From 0de1a40ff4618da9a7cb1b61ea4868cd290bb458 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Duje=20Mihanovi=C4=87?= Date: Wed, 18 Dec 2024 16:57:28 +0100 Subject: [PATCH] slim down DTs --- .../dts/pxa1908-samsung-coreprimevelte.dts | 197 ------------------ arch/arm/dts/pxa1908.dtsi | 172 --------------- 2 files changed, 369 deletions(-) diff --git a/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts b/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts index 5749b5f568..a7d3ce278f 100644 --- a/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts +++ b/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts @@ -9,9 +9,6 @@ compatible = "samsung,coreprimevelte", "marvell,pxa1908"; aliases { - mmc0 = &sdh2; /* eMMC */ - mmc1 = &sdh0; /* SD card */ - mmc2 = &sdh1; /* SDIO */ serial0 = &uart0; }; @@ -77,76 +74,6 @@ max-reason = <5>; }; }; - - - i2c-muic { - compatible = "i2c-gpio"; - sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <3>; - i2c-gpio,timeout-ms = <100>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_muic_pins>; - - muic: extcon@14 { - compatible = "siliconmitus,sm5504-muic"; - reg = <0x14>; - interrupt-parent = <&gpio>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - autorepeat; - - key-home { - label = "Home"; - linux,code = ; - gpios = <&gpio 50 GPIO_ACTIVE_LOW>; - }; - - key-volup { - label = "Volume Up"; - linux,code = ; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - - key-voldown { - label = "Volume Down"; - linux,code = ; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - }; - }; - - backlight { - compatible = "kinetic,ktd2801"; - ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; - max-brightness = <210>; - }; - - wlan_pwrseq: pwrseq0 { - compatible = "mmc-pwrseq-simple"; - powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; - }; - - vibrator { - compatible = "pwm-vibrator"; - pwm-names = "enable"; - pwms = <&pwm 100000>; - enable-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_pins>; - }; -}; - -&smmu { - status = "okay"; }; &pmx { @@ -476,127 +403,3 @@ pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; }; - -&twsi0 { - status = "okay"; -}; - -&twsi1 { - status = "okay"; -}; - -&twsi2 { - status = "okay"; - - pmic@30 { - compatible = "marvell,88pm886-a1"; - reg = <0x30>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <1>; - - onkey { - compatible = "marvell,88pm88x-onkey"; - wakeup-source; - }; - - regulators { - ldo2: ldo2 { - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3300000>; - }; - - ldo15: ldo15 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - buck2: buck2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - }; -}; - -&twsi3 { - status = "okay"; - - touchscreen@50 { - compatible = "imagis,ist3032c"; - reg = <0x50>; - interrupt-parent = <&gpio>; - interrupts = <72 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&ldo2>; - touchscreen-size-x = <480>; - touchscreen-size-y = <800>; - linux,code = , ; - }; -}; - -&usb { - extcon = <&muic>, <&muic>; -}; - -&sdh2 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&sdh2_pins_1 &sdh2_pins_2 &sdh2_pins_3>; - pinctrl-1 = <&sdh2_pins_1_fast &sdh2_pins_2_fast &sdh2_pins_3_fast>; - bus-width = <8>; - non-removable; - mmc-ddr-1_8v; -}; - -&sdh0 { - pinctrl-names = "default"; - pinctrl-0 = <&sdh0_pins_1 &sdh0_pins_2 &sdh0_pins_3>; - cd-gpios = <&gpio 11 0>; - cd-inverted; - bus-width = <4>; - wp-inverted; -}; - -&sdh1 { - status = "okay"; - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&sdh1_pins_1 &sdh1_pins_2 &sdh1_pins_3>; - pinctrl-1 = <&sdh1_pins_1_fast &sdh1_pins_2_fast &sdh1_pins_3>; - pinctrl-2 = <&sdh1_edge_wakeup>; - bus-width = <4>; - max-frequency = <200000000>; - cap-sd-highspeed; - sd-uhs-sdr50; - sd-uhs-sdr104; - keep-power-in-suspend; - wakeup-source; - cap-sdio-irq; - vmmc-supply = <&ldo15>; - vqmmc-supply = <&buck2>; - mmc-pwrseq = <&wlan_pwrseq>; - non-removable; - cap-power-off-card; - - #address-cells = <1>; - #size-cells = <0>; - - mwifiex: wifi@1 { - compatible = "marvell,sd8777"; - reg = <1>; - interrupt-parent = <&gpio>; - interrupts = <38 IRQ_TYPE_LEVEL_LOW>; - marvell,wakeup-pin = <3>; - }; - - btmrvl: bluetooth@2 { - compatible = "marvell,sd8777-bt"; - reg = <2>; - interrupt-parent = <&gpio>; - interrupts = <40 