From 0203050e57f5e0ad6c696cb64cfbc01fd08b67c5 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 23 Jul 2019 15:33:30 +0200 Subject: [PATCH] ARM: dts: stih410-b2260: Sync DT with kernel v5.2 Synchronize U-boot DT with kernel v5.2 for stih410-b2260. Update stih410-b2260-u-boot.dtsi accordingly. Signed-off-by: Patrice Chotard --- arch/arm/dts/stih407-clock.dtsi | 113 ++++++------ arch/arm/dts/stih407-family.dtsi | 200 ++++++++++++---------- arch/arm/dts/stih407-pinctrl.dtsi | 129 +++++--------- arch/arm/dts/stih410-b2260-u-boot.dtsi | 17 ++ arch/arm/dts/stih410-b2260.dts | 128 +++++++------- arch/arm/dts/stih410-clock.dtsi | 110 ++++++------ arch/arm/dts/stih410-pinctrl.dtsi | 7 +- arch/arm/dts/stih410.dtsi | 227 ++++--------------------- 8 files changed, 370 insertions(+), 561 deletions(-) diff --git a/arch/arm/dts/stih407-clock.dtsi b/arch/arm/dts/stih407-clock.dtsi index 13029c03d7..1ab40db7c9 100644 --- a/arch/arm/dts/stih407-clock.dtsi +++ b/arch/arm/dts/stih407-clock.dtsi @@ -1,38 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics R&D Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include / { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; ranges; - /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - /* * A9 PLL. */ @@ -62,35 +53,22 @@ <&clockgen_a9_pll 0>, <&clk_s_c0_flexgen 13>, <&clk_m_a9_ext2f_div2>; - }; - /* - * ARM Peripheral clock for timers - */ - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_s_c0_flexgen 13>; - - clock-output-names = "clk-m-a9-ext2f-div2"; - - clock-div = <2>; - clock-mult = <1>; - }; + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; - /* - * Bootloader initialized system infrastructure clock for - * serial devices. - */ - clk_ext2f_a9: clockgen-c0@13 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - clock-output-names = "clk-s-icn-reg-0"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; }; - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -101,6 +79,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-a0-pll-ofd-0"; + clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */ }; clk_s_a0_flexgen: clk-s-a0-flexgen { @@ -112,6 +91,7 @@ <&clk_sysin>; clock-output-names = "clk-ic-lmi0"; + clock-critical = ; }; }; @@ -126,9 +106,10 @@ "clk-s-c0-fs0-ch1", "clk-s-c0-fs0-ch2", "clk-s-c0-fs0-ch3"; + clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -139,6 +120,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-c0-pll0-odf-0"; + clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */ }; clk_s_c0_pll1: clk-s-c0-pll1 { @@ -194,6 +176,27 @@ "clk-main-disp", "clk-aux-disp", "clk-compo-dvp"; + clock-critical = , + , + , + , + , + ; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; }; }; @@ -210,7 +213,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; @@ -244,13 +247,7 @@ "clk-s-d2-fs0-ch3"; }; - clk_tmdsout_hdmi: clk-tmdsout-hdmi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/dts/stih407-family.dtsi b/arch/arm/dts/stih407-family.dtsi index 6c6de58029..7c36c37260 100644 --- a/arch/arm/dts/stih407-family.dtsi +++ b/arch/arm/dts/stih407-family.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Giuseppe Cavallaro - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "stih407-pinctrl.dtsi" #include @@ -20,7 +17,13 @@ #size-cells = <1>; ranges; - dmu_reserved: rproc@44000000 { + gp0_reserved: rproc@45000000 { + compatible = "shared-dma-pool"; + reg = <0x45000000 0x00400000>; + no-map; + }; + + delta_reserved: rproc@44000000 { compatible = "shared-dma-pool"; reg = <0x44000000 0x01000000>; no-map; @@ -47,6 +50,7 @@ clocks = <&clk_m_a9>; clock-names = "cpu"; clock-latency = <100000>; + cpu0-supply = <&pwm_regulator>; st,syscfg = <&syscfg_core 0x8e0>; }; cpu@1 { @@ -65,19 +69,19 @@ }; }; - intc: interrupt-controller@08761000 { + intc: interrupt-controller@8761000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x08761000 0x1000>, <0x08760100 0x100>; }; - scu@08760000 { + scu@8760000 { compatible = "arm,cortex-a9-scu"; reg = <0x08760000 0x1000>; }; - timer@08760200 { + timer@8760200 { interrupt-parent = <&intc>; compatible = "arm,cortex-a9-global-timer"; reg = <0x08760200 0x100>; @@ -85,7 +89,7 @@ clocks = <&arm_periph_clk>; }; - l2: cache-controller { + l2: cache-controller@8762000 { compatible = "arm,pl310-cache"; reg = <0x08762000 0x1000>; arm,data-latency = <3 3 3>; @@ -118,24 +122,28 @@ ranges; compatible = "simple-bus"; - restart { + restart: restart-controller@0 { compatible = "st,stih407-restart"; + reg = <0 0>; st,syscfg = <&syscfg_sbc_reg>; status = "okay"; }; - powerdown: powerdown-controller { + powerdown: powerdown-controller@0 { compatible = "st,stih407-powerdown"; + reg = <0 0>; #reset-cells = <1>; }; - softreset: softreset-controller { + softreset: softreset-controller@0 { compatible = "st,stih407-softreset"; + reg = <0 0>; #reset-cells = <1>; }; - picophyreset: picophyreset-controller { + picophyreset: picophyreset-controller@0 { compatible = "st,stih407-picophyreset"; + reg = <0 0>; #reset-cells = <1>; }; @@ -167,6 +175,13 @@ syscfg_core: core-syscfg@92b0000 { compatible = "st,stih407-core-syscfg", "syscon"; reg = <0x92b0000 0x1000>; + + sti_sasg_codec: sti-sasg-codec { + compatible = "st,stih407-sas-codec"; + #sound-dai-cells = <1>; + status = "disabled"; + st,syscfg = <&syscfg_core>; + }; }; syscfg_lpm: lpm-syscfg@94b5100 { @@ -174,8 +189,9 @@ reg = <0x94b5100 0x1000>; }; - irq-syscfg { + irq-syscfg@0 { compatible = "st,stih407-irq-syscfg"; + reg = <0 0>; st,syscfg = <&syscfg_core>; st,irq-device = , ; @@ -187,22 +203,21 @@ vtg_main: sti-vtg-main@8d02800 { compatible = "st,vtg"; reg = <0x8d02800 0x200>; - interrupts = ; + interrupts = ; }; vtg_aux: sti-vtg-aux@8d00200 { compatible = "st,vtg"; reg = <0x8d00200 0x100>; - interrupts = ; + interrupts = ; }; serial@9830000 { compatible = "st,asc"; reg = <0x9830000 0x2c>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial0>; + interrupts = ; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + /* Pinctrl moved out to a per-board configuration */ status = "disabled"; }; @@ -210,7 +225,7 @@ serial@9831000 { compatible = "st,asc"; reg = <0x9831000 0x2c>; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial1>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; @@ -221,7 +236,7 @@ serial@9832000 { compatible = "st,asc"; reg = <0x9832000 0x2c>; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; @@ -233,7 +248,7 @@ sbc_serial0: serial@9530000 { compatible = "st,asc"; reg = <0x9530000 0x2c>; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial0>; clocks = <&clk_sysin>; @@ -244,7 +259,7 @@ serial@9531000 { compatible = "st,asc"; reg = <0x9531000 0x2c>; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; clocks = <&clk_sysin>; @@ -374,8 +389,9 @@ status = "disabled"; }; - usb2_picophy0: phy1 { + usb2_picophy0: phy1@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0x100 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -383,12 +399,13 @@ reset-names = "global", "port"; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp@0 { compatible = "st,miphy28lp-phy"; st,syscfg = <&syscfg_core>; #address-cells = <1>; #size-cells = <1>; ranges; + reg = <0 0>; phy_port0: port@9b22000 { reg = <0x9b22000 0xff>, @@ -458,6 +475,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -470,6 +489,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -482,6 +503,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi3_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -494,6 +517,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -507,6 +532,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi10_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -519,6 +546,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi11_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -531,16 +560,18 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi12_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { compatible = "st,sdhci-stih407", "st,sdhci"; status = "disabled"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; - interrupts = ; + interrupts = ; interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0>; @@ -550,12 +581,12 @@ bus-width = <8>; }; - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { compatible = "st,sdhci-stih407", "st,sdhci"; status = "disabled"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; - interrupts = ; + interrupts = ; interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd1>; @@ -563,7 +594,6 @@ clocks = <&clk_s_c0_flexgen CLK_MMC_1>, <&clk_s_c0_flexgen CLK_RX_ICN_HVA>; resets = <&softreset STIH407_MMC1_SOFTRESET>; - reset-names = "softreset"; bus-width = <4>; }; @@ -590,7 +620,7 @@ compatible = "st,ahci"; reg = <0x9b20000 0x1000>; - interrupts = ; + interrupts = ; interrupt-names = "hostc"; phys = <&phy_port0 PHY_TYPE_SATA>; @@ -613,7 +643,7 @@ compatible = "st,ahci"; reg = <0x9b28000 0x1000>; - interrupts = ; + interrupts = ; interrupt-names = "hostc"; phys = <&phy_port1 PHY_TYPE_SATA>; @@ -654,11 +684,12 @@ dwc3: dwc3@9900000 { compatible = "snps,dwc3"; reg = <0x09900000 0x100000>; - interrupts = ; - dr_mode = "peripheral"; + interrupts = ; + dr_mode = "host"; phy-names = "usb2-phy", "usb3-phy"; phys = <&usb2_picophy0>, <&phy_port2 PHY_TYPE_USB3>; + snps,dis_u3_susphy_quirk; }; }; @@ -667,7 +698,7 @@ compatible = "st,sti-pwm"; #pwm-cells = <2>; reg = <0x9810000 0x68>; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_chan0_default>; clock-names = "pwm"; @@ -682,6 +713,7 @@ compatible = "st,sti-pwm"; #pwm-cells = <2>; reg = <0x9510000 0x68>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1_chan0_default &pinctrl_pwm1_chan1_default @@ -694,14 +726,14 @@ status = "disabled"; }; - rng10: rng@08a89000 { + rng10: rng@8a89000 { compatible = "st,rng"; reg = <0x08a89000 0x1000>; clocks = <&clk_sysin>; status = "okay"; }; - rng11: rng@08a8a000 { + rng11: rng@8a8a000 { compatible = "st,rng"; reg = <0x08a8a000 0x1000>; clocks = <&clk_sysin>; @@ -720,8 +752,8 @@ resets = <&softreset STIH407_ETH1_SOFTRESET>; reset-names = "stmmaceth"; - interrupts = , - ; + interrupts = , + ; interrupt-names = "macirq", "eth_wake_irq"; /* DMA Bus Mode */ @@ -735,26 +767,14 @@ <&clk_s_c0_flexgen CLK_ETH_PHY>; }; - cec: sti-cec@094a087c { - compatible = "st,stih-cec"; - reg = <0x94a087c 0x64>; - clocks = <&clk_sysin>; - clock-names = "cec-clk"; - interrupts = ; - interrupt-names = "cec-irq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cec0_default>; - resets = <&softreset STIH407_LPM_SOFTRESET>; - }; - - rng10: rng@08a89000 { + rng10: rng@8a89000 { compatible = "st,rng"; reg = <0x08a89000 0x1000>; clocks = <&clk_sysin>; status = "okay"; }; - rng11: rng@08a8a000 { + rng11: rng@8a8a000 { compatible = "st,rng"; reg = <0x08a8a000 0x1000>; clocks = <&clk_sysin>; @@ -764,7 +784,7 @@ mailbox0: mailbox@8f00000 { compatible = "st,stih407-mailbox"; reg = <0x8f00000 0x1000>; - interrupts = ; + interrupts = ; #mbox-cells = <2>; mbox-name = "a9"; status = "okay"; @@ -794,9 +814,24 @@ status = "okay"; }; - st231_delta: st231-delta@44000000 { + st231_gp0: st231-gp0@0 { compatible = "st,st231-rproc"; - memory-region = <&dmu_reserved>; + reg = <0 0>; + memory-region = <&gp0_reserved>; + resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x22c>; + #mbox-cells = <1>; + mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; + mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>; + }; + + st231_delta: st231-delta@0 { + compatible = "st,st231-rproc"; + reg = <0 0>; + memory-region = <&delta_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; @@ -819,7 +854,7 @@ <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; - interrupts = ; + interrupts = ; dma-channels = <16>; #dma-cells = <3>; }; @@ -837,9 +872,11 @@ <&clk_s_c0_flexgen CLK_TX_ICN_DMU>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; - interrupts = ; + interrupts = ; dma-channels = <16>; #dma-cells = <3>; + + status = "disabled"; }; /* fdma free running */ @@ -850,20 +887,15 @@ <0x8e77000 0x1000>, <0x8e78000 0x8000>; reg-names = "slimcore", "dmem", "peripherals", "imem"; - interrupts = ; + interrupts = ; dma-channels = <16>; #dma-cells = <3>; clocks = <&clk_s_c0_flexgen CLK_FDMA>, <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; - }; - sti_sasg_codec: sti-sasg-codec { - compatible = "st,stih407-sas-codec"; - #sound-dai-cells = <1>; status = "disabled"; - st,syscfg = <&syscfg_core>; }; sti_uni_player0: sti-uni-player@8d80000 { @@ -875,7 +907,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>; assigned-clock-rates = <50000000>; reg = <0x8d80000 0x158>; - interrupts = ; + interrupts = ; dmas = <&fdma0 2 0 1>; dma-names = "tx"; @@ -891,7 +923,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>; assigned-clock-rates = <50000000>; reg = <0x8d81000 0x158>; - interrupts = ; + interrupts = ; dmas = <&fdma0 3 0 1>; dma-names = "tx"; @@ -907,7 +939,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>; assigned-clock-rates = <50000000>; reg = <0x8d82000 0x158>; - interrupts = ; + interrupts = ; dmas = <&fdma0 4 0 1>; dma-names = "tx"; @@ -923,7 +955,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>; assigned-clock-rates = <50000000>; reg = <0x8d85000 0x158>; - interrupts = ; + interrupts = ; dmas = <&fdma0 7 0 1>; dma-names = "tx"; @@ -935,7 +967,7 @@ #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d83000 0x158>; - interrupts = ; + interrupts = ; dmas = <&fdma0 5 0 1>; dma-names = "rx"; @@ -947,32 +979,22 @@ #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d84000 0x158>; - interrupts = ; + interrupts = ; dmas = <&fdma0 6 0 1>; dma-names = "rx"; status = "disabled"; }; - rc: rc@09518000 { - compatible = "st,comms-irb"; - reg = <0x09518000 0x234>; - interrupts = ; - rx-mode = "infrared"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ir - &pinctrl_uhf - &pinctrl_tx - &pinctrl_tx_od>; - clocks = <&clk_sysin>; - resets = <&softreset STIH407_IRB_SOFTRESET>; - - status = "disabled"; - }; - - socinfo { - compatible = "st,stih407-socinfo"; - st,syscfg = <&syscfg_core>; + delta0@0 { + compatible = "st,st-delta"; + reg = <0 0>; + clock-names = "delta", + "delta-st231", + "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; }; }; }; diff --git a/arch/arm/dts/stih407-pinctrl.dtsi b/arch/arm/dts/stih407-pinctrl.dtsi index f27ae21f67..2cf335714c 100644 --- a/arch/arm/dts/stih407-pinctrl.dtsi +++ b/arch/arm/dts/stih407-pinctrl.