]> git.dujemihanovic.xyz Git - u-boot.git/log
u-boot.git
14 years agodrivers/mtd/spi/eeprom_m95xxx.c: add missing error checking
Albin Tonnerre [Sun, 14 Mar 2010 17:47:23 +0000 (18:47 +0100)]
drivers/mtd/spi/eeprom_m95xxx.c: add missing error checking

Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-ubi
Wolfgang Denk [Fri, 9 Apr 2010 19:49:42 +0000 (21:49 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ubi

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-usb
Wolfgang Denk [Fri, 9 Apr 2010 19:42:18 +0000 (21:42 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-usb

14 years agocmd_ubi: Fix uninitialized variable warning
Peter Tyser [Mon, 5 Apr 2010 03:40:50 +0000 (22:40 -0500)]
cmd_ubi: Fix uninitialized variable warning

gcc 3.4.6 previously reported the following error on many MIPS boards
which utilize UBI:
  cmd_ubi.c:193: warning: 'vol' might be used uninitialized in this function

The current code is structured such that 'vol' will never be used when
it is NULL anyway, but gcc isn't smart enough to figure this out.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
14 years agoUSB storage probe
Kim B. Heino [Fri, 12 Mar 2010 08:07:00 +0000 (10:07 +0200)]
USB storage probe

While debugging one ill behaving USB device I found two bugs in USB
storage probe.

usb_stor_get_info() returns -1 (error), 0 (skip) or 1 (ok). First part
of this patch fixes error case.

Second part fixes usb_inquiry()'s retry counter handling. Original code
had retry = -1 on error case, not retry = 0 as checked in the next line.

Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
14 years agoUSB storage count
Kim B. Heino [Fri, 12 Mar 2010 13:46:56 +0000 (15:46 +0200)]
USB storage count

Here's another USB storage patch. Currently U-Boot handles storage
devices #0 - #4 as valid devices, even if there is none connected. This
patch fixes usb_stor_get_dev() to check detected device count instead
of MAX-define.

This is very important for ill behaving devices. usb_dev_desc[] can be
partially initialized if device probe fails.

After fixing get_dev() it was easy to fix "usb part" etc commands.
Previously it outputed "Unknown partition table" five times, now it's
"no USB devices available".

Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
14 years agoEHCI: add NEC PCI ID
Sergei Shtylyov [Sat, 27 Feb 2010 18:34:41 +0000 (21:34 +0300)]
EHCI: add NEC PCI ID

Add NEC EHCI controller to the list of the supported devices.

Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
 drivers/usb/host/ehci-pci.c |    1 +
 1 file changed, 1 insertion(+)

14 years agoEHCI: fix port reset reporting
Sergei Shtylyov [Sat, 27 Feb 2010 18:33:21 +0000 (21:33 +0300)]
EHCI: fix port reset reporting

Commit b416191a14770c6bcc6fd67be7decf8159b2baee (Fix EHCI port reset.) didn't
move the code that checked for successful clearing of the port reset bit from
ehci_submit_root(), relying on wait_ms() call instead. The mentioned code also
erroneously reported port reset state when the reset was already completed.

Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
14 years agoEHCI: fix off-by-one error in ehci_submit_root()
Sergei Shtylyov [Sat, 27 Feb 2010 18:32:17 +0000 (21:32 +0300)]
EHCI: fix off-by-one error in ehci_submit_root()

USB devices on the 2nd port are not detected and I get the following message:

The request port(1) is not configured

That's with default CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS value of 2. 'req->index'
is 1-based, so the comparison in ehci_submit_root() can't be correct.

Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
14 years agoEHCI: fix root hub device descriptor
Sergei Shtylyov [Sat, 27 Feb 2010 18:29:42 +0000 (21:29 +0300)]
EHCI: fix root hub device descriptor

On little endian machines, EHCI root hub's USB revision is reported as 0.2 --
cpu_to_le16() was missed in the initializer for the 'bcdUSB' descriptor field.
The same should be done for the 'bcdDevice' field.

Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
14 years agovideo: ati_radeon_fb.c: fix warning while compiling with DEBUG
Anatolij Gustschin [Thu, 8 Apr 2010 13:50:55 +0000 (15:50 +0200)]
video: ati_radeon_fb.c: fix warning while compiling with DEBUG

Fixes this warning:

ati_radeon_fb.c: In function 'radeon_probe':
ati_radeon_fb.c:598: warning: format '%x' expects type 'unsigned int',
but argument 2 has type 'void *'

Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agoati_radeon: Support PCI virtual not eq bus mapping.
Ed Swarthout [Wed, 31 Mar 2010 20:52:40 +0000 (15:52 -0500)]
ati_radeon: Support PCI virtual not eq bus mapping.

Use pci_bus_to_virt() to convert the bus address from the BARs to
virtual address' to eliminate the direct mapping requirement.

Rename variables to better match usage (_phys -> _bus or no-suffix)

This fixes the mpc8572ds CONFIG_PHYS_64BIT mode failure:
"videoboot: Video ROM failed to map!"

Tested on mpc8572ds with and without CONFIG_PHYS_64BIT.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14 years agoati_radeon: return with error when emulator fails
Ed Swarthout [Wed, 31 Mar 2010 14:54:28 +0000 (09:54 -0500)]
ati_radeon: return with error when emulator fails

Console was being switched to video even if emulator fails and
causing this hang:

               Scanning PCI bus 04
        04  00  1095  3132  0104  00
    PCIE3 on bus 03 - 04
Video: ATI Radeon video card (1002, 5b60) found @(2:0:0)
videoboot: Booting PCI video card bus 2, function 0, device 0
videoboot: Video ROM failed to map!
640x480x8 31kHz 59Hz
radeonfb: FIFO Timeout !

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Tested-by: Anatolij Gustschin <agust@denx.de>
14 years agovideo: cfb_console.c: add support for RLE8 bitmaps
Anatolij Gustschin [Mon, 15 Mar 2010 13:50:25 +0000 (14:50 +0100)]
video: cfb_console.c: add support for RLE8 bitmaps

Allow displaying 8-bit RLE BMP images.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-cfi-flash
Wolfgang Denk [Wed, 7 Apr 2010 22:26:03 +0000 (00:26 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Wed, 7 Apr 2010 22:23:11 +0000 (00:23 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-i2c
Wolfgang Denk [Wed, 7 Apr 2010 22:15:11 +0000 (00:15 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Wed, 7 Apr 2010 22:06:31 +0000 (00:06 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

14 years agocfi_flash: reset timer in flash status check
Thomas Chou [Thu, 1 Apr 2010 03:15:05 +0000 (11:15 +0800)]
cfi_flash: reset timer in flash status check

This patch adds reset_timer() before the flash status check
waiting loop.

Since the timer is basically running asynchronous to the cfi
code, it is possible to call get_timer(0), then only a few
_SYSCLK_ cycles later an interrupt is generated. This causes
timeout even though much less time has elapsed. So the timer
period registers should be reset before get_timer(0) is
called.

There is similar usage in nand_base.c.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>
14 years agoppc/85xx: Use CONFIG_NS16550_MIN_FUNCTIONS to reduce NAND_SPL size
Kumar Gala [Wed, 7 Apr 2010 06:34:11 +0000 (01:34 -0500)]
ppc/85xx: Use CONFIG_NS16550_MIN_FUNCTIONS to reduce NAND_SPL size

The MPC8536DS_NAND SPL build was failing due to code size increase
introduced by commit:

commit 33f57bd553edf29dffef5a6c7d76e169c79a6049
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Mar 26 15:14:43 2010 -0500

