From 13cca97251ab1a1dd3990caa417faa6dd31387e4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 28 Mar 2024 15:43:19 -0300 Subject: [PATCH] imx8mq_evk: Remove FEC and Ethernet PHY board code With Ethernet DM in place, there is no longer the need for having the board_phy_config() and setup_fec() functions anymore. Remove them. Successfully tested a TFTP transfer after these changes. Signed-off-by: Fabio Estevam --- board/freescale/imx8mq_evk/imx8mq_evk.c | 30 ------------------------- 1 file changed, 30 deletions(-) diff --git a/board/freescale/imx8mq_evk/imx8mq_evk.c b/board/freescale/imx8mq_evk/imx8mq_evk.c index e394805856..e577e4d9cc 100644 --- a/board/freescale/imx8mq_evk/imx8mq_evk.c +++ b/board/freescale/imx8mq_evk/imx8mq_evk.c @@ -54,38 +54,8 @@ int board_early_init_f(void) return 0; } -#ifdef CONFIG_FEC_MXC -static int setup_fec(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* Use 125M anatop REF_CLK1 for ENET1, not from external */ - clrsetbits_le32(&gpr->gpr[1], BIT(13) | BIT(17), 0); - return set_clk_enet(ENET_125MHZ); -} - -int board_phy_config(struct phy_device *phydev) -{ - /* enable rgmii rxc skew and phy mode select to RGMII copper */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); - - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); - - if (phydev->drv->config) - phydev->drv->config(phydev); - return 0; -} -#endif - int board_init(void) { -#ifdef CONFIG_FEC_MXC - setup_fec(); -#endif - #if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_DWC3) init_usb_clk(); #endif -- 2.39.5