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Giuseppe Cavallaro - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "st-pincfg.h" #include @@ -45,18 +42,18 @@ }; soc { - pin-controller-sbc { + pin-controller-sbc@961f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-sbc-pinctrl"; st,syscfg = <&syscfg_sbc>; reg = <0x0961f080 0x4>; reg-names = "irqmux"; - interrupts = ; + interrupts = ; interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; - pio0: gpio@09610000 { + pio0: gpio@9610000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -64,7 +61,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO0"; }; - pio1: gpio@09611000 { + pio1: gpio@9611000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -72,7 +69,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO1"; }; - pio2: gpio@09612000 { + pio2: gpio@9612000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -80,7 +77,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO2"; }; - pio3: gpio@09613000 { + pio3: gpio@9613000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -88,7 +85,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO3"; }; - pio4: gpio@09614000 { + pio4: gpio@9614000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -97,7 +94,7 @@ st,bank-name = "PIO4"; }; - pio5: gpio@09615000 { + pio5: gpio@9615000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -369,18 +366,18 @@ }; }; - pin-controller-front0 { + pin-controller-front0@920f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-front-pinctrl"; st,syscfg = <&syscfg_front>; reg = <0x0920f080 0x4>; reg-names = "irqmux"; - interrupts = ; + interrupts = ; interrupt-names = "irqmux"; ranges = <0 0x09200000 0x10000>; - pio10: pio@09200000 { + pio10: pio@9200000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -388,7 +385,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO10"; }; - pio11: pio@09201000 { + pio11: pio@9201000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -396,7 +393,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO11"; }; - pio12: pio@09202000 { + pio12: pio@9202000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -404,7 +401,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO12"; }; - pio13: pio@09203000 { + pio13: pio@9203000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -412,7 +409,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO13"; }; - pio14: pio@09204000 { + pio14: pio@9204000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -420,7 +417,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO14"; }; - pio15: pio@09205000 { + pio15: pio@9205000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -428,7 +425,7 @@ reg = <0x5000 0x100>; st,bank-name = "PIO15"; }; - pio16: pio@09206000 { + pio16: pio@9206000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -436,7 +433,7 @@ reg = <0x6000 0x100>; st,bank-name = "PIO16"; }; - pio17: pio@09207000 { + pio17: pio@9207000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -444,7 +441,7 @@ reg = <0x7000 0x100>; st,bank-name = "PIO17"; }; - pio18: pio@09208000 { + pio18: pio@9208000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -452,7 +449,7 @@ reg = <0x8000 0x100>; st,bank-name = "PIO18"; }; - pio19: pio@09209000 { + pio19: pio@9209000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -465,19 +462,16 @@ serial0 { pinctrl_serial0: serial0-0 { st,pins { - tx = <&pio17 0 ALT1 OUT>; - rx = <&pio17 1 ALT1 IN>; + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; }; }; - pinctrl_serial0_rts: serial0_rts { - st,pins { - rts = <&pio17 3 ALT1 OUT>; - }; - }; - - pinctrl_serial0_cts: serial0_cts { + pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl { st,pins { + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; cts = <&pio17 2 ALT1 IN>; + rts = <&pio17 3 ALT1 OUT>; }; }; }; @@ -932,18 +926,18 @@ }; }; - pin-controller-front1 { + pin-controller-front1@921f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-front-pinctrl"; st,syscfg = <&syscfg_front>; reg = <0x0921f080 0x4>; reg-names = "irqmux"; - interrupts = ; + interrupts = ; interrupt-names = "irqmux"; ranges = <0 0x09210000 0x10000>; - pio20: pio@09210000 { + pio20: pio@9210000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -965,18 +959,18 @@ }; }; - pin-controller-rear { + pin-controller-rear@922f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-rear-pinctrl"; st,syscfg = <&syscfg_rear>; reg = <0x0922f080 0x4>; reg-names = "irqmux"; - interrupts = ; + interrupts = ; interrupt-names = "irqmux"; ranges = <0 0x09220000 0x6000>; - pio30: gpio@09220000 { + pio30: gpio@9220000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -984,7 +978,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO30"; }; - pio31: gpio@09221000 { + pio31: gpio@9221000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -992,7 +986,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO31"; }; - pio32: gpio@09222000 { + pio32: gpio@9222000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1000,7 +994,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO32"; }; - pio33: gpio@09223000 { + pio33: gpio@9223000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1008,7 +1002,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO33"; }; - pio34: gpio@09224000 { + pio34: gpio@9224000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1016,7 +1010,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO34"; }; - pio35: gpio@09225000 { + pio35: gpio@9225000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1026,41 +1020,6 @@ st,retime-pin-mask = <0x7f>; }; - dvo { - pinctrl_dvo: dvo { - st,pins { - hs = <&pio30 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - vs = <&pio30 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - de = <&pio30 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - ck = <&pio30 3 ALT2 (OE | CLKNOTDATA) 0>; - d0 = <&pio30 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d1 = <&pio30 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d2 = <&pio30 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d3 = <&pio30 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d4 = <&pio31 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d5 = <&pio31 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d6 = <&pio31 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d7 = <&pio31 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d8 = <&pio31 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d9 = <&pio31 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d10 = <&pio31 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d11 = <&pio31 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d12 = <&pio32 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d13 = <&pio32 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d14 = <&pio32 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d15 = <&pio32 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d16 = <&pio32 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d17 = <&pio32 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d18 = <&pio32 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d19 = <&pio32 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d20 = <&pio33 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d21 = <&pio33 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d22 = <&pio33 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d23 = <&pio33 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - }; - }; - }; - i2c4 { pinctrl_i2c4_default: i2c4-default { st,pins { @@ -1195,18 +1154,18 @@ }; }; - pin-controller-flash { + pin-controller-flash@923f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-flash-pinctrl"; st,syscfg = <&syscfg_flash>; reg = <0x0923f080 0x4>; reg-names = "irqmux"; - interrupts = ; - interrupts-names = "irqmux"; + interrupts = ; + interrupt-names = "irqmux"; ranges = <0 0x09230000 0x3000>; - pio40: gpio@09230000 { + pio40: gpio@9230000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1214,7 +1173,7 @@ reg = <0 0x100>; st,bank-name = "PIO40"; }; - pio41: gpio@09231000 { + pio41: gpio@9231000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1222,7 +1181,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO41"; }; - pio42: gpio@09232000 { + pio42: gpio@9232000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/dts/stih410-b2260-u-boot.dtsi b/arch/arm/dts/stih410-b2260-u-boot.dtsi index 83916319fc..897c42146a 100644 --- a/arch/arm/dts/stih410-b2260-u-boot.dtsi +++ b/arch/arm/dts/stih410-b2260-u-boot.dtsi @@ -9,8 +9,25 @@ soc { st_dwc3: dwc3@8f94000 { dwc3: dwc3@9900000 { + dr_mode = "peripheral"; phys = <&usb2_picophy0>; }; }; + + ohci0: usb@9a03c00 { + compatible = "generic-ohci"; + }; + + ehci0: usb@9a03e00 { + compatible = "generic-ehci"; + }; + + ohci1: usb@9a83c00 { + compatible = "generic-ohci"; + }; + + ehci1: usb@9a83e00 { + compatible = "generic-ehci"; + }; }; }; diff --git a/arch/arm/dts/stih410-b2260.dts b/arch/arm/dts/stih410-b2260.dts index 54250e2518..4fbd8e9eb5 100644 --- a/arch/arm/dts/stih410-b2260.dts +++ b/arch/arm/dts/stih410-b2260.