    85xx: Fix enabling of L1 cache parity on secondary cores

We built in some NS16550 functions that we dont need and can get
rid of them via CONFIG_NS16550_MIN_FUNCTIONS.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agop2020ds: add alternate boot bank support using the ngPIXIS FPGA
Timur Tabi [Thu, 1 Apr 2010 15:49:42 +0000 (10:49 -0500)]
p2020ds: add alternate boot bank support using the ngPIXIS FPGA

The Freescale P2020DS board uses a new type of PIXIS FPGA, called the ngPIXIS.
The ngPIXIS has one distinct new feature: the values of the on-board switches
can be selectively overridden with shadow registers.  This feature is used to
boot from a different NOR flash bank, instead of having a register dedicated
for this purpose.  Because the ngPIXIS is so different from the previous PIXIS,
a new file is introduced: ngpixis.c.

Also update the P2020DS checkboard() function to use the new macros defined
in the header file.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agofsl: improve the PIXIS code and fix a few bugs
Timur Tabi [Wed, 31 Mar 2010 22:44:13 +0000 (17:44 -0500)]
fsl: improve the PIXIS code and fix a few bugs

Refactor and document the Freescale PIXIS code, used on most 85xx and 86xx
boards.  This makes the code easier to read and more flexible.

Delete pixis.h, because none of the exported functions were actually being
used by any other file.  Make all of the functions in pixis.c 'static'.
Remove "#include pixis.h" from every file that has it.

Remove some unnecessary #includes.

Make 'pixis_base' into a macro, so that we don't need to define it in every
function.

Add "while(1);" loops at the end of functions that reset the board, so that
execution doesn't continue while the reset is in progress.

Replace in_8/out_8 calls with clrbits_8, setbits_8, or clrsetbits_8, where
appropriate.

Replace ulong/uint with their spelled-out equivalents.  Remove unnecessary
typecasts, changing the types of some variables if necessary.

Add CONFIG_SYS_PIXIS_VCFGEN0_ENABLE and CONFIG_SYS_PIXIS_VBOOT_ENABLE to make
it easier for specific boards to support variations in the PIXIS registers
sets.  No current boards appears to need this feature.

Fix the definition of CONFIG_SYS_PIXIS_VBOOT_MASK for the MPC8610 HPCD.
Apparently, "pixis_reset altbank" has never worked on this board.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years ago85xx: Set HID1[mbdd] on e500v2 rev5.0 or greater
Sandeep Gopalpet [Fri, 12 Mar 2010 05:15:02 +0000 (10:45 +0530)]
85xx: Set HID1[mbdd] on e500v2 rev5.0 or greater

The HID1[MBDD] bit is new on rev5.0 or greater cores and will optimize
the performance of mbar/eieio instructions.

Signed-off-by: Sandeep Gopalpet <sandeep.kumar@freescale.com>
14 years ago85xx: Added various P1012/P1013/P1021/P1022 defines
Kumar Gala [Wed, 31 Mar 2010 04:06:53 +0000 (23:06 -0500)]
85xx: Added various P1012/P1013/P1021/P1022 defines

There are various locations that we have chip specific info:

* Makefile for which ddr code to build
* Added P1012/P1013/P1021/P1022 to cpu_type_list and SVR list
* Added number of LAWs for P1012/P1013/P1021/P1022
* Set CONFIG_MAX_CPUS to 2 for P1021/P1022
* PCI port config

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agoppc/8xxx: Delete PCI nodes from device tree if not configured
Kumar Gala [Tue, 30 Mar 2010 15:07:12 +0000 (10:07 -0500)]
ppc/8xxx: Delete PCI nodes from device tree if not configured

If the PCI controller wasn't configured or enabled delete from the
device tree (include its alias).

