From 2169e29c5a1b2b9c0a898c99e93057b5a1fe0af8 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Thu, 15 Sep 2022 11:14:29 +0200 Subject: [PATCH] rockchip: puma-rk3399: migrate to TPL Depending on the toolchain used to compile the SPL for Puma RK3399-Q7 module, the board does not boot because the resulting binary is too big to fit in SRAM. Let's add a TPL so that there's no need to fiddle with or hack the defconfig to have a working bootloader. This follows what's been done for the majority of other RK3399-based boards. See the original commit for the first migrations: bdc00080111f "rockchip: rk3399: update defconfig for TPL" Unfortunately, the offset in SPI-NOR for U-Boot proper needs to be modified, since the move from SPL to TPL+SPL for idbloader.img (and the "only the first 2KB per 4KB blocks are written" "hack" for rkspi format) increased the size above 256KB. Let's move it to 512KB to, hopefully, be safe. Cc: Quentin Schulz Signed-off-by: Quentin Schulz Reviewed-by: Kever Yang --- arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi | 2 +- board/theobroma-systems/puma_rk3399/README | 8 ++++---- configs/puma-rk3399_defconfig | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi index 5dc345bbe8..27a792fe6d 100644 --- a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi +++ b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi @@ -14,7 +14,7 @@ / { config { - u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */ + u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */ u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */ u-boot,boot-led = "module_led"; diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README index 254c3bbe96..550bdfb1f4 100644 --- a/board/theobroma-systems/puma_rk3399/README +++ b/board/theobroma-systems/puma_rk3399/README @@ -51,13 +51,13 @@ The SPL image for SD-Card/eMMC is readily available in idbloader.img at the root of U-Boot after compilation. Creating an SPL image for SPI-NOR: - > tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader-spi.img + > tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader-spi.img Flash the image =============== -Copy the SPL to offset 32k for SD/eMMC, offset 0 for NOR-Flash and the FIT -image to offset 256k. +Copy the SPL to offset 32k and the FIT image to offset 256k for SD/eMMC. +Copy the SPL to offset 0 and the FIT image to offset 512k for NOR-Flash. SD-Card ------- @@ -98,4 +98,4 @@ help of the Rockchip loader binary. > ./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.25.114.bin > ./rkdeveloptool ef > ./rkdeveloptool wl 0 ../idbloader-spi.img - > ./rkdeveloptool wl 512 ../u-boot.itb + > ./rkdeveloptool wl 1024 ../u-boot.itb diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 8c153e66e0..50d7591d40 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -7,7 +7,6 @@ CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-haikou" -CONFIG_SPL_TEXT_BASE=0xff8c2000 CONFIG_ROCKCHIP_RK3399=y CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0 CONFIG_TARGET_PUMA_RK3399=y @@ -31,11 +30,12 @@ CONFIG_SPL_BSS_MAX_SIZE=0x10000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK=0xff8effff CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y +CONFIG_TPL=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y -- 2.39.5