ethernut5.h | 1 - include/configs/exynos5-common.h | 2 -- include/configs/exynos5420-common.h | 2 -- include/configs/exynos7420-common.h | 4 ---- include/configs/goflexhome.h | 6 ------ include/configs/guruplug.h | 8 -------- include/configs/ib62x0.h | 8 -------- include/configs/iconnect.h | 10 ---------- include/configs/jetson-tk1.h | 5 ----- include/configs/k2e_evm.h | 1 - include/configs/k2g_evm.h | 1 - include/configs/k2l_evm.h | 1 - include/configs/kmcent2.h | 1 - include/configs/kontron_sl28.h | 1 - include/configs/lacie_kw.h | 7 ------- include/configs/legoev3.h | 1 - include/configs/ls1028a_common.h | 1 - include/configs/ls1043a_common.h | 1 - include/configs/ls1043aqds.h | 1 - include/configs/ls1043ardb.h | 1 - include/configs/ls1046a_common.h | 1 - include/configs/ls1046afrwy.h | 1 - include/configs/ls1046aqds.h | 1 - include/configs/ls1046ardb.h | 1 - include/configs/ls1088a_common.h | 1 - include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h | 1 - include/configs/ls2080a_common.h | 1 - include/configs/ls2080aqds.h | 1 - include/configs/ls2080ardb.h | 1 - include/configs/lx2160a_common.h | 1 - include/configs/malta.h | 2 -- include/configs/mt7621.h | 1 - include/configs/mt7629.h | 5 +---- include/configs/mxs.h | 5 ----- include/configs/nas220.h | 12 ------------ include/configs/nsa310s.h | 4 ---- include/configs/nyan-big.h | 3 --- include/configs/openrd.h | 22 ---------------------- include/configs/origen.h | 6 ------ include/configs/p2371-0000.h | 3 --- include/configs/p2371-2180.h | 3 --- include/configs/p2571.h | 3 --- include/configs/p3450-0000.h | 3 --- include/configs/pm9263.h | 5 ----- include/configs/pogo_e02.h | 6 ------ include/configs/pogo_v4.h | 6 ------ include/configs/porter.h | 3 --- include/configs/qemu-ppce500.h | 1 - include/configs/rcar-gen3-common.h | 1 - include/configs/rk3399_common.h | 10 ---------- include/configs/sheevaplug.h | 6 ------ include/configs/silk.h | 3 --- include/configs/smdk5420.h | 2 -- include/configs/smdkv310.h | 3 --- include/configs/socfpga_sr1500.h | 6 ------ include/configs/socrates.h | 4 ---- include/configs/stout.h | 3 --- include/configs/synquacer.h | 1 - include/configs/tec-ng.h | 6 ------ include/configs/venice2.h | 3 --- include/configs/vinco.h | 3 --- include/configs/x86-common.h | 16 ---------------- include/configs/xpress.h | 7 ++----- 99 files changed, 14 insertions(+), 391 deletions(-) diff --git a/README b/README index 1209633176..9e2627863c 100644 --- a/README +++ b/README @@ -373,12 +373,6 @@ The following options need to be configured: such as ARM architectural timer initialization. - Linux Kernel Interface: - CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] - - When transferring memsize parameter to Linux, some versions - expect it to be in bytes, others in MB. - Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. - CONFIG_OF_LIBFDT New kernel versions are expecting firmware settings to be @@ -585,11 +579,6 @@ The following options need to be configured: Support for generic parallel port TPM devices. Only one device per system is supported at this time. - CONFIG_TPM_TIS_BASE_ADDRESS - Base address where the generic TPM device is mapped - to. Contemporary x86 systems usually map it at - 0xfed40000. - CONFIG_TPM Define this to enable the TPM support library which provides functional interfaces to some TPM commands. diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 14f86df5ed..4a4d642441 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -70,7 +70,6 @@ /* SATA */ #define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000) #ifdef CONFIG_DDR_SPD -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) #endif diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index 2e06f2bdae..96a08104ff 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -30,13 +30,4 @@ /* Needed for SPI NOR booting in SPL */ #define CONFIG_DM_SEQ_ALIAS 1 -/* - * I2C related stuff - */ -#ifdef CONFIG_CMD_I2C -#ifndef CONFIG_SYS_I2C_SOFT -#define CONFIG_I2C_MVTWSI -#endif -#endif - #endif /* __MVEBU_CONFIG_H */ diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index edaf8baaae..e805991060 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -133,7 +133,6 @@ #define CFG_SYS_FM_MURAM_SIZE 0x60000 #ifdef CONFIG_ARCH_B4860 -#define CONFIG_NUM_DSP_CPUS 6 #define CFG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 } #define CFG_SYS_NUM_FM1_DTSEC 6 #define CFG_SYS_NUM_FM1_10GEC 2 diff --git