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 STMicroelectronics (R&D) Limited. * Author: Patrice Chotard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; #include "stih410.dtsi" @@ -15,68 +12,79 @@ compatible = "st,stih410-b2260", "st,stih410"; chosen { - bootargs = "console=ttyAS1,115200"; - linux,stdout-path = &uart1; + bootargs = "clk_ignore_unused"; stdout-path = &uart1; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x40000000>; }; aliases { - ttyAS1 = &uart1; + serial1 = &uart1; ethernet0 = ðernet0; }; - soc { - - leds { - compatible = "gpio-leds"; - user_green_1 { - label = "User_green_1"; - gpios = <&pio1 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; + leds { + compatible = "gpio-leds"; + user_green_1 { + label = "User_green_1"; + gpios = <&pio1 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; - user_green_2 { - label = "User_green_2"; - gpios = <&pio4 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_2 { + label = "User_green_2"; + gpios = <&pio4 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; - user_green_3 { - label = "User_green_3"; - gpios = <&pio2 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_3 { + label = "User_green_3"; + gpios = <&pio2 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; - user_green_4 { - label = "User_green_4"; - gpios = <&pio2 5 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_4 { + label = "User_green_4"; + gpios = <&pio2 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; - wifi_yellow { - label = "Wifi_yellow"; - gpios = <&pio4 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "wifi-activity"; - default-state = "off"; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "STI-B2260"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + /* DAC */ + format = "i2s"; + mclk-fs = <128>; + cpu { + sound-dai = <&sti_uni_player0>; }; - bt_blue { - label = "Bluetooth_blue"; - gpios = <&pio3 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "hci0-power"; - default-state = "off"; + codec { + sound-dai = <&sti_hdmi>; }; }; + }; + soc { /* Low speed expansion connector */ uart0: serial@9830000 { label = "LS-UART0"; + pinctrl-names = "default", "no-hw-flowctrl"; + pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>; + pinctrl-1 = <&pinctrl_serial0>; + rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -119,14 +127,14 @@ status = "okay"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { pinctrl-0 = <&pinctrl_sd0>; bus-width = <4>; status = "okay"; }; /* high speed expansion connector */ - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { status = "okay"; }; @@ -138,11 +146,11 @@ status = "okay"; }; - usb2_picophy1: phy2 { + usb2_picophy1: phy2@0 { status = "okay"; }; - usb2_picophy2: phy3 { + usb2_picophy2: phy3@0 { status = "okay"; }; @@ -183,17 +191,17 @@ sti_uni_player0: sti-uni-player@8d80000 { status = "okay"; }; - /* SSC11 to HDMI */ hdmiddc: i2c@9541000 { /* HDMI V1.3a supports Standard mode only */ clock-frequency = <100000>; st,i2c-min-scl-pulse-width-us = <0>; - st,i2c-min-sda-pulse-width-us = <1>; + st,i2c-min-sda-pulse-width-us = <5>; status = "okay"; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp@0 { + phy_port1: port@9b2a000 { st,osc-force-ext; }; @@ -202,25 +210,5 @@ sata1: sata@9b28000 { status = "okay"; }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "STI-B2260"; - status = "okay"; - - simple-audio-card,dai-link@0 { - /* DAC */ - format = "i2s"; - mclk-fs = <128>; - cpu { - sound-dai = <&sti_uni_player0>; - }; - - codec { - sound-dai = <&sti_hdmi>; - }; - }; - }; - }; }; diff --git a/arch/arm/dts/stih410-clock.dtsi b/arch/arm/dts/stih410-clock.dtsi index 8598effd6c..81a8c25d7b 100644 --- a/arch/arm/dts/stih410-clock.dtsi +++ b/arch/arm/dts/stih410-clock.dtsi @@ -1,12 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics R&D Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include / { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + clock-output-names = "CLK_SYSIN"; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -14,27 +27,6 @@ compatible = "st,stih410-clk", "simple-bus"; - /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - clock-output-names = "CLK_SYSIN"; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - /* * A9 PLL. */ @@ -64,35 +56,19 @@ <&clockgen_a9_pll 0>, <&clk_s_c0_flexgen 13>, <&clk_m_a9_ext2f_div2>; + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; }; - /* - * ARM Peripheral clock for timers - */ - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_s_c0_flexgen 13>; - - clock-output-names = "clk-m-a9-ext2f-div2"; - - clock-div = <2>; - clock-mult = <1>; - }; - - /* - * Bootloader initialized system infrastructure clock for - * serial devices. - */ - clk_ext2f_a9: clockgen-c0@13 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - clock-output-names = "clk-s-icn-reg-0"; - }; - - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -134,7 +110,7 @@ clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -208,11 +184,27 @@ "clk-clust-hades", "clk-hwpe-hades", "clk-fc-hades"; - clock-critical = , + clock-critical = , + , , , , ; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; }; }; @@ -229,7 +221,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; @@ -265,13 +257,7 @@ "clk-s-d2-fs0-ch3"; }; - clk_tmdsout_hdmi: clk-tmdsout-hdmi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/dts/stih410-pinctrl.dtsi b/arch/arm/dts/stih410-pinctrl.dtsi index b3e9dfc81c..e6eadd1244 100644 --- a/arch/arm/dts/stih410-pinctrl.dtsi +++ b/arch/arm/dts/stih410-pinctrl.dtsi @@ -1,16 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Peter Griffin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "st-pincfg.h" / { soc { - pin-controller-rear { + pin-controller-rear@922f080 { usb0 { pinctrl_usb0: usb2-0 { diff --git a/arch/arm/dts/stih410.dtsi b/arch/arm/dts/stih410.dtsi index b59b110989..6d847019c5 100644 --- a/arch/arm/dts/stih410.dtsi +++ b/arch/arm/dts/stih410.dtsi @@ -1,67 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Peter Griffin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "stih410-clock.dtsi" #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" +#include / { aliases { bdisp0 = &bdisp0; }; - cpus { - cpu@0 { - st,syscfg = <&syscfg_core 0x8e0>; - st,syscfg-eng = <&syscfg_opp 0x4 0x0>; - clocks = <&clk_m_a9>; - operating-points-v2 = <&cpu0_opp_table>; - }; - cpu@1 { - clocks = <&clk_m_a9>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp@1500000000 { - opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>; - opp-hz = /bits/ 64 <1500000000>; - clock-latency-ns = <10000000>; - opp-suspend; - }; - opp@1200000000 { - opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>; - opp-hz = /bits/ 64 <1200000000>; - clock-latency-ns = <10000000>; - }; - opp@800000000 { - opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>; - opp-hz = /bits/ 64 <800000000>; - clock-latency-ns = <10000000>; - }; - opp@400000000 { - opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>; - opp-hz = /bits/ 64 <400000000>; - clock-latency-ns = <10000000>; - }; - }; - soc { - syscfg_opp: @08a6583c { - compatible = "syscon"; - reg = <0x08a6583c 0x8>; - }; - - usb2_picophy1: phy2 { + usb2_picophy1: phy2@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0xf8 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -71,8 +25,9 @@ status = "disabled"; }; - usb2_picophy2: phy3 { + usb2_picophy2: phy3@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0xfc 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -83,15 +38,14 @@ }; ohci0: usb@9a03c00 { - compatible = "generic-ohci"; + compatible = "st,st-ohci-300x"; reg = <0x9a03c00 0x100>; - interrupts = ; + interrupts = ; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, <&softreset STIH407_USB2_PORT0_SOFTRESET>; reset-names = "power", "softreset"; - phys = <&usb2_picophy1>; phy-names = "usb"; @@ -99,9 +53,9 @@ }; ehci0: usb@9a03e00 { - compatible = "generic-ehci"; + compatible = "st,st-ehci-300x"; reg = <0x9a03e00 0x100>; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, @@ -116,15 +70,14 @@ }; ohci1: usb@9a83c00 { - compatible = "generic-ohci"; + compatible = "st,st-ohci-300x"; reg = <0x9a83c00 0x100>; - interrupts = ; + interrupts = ; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; reset-names = "power", "softreset"; - phys = <&usb2_picophy2>; phy-names = "usb"; @@ -132,9 +85,9 @@ }; ehci1: usb@9a83e00 { - compatible = "generic-ehci"; + compatible = "st,st-ehci-300x"; reg = <0x9a83e00 