From 0c3cd2443bb0c87dc8ebe117e1fb34c9060f863e Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 10 Feb 2021 12:51:24 -0500 Subject: [PATCH] sh: Remove sh7753evb board This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini --- arch/sh/Kconfig | 5 - board/renesas/sh7753evb/Kconfig | 12 - board/renesas/sh7753evb/MAINTAINERS | 6 - board/renesas/sh7753evb/Makefile | 7 - board/renesas/sh7753evb/lowlevel_init.S | 414 ------------------------ board/renesas/sh7753evb/sh7753evb.c | 329 ------------------- board/renesas/sh7753evb/spi-boot.c | 133 -------- configs/sh7753evb_defconfig | 38 --- doc/board/index.rst | 1 - doc/board/renesas/index.rst | 9 - doc/board/renesas/sh7753evb.rst | 79 ----- include/configs/sh7753evb.h | 65 ---- 12 files changed, 1098 deletions(-) delete mode 100644 board/renesas/sh7753evb/Kconfig delete mode 100644 board/renesas/sh7753evb/MAINTAINERS delete mode 100644 board/renesas/sh7753evb/Makefile delete mode 100644 board/renesas/sh7753evb/lowlevel_init.S delete mode 100644 board/renesas/sh7753evb/sh7753evb.c delete mode 100644 board/renesas/sh7753evb/spi-boot.c delete mode 100644 configs/sh7753evb_defconfig delete mode 100644 doc/board/renesas/index.rst delete mode 100644 doc/board/renesas/sh7753evb.rst delete mode 100644 include/configs/sh7753evb.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 8446d9587e..d8d2a7ffe9 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -25,10 +25,6 @@ config TARGET_R2DPLUS bool "Renesas R2D-PLUS" select CPU_SH4 -config TARGET_SH7753EVB - bool "SH7753EVB" - select CPU_SH4 - config TARGET_SH7757LCR bool "SH7757LCR" select CPU_SH4A @@ -48,7 +44,6 @@ config SYS_CPU source "arch/sh/lib/Kconfig" source "board/renesas/r2dplus/Kconfig" -source "board/renesas/sh7753evb/Kconfig" source "board/renesas/sh7757lcr/Kconfig" source "board/renesas/sh7763rdp/Kconfig" diff --git a/board/renesas/sh7753evb/Kconfig b/board/renesas/sh7753evb/Kconfig deleted file mode 100644 index be889248a8..0000000000 --- a/board/renesas/sh7753evb/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SH7753EVB - -config SYS_BOARD - default "sh7753evb" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "sh7753evb" - -endif diff --git a/board/renesas/sh7753evb/MAINTAINERS b/board/renesas/sh7753evb/MAINTAINERS deleted file mode 100644 index b6c85eedab..0000000000 --- a/board/renesas/sh7753evb/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SH7753EVB BOARD -#M: - -S: Maintained -F: board/renesas/sh7753evb/ -F: include/configs/sh7753evb.h -F: configs/sh7753evb_defconfig diff --git a/board/renesas/sh7753evb/Makefile b/board/renesas/sh7753evb/Makefile deleted file mode 100644 index e1e099777c..0000000000 --- a/board/renesas/sh7753evb/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2012 Yoshihiro Shimoda -# - -obj-y := sh7753evb.o spi-boot.o -extra-y += lowlevel_init.o diff --git a/board/renesas/sh7753evb/lowlevel_init.S b/board/renesas/sh7753evb/lowlevel_init.S deleted file mode 100644 index 901e9eb648..0000000000 --- a/board/renesas/sh7753evb/lowlevel_init.S +++ /dev/null @@ -1,414 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - */ - -#include -#include -#include - -.macro or32, addr, data - mov.l \addr, r1 - mov.l \data, r0 - mov.l @r1, r2 - or r2, r0 - mov.l r0, @r1 -.endm - -.macro wait_DBCMD - mov.l DBWAIT_A, r0 - mov.l @r0, r1 -.endm - - .global lowlevel_init - .section .spiboot1.text - .align 2 - -lowlevel_init: - mov #0, r14 - mova 2f, r0 - mov.l PC_MASK, r1 - tst r0, r1 - bf 2f - - bra exit_pmb - nop - - .align 2 - -/* If CPU runs on SDRAM (PC=0x5???????) or not. */ -PC_MASK: .long 0x20000000 - -2: - mov #1, r14 - - mov.l EXPEVT_A, r0 - mov.l @r0, r0 - mov.l EXPEVT_POWER_ON_RESET, r1 - cmp/eq r0, r1 - bt 