From 13e28f4987dd514ddbda36915bd9b8996a2d328d Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 23 Jul 2022 13:05:07 -0400 Subject: [PATCH] configs: Remove a number of unreferenced CONFIG options. There are a large number of options under CONFIG_SYS (but some of these are elsewhere, spotted while cleaning CONFIG_SYS) that are never referenced, or only used slightly later in the config file. Remove or restructure these. Signed-off-by: Tom Rini --- doc/arch/m68k.rst | 2 -- include/configs/M5253DEMO.h | 3 --- include/configs/M5275EVB.h | 5 ----- include/configs/P2041RDB.h | 7 ------- include/configs/am3517_evm.h | 2 -- include/configs/astro_mcf5373l.h | 4 ---- include/configs/brppt1.h | 4 ---- include/configs/chiliboard.h | 6 ------ include/configs/cm_t335.h | 2 -- include/configs/cobra5272.h | 7 ------- include/configs/corenet_ds.h | 6 ------ include/configs/da850evm.h | 1 - include/configs/etamin.h | 1 - include/configs/ids8313.h | 7 ------- include/configs/km/km-powerpc.h | 3 --- include/configs/km/km_arm.h | 3 --- include/configs/ls1012aqds.h | 22 ---------------------- include/configs/ls2080aqds.h | 4 ---- include/configs/ls2080ardb.h | 4 ---- include/configs/mx6sabreauto.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/omap3_logic.h | 2 -- include/configs/qemu-ppce500.h | 2 -- include/configs/s5p4418_nanopi2.h | 3 +-- include/configs/siemens-am33x-common.h | 3 --- include/configs/vexpress_common.h | 6 +----- include/configs/xtfpga.h | 24 ++++-------------------- 28 files changed, 6 insertions(+), 130 deletions(-) diff --git a/doc/arch/m68k.rst b/doc/arch/m68k.rst index 698e288c44..87a51e5b7d 100644 --- a/doc/arch/m68k.rst +++ b/doc/arch/m68k.rst @@ -114,8 +114,6 @@ apply to one or more cpu for the ColdFire family: CONFIG_SYS_MBAR: defines the base address of the MCF5272 configuration registers -CONFIG_SYS_ENET_BD_BASE: - defines the base address of the FEC buffer descriptors CONFIG_SYS_SCR: defines the contents of the System Configuration Register CONFIG_SYS_SPR: diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 9f648342ea..75278f4dab 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -125,9 +125,6 @@ #define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ CF_CACR_DBWE) -/* Port configuration */ -#define CONFIG_SYS_FECI2C 0xF0 - #define CONFIG_SYS_CS0_BASE 0xFF800000 #define CONFIG_SYS_CS0_MASK 0x007F0021 #define CONFIG_SYS_CS0_CTRL 0x00001D80 diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 1fd51212d6..35ff267371 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -122,9 +122,4 @@ #define CONFIG_SYS_CS1_CTRL 0x00001900 #define CONFIG_SYS_CS1_MASK 0x00070001 -/*----------------------------------------------------------------------- - * Port configuration - */ -#define CONFIG_SYS_FECI2C 0x0FA0 - #endif /* _M5275EVB_H */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 69a5df61b1..de5f42b101 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -100,13 +100,6 @@ #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE #endif -#define CONFIG_SYS_FLASH_BR_PRELIM \ - (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \ - BR_PS_16 | BR_V) -#define CONFIG_SYS_FLASH_OR_PRELIM \ - ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ - | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) - #define CONFIG_FSL_CPLD #define CPLD_BASE 0xffdf0000 /* CPLD registers */ #ifdef CONFIG_PHYS_64BIT diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 02a5e94c4f..2dc6bd2f2c 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -95,6 +95,4 @@ #define CONFIG_SYS_FLASH_BASE NAND_BASE #endif -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - #endif /* __CONFIG_H */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 6691b88480..adfadd7c6d 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -62,9 +62,6 @@ #define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3) #define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ -#define CONFIG_SYS_CORE_SRAM_SIZE 0x8000 -#define CONFIG_SYS_CORE_SRAM 0x80000000 - /* * Define baudrate for UART1 (console output, tftp, ...) * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud @@ -208,7 +205,6 @@ /* FLASH organization */ #define CONFIG_SYS_FLASH_SIZE 0x2000000 -#define CONFIG_SYS_FLASH_CFI_NONBLOCK 1 #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 789e6a4c9d..6cb1a10600 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -143,8 +143,4 @@ NANDTGTS \ #define CONFIG_NAND_OMAP_GPMC_WSCFG 1 #endif /* CONFIG_MTD_RAW_NAND */ -#if defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE -#endif - #endif /* ! __CONFIG_BRPPT1_H__ */ diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index 965eba58b3..fdbcbf5d96 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -119,10 +119,4 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -#if defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#endif - -/* Network. */ - #endif /* ! __CONFIG_CHILIBOARD_H */ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 4baf7f7e24..84b4271c36 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -79,8 +79,6 