0x100>; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, @@ -142,18 +95,18 @@ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; reset-names = "power", "softreset"; - phys = <&usb2_picophy2>; phy-names = "usb"; status = "disabled"; }; - sti-display-subsystem { + sti-display-subsystem@0 { compatible = "st,sti-display-subsystem"; #address-cells = <1>; #size-cells = <1>; + reg = <0 0>; assigned-clocks = <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>, <&clk_s_c0_pll1 0>, @@ -243,10 +196,10 @@ sti_hdmi: sti-hdmi@8d04000 { compatible = "st,stih407-hdmi"; - #sound-dai-cells = <0>; reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; - interrupts = ; + #sound-dai-cells = <0>; + interrupts = ; interrupt-names = "irq"; clock-names = "pix", "tmds", @@ -262,7 +215,7 @@ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; - hdmi,hpd-gpio = <&pio5 3>; + hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>; reset-names = "hdmi"; resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; ddc = <&hdmiddc>; @@ -283,24 +236,7 @@ <&clk_s_d2_quadfs 1>; }; - sti-dvo@8d00400 { - compatible = "st,stih407-dvo"; - status = "disabled"; - reg = <0x8d00400 0x200>; - reg-names = "dvo-reg"; - clock-names = "dvo_pix", - "dvo", - "main_parent", - "aux_parent"; - clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, - <&clk_s_d2_flexgen CLK_DVO>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dvo>; - }; - - sti-hqvdp@9c000000 { + sti-hqvdp@9c00000 { compatible = "st,stih407-hqvdp"; reg = <0x9C00000 0x100000>; clock-names = "hqvdp", "pix_main"; @@ -315,7 +251,7 @@ bdisp0:bdisp@9f10000 { compatible = "st,stih407-bdisp"; reg = <0x9f10000 0x1000>; - interrupts = ; + interrupts = ; clock-names = "bdisp"; clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; }; @@ -324,8 +260,8 @@ compatible = "st,st-hva"; reg = <0x8c85000 0x400>, <0x6000000 0x40000>; reg-names = "hva_registers", "hva_esram"; - interrupts = , - ; + interrupts = , + ; clock-names = "clk_hva"; clocks = <&clk_s_c0_flexgen CLK_HVA>; }; @@ -338,66 +274,7 @@ interrupts = ; }; - g1@8c80000 { - compatible = "st,g1"; - reg = <0x8c80000 0x194>; - interrupts = ; - }; - - temp0{ - compatible = "st,stih407-thermal"; - reg = <0x91a0000 0x28>; - clock-names = "thermal"; - clocks = <&clk_sysin>; - interrupts = ; - }; - - delta0 { - compatible = "st,delta"; - clock-names = "delta", "delta-st231", "delta-flash-promip"; - clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, - <&clk_s_c0_flexgen CLK_ST231_DMU>, - <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; - }; - - h264pp0: h264pp@8c00000 { - compatible = "st,h264pp"; - reg = <0x8c00000 0x20000>; - interrupts = ; - clock-names = "clk_h264pp_0"; - clocks = <&clk_s_c0_flexgen CLK_PP_DMU>; - }; - - mali: mali@09f00000 { - compatible = "arm,mali-400"; - reg = <0x09f00000 0x10000>; - interrupts = , - , - , - , - , - , - , - , - , - ; - interrupt-names = "IRQGP", - "IRQGPMMU", - "IRQPP0", - "IRQPPMMU0", - "IRQPP1", - "IRQPPMMU1", - "IRQPP2", - "IRQPPMMU2", - "IRQPP3", - "IRQPPMMU3"; - clock-names = "gpu-clk"; - clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>; - reset-names = "gpu"; - resets = <&softreset STIH407_GPU_SOFTRESET>; - }; - - delta0 { + delta0@0 { compatible = "st,st-delta"; clock-names = "delta", "delta-st231", @@ -407,51 +284,17 @@ <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; }; - h264pp0: h264pp@8c00000 { - compatible = "st,h264pp"; - reg = <0x8c00000 0x20000>; - interrupts = ; - clock-names = "clk_h264pp_0"; - clocks = <&clk_s_c0_flexgen CLK_PP_DMU>; - }; - - mali: mali@09f00000 { - compatible = "arm,mali-400"; - reg = <0x09f00000 0x10000>; - interrupts = , - , - , - , - , - , - , - , - , - ; - interrupt-names = "IRQGP", - "IRQGPMMU", - "IRQPP0", - "IRQPPMMU0", - "IRQPP1", - "IRQPPMMU1", - "IRQPP2", - "IRQPPMMU2", - "IRQPP3", - "IRQPPMMU3"; - clock-names = "gpu-clk"; - clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>; - reset-names = "gpu"; - resets = <&softreset STIH407_GPU_SOFTRESET>; - }; - - hva@8c85000{ - compatible = "st,st-hva"; - reg = <0x8c85000 0x400>, <0x6000000 0x40000>; - reg-names = "hva_registers", "hva_esram"; - interrupts = , - ; - clock-names = "clk_hva"; - clocks = <&clk_s_c0_flexgen CLK_HVA>; + sti-cec@94a087c { + compatible = "st,stih-cec"; + reg = <0x94a087c 0x64>; + clocks = <&clk_sysin>; + clock-names = "cec-clk"; + interrupts = ; + interrupt-names = "cec-irq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cec0_default>; + resets = <&softreset STIH407_LPM_SOFTRESET>; + hdmi-phandle = <&sti_hdmi>; }; }; }; -- 2.39.5