1f - - /* - * If EXPEVT value is manual reset or tlb multipul-hit, - * initialization of DBSC3 is not necessary. - */ - bra exit_ddr - nop - -1: - /*------- Reset -------*/ - write32 MRSTCR0_A, MRSTCR0_D - write32 MRSTCR1_A, MRSTCR1_D - - /* For Core Reset */ - mov.l DBACEN_A, r0 - mov.l @r0, r0 - cmp/eq #0, r0 - bt 3f - - /* - * If DBACEN == 1(DBSC was already enabled), we have to avoid the - * initialization of DDR3-SDRAM. - */ - bra exit_ddr - nop - -3: - /*------- DBSC3 -------*/ - /* oscillation stabilization time */ - wait_timer WAIT_OSC_TIME - - /* step 3 */ - write32 DBKIND_A, DBKIND_D - - /* step 4 */ - write32 DBCONF_A, DBCONF_D - write32 DBTR0_A, DBTR0_D - write32 DBTR1_A, DBTR1_D - write32 DBTR2_A, DBTR2_D - write32 DBTR3_A, DBTR3_D - write32 DBTR4_A, DBTR4_D - write32 DBTR5_A, DBTR5_D - write32 DBTR6_A, DBTR6_D - write32 DBTR7_A, DBTR7_D - write32 DBTR8_A, DBTR8_D - write32 DBTR9_A, DBTR9_D - write32 DBTR10_A, DBTR10_D - write32 DBTR11_A, DBTR11_D - write32 DBTR12_A, DBTR12_D - write32 DBTR13_A, DBTR13_D - write32 DBTR14_A, DBTR14_D - write32 DBTR15_A, DBTR15_D - write32 DBTR16_A, DBTR16_D - write32 DBTR17_A, DBTR17_D - write32 DBTR18_A, DBTR18_D - write32 DBTR19_A, DBTR19_D - write32 DBRNK0_A, DBRNK0_D - write32 DBADJ0_A, DBADJ0_D - write32 DBADJ2_A, DBADJ2_D - - /* step 5 */ - write32 DBCMD_A, DBCMD_RSTL_VAL - wait_timer WAIT_30US - - /* step 6 */ - write32 DBCMD_A, DBCMD_PDEN_VAL - - /* step 7 */ - write32 DBPDCNT3_A, DBPDCNT3_D - - /* step 8 */ - write32 DBPDCNT1_A, DBPDCNT1_D - write32 DBPDCNT2_A, DBPDCNT2_D - write32 DBPDLCK_A, DBPDLCK_D - write32 DBPDRGA_A, DBPDRGA_D - write32 DBPDRGD_A, DBPDRGD_D - - /* step 9 */ - wait_timer WAIT_30US - - /* step 10 */ - write32 DBPDCNT0_A, DBPDCNT0_D - - /* step 11 */ - wait_timer WAIT_30US - wait_timer WAIT_30US - - /* step 12 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - wait_DBCMD - - /* step 13 */ - write32 DBCMD_A, DBCMD_RSTH_VAL - wait_DBCMD - - /* step 14 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - - /* step 15 */ - write32 DBCMD_A, DBCMD_PDXT_VAL - - /* step 16 */ - write32 DBCMD_A, DBCMD_MRS2_VAL - - /* step 17 */ - write32 DBCMD_A, DBCMD_MRS3_VAL - - /* step 18 */ - write32 DBCMD_A, DBCMD_MRS1_VAL - - /* step 19 */ - write32 DBCMD_A, DBCMD_MRS0_VAL - write32 DBPDNCNF_A, DBPDNCNF_D - - /* step 20 */ - write32 DBCMD_A, DBCMD_ZQCL_VAL - - write32 DBCMD_A, DBCMD_REF_VAL - write32 DBCMD_A, DBCMD_REF_VAL - wait_DBCMD - - /* step 21 */ - write32 DBCALTR_A, DBCALTR_D - - /* step 22 */ - write32 DBRFCNF0_A, DBRFCNF0_D - write32 DBRFCNF1_A, DBRFCNF1_D - write32 DBRFCNF2_A, DBRFCNF2_D - - /* step 23 */ - write32 DBCALCNF_A, DBCALCNF_D - - /* step 24 */ - write32 DBRFEN_A, DBRFEN_D - write32 DBCMD_A, DBCMD_SRXT_VAL - - /* step 25 */ - write32 DBACEN_A, DBACEN_D - - /* step 26 */ - wait_DBCMD - - bra exit_ddr - nop - - .align 2 - -EXPEVT_A: .long 0xff000024 -EXPEVT_POWER_ON_RESET: .long 0x00000000 - -/*------- Reset -------*/ -MRSTCR0_A: .long 0xffd50030 -MRSTCR0_D: .long 0xfe1ffe7f -MRSTCR1_A: .long 0xffd50034 -MRSTCR1_D: .long 0xfff3ffff - -/*------- DBSC3 -------*/ -DBCMD_A: .long 0xfe800018 -DBKIND_A: .long 0xfe800020 -DBCONF_A: .long 0xfe800024 -DBTR0_A: .long 0xfe800040 -DBTR1_A: .long 0xfe800044 -DBTR2_A: .long 0xfe800048 -DBTR3_A: .long 0xfe800050 -DBTR4_A: .long 0xfe800054 -DBTR5_A: .long 0xfe800058 -DBTR6_A: .long 0xfe80005c -DBTR7_A: .long 0xfe800060 -DBTR8_A: .long 0xfe800064 -DBTR9_A: .long 0xfe800068 -DBTR10_A: .long 0xfe80006c -DBTR11_A: .long 0xfe800070 -DBTR12_A: .long 0xfe800074 -DBTR13_A: .long 0xfe800078 -DBTR14_A: .long 0xfe80007c -DBTR15_A: .long 0xfe800080 -DBTR16_A: .long 0xfe800084 -DBTR17_A: .long 0xfe800088 -DBTR18_A: .long 0xfe80008c -DBTR19_A: .long 0xfe800090 -DBRNK0_A: .long 0xfe800100 -DBPDCNT0_A: .long 0xfe800200 -DBPDCNT1_A: .long 0xfe800204 -DBPDCNT2_A: .long 0xfe800208 -DBPDCNT3_A: .long 0xfe80020c -DBPDLCK_A: .long 0xfe800280 -DBPDRGA_A: .long 0xfe800290 -DBPDRGD_A: .long 0xfe8002a0 -DBADJ0_A: .long 0xfe8000c0 -DBADJ2_A: .long 0xfe8000c8 -DBRFCNF0_A: .long 0xfe8000e0 -DBRFCNF1_A: .long 0xfe8000e4 -DBRFCNF2_A: .long 0xfe8000e8 -DBCALCNF_A: .long 0xfe8000f4 -DBRFEN_A: .long 0xfe800014 -DBACEN_A: .long 0xfe800010 -DBWAIT_A: .long 0xfe80001c -DBCALTR_A: .long 0xfe8000f8 -DBPDNCNF_A: .long 0xfe800180 - -WAIT_OSC_TIME: .long 6000 -WAIT_30US: .long 13333 - -DBCMD_RSTL_VAL: .long 0x20000000 -DBCMD_PDEN_VAL: .long 0x1000d73c -DBCMD_WAIT_VAL: .long 0x0000d73c -DBCMD_RSTH_VAL: .long 0x2100d73c -DBCMD_PDXT_VAL: .long 0x110000c8 -DBCMD_MRS0_VAL: .long 0x28000930 -DBCMD_MRS1_VAL: .long 0x29000004 -DBCMD_MRS2_VAL: .long 0x2a000008 -DBCMD_MRS3_VAL: .long 0x2b000000 -DBCMD_ZQCL_VAL: .long 0x03000200 -DBCMD_REF_VAL: .long 0x0c000000 -DBCMD_SRXT_VAL: .long 0x19000000 -DBKIND_D: .long 0x00000007 -DBCONF_D: .long 0x0f030a01 -DBTR0_D: .long 0x00000007 -DBTR1_D: .long 0x00000006 -DBTR2_D: .long 0x00000000 -DBTR3_D: .long 0x00000007 -DBTR4_D: .long 0x00070007 -DBTR5_D: .long 0x0000001b -DBTR6_D: .long 0x00000014 -DBTR7_D: .long 0x00000004 -DBTR8_D: .long 0x00000014 -DBTR9_D: .long 0x00000004 -DBTR10_D: .long 0x00000008 -DBTR11_D: .long 0x00000007 -DBTR12_D: .long 0x0000000e -DBTR13_D: .long 0x000000a0 -DBTR14_D: .long 0x00060006 -DBTR15_D: .long 0x00000003 -DBTR16_D: .long 0x00160002 -DBTR17_D: .long 0x000c0000 -DBTR18_D: .long 0x00000200 -DBTR19_D: .long 0x00000040 -DBRNK0_D: .long 0x00000001 -DBPDCNT0_D: .long 0x00000001 -DBPDCNT1_D: .long 0x00000001 -DBPDCNT2_D: .long 0x00000000 -DBPDCNT3_D: .long 0x00004010 -DBPDLCK_D: .long 0x0000a55a -DBPDRGA_D: .long 0x00000028 -DBPDRGD_D: .long 0x00017100 - -DBADJ0_D: .long 0x00010000 -DBADJ2_D: .long 0x18061806 -DBRFCNF0_D: .long 0x000001ff -DBRFCNF1_D: .long 0x00081040 -DBRFCNF2_D: .long 0x00000000 -DBCALCNF_D: .long 0x0000ffff -DBRFEN_D: .long 0x00000001 -DBACEN_D: .long 0x00000001 -DBCALTR_D: .long 0x08200820 -DBPDNCNF_D: .long 0x00000001 - - .align 2 -exit_ddr: -#if defined(CONFIG_SH_32BIT) - /*------- set PMB -------*/ - write32 PASCR_A, PASCR_29BIT_D - write32 MMUCR_A, MMUCR_D - - /***************************************************************** - * ent virt phys v sz c wt - * 0 0xa0000000 0x00000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - */ - write32 PMB_ADDR_SPIBOOT_A, PMB_ADDR_SPIBOOT_D - write32 PMB_DATA_SPIBOOT_A, PMB_DATA_SPIBOOT_D - write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D - write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D - write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D - write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D - - write32 PMB_ADDR_ENTRY2, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY3, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY4, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY6, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY7, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY8, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY9, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY10, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY11, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY12, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY13, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY14, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY15, PMB_ADDR_NOT_USE_D - - write32 PASCR_A, PASCR_INIT - mov.l DUMMY_ADDR, r0 - icbi @r0 -#endif /* if defined(CONFIG_SH_32BIT) */ - -exit_pmb: - /* CPU is running on ILRAM? */ - mov r14, r0 - tst #1, r0 - bt 1f - - mov.l _stack_ilram, r15 - mov.l _spiboot_main, r0 -100: bsrf r0 - nop - - .align 2 -_spiboot_main: .long (spiboot_main - (100b + 4)) -_stack_ilram: .long 0xe5204000 - -1: - write32 CCR_A, CCR_D - - rts - nop - - .align 2 - -#if defined(CONFIG_SH_32BIT) -/*------- set PMB -------*/ -PMB_ADDR_SPIBOOT_A: .long PMB_ADDR_BASE(0) -PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(1) -PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(5) -PMB_ADDR_ENTRY2: .long PMB_ADDR_BASE(2) -PMB_ADDR_ENTRY3: .long PMB_ADDR_BASE(3) -PMB_ADDR_ENTRY4: .long PMB_ADDR_BASE(4) -PMB_ADDR_ENTRY6: .long PMB_ADDR_BASE(6) -PMB_ADDR_ENTRY7: .long PMB_ADDR_BASE(7) -PMB_ADDR_ENTRY8: .long PMB_ADDR_BASE(8) -PMB_ADDR_ENTRY9: .long PMB_ADDR_BASE(9) -PMB_ADDR_ENTRY10: .long PMB_ADDR_BASE(10) -PMB_ADDR_ENTRY11: .long PMB_ADDR_BASE(11) -PMB_ADDR_ENTRY12: .long PMB_ADDR_BASE(12) -PMB_ADDR_ENTRY13: .long PMB_ADDR_BASE(13) -PMB_ADDR_ENTRY14: .long PMB_ADDR_BASE(14) -PMB_ADDR_ENTRY15: .long PMB_ADDR_BASE(15) - -PMB_ADDR_SPIBOOT_D: .long mk_pmb_addr_val(0xa0) -PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88) -PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8) -PMB_ADDR_NOT_USE_D: .long 0x00000000 - -PMB_DATA_SPIBOOT_A: .long PMB_DATA_BASE(0) -PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(1) -PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(5) - -/* ppn ub v s1 s0 c wt */ -PMB_DATA_SPIBOOT_D: .long mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1) -PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1) -PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1) - -PASCR_A: .long 0xff000070 -DUMMY_ADDR: .long 0xa0000000 -PASCR_29BIT_D: .long 0x00000000 -PASCR_INIT: .long 0x80000080 -MMUCR_A: .long 0xff000010 -MMUCR_D: .long 0x00000004 /* clear ITLB */ -#endif /* CONFIG_SH_32BIT */ - -CCR_A: .long CCR -CCR_D: .long CCR_CACHE_INIT diff --git a/board/renesas/sh7753evb/sh7753evb.c b/board/renesas/sh7753evb/sh7753evb.c deleted file mode 100644 index f34dec1dfa..0000000000 --- a/board/renesas/sh7753evb/sh7753evb.c +++ /dev/null @@ -1,329 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2012 Renesas Solutions Corp. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -int checkboard(void) -{ - puts("BOARD: SH7753 EVB\n"); - - return 0; -} - -static void init_gpio(void) -{ - struct gpio_regs *gpio = GPIO_BASE; - struct sermux_regs *sermux = SERMUX_BASE; - - /* GPIO */ - writew(0x0000, &gpio->pacr); /* GETHER */ - writew(0x0001, &gpio->pbcr); /* INTC */ - writew(0x0000, &gpio->pccr); /* PWMU, INTC */ - writew(0x0000, &gpio->pdcr); /* SPI0 */ - writew(0xeaff, &gpio->pecr); /* GPIO */ - writew(0x0000, &gpio->pfcr); /* WDT */ - writew(0x0004, &gpio->pgcr); /* SPI0, GETHER MDIO gate(PTG1) */ - writew(0x0000, &gpio->phcr); /* SPI1 */ - writew(0x0000, &gpio->picr); /* SDHI */ - writew(0x0000, &gpio->pjcr); /* SCIF4 */ - writew(0x0003, &gpio->pkcr); /* SerMux */ - writew(0x0000, &gpio->plcr); /* SerMux */ - writew(0x0000, &gpio->pmcr); /* RIIC */ - writew(0x0000, &gpio->pncr); /* USB, SGPIO */ - writew(0x0000, &gpio->pocr); /* SGPIO */ - writew(0xd555, &gpio->pqcr); /* GPIO */ - writew(0x0000, &gpio->prcr); /* RIIC */ - writew(0x0000, &gpio->pscr); /* RIIC */ - writew(0x0000, &gpio->ptcr); /* STATUS */ - writeb(0x00, &gpio->pudr); - writew(0x5555, &gpio->pucr); /* Debug LED */ - writew(0x0000, &gpio->pvcr); /* RSPI */ - writew(0x0000, &gpio->pwcr); /* EVC */ - writew(0x0000, &gpio->pxcr); /* LBSC */ - writew(0x0000, &gpio->pycr); /* LBSC */ - writew(0x0000, &gpio->pzcr); /* eMMC */ - writew(0xfe00, &gpio->psel0); - writew(0x0000, &gpio->psel1); - writew(0x3000, &gpio->psel2); - writew(0xff00, &gpio->psel3); - writew(0x771f, &gpio->psel4); - writew(0x0ffc, &gpio->psel5); - writew(0x00ff, &gpio->psel6); - writew(0xfc00, &gpio->psel7); - - writeb(0x10, &sermux->smr0); /* SMR0: SerMux mode 0 */ -} - -static void init_usb_phy(void) -{ - struct usb_common_regs *common0 = USB0_COMMON_BASE; - struct usb_common_regs *common1 = USB1_COMMON_BASE; - struct usb0_phy_regs *phy = USB0_PHY_BASE; - struct usb1_port_regs *port = USB1_PORT_BASE; - struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE; - - writew(0x0100, &phy->reset); /* set reset */ - /* port0 = USB0, port1 = USB1 */ - writew(0x0002, &phy->portsel); - writel(0x0001, &port->port1sel); /* port1 = Host */ - writew(0x0111, &phy->reset); /* clear reset */ - - writew(0x4000, &common0->suspmode); - writew(0x4000, &common1->suspmode); - -#if defined(__LITTLE_ENDIAN) - writel(0x00000000, &align->ehcidatac); - writel(0x00000000, &align->ohcidatac); -#endif -} - -static void init_gether_mdio(void) -{ - struct gpio_regs *gpio = GPIO_BASE; - - writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr); - writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr); /* Use ET0-MDIO */ -} - -static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string) -{ - struct ether_mac_regs *ether; - unsigned char mac[6]; - unsigned long val; - - string_to_enetaddr(mac_string, mac); - - if (!channel) - ether = GETHER0_MAC_BASE; - else - ether = GETHER1_MAC_BASE; - - val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; - writel(val, ðer->mahr); - val = (mac[4] << 8) | mac[5]; - writel(val, ðer->malr); -} - -#if defined(CONFIG_SH_32BIT) -/***************************************************************** - * This PMB must be set on this timing. The lowlevel_init is run on - * Area 0(phys 0x00000000), so we have to map it. - * - * The new PMB table is following: - * ent virt phys v sz c wt - * 0 0xa0000000 0x40000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 2 0xb0000000 0x50000000 1 128M 0 1 - * 3 0xb8000000 0x58000000 1 128M 0 1 - * 4 0x80000000 0x40000000 1 128M 1 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - * 6 0x90000000 0x50000000 1 128M 1 1 - * 7 0x98000000 0x58000000 1 128M 1 1 - */ -static void set_pmb_on_board_init(void) -{ - struct mmu_regs *mmu = MMU_BASE; - - /* clear ITLB */ - writel(0x00000004, &mmu->mmucr); - - /* delete PMB for SPIBOOT */ - writel(0, PMB_ADDR_BASE(0)); - writel(0, PMB_DATA_BASE(0)); - - /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */ - /* ppn ub v s1 s0 c wt */ - writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0)); - writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0)); - writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2)); - writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2)); - writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3)); - writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3)); - writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4)); - writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4)); - writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6)); - writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6)); - writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7)); - writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7)); -} -#endif - -int board_init(void) -{ - struct gether_control_regs *gether = GETHER_CONTROL_BASE; - - init_gpio(); -#if defined(CONFIG_SH_32BIT) - set_pmb_on_board_init(); -#endif - - /* Sets TXnDLY to B'010 */ - writel(0x00000202, &gether->gbecont); - - init_usb_phy(); - init_gether_mdio(); - - return 0; -} - -int board_mmc_init(struct bd_info *bis) -{ - struct gpio_regs *gpio = GPIO_BASE; - - writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr); - writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */ - udelay(1); - writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr); /* Release reset */ - udelay(200); - - return mmcif_mmc_init(); -} - -static int get_sh_eth_mac_raw(unsigned char *buf, int size) -{ -#ifdef CONFIG_DEPRECATED - struct spi_flash *spi; - int ret; - - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (spi == NULL) { - printf("%s: spi_flash probe failed.