For the case that we didn't even configure u-boot with knowledge of
the controller we can use the fact that the pci_controller pointer
is NULL to delete the node in the device tree.  We determine that
a controller was not setup (because of HW config) based on the fact
that cfg_addr wasn't setup.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agofdt: Add fdt_del_node_and_alias helper
Kumar Gala [Tue, 30 Mar 2010 15:19:26 +0000 (10:19 -0500)]
fdt: Add fdt_del_node_and_alias helper

Add a helper function that given an alias will delete both the node
the alias points to and the alias itself

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
14 years ago85xx: Add defines for BUCSR bits to make code more readable
Kumar Gala [Mon, 29 Mar 2010 18:50:31 +0000 (13:50 -0500)]
85xx: Add defines for BUCSR bits to make code more readable

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agofsl-ddr: change the default burst mode for DDR3
Dave Liu [Fri, 5 Mar 2010 04:22:00 +0000 (12:22 +0800)]
fsl-ddr: change the default burst mode for DDR3

For 64B cacheline SoC, set the fixed 8-beat burst len,
for 32B cacheline SoC, set the On-The-Fly as default.

Signed-off-by: Dave Liu <daveliu@freescale.com>
14 years agofsl-ddr: Fix the turnaround timing for TIMING_CFG_4
Dave Liu [Fri, 5 Mar 2010 04:22:00 +0000 (12:22 +0800)]
fsl-ddr: Fix the turnaround timing for TIMING_CFG_4

Read-to-read/Write-to-write turnaround for same chip select
of DDR3 memory, BL/2+2 cycles is enough for them at BC4 and
OTF case, BL/2 cycles is enough for fixed BL8.
Cutting down the turnaround from BL/2+4 to BL/2+2 or BL/2
will improve the memory performance.

Signed-off-by: Dave Liu <daveliu@freescale.com>
14 years agofsl_esdhc: Only modify the field we are changing in WML
Roy Zang [Tue, 9 Feb 2010 10:23:33 +0000 (18:23 +0800)]
fsl_esdhc: Only modify the field we are changing in WML

When we set the read or write watermark in WML we should maintain the
rest of the register as is, rather than using some hard coded value.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agofsl_esdhc: Add function to reset the eSDHC controller
Jerry Huang [Thu, 18 Mar 2010 20:57:06 +0000 (15:57 -0500)]
fsl_esdhc: Add function to reset the eSDHC controller

To support multiple block read command we must set abort or use auto
CMD12.  If we booted from eSDHC controller neither of these are used
and thus we need to reset the controller to allow multiple block read
to function.

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agofsl_esdhc: Always stop clock before changing frequency
Kumar Gala [Thu, 18 Mar 2010 20:51:05 +0000 (15:51 -0500)]
fsl_esdhc: Always stop clock before changing frequency

We need to stop the clocks on 83xx/85xx as well as imx.  No need to make
this code conditional to just imx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Stefano Babic <sbabic@denx.de>
14 years agoi2c: Move PPC4xx I2C driver into drivers/i2c directory
Stefan Roese [Thu, 1 Apr 2010 12:37:24 +0000 (14:37 +0200)]
i2c: Move PPC4xx I2C driver into drivers/i2c directory

This patch moves the PPC4xx specific I2C device driver into the I2C
drivers directory. All 4xx config headers are updated to include this
driver.

Signed-off-by: Stefan Roese <sr@denx.de>
14 years agoarm/integrator: Remove unneccessary CONFIG_PCI check.
Detlev Zundel [Wed, 31 Mar 2010 13:38:55 +0000 (15:38 +0200)]
arm/integrator: Remove unneccessary CONFIG_PCI check.

pci_eth_init() is already conditional to CONFIG_PCI so not every caller
needs to have conditionals.

This is the only place in the current code base where such a check is
still at the calling site.

Signed-off-by: Detlev Zundel <dzu@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Peter Pearse <peter.pearse@arm.com>
14 years agoat91: use C structs for AT91 OHCI code
Matthias Fuchs [Thu, 25 Mar 2010 13:30:13 +0000 (14:30 +0100)]
at91: use C structs for AT91 OHCI code

This patch is part of migrating the AT91 support towards
using C struct for all SOC access.

