From 152498d580ad666d23d55603de2e77dd27a30adb Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Wed, 7 Sep 2022 13:42:23 +0200 Subject: [PATCH] ARM: dts: stm32mp: alignment with v6.0-rc3 Device tree alignment with Linux kernel v6.0-rc3: - ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx - ARM: dts: stm32: Add alternate pinmux for RCC pin - ARM: dts: stm32: Add alternate pinmux for DCMI pins - ARM: dts: stm32: Add alternate pinmux for SPI2 pins - ARM: dts: stm32: Fix SPI2 pinmux pin comments on stm32mp15 - ARM: dts: stm32: add optee reserved memory on stm32mp135f-dk - ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13 - ARM: dts: stm32: remove the IPCC "wakeup" IRQ on stm32mp151 Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- arch/arm/dts/stm32mp13-u-boot.dtsi | 10 +++-- arch/arm/dts/stm32mp131.dtsi | 28 ++++++------- arch/arm/dts/stm32mp135f-dk.dts | 4 +- arch/arm/dts/stm32mp15-pinctrl.dtsi | 64 ++++++++++++++++++++++++++--- arch/arm/dts/stm32mp151.dtsi | 7 ++-- arch/arm/dts/stm32mp15xx-dkx.dtsi | 8 ++++ 6 files changed, 91 insertions(+), 30 deletions(-) diff --git a/arch/arm/dts/stm32mp13-u-boot.dtsi b/arch/arm/dts/stm32mp13-u-boot.dtsi index 01552adb7c..47a43649bb 100644 --- a/arch/arm/dts/stm32mp13-u-boot.dtsi +++ b/arch/arm/dts/stm32mp13-u-boot.dtsi @@ -17,6 +17,12 @@ pinctrl0 = &pinctrl; }; + firmware { + optee { + u-boot,dm-pre-reloc; + }; + }; + /* need PSCI for sysreset during board_f */ psci { u-boot,dm-pre-proper; @@ -82,10 +88,6 @@ u-boot,dm-pre-reloc; }; -&optee { - u-boot,dm-pre-reloc; -}; - &pinctrl { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi index 84e16bb2f2..a1c6d0d00b 100644 --- a/arch/arm/dts/stm32mp131.dtsi +++ b/arch/arm/dts/stm32mp131.dtsi @@ -27,21 +27,8 @@ interrupt-parent = <&intc>; }; - scmi_sram: sram@2ffff000 { - compatible = "mmio-sram"; - reg = <0x2ffff000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2ffff000 0x1000>; - - scmi_shm: scmi_shm@0 { - compatible = "arm,scmi-shmem"; - reg = <0 0x80>; - }; - }; - firmware { - optee: optee { + optee { method = "smc"; compatible = "linaro,optee-tz"; }; @@ -151,6 +138,19 @@ interrupt-parent = <&intc>; ranges; + scmi_sram: sram@2ffff000 { + compatible = "mmio-sram"; + reg = <0x2ffff000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2ffff000 0x1000>; + + scmi_shm: scmi-sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0 0x80>; + }; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts index f436ffab99..e6b8ffd332 100644 --- a/arch/arm/dts/stm32mp135f-dk.dts +++ b/arch/arm/dts/stm32mp135f-dk.dts @@ -31,8 +31,8 @@ #size-cells = <1>; ranges; - optee@de000000 { - reg = <0xde000000 0x2000000>; + optee@dd000000 { + reg = <0xdd000000 0x3000000>; no-map; }; }; diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi index d3ed10335d..2cc9341d43 100644 --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -151,6 +151,43 @@ }; }; + dcmi_pins_c: dcmi-2 { + pins { + pinmux = ,/* DCMI_HSYNC */ + ,/* DCMI_VSYNC */ + ,/* DCMI_PIXCLK */ + ,/* DCMI_D0 */ + ,/* DCMI_D1 */ + ,/* DCMI_D2 */ + ,/* DCMI_D3 */ + ,/* DCMI_D4 */ + ,/* DCMI_D5 */ + ,/* DCMI_D6 */ + ,/* DCMI_D7 */ + ,/* DCMI_D8 */ + ;/* DCMI_D9 */ + bias-pull-up; + }; + }; + + dcmi_sleep_pins_c: dcmi-sleep-2 { + pins { + pinmux = ,/* DCMI_HSYNC */ + ,/* DCMI_VSYNC */ + ,/* DCMI_PIXCLK */ + ,/* DCMI_D0 */ + ,/* DCMI_D1 */ + ,/* DCMI_D2 */ + ,/* DCMI_D3 */ + ,/* DCMI_D4 */ + ,/* DCMI_D5 */ + ,/* DCMI_D6 */ + ,/* DCMI_D7 */ + ,/* DCMI_D8 */ + ;/* DCMI_D9 */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = , /* ETH_RGMII_CLK125 */ @@ -923,6 +960,21 @@ }; }; + mco1_pins_a: mco1-0 { + pins { + pinmux = ; /* MCO1 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + mco1_sleep_pins_a: mco1-sleep-0 { + pins { + pinmux = ; /* MCO1 */ + }; + }; + mco2_pins_a: mco2-0 { pins { pinmux = ; /* MCO2 */ @@ -1814,30 +1866,30 @@ spi2_pins_a: spi2-0 { pins1 { - pinmux = , /* SPI1_SCK */ - ; /* SPI1_MOSI */ + pinmux = , /* SPI2_SCK */ + ; /* SPI2_MOSI */ bias-disable; drive-push-pull; slew-rate = <1>; }; pins2 { - pinmux = ; /* SPI1_MISO */ + pinmux = ; /* SPI2_MISO */ bias-disable; }; }; spi2_pins_b: spi2-1 { pins1 { - pinmux = , /* SPI1_SCK */ - ; /* SPI1_MOSI */ + pinmux = , /* SPI2_SCK */ + ; /* SPI2_MOSI */ bias-disable; drive-push-pull; slew-rate = <1>; }; pins2 { - pinmux = ; /* SPI1_MISO */ + pinmux = ; /* SPI2_MISO */ bias-disable; }; }; diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi index 767a06ef68..f0fb022fc6 100644 --- a/arch/arm/dts/stm32mp151.dtsi +++ b/arch/arm/dts/stm32mp151.dtsi @@ -1143,10 +1143,9 @@ reg = <0x4c001000 0x400>; st,proc-id = <0>; interrupts-extended = - <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <&exti 61 1>; - interrupt-names = "rx", "tx", "wakeup"; + <&exti 61 1>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; clocks = <&rcc IPCC>; wakeup-source; status = "disabled"; diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi index 3d36cac9ed..5a045d7156 100644 --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -685,6 +685,14 @@ &usbh_ehci { phys = <&usbphyc_port0>; status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + /* onboard HUB */ + hub@1 { + compatible = "usb424,2514"; + reg = <1>; + vdd-supply = <&v3v3>; + }; }; &usbotg_hs { -- 2.39.5