a/arch/xtensa/include/asm/config.h b/arch/xtensa/include/asm/config.h index a1096ab196..21b334b938 100644 --- a/arch/xtensa/include/asm/config.h +++ b/arch/xtensa/include/asm/config.h @@ -14,7 +14,6 @@ * restricting used physical memory to the first 128MB. */ #if XCHAL_HAVE_PTP_MMU -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED (128 << 20) #endif diff --git a/board/Marvell/openrd/openrd.c b/board/Marvell/openrd/openrd.c index f44ac3315e..581e2e084d 100644 --- a/board/Marvell/openrd/openrd.c +++ b/board/Marvell/openrd/openrd.c @@ -140,7 +140,7 @@ void mv_phy_init(char *name) /* reset the phy */ miiphy_reset(name, devadr); - printf(PHY_NO" Initialized on %s\n", name); + printf("Initialized on %s\n", name); } void reset_phy(void) diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index 58363fce05..3587ca2124 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -37,10 +37,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_MVGBE_PORTS -# define CONFIG_MVGBE_PORTS {0, 0} -#endif - #define MV_PHY_ADR_REQUEST 0xee #define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi) #define MVGBE_PGADR_REG 22 diff --git a/drivers/net/mvgbe.h b/drivers/net/mvgbe.h index e3f5ac0639..6514ab67ba 100644 --- a/drivers/net/mvgbe.h +++ b/drivers/net/mvgbe.h @@ -11,13 +11,6 @@ #ifndef __MVGBE_H__ #define __MVGBE_H__ -/* PHY_BASE_ADR is board specific and can be configured */ -#if defined (CONFIG_PHY_BASE_ADR) -#define PHY_BASE_ADR CONFIG_PHY_BASE_ADR -#else -#define PHY_BASE_ADR 0x08 /* default phy base addr */ -#endif - /* Constants */ #define INT_CAUSE_UNMASK_ALL 0x0007ffff #define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff diff --git a/drivers/ram/mpc83xx_sdram.c b/drivers/ram/mpc83xx_sdram.c index a53ff93a6b..11676d4fae 100644 --- a/drivers/ram/mpc83xx_sdram.c +++ b/drivers/ram/mpc83xx_sdram.c @@ -118,12 +118,7 @@ int dram_init(void) phys_size_t get_effective_memsize(void) { - if (!IS_ENABLED(CONFIG_VERY_BIG_RAM)) - return gd->ram_size; - - /* Limit stack to what we can reasonable map */ - return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? - CONFIG_MAX_MEM_MAPPED : gd->ram_size); + return gd->ram_size; } /** diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 7dff3cc691..7b932eb389 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -195,12 +195,10 @@ * Environment Configuration */ -#define CONFIG_NETDEV "eth1" - -#define CONFIG_FDTFILE "mpc8379_rdb.dtb" +#define FDTFILE "mpc8379_rdb.dtb" #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" CONFIG_NETDEV "\0" \ + "netdev=eth1\0" \ "uboot=" CONFIG_UBOOTPATH "\0" \ "tftpflash=tftp $loadaddr $uboot;" \ "protect off " __stringify(CONFIG_TEXT_BASE) \ @@ -214,7 +212,7 @@ "cmp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) \ " $filesize\0" \ "fdtaddr=780000\0" \ - "fdtfile=" CONFIG_FDTFILE "\0" \ + "fdtfile=" FDTFILE "\0" \ "ramdiskaddr=1000000\0" \ "ramdiskfile=rootfs.ext2.gz.uboot\0" \ "console=ttyS0\0" \ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index d83563d618..02d49c3d34 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -24,7 +24,6 @@ #ifdef CONFIG_SPIFLASH #ifdef CONFIG_NXP_ESBC -#define CONFIG_RAMBOOT_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #else #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 0f0cdb3a68..1a157a7da0 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -12,7 +12,6 @@ #define __CONFIG_H #ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #endif @@ -46,10 +45,9 @@ /* * Config the L3 Cache as L3 SRAM */ -#define CFG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#define CFG_SYS_INIT_L3_ADDR CONFIG_TEXT_BASE #ifdef CONFIG_PHYS_64BIT -#define CFG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ - CONFIG_RAMBOOT_TEXT_BASE) +#define CFG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_TEXT_BASE) #else #define CFG_SYS_INIT_L3_ADDR_PHYS CFG_SYS_INIT_L3_ADDR #endif @@ -62,7 +60,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -88,7 +85,6 @@ #define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif -#define CONFIG_FSL_CPLD #define CPLD_BASE 0xffdf0000 /* CPLD registers */ #ifdef CONFIG_PHYS_64BIT #define CPLD_BASE_PHYS 0xfffdf0000ull @@ -131,7 +127,6 @@ #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS + 0x8000000} /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ #ifdef CONFIG_PHYS_64BIT #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index d5c9c05767..19ae639947 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -36,14 +36,5 @@ /* size in bytes reserved for initial data */ #include -/* There is no PHY directly connected so don't ask it for link status */ - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ -#define CONFIG_PHY_BASE_ADR 0x01 -#endif /* CONFIG_CMD_NET */ #endif /* _CONFIG_SBX81LIFKW_H */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 23d37394e0..bdbf9d4758 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -41,14 +41,5 @@ /* size in bytes reserved for initial data */ #include -/* There is no PHY directly connected so don't ask it for link status */ - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ -#define CONFIG_PHY_BASE_ADR 0x01 -#endif /* CONFIG_CMD_NET */ #endif /* _CONFIG_SBX81LIFXCAT_H */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index e815d9f81a..4b443c7504 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -112,7 +112,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #if defined(CONFIG_TARGET_T1024RDB) @@ -269,7 +268,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #ifdef CONFIG_PHYS_64BIT #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 6fe0bd6828..dfad76e16f 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -86,7 +86,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -247,7 +246,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 @@ -285,8 +283,6 @@ */ #define CFG_SYS_I2C_RTC_ADDR 0x68 -/*DVI encoder*/ -#define CONFIG_HDMI_ENCODER_I2C_ADDR 0x75 #endif /* diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 79b3d7af4e..24c1daf998 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -78,7 +78,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ @@ -245,7 +244,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 2a32fe37aa..c825e7fa0c 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -78,7 +78,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ @@ -210,7 +209,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index d8c4de5b3d..95735f3fcb 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -16,7 +16,6 @@ #ifdef CONFIG_RAMBOOT_PBL #ifndef CONFIG_SDCARD -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #else #define RESET_VECTOR_OFFSET 0x27FFC @@ -60,7 +59,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -71,7 +69,6 @@ #define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 diff --git a/include/configs/alt.h b/include/configs/alt.h index fe303fda78..f277400169 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -20,9 +20,6 @@ #define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) -/* FLASH */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h index 03e04e6e68..d70f038230 100644 --- a/include/configs/ax25-ae350.h +++ b/include/configs/ax25-ae350.h @@ -49,9 +49,6 @@ */ #define CFG_SYS_FLASH_BANKS_SIZES {0x4000000} -/* max number of sectors on one chip */ -#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) - /* environments */ /* SPI FLASH */ diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 6b5f650811..7078c2745c 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -20,10 +20,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SPI */ -#define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/blanche.h b/include/configs/blanche.h index fe09997e17..d4e0f677e6 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -22,9 +22,7 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* FLASH */ -#if !defined(CONFIG_MTD_NOR_FLASH) -#define CONFIG_SH_QSPI_BASE 0xE6B10000 -#else +#if defined(CONFIG_MTD_NOR_FLASH) #define CFG_SYS_FLASH_BASE 0x00000000 #define CFG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ #define CFG_SYS_FLASH_BANKS_LIST { (CFG_SYS_FLASH_BASE) } diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 35c5a4f122..5cca1e1834 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -24,10 +24,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SPI */ -#define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h index 55e2d744c4..e3519ed751 100644 --- a/include/configs/cei-tk1-som.h +++ b/include/configs/cei-tk1-som.h @@ -22,9 +22,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 8a790400b4..e8918df69e 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -14,10 +14,6 @@ #include #include -/* NAND support */ - -#define CONFIG_FDTADDR 0x84000000 - #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x82000000\0" \ diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 24cf554649..82b2efdfe8 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -19,9 +19,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 015bc78648..1bfb741346 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -16,13 +16,6 @@ /* Remove or override few declarations from mv-common.h */ -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#endif - /* * Enable GPI0 support */ diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 33ae7d654b..a6c1e9c6d0 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -28,10 +28,4 @@ "initrd=/boot/uInitrd\0" \ "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_DOCKSTAR_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index b8f518612e..f8afcc7826 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -13,7 +13,6 @@ #include -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED 0x80000000 #ifndef CONFIG_QSPI_BOOT diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index fbd83d629c..98322a54f6 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -24,10 +24,4 @@ "x_bootargs=console=ttyS0,115200\0" \ "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_DREAMPLUG_H */ diff --git a/include/configs/ds109.h b/include/configs/ds109.h index 8553ea0b95..8e7a86e062 100644 --- a/include/configs/ds109.h +++ b/include/configs/ds109.h @@ -35,12 +35,4 @@ "ipaddr=192.168.1.5\0" \ "usb0Mode=host\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ -#define CONFIG_PHY_BASE_ADR 8 -#endif /* CONFIG_CMD_NET */ - #endif /* _CONFIG_DS109_H */ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 717f49ca29..029f13dad3 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -144,13 +144,5 @@ #define CFG_SYS_DDRUA 0x05 #define CFG_SYS_PJPAR 0xFF -/*----------------------------------------------------------------------- - * I2C - */ - -#ifdef CONFIG_CMD_DATE -#define CONFIG_I2C_RTC_ADDR 0x68 -#endif - #endif /* _CONFIG_M5282EVB_H */ /*---------------------------------------------------------------------*/ diff --git a/include/configs/efi-x86_app.h b/include/configs/efi-x86_app.h index 6061a6db0a..17a7851402 100644 --- a/include/configs/efi-x86_app.h +++ b/include/configs/efi-x86_app.h @@ -8,8 +8,6 @@ #include -#undef CONFIG_TPM_TIS_BASE_ADDRESS - #define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=vidconsole\0" \ "stderr=vidconsole\0" diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 22e0fa5aab..1742b1192f 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -35,11 +35,11 @@ #if defined(CONFIG_ENV_IS_IN_MMC) /* RiOTboard */ -#define CONFIG_FDTFILE "imx6dl-riotboard.dtb" +#define FDTFILE "imx6dl-riotboard.dtb" #define CFG_SYS_FSL_USDHC_NUM 3 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) /* MarSBoard */ -#define CONFIG_FDTFILE "imx6q-marsboard.dtb" +#define FDTFILE "imx6q-marsboard.dtb" #define CFG_SYS_FSL_USDHC_NUM 2 #endif @@ -79,7 +79,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ - "fdtfile=" CONFIG_FDTFILE "\0" \ + "fdtfile=" FDTFILE "\0" \ "finduuid=part uuid mmc 0:1 uuid\0" \ BOOTENV diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 52eb0be676..3fd58d6bd4 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -49,7 +49,6 @@ /* Ethernet */ #define CONFIG_PHY_ID 0 -#define CONFIG_MACB_SEARCH_PHY /* MMC */ #ifdef CONFIG_CMD_MMC diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 9b5c329bda..8e277ce7ff 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -27,8 +27,6 @@ /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 -#define CONFIG_RD_LVL - #define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_2 (CFG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index 7a9307ccc3..934a4ef9d1 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -8,8 +8,6 @@ #ifndef __CONFIG_EXYNOS5420_H #define __CONFIG_EXYNOS5420_H -#define CONFIG_VAR_SIZE_SPL - #define CONFIG_IRAM_TOP 0x02074000 #define CONFIG_PHY_IRAM_BASE 0x02020000 diff --git a/include/configs/exynos7420-common.h b/include/configs/exynos7420-common.h index cff910c1bd..e22dd036cc 100644 --- a/include/configs/exynos7420-common.h +++ b/include/configs/exynos7420-common.h @@ -15,10 +15,6 @@ /* select serial console configuration */ -/* IRAM Layout */ -#define CONFIG_IRAM_BASE 0x02100000 -#define CONFIG_IRAM_SIZE 0x58000 -#define CONFIG_IRAM_END (CONFIG_IRAM_BASE + CONFIG_IRAM_SIZE) #define CPU_RELEASE_ADDR secondary_boot_addr /* select serial console configuration */ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 66eed9e14f..1c86dcb1f6 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -36,10 +36,4 @@ "kernel=/boot/uImage\0" \ "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_GOFLEXHOME_H */ diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 4954c5ca08..d196c4eda5 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -30,12 +30,4 @@ "fdt=/boot/guruplug-server-plus.dtb\0" \ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -#define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - #endif /* _CONFIG_GURUPLUG_H */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 05192218d2..76fc4ac8b6 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -24,14 +24,6 @@ "fdt=/boot/ib62x0.dtb\0" \ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" -/* - * Ethernet driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - /* * SATA driver configuration */ diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index f2e3608d3a..6d2104b3a1 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -16,14 +16,4 @@ "kernel=/boot/uImage\0" \ "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" -/* - * Ethernet driver configuration - * - * This board has PCIe Wifi card, so allow Ethernet to be disabled - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 11 -#endif /* CONFIG_CMD_NET */ - #endif /* _CONFIG_ICONNECT_H */ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index b846889541..ea4964b13d 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -18,11 +18,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* Environment in eMMC, at the end of 2nd "boot sector" */ - -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index bbc58be511..174a91c83e 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -39,6 +39,5 @@ /* Network */ #define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 9 -#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE #endif /* __CONFIG_K2E_EVM_H */ diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index bb91751d5d..dc06d5943e 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -53,7 +53,6 @@ /* Network */ #define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 2 -#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE #define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */ #define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index a18158a7eb..5d629452ba 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -39,6 +39,5 @@ /* Network */ #define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 5 -#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE #endif /* __CONFIG_K2L_EVM_H */ diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 532370e918..80bff4b893 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -149,7 +149,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 9c3174d0e0..f7bb97aa0e 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -18,7 +18,6 @@ /* DDR */ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 828f910963..7a66df548a 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -14,13 +14,6 @@ * Enable platform initialisation via misc_init_r() function */ -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#endif - /* * Enable GPI0 support */ diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index abe470fe89..794c1fcbed 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -48,7 +48,6 @@ * Linux Information */ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_SETUP_INITRD_TAG #define CONFIG_EXTRA_ENV_SETTINGS \ "bootenvfile=uEnv.txt\0" \ "fdtfile=da850-lego-ev3.dtb\0" \ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index b190bfe9c8..2ccb20192d 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -12,7 +12,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e54e903a8a..d0380b3373 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -31,7 +31,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index dab57382ed..1dca7f0aa6 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -107,7 +107,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #endif #ifdef CONFIG_NAND_BOOT diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 12c4853ea9..043904197f 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -82,7 +82,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_SIZE (1024 << 10) diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 4ed5481c3e..250891e9e3 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -31,7 +31,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index 1759d25f3a..5e03a962d1 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -45,7 +45,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE /* IFC Timing Params */ #define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index e9b8ad0c0b..c4e5f4928d 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -123,7 +123,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #endif #ifdef CONFIG_NAND_BOOT diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index f3904e7b3f..ad766b034b 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -50,7 +50,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE /* * CPLD diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 57429d4bbe..bcba8d81c0 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -29,7 +29,6 @@ /* Link Definitions */ #define CFG_SYS_FSL_QSPI_BASE 0x20000000 -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index dc9cded49f..49ad146926 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -97,7 +97,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 6 diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index e2444cd8eb..9033f6e937 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -81,7 +81,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_BRDCFG4_OFFSET 0x54 diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index e82456fd81..bd78bdb793 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -16,7 +16,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 4e6d40afbf..7d3e8912c3 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -98,7 +98,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 8f36958f71..4573906115 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -95,7 +95,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index a469c83fa4..3347920f03 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -13,7 +13,6 @@ #define CFG_SYS_FLASH_BASE 0x20000000 /* DDR */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL diff --git a/include/configs/malta.h b/include/configs/malta.h index 65f4b05649..8ba04b4e6c 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -11,8 +11,6 @@ */ #define CONFIG_MALTA -#define CONFIG_MEMSIZE_IN_BYTES - /* * CPU Configuration */ diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h index 7c8c67f446..b6e680bcc7 100644 --- a/include/configs/mt7621.h +++ b/include/configs/mt7621.h @@ -10,7 +10,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED 0x1c000000 #define CFG_SYS_INIT_SP_OFFSET 0x800000 diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h index 99b09ad41e..f6ab486fa2 100644 --- a/include/configs/mt7629.h +++ b/include/configs/mt7629.h @@ -15,10 +15,7 @@ /* Environment */ -/* Defines for SPL */ - -#define CONFIG_SPI_ADDR 0x30000000 -#define CFG_SYS_UBOOT_BASE (CONFIG_SPI_ADDR + CONFIG_SPL_PAD_TO) +#define CFG_SYS_UBOOT_BASE (0x30000000 + CONFIG_SPL_PAD_TO) /* SPL -> Uboot */ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 30f27e7f0c..32e0e06617 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -86,9 +86,4 @@ #define CFG_SYS_NAND_BASE 0x60000000 #endif -/* SPI */ -#ifdef CONFIG_CMD_SPI -#define CONFIG_SPI_HALF_DUPLEX -#endif - #endif /* __CONFIGS_MXS_H__ */ diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 1b7eb34334..85691ca94f 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -39,16 +39,4 @@ "bootargs=console=ttyS0,115200\0" \ "autostart=no\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 8 -#endif /* CONFIG_CMD_NET */ - -/* - * EFI partition - */ - #endif /* _CONFIG_NAS220_H */ diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index 62f0701180..e2ad77072c 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -46,8 +46,4 @@ #endif /* CONFIG_SPL_BUILD */ -/* Ethernet driver configuration */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 1 - #endif /* _CONFIG_NSA310S_H */ diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index baa452156e..21002f99dc 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -18,9 +18,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 006f06e6af..2cec20ca42 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -33,26 +33,4 @@ "x_bootcmd_usb=usb start\0" \ "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -# ifdef CONFIG_BOARD_IS_OPENRD_BASE -# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -# else -# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -# endif -# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE -# define CONFIG_PHY_BASE_ADR 0x0 -# define PHY_NO "88E1121" -# else -# define CONFIG_PHY_BASE_ADR 0x8 -# define PHY_NO "88E1116" -# endif -#endif /* CONFIG_CMD_NET */ - -/* - * SATA Driver configuration - */ - #endif /* _CONFIG_OPENRD_BASE_H */ diff --git a/include/configs/origen.h b/include/configs/origen.h index 6633d541a3..a608df44e8 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -38,10 +38,4 @@ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" -/* MIU (Memory Interleaving Unit) */ -#define CONFIG_MIU_2BIT_21_7_INTERLEAVED - -#define RESERVE_BLOCK_SIZE (512) -#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ - #endif /* __CONFIG_H */ diff --git a/include/configs/p2371-0000.h b/include/configs/p2371-0000.h index ecd0405d29..653b4c583a 100644 --- a/include/configs/p2371-0000.h +++ b/include/configs/p2371-0000.h @@ -19,9 +19,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* _P2371_0000_H */ diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index 7f942888e7..2913d5304b 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -19,9 +19,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* _P2371_2180_H */ diff --git a/include/configs/p2571.h b/include/configs/p2571.h index 50cddb4a4a..e78e3c4d6b 100644 --- a/include/configs/p2571.h +++ b/include/configs/p2571.h @@ -19,9 +19,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* _P2571_H */ diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h index ec1a8634e7..bab02dc2d6 100644 --- a/include/configs/p3450-0000.h +++ b/include/configs/p3450-0000.h @@ -23,9 +23,6 @@ func(PXE, pxe, na) \ func(DHCP, dhcp, na) -/* Environment at end of QSPI, in the VER partition */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #define BOARD_EXTRA_ENV_SETTINGS \ "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \ "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 9fd897958a..fa08744b6f 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -159,11 +159,6 @@ /* PSRAM */ #define PHYS_PSRAM 0x70000000 #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ -/* Slave EBI1, PSRAM connected */ -#define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \ - AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \ - AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \ - AT91_MATRIX_SCFG_SLOT_CYCLE(255)) /* USB */ #define CFG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index 085732214e..fc9f113dee 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -23,10 +23,4 @@ "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ "ext2load usb 0:1 0x01100000 /uInitrd\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_POGO_E02_H */ diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h index b5ce2dd13d..239d33d8e9 100644 --- a/include/configs/pogo_v4.h +++ b/include/configs/pogo_v4.h @@ -69,10 +69,4 @@ BOOTENV #endif /* CONFIG_SPL_BUILD */ -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_POGO_V4_H */ diff --git a/include/configs/porter.h b/include/configs/porter.h index 88fa65e0ff..e0f77f358b 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -21,9 +21,6 @@ #define RCAR_GEN2_SDRAM_SIZE (2048u * 1024 * 1024) #define RCAR_GEN2_UBOOT_SDRAM_SIZE (1024u * 1024 * 1024) -/* FLASH */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index d056189958..20be4af462 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -29,7 +29,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index e9cbd25382..86012adfb3 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -28,7 +28,6 @@ #define DRAM_RSV_SIZE 0x08000000 #define CFG_SYS_SDRAM_BASE (0x40000000 + DRAM_RSV_SIZE) #define CFG_SYS_SDRAM_SIZE (0x80000000u - DRAM_RSV_SIZE) -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE) /* ENV setting */ diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index e459581715..a721f27ec0 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -10,16 +10,6 @@ #define CONFIG_IRAM_BASE 0xff8c0000 -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT) -#else -/* BSS setup */ -#endif - -/* MMC/SD IP block */ -#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000 - -/* RAW SD card / eMMC locations. */ - /* FAT sd card locations. */ #define CFG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xf8000000 diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 19701ccce2..d7923967a7 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -21,10 +21,4 @@ "x_bootcmd_usb=usb start\0" \ "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/configs/silk.h b/include/configs/silk.h index 58613effaf..6d605edf78 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -21,9 +21,6 @@ #define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) -/* FLASH */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 0392530c0a..0cb70762d9 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -12,8 +12,6 @@ #include #include -#define CONFIG_SMDK5420 /* which is in a SMDK5420 */ - #define CFG_SYS_SDRAM_BASE 0x20000000 /* DRAM Memory Banks */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 601c16ea45..38de1fa984 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -34,9 +34,6 @@ /* FLASH and environment organization */ -#define RESERVE_BLOCK_SIZE (512) -#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ - /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_ENV_SROM_BANK 1 diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h index 432144cb40..caff0cf252 100644 --- a/include/configs/socfpga_sr1500.h +++ b/include/configs/socfpga_sr1500.h @@ -11,15 +11,9 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ /* Ethernet on SoC (EMAC) */ -#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII /* The PHY is autodetected, so no MII PHY address is needed here */ #define PHY_ANEG_TIMEOUT 8000 -/* Enable SPI NOR flash reset, needed for SPI booting */ -#define CONFIG_SPI_N25Q256A_RESET - -/* Environment setting for SPI flash */ - /* The rest of the configuration is shared */ #include diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 2a07671602..11d8402233 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -16,9 +16,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* High Level Configuration Options */ -#define CONFIG_SOCRATES 1 - /* * Only possible on E500 Version 2 or newer cores. */ @@ -55,7 +52,6 @@ #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x50 /* CTLR 0 DIMM 0 */ diff --git a/include/configs/stout.h b/include/configs/stout.h index f49e88cb17..977c0adc5f 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -25,9 +25,6 @@ /* SCIF */ #define CONFIG_SCIF_A -/* SPI */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 6992689001..a2b6a1f57d 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -14,7 +14,6 @@ #define CFG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */ #define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */ -#define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */ #define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE #define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */ diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index 0987966370..c98322cf08 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -16,12 +16,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* Environment in eMMC, at the end of 2nd "boot sector" */ - -/* SPI */ -#define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/venice2.h b/include/configs/venice2.h index b2dc04a975..a4eb4bf4aa 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -20,9 +20,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 9f72bdde81..1c1789ac3f 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -39,9 +39,6 @@ /* USB device */ -/* Ethernet Hardware */ -#define CONFIG_MACB_SEARCH_PHY - #ifdef CONFIG_SPI_BOOT /* bootstrap + u-boot + env + linux in serial flash */ /* Use our own mapping for the VInCo platform */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 9bf2462010..d71108dd31 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -10,22 +10,6 @@ #ifndef __CONFIG_X86_COMMON_H #define __CONFIG_X86_COMMON_H -/* - * High Level Configuration Options - * (easy to change) - */ - -/* Generic TPM interfaced through LPC bus */ -#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 - -/*----------------------------------------------------------------------- - * Serial Configuration - */ - -/* - * Miscellaneous configurable options - */ - /*----------------------------------------------------------------------- * CPU Features */ diff --git a/include/configs/xpress.h b/include/configs/xpress.h index 3e604894ad..9f1f2d90db 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -34,9 +34,6 @@ #define CONFIG_FEC_ENET_DEV 0 #define CONFIG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_UBOOT_SECTOR_START 0x2 -#define CONFIG_UBOOT_SECTOR_COUNT 0x3fe - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -75,8 +72,8 @@ "bootz; " \ "fi;\0" \ "uboot=ccv/u-boot.imx\0" \ - "uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \ - "uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \ + "uboot_start=0x2\0" \ + "uboot_size=0x3fe\0" \ "update_uboot=if tftp ${uboot}; then " \ "if itest ${filesize} > 0; then " \ "mmc dev 0 1;" \ -- 2.39.5