\n", __func__); - return 1; - } - - ret = spi_flash_read(spi, SH7753EVB_ETHERNET_MAC_BASE, size, buf); - if (ret) { - printf("%s: spi_flash read failed.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); -#endif - - return 0; -} - -static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf) -{ - memcpy(mac_string, &buf[channel * (SH7753EVB_ETHERNET_MAC_SIZE + 1)], - SH7753EVB_ETHERNET_MAC_SIZE); - mac_string[SH7753EVB_ETHERNET_MAC_SIZE] = 0x00; /* terminate */ - - return 0; -} - -static void init_ethernet_mac(void) -{ - char mac_string[64]; - char env_string[64]; - int i; - unsigned char *buf; - - buf = malloc(256); - if (!buf) { - printf("%s: malloc failed.\n", __func__); - return; - } - get_sh_eth_mac_raw(buf, 256); - - /* Gigabit Ethernet */ - for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i, mac_string, buf); - if (i == 0) - env_set("ethaddr", mac_string); - else { - sprintf(env_string, "eth%daddr", i); - env_set(env_string, mac_string); - } - set_mac_to_sh_giga_eth_register(i, mac_string); - } - - free(buf); -} - -int board_late_init(void) -{ - init_ethernet_mac(); - - return 0; -} - -#ifdef CONFIG_DEPRECATED -int do_write_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - int i, ret; - char mac_string[256]; - struct spi_flash *spi; - unsigned char *buf; - - if (argc != 3) { - buf = malloc(256); - if (!buf) { - printf("%s: malloc failed.\n", __func__); - return 1; - } - - get_sh_eth_mac_raw(buf, 256); - - /* print current MAC address */ - for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i, mac_string, buf); - printf("GETHERC ch%d = %s\n", i, mac_string); - } - free(buf); - return 0; - } - - /* new setting */ - memset(mac_string, 0xff, sizeof(mac_string)); - sprintf(mac_string, "%s\t%s", - argv[1], argv[2]); - - /* write MAC data to SPI rom */ - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (!spi) { - printf("%s: spi_flash probe failed.\n", __func__); - return 1; - } - - ret = spi_flash_erase(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI, - SH7753EVB_SPI_SECTOR_SIZE); - if (ret) { - printf("%s: spi_flash erase failed.\n", __func__); - return 1; - } - - ret = spi_flash_write(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI, - sizeof(mac_string), mac_string); - if (ret) { - printf("%s: spi_flash write failed.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); - - puts("The writing of the MAC address to SPI ROM was completed.\n"); - - return 0; -} - -U_BOOT_CMD( - write_mac, 3, 1, do_write_mac, - "write MAC address for GETHERC", - "[GETHERC ch0] [GETHERC ch1]\n" -); -#endif diff --git a/board/renesas/sh7753evb/spi-boot.c b/board/renesas/sh7753evb/spi-boot.c deleted file mode 100644 index 243c6f6e88..0000000000 --- a/board/renesas/sh7753evb/spi-boot.c +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - */ - -#include - -#define CONFIG_SPI_ADDR 0x00000000 -#define PHYADDR(_addr) ((_addr & 0x1fffffff) | 0x40000000) -#define CONFIG_RAM_BOOT_PHYS PHYADDR(CONFIG_SYS_TEXT_BASE) - -#define SPIWDMADR 0xFE001018 -#define SPIWDMCNTR 0xFE001020 -#define SPIDMCOR 0xFE001028 -#define SPIDMINTSR 0xFE001188 -#define SPIDMINTMR 0xFE001190 - -#define SPIDMINTSR_DMEND 0x00000004 - -#define TBR 0xFE002000 -#define RBR 0xFE002000 - -#define CR1 0xFE002008 -#define CR2 0xFE002010 -#define