IRQ_TYPE_LEVEL_LOW>; - - marvell,cal-data = /bits/ 8 < - 0x00 0x1c 0xfa 0x37 0xff 0xff 0xff 0xff 0x00 0x0d 0x7f 0x01 - 0xce 0xba 0x00 0x00 0x00 0x2d 0xc6 0xc0 0x00 0x00 0x00 0x00 - 0x00 0xf0 0x00 0x00>; - }; -}; diff --git a/arch/arm/dts/pxa1908.dtsi b/arch/arm/dts/pxa1908.dtsi index b0c9f80d78..8db4978646 100644 --- a/arch/arm/dts/pxa1908.dtsi +++ b/arch/arm/dts/pxa1908.dtsi @@ -44,15 +44,6 @@ }; }; - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -72,16 +63,6 @@ #size-cells = <2>; ranges; - smmu: iommu@c0010000 { - compatible = "arm,mmu-400"; - reg = <0 0xc0010000 0 0x10000>; - #global-interrupts = <1>; - #iommu-cells = <1>; - interrupts = , - ; - status = "disabled"; - }; - gic: interrupt-controller@d1df9000 { compatible = "arm,gic-400"; reg = <0 0xd1df9000 0 0x1000>, @@ -101,53 +82,6 @@ #size-cells = <1>; ranges = <0 0 0xd4000000 0x200000>; - pdma: dma-controller@0 { - compatible = "marvell,pdma-1.0"; - reg = <0 0x10000>; - interrupts = ; - dma-channels = <30>; - #dma-cells = <2>; - }; - - twsi1: i2c@10800 { - compatible = "mrvl,mmp-twsi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10800 0x64>; - interrupts = ; - clocks = <&apbc PXA1908_CLK_TWSI1>; - mrvl,i2c-fast-mode; - status = "disabled"; - }; - - twsi0: i2c@11000 { - compatible = "mrvl,mmp-twsi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x11000 0x64>; - interrupts = ; - clocks = <&apbc PXA1908_CLK_TWSI0>; - mrvl,i2c-fast-mode; - status = "disabled"; - }; - - twsi3: i2c@13800 { - compatible = "mrvl,mmp-twsi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x13800 0x64>; - interrupts = ; - clocks = <&apbc PXA1908_CLK_TWSI3>; - mrvl,i2c-fast-mode; - status = "disabled"; - }; - - apbc: clock-controller@15000 { - compatible = "marvell,pxa1908-apbc"; - reg = <0x15000 0x1000>; - #clock-cells = <1>; - }; - uart0: serial@17000 { compatible = "mrvl,mmp-uart", "intel,xscale-uart", "ns16550"; reg = <0x17000 0x1000>; @@ -164,44 +98,6 @@ reg-shift = <2>; }; - gpio: gpio@19000 { - compatible = "marvell,mmp-gpio"; - reg = <0x19000 0x800>; - #address-cells = <1>; - #size-cells = <1>; - gpio-controller; - #gpio-cells = <2>; - clocks = <&apbc PXA1908_CLK_GPIO>; - interrupts = ; - interrupt-names = "gpio_mux"; - interrupt-controller; - #interrupt-cells = <2>; - ranges = <0 0x19000 0x800>; - - gpio@0 { - reg = <0x0 0x4>; - }; - - gpio@4 { - reg = <0x4 0x4>; - }; - - gpio@8 { - reg = <0x8 0x4>; - }; - - gpio@100 { - reg = <0x100 0x4>; - }; - }; - - pwm: pwm@1ac00 { - compatible = "marvell,pxa250-pwm"; - reg = <0x1ac00 0x10>; - #pwm-cells = <1>; - clocks = <&apbc PXA1908_CLK_PWM3>; - }; - pmx: pinmux@1e000 { compatible = "marvell,pxa1908-padconf", "pinconf-single"; reg = <0x1e000 0x330>; @@ -227,17 +123,6 @@ reg-shift = <2>; }; - twsi2: i2c@37000 { - compatible = "mrvl,mmp-twsi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x37000 0x64>; - interrupts = ; - clocks = <&apbcp PXA1908_CLK_TWSI2>; - mrvl,i2c-fast-mode; - status = "disabled"; - }; - apbcp: clock-controller@3b000 { compatible = "marvell,pxa1908-apbcp"; reg = <0x3b000 0x1000>; @@ -250,62 +135,5 @@ #clock-cells = <1>; }; }; - - axi@d4200000 { - compatible = "simple-bus"; - reg = <0 0xd4200000 0 0x200000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xd4200000 0x200000>; - - usbphy: phy@7000 { - compatible = "marvell,pxa1928-usb-phy"; - reg = <0x7000 0x200>; - clocks = <&apmu PXA1908_CLK_USB>; - #phy-cells = <0>; - }; - - usb: usb@8000 { - compatible = "chipidea,usb2"; - reg = <0x8000 0x200>; - interrupts = ; - clocks = <&apmu PXA1908_CLK_USB>; - phys = <&usbphy>; - phy-names = "usb-phy"; - }; - - sdh0: mmc@80000 { - compatible = "mrvl,pxav3-mmc"; - reg = <0x80000 0x120>; - interrupts = ; - clocks = <&apmu PXA1908_CLK_SDH0>; - clock-names = "io"; - mrvl,clk-delay-cycles = <31>; - }; - - sdh1: mmc@80800 { - compatible = "mrvl,pxav3-mmc"; - reg = <0x80800 0x120>; - interrupts = ; - clocks = <&apmu PXA1908_CLK_SDH1>; - clock-names = "io"; - mrvl,clk-delay-cycles = <31>; - }; - - sdh2: mmc@81000 { - compatible = "mrvl,pxav3-mmc"; - reg = <0x81000 0x120>; - interrupts = ; - clocks = <&apmu PXA1908_CLK_SDH2>; - clock-names = "io"; - mrvl,clk-delay-cycles = <31>; - }; - - apmu: clock-controller@82800 { - compatible = "marvell,pxa1908-apmu"; - reg = <0x82800 0x400>; - #clock-cells = <1>; - }; - }; }; }; -- 2.39.5