From 1e46d0bc6e212fd0b64f7dc535f27d742cddb864 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 26 Feb 2019 09:36:07 -0300 Subject: [PATCH] mx6sabreauto: README: Adjust the binary name after DM conversion After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam Acked-by: Peng Fan --- board/freescale/mx6sabreauto/README | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README index e8c589b92a..4c0fda1a2d 100644 --- a/board/freescale/mx6sabreauto/README +++ b/board/freescale/mx6sabreauto/README @@ -9,15 +9,15 @@ $ make mx6sabreauto_defconfig $ make -This will generate the SPL and u-boot.img binaries. +This will generate the SPL and u-boot-dtb.img binaries. - Flash the SPL binary into the SD card: $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync -- Flash the u-boot.img binary into the SD card: +- Flash the u-boot-dtb.img binary into the SD card: -$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync Booting via Falcon mode ----------------------- @@ -32,15 +32,15 @@ $ make mx6sabreauto_defconfig $ make -This will generate the SPL image called SPL and the u-boot.img. +This will generate the SPL image called SPL and the u-boot-dtb.img. - Flash the SPL image into the SD card: $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync -- Flash the u-boot.img image into the SD card: +- Flash the u-boot-dtb.img image into the SD card: -$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 && sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 && sync Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there: -- 2.39.5