CR3 0xFE002018 -#define CR4 0xFE002020 -#define CR7 0xFE002038 -#define CR8 0xFE002040 - -/* CR1 */ -#define SPI_TBE 0x80 -#define SPI_TBF 0x40 -#define SPI_RBE 0x20 -#define SPI_RBF 0x10 -#define SPI_PFONRD 0x08 -#define SPI_SSDB 0x04 -#define SPI_SSD 0x02 -#define SPI_SSA 0x01 - -/* CR2 */ -#define SPI_RSTF 0x80 -#define SPI_LOOPBK 0x40 -#define SPI_CPOL 0x20 -#define SPI_CPHA 0x10 -#define SPI_L1M0 0x08 - -/* CR4 */ -#define SPI_TBEI 0x80 -#define SPI_TBFI 0x40 -#define SPI_RBEI 0x20 -#define SPI_RBFI 0x10 -#define SPI_SpiS0 0x02 -#define SPI_SSS 0x01 - -/* CR7 */ -#define CR7_IDX_OR12 0x12 -#define OR12_ADDR32 0x00000001 - -#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val -#define spi_read(addr) (*(volatile unsigned long *)(addr)) - -/* M25P80 */ -#define M25_READ 0x03 -#define M25_READ_4BYTE 0x13 - -extern void bss_start(void); - -#define __uses_spiboot2 __attribute__((section(".spiboot2.text"))) -static void __uses_spiboot2 spi_reset(void) -{ - int timeout = 0x00100000; - - /* Make sure the last transaction is finalized */ - spi_write(0x00, CR3); - spi_write(0x02, CR1); - while (!(spi_read(CR4) & SPI_SpiS0)) { - if (timeout-- < 0) - break; - } - spi_write(0x00, CR1); - - spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */ - spi_write(spi_read(CR2) & ~SPI_RSTF, CR2); - - spi_write(0, SPIDMCOR); -} - -static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr, - unsigned long len) -{ - spi_write(CR7_IDX_OR12, CR7); - if (spi_read(CR8) & OR12_ADDR32) { - /* 4-bytes address mode */ - spi_write(M25_READ_4BYTE, TBR); - spi_write((addr >> 24) & 0xFF, TBR); /* ADDR31-24 */ - } else { - /* 3-bytes address mode */ - spi_write(M25_READ, TBR); - } - spi_write((addr >> 16) & 0xFF, TBR); /* ADDR23-16 */ - spi_write((addr >> 8) & 0xFF, TBR); /* ADDR15-8 */ - spi_write(addr & 0xFF, TBR); /* ADDR7-0 */ - - spi_write(SPIDMINTSR_DMEND, SPIDMINTSR); - spi_write((unsigned long)buf, SPIWDMADR); - spi_write(len & 0xFFFFFFE0, SPIWDMCNTR); - spi_write(1, SPIDMCOR); - - spi_write(0xff, CR3); - spi_write(spi_read(CR1) | SPI_SSDB, CR1); - spi_write(spi_read(CR1) | SPI_SSA, CR1); - - while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND)) - ; - - /* Nagate SP0-SS0 */ - spi_write(0, CR1); -} - -void __uses_spiboot2 spiboot_main(void) -{ - /* - * This code rounds len up for SPIWDMCNTR. We should set it to 0 in - * lower 5-bits. - */ - void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE; - volatile unsigned long len = (bss_start - _start + 31) & 0xffffffe0; - - spi_reset(); - spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR, len); - - _start(); -} diff --git a/configs/sh7753evb_defconfig b/configs/sh7753evb_defconfig deleted file mode 100644 index c1996607a0..0000000000 --- a/configs/sh7753evb_defconfig +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_SH=y -CONFIG_SYS_TEXT_BASE=0x5ff80000 -CONFIG_ENV_SIZE=0x10000 -CONFIG_TARGET_SH7753EVB=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttySC2,115200 root=/dev/nfs ip=dhcp" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -CONFIG_CMD_MD5SUM=y -# CONFIG_CMD_LOADB is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_SLEEP is not set -CONFIG_CMD_EXT2=y -CONFIG_MAC_PARTITION=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_VERSION_VARIABLE=y -CONFIG_MMC=y -CONFIG_SH_MMCIF=y -CONFIG_BITBANGMII=y -CONFIG_PHY_VITESSE=y -CONFIG_SH_ETHER=y -CONFIG_SCIF_CONSOLE=y -CONFIG_SPI=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/doc/board/index.rst b/doc/board/index.rst index 08c167b6b5..a70d2de19d 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -18,7 +18,6 @@ Board-specific doc intel/index kontron/index microchip/index - renesas/index rockchip/index sifive/index