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - /* GPIO pin + bank to pin ID mapping */ #define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin) diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index c29abd15b3..ba0662f1f4 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -143,13 +143,6 @@ enter a valid image address in flash */ #define CONFIG_SYS_SCR 0x0003 #define CONFIG_SYS_SPR 0xffff -/* --- - * Ethernet settings - * --- - */ - -#define CONFIG_SYS_ENET_BD_BASE 0x780000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in internal SRAM) */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 7615696f16..a4fb2b53dc 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -92,12 +92,6 @@ #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE #endif -#define CONFIG_SYS_FLASH_BR_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \ - | BR_PS_16 | BR_V) -#define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ - | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) - #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ #ifdef CONFIG_PHYS_64BIT #define PIXIS_BASE_PHYS 0xfffdf0000ull diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index f699cb1078..58c902431d 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -134,7 +134,6 @@ #endif #ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */ #define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE #define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */ #endif diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 3acc62d9e1..7923fbb599 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -15,7 +15,6 @@ #include "siemens-am33x-common.h" /* NAND specific changes for etamin due to different page size */ #undef CONFIG_SYS_NAND_ECCPOS -#undef CONFIG_SYS_ENV_SECT_SIZE #define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */ #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 1b97e54be7..e89b800b7e 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -123,17 +123,10 @@ #define CONFIG_SYS_MRAM_BASE 0xE2000000 #define CONFIG_SYS_MRAM_SIZE 0x20000 /* 128 Kb */ -#define CONFIG_SYS_OR_TIMING_MRAM - - /* * CPLD setup */ #define CONFIG_SYS_CPLD_BASE 0xE3000000 -#define CONFIG_SYS_CPLD_SIZE 0x8000 - -#define CONFIG_SYS_OR_TIMING_MRAM - /* * HW-Watchdog diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 6becd7cd31..20a36fbe11 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -9,9 +9,6 @@ /* Do boardspecific init for all boards */ -/* EEprom support 24C08, 24C16, 24C64 */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE - /* Increase max size of compressed kernel */ /****************************************************************************** diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index eee71db37c..a91e5e8f86 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -97,9 +97,6 @@ extern void __set_direction(unsigned pin, int high); #define I2C_DELAY udelay(1) #define I2C_SOFT_DECLARATIONS -/* EEprom support 24C128, 24C256 valid for environment eeprom */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE - /* * Environment variables configurations */ diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index b124ce5262..48fe8288aa 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -60,28 +60,6 @@ #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -/* DSPI */ -#define CONFIG_FSL_DSPI1 - -#define MMAP_DSPI DSPI1_BASE_ADDR - -#define CONFIG_SYS_DSPI_CTAR0 1 - -#define CONFIG_SYS_DSPI_CTAR1 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ - DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ - DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ - DSPI_CTAR_DT(0)) - -#define CONFIG_SYS_DSPI_CTAR2 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ - DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ - DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \ - DSPI_CTAR_DT(0)) - -#define CONFIG_SYS_DSPI_CTAR3 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ - DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ - DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ - DSPI_CTAR_DT(0)) - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index c2ad2afb5e..f6efda258c 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -208,10 +208,6 @@ #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 #endif -/* Debug Server firmware */ -#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR -#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL - #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 /* diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 23ddae1dc3..c6b601de22 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -179,10 +179,6 @@ #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 #endif - -/* Debug Server firmware */ -#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR -#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL #endif #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h index 7bfc04ff18..c76e7ea160 100644 --- a/include/configs/mx6sabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -31,7 +31,6 @@ #ifdef CONFIG_MTD_NOR_FLASH #define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR -#define CONFIG_SYS_FLASH_SECT_SIZE (128 * 1024) #endif #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 2cd42e5a1d..ad3dbbcac5 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -26,7 +26,6 @@ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K /* NAND: SPL falcon mode configs */ #endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 2683d4c7ea..c47d5573c4 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -31,7 +31,6 @@ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K #endif /* CONFIG_MTD_RAW_NAND */ #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 81c1692055..1af87b271c 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -152,6 +152,4 @@ #define CONFIG_SYS_FLASH_SIZE 0x4000000 -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - #endif /* __CONFIG_H */ diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 31e94df84d..5181792b7b 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -33,8 +33,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */ - #define CONFIG_HWCONFIG #define CONFIG_SYS_INIT_RAM_ADDR 0x00100000 diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 43593572d9..ae94f0ecc5 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -18,11 +18,10 @@ /*----------------------------------------------------------------------- * System memory Configuration */ -#define CONFIG_SYS_MEM_SIZE 0x40000000 #define CONFIG_SYS_SDRAM_BASE 0x71000000 /* - * "(CONFIG_SYS_MEM_SIZE - CONFIG_SYS_RESERVE_MEM_SIZE)" has been used in + * "(0x40000000 - CONFIG_SYS_RESERVE_MEM_SIZE)" has been used in * u-boot nanopi2-v2016.01. * This is not working anymore because boot_fdt_add_mem_rsv_regions() in * common/image-fdt.c has been extended: diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index d2d4296eed..fcb0fd5cec 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -370,9 +370,6 @@ /* CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#if !defined(CONFIG_SPI_BOOT) -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#endif #endif #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index d3eb01bae6..7c0856ae32 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -167,10 +167,7 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" /* FLASH and environment organization */ -#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ #define CONFIG_SYS_FLASH_SIZE 0x04000000 -#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0 -#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1 /* Timeout values in ticks */ @@ -183,7 +180,6 @@ */ /* Store environment at top of flash */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \ - CONFIG_SYS_FLASH_BASE1 } +#define CONFIG_SYS_FLASH_BANKS_LIST { V2M_NOR0, V2M_NOR1 } #endif /* VEXPRESS_COMMON_H */ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 526165cf10..ad8ea6538c 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -76,13 +76,12 @@ #if defined(CONFIG_MAX_MEM_MAPPED) && \ CONFIG_MAX_MEM_MAPPED < CONFIG_SYS_SDRAM_SIZE -#define CONFIG_SYS_MEMORY_SIZE CONFIG_MAX_MEM_MAPPED +#define XTENSA_SYS_TEXT_ADDR \ + (MEMADDR(CONFIG_MAX_MEM_MAPPED) - CONFIG_SYS_MONITOR_LEN) #else -#define CONFIG_SYS_MEMORY_SIZE CONFIG_SYS_SDRAM_SIZE -#endif - #define XTENSA_SYS_TEXT_ADDR \ - (MEMADDR(CONFIG_SYS_MEMORY_SIZE) - CONFIG_SYS_MONITOR_LEN) + (MEMADDR(CONFIG_SYS_SDRAM_SIZE) - CONFIG_SYS_MONITOR_LEN) +#endif /*==============================*/ /* U-Boot general configuration */ @@ -105,18 +104,6 @@ * SHIFT left amount and field WIDTH (bits), and also by a bitMASK. */ -/* Date of FPGA bitstream build in binary coded decimal (BCD) */ -#define CONFIG_SYS_FPGAREG_DATE IOADDR(0x0D020000) -#define FPGAREG_MTH_SHIFT 24 /* BCD month 1..12 */ -#define FPGAREG_MTH_WIDTH 8 -#define FPGAREG_MTH_MASK 0xFF000000 -#define FPGAREG_DAY_SHIFT 16 /* BCD day 1..31 */ -#define FPGAREG_DAY_WIDTH 8 -#define FPGAREG_DAY_MASK 0x00FF0000 -#define FPGAREG_YEAR_SHIFT 0 /* BCD year 2001..9999*/ -#define FPGAREG_YEAR_WIDTH 16 -#define FPGAREG_YEAR_MASK 0x0000FFFF - /* FPGA core clock frequency in Hz (also input to UART) */ #define CONFIG_SYS_FPGAREG_FREQ IOADDR(0x0D020004) /* CPU clock frequency*/ @@ -166,17 +153,14 @@ #ifdef CONFIG_XTFPGA_LX60 # define CONFIG_SYS_FLASH_SIZE 0x0040000 /* 4MB */ -# define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* block size 64KB */ # define CONFIG_SYS_FLASH_PARMSECT_SZ 0x2000 /* param size 8KB */ # define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000) #elif defined(CONFIG_XTFPGA_KC705) # define CONFIG_SYS_FLASH_SIZE 0x8000000 /* 128MB */ -# define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */ # define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */ # define CONFIG_SYS_FLASH_BASE IOADDR(0x00000000) #else # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* 16MB */ -# define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */ # define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */ # define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000) #endif -- 2.39.5