From 1320fa2e55d2180573fd48c71f097e1ec7dc4833 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 14 Feb 2020 20:54:41 +0900 Subject: [PATCH] ARM: uniphier: remove workaround for the NAND write protect This workaround was previously needed for LD4, Pro4, sLD8, Pro5 SoCs. The boot ROM does not touch this register for PXs2/LD6b or later. Now that the reset signal of the Denali NAND controller is always asserted in board_init() then deasserted in the driver, the WRITE_PROTECT register gets back to the default value, which means the write protect is deasserted. This workaround can go away entirely. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/board_late_init.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/arch/arm/mach-uniphier/board_late_init.c b/arch/arm/mach-uniphier/board_late_init.c index 793283058c..378aad0c9c 100644 --- a/arch/arm/mach-uniphier/board_late_init.c +++ b/arch/arm/mach-uniphier/board_late_init.c @@ -14,25 +14,9 @@ #include #include #include -#include <../drivers/mtd/nand/raw/denali.h> #include "init.h" -static void nand_denali_wp_disable(void) -{ -#ifdef CONFIG_NAND_DENALI - /* - * Since the boot rom enables the write protection for NAND boot mode, - * it must be disabled somewhere for "nand write", "nand erase", etc. - * The workaround is here to not disturb the Denali NAND controller - * driver just for a really SoC-specific thing. - */ - void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; - - writel(WRITE_PROTECT__FLAG, denali_reg + WRITE_PROTECT); -#endif -} - static void uniphier_set_env_fdt_file(void) { DECLARE_GLOBAL_DATA_PTR; @@ -114,7 +98,6 @@ int board_late_init(void) case BOOT_DEVICE_NAND: printf("NAND Boot"); env_set("bootdev", "nand"); - nand_denali_wp_disable(); break; case BOOT_DEVICE_NOR: printf("NOR Boot"); -- 2.39.5