sipeed/index diff --git a/doc/board/renesas/index.rst b/doc/board/renesas/index.rst deleted file mode 100644 index 401ffcf61b..0000000000 --- a/doc/board/renesas/index.rst +++ /dev/null @@ -1,9 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0+ - -Renesas -======= - -.. toctree:: - :maxdepth: 2 - - sh7753evb diff --git a/doc/board/renesas/sh7753evb.rst b/doc/board/renesas/sh7753evb.rst deleted file mode 100644 index c62a82435c..0000000000 --- a/doc/board/renesas/sh7753evb.rst +++ /dev/null @@ -1,79 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0+ - -SH7753 EVB board -================ - -This board specification ------------------------- - -The SH7753 EVB (board config name:sh7753evb) has the following device: - - - SH7753 (SH-4A) - - DDR3-SDRAM 512MB - - SPI ROM 8MB - - Gigabit Ethernet controllers - - eMMC 4GB - - -Configuration for This board ----------------------------- - -You can select the configuration as follows: - - - make sh7753evb_config - - -This board specific command ---------------------------- - -This board has the following its specific command: - -write_mac: - You can write MAC address to SPI ROM. - -Usage 1: Write MAC address - -.. code-block:: none - - write_mac [GETHERC ch0] [GETHERC ch1] - - For example: - => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f - -* We have to input the command as a single line (without carriage return) -* We have to reset after input the command. - -Usage 2: Show current data - -.. code-block:: none - - write_mac - - For example: - => write_mac - GETHERC ch0 = 74:90:50:00:33:9e - GETHERC ch1 = 74:90:50:00:33:9f - - -Update SPI ROM --------------- - -1. Copy u-boot image to RAM area. -2. Probe SPI device. - -.. code-block:: none - - => sf probe 0 - SF: Detected MX25L6405D with page size 64KiB, total 8 MiB - -3. Erase SPI ROM. - -.. code-block:: none - - => sf erase 0 80000 - -4. Write u-boot image to SPI ROM. - -.. code-block:: none - - => sf write 0x48000000 0 80000 diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h deleted file mode 100644 index 736b379ab7..0000000000 --- a/include/configs/sh7753evb.h +++ /dev/null @@ -1,65 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the sh7753evb board - * - * Copyright (C) 2012 Renesas Solutions Corp. - */ - -#ifndef __SH7753EVB_H -#define __SH7753EVB_H - -#define CONFIG_CPU_SH7753 1 - -#define CONFIG_DISPLAY_BOARDINFO - -/* MEMORY */ -#define SH7753EVB_SDRAM_BASE (0x40000000) -#define SH7753EVB_SDRAM_SIZE (512 * 1024 * 1024) - -#define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* SCIF */ -#define CONFIG_CONS_SCIF2 1 - -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -#define CONFIG_SYS_SDRAM_BASE (SH7753EVB_SDRAM_BASE) -#define CONFIG_SYS_SDRAM_SIZE (SH7753EVB_SDRAM_SIZE) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \ - 128 * 1024 * 1024) - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 18 -#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1 -#define CONFIG_SH_ETHER_USE_GETHER 1 -#define CONFIG_BITBANGMII_MULTI -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII - -#define SH7753EVB_ETHERNET_MAC_BASE_SPI 0x00090000 -#define SH7753EVB_SPI_SECTOR_SIZE (64 * 1024) -#define SH7753EVB_ETHERNET_MAC_BASE SH7753EVB_ETHERNET_MAC_BASE_SPI -#define SH7753EVB_ETHERNET_MAC_SIZE 17 -#define SH7753EVB_ETHERNET_NUM_CH 2 - -/* SPI */ -#define CONFIG_SH_SPI_BASE 0xfe002000 - -/* MMCIF */ -#define CONFIG_SH_MMCIF_ADDR 0xffcb0000 -#define CONFIG_SH_MMCIF_CLK 48000000 - -/* ENV setting */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netboot=bootp; bootm\0" - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 48000000 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ -#endif /* __SH7753EVB_H */ -- 2.39.5