From 1afac8bd305033c9caf3118bb376ce04bacd6767 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Wed, 19 Jun 2024 14:13:39 -0700 Subject: [PATCH] board: gateworks: venice: add print for GPY111 PHY name Due to supply chain issues Venice boards use either a DP83867 or a GPY111 RGMII PHY. We already print an identifier for the DP83867 so add one for the GPY111 to better identify what PHY is on a board: Example: Net: GPY111 eth0: ethernet@30be0000 [PRIME] Net: DP83867 eth0: ethernet@30be0000 [PRIME] Signed-off-by: Tim Harvey --- board/gateworks/venice/venice.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c index 5b105d7659..3080ff20cb 100644 --- a/board/gateworks/venice/venice.c +++ b/board/gateworks/venice/venice.c @@ -75,6 +75,9 @@ int board_phy_config(struct phy_device *phydev) val |= 0xb << 8; /* LED2(Green;Link/Act): blink for TX/RX act */ phy_write(phydev, MDIO_DEVAD_NONE, 24, val); break; + case 0xd565a401: /* MaxLinear GPY111 */ + puts("GPY111 "); + break; } if (phydev->drv->config) -- 2.39.5