It removes one more CONFIG_AT91_LEGACY warning.

at91_pmc.h needs cleanup after migration of the drivers
has been done.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
14 years agousing AT91_PMC_MCKR_MDIV_ instead of LEGACY one in at91/clock.c
Asen Dimov [Thu, 18 Mar 2010 11:46:45 +0000 (13:46 +0200)]
using AT91_PMC_MCKR_MDIV_ instead of LEGACY one in at91/clock.c

Signed-off-by: Asen Dimov <dimov@ronetix.at>
14 years agoNomadik: fix reset_timer()
Alessandro Rubini [Wed, 25 Nov 2009 22:41:51 +0000 (23:41 +0100)]
Nomadik: fix reset_timer()

Previous code was failing when reading back the timer less than
400us after resetting it. This lead nand operations to incorrectly
timeout any now and then.  Moreover, writing the load register isn't
immediately reflected in the value register. We must wait for a clock
edge, so read_timer now waits for the value to change at least once,
otherwise nand operation would timeout anyways (though less frequently).

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
14 years agoConvert at91 watchdog driver to new SoC access
Achim Ehrlich [Wed, 17 Mar 2010 13:50:29 +0000 (14:50 +0100)]
Convert at91 watchdog driver to new SoC access

This converts the at91 watchdog driver to new c structure
type to access registers of the SoC

Signed-off-by: Achim Ehrlich <aehrlich@taskit.de>
14 years agoat91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT
Daniel Gorsulowski [Wed, 17 Mar 2010 07:21:11 +0000 (08:21 +0100)]
at91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT

CONFIG_CMD_AUTOSCRIPT support is deprecated and non-existing
This clean up patch removes the references for esd boards

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
14 years agoep93xx timer: refactoring
Matthias Kaehlcke [Tue, 9 Mar 2010 21:13:56 +0000 (22:13 +0100)]
ep93xx timer: refactoring

ep93xx timer: Simplified the timer code by eliminating clk_to_systicks() and
performing (almost) all manipulation of the timer structure in read_timer()

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
14 years agoep93xx timer: Rename struct timer_reg pointers
Matthias Kaehlcke [Tue, 9 Mar 2010 21:13:47 +0000 (22:13 +0100)]
ep93xx timer: Rename struct timer_reg pointers

ep93xx timer: Renamed pointers to struct timer_regs from name 'timer' to
'timer_regs' in order to avoid confusion with the global variable 'timer'

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
14 years agoSAMSUNG: SMDKC100: Adds ethernet support.
Naveen Krishna CH [Fri, 5 Mar 2010 08:16:05 +0000 (17:16 +0900)]
SAMSUNG: SMDKC100: Adds ethernet support.

Add setup for ethernet on SMDKC100, allowing kernel/ramdisk to be
loaded over tftp.

The preinit function will configure GPIO (GPK0CON) & SROMC to look
for environment in SROM Bank 3.

Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agoS5PC100: Function to configure the SROMC registers.
Naveen Krishna CH [Fri, 5 Mar 2010 08:15:38 +0000 (17:15 +0900)]
S5PC100: Function to configure the SROMC registers.

Nand Flash, Ethernet, other features might need to configure the
SROMC registers accordingly.
The config_sromc() functions helps with this.

Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agoS5PC100: Memory SubSystem Header file, register description(SROMC).
Naveen Krishna CH [Fri, 5 Mar 2010 08:15:13 +0000 (17:15 +0900)]
S5PC100: Memory SubSystem Header file, register description(SROMC).

Memory subsystem of S5PC100 handles SROM, SRAM, OneDRAM, OneNand,
NAND Flash, DDRs.
smc.h is a common place for the register description of Memory subsystem
of S5PC100.
Note: Only SROM related registers are descibed now.

Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agos5pc1xx: update the README file
Minkyu Kang [Fri, 12 Feb 2010 09:21:17 +0000 (18:21 +0900)]
s5pc1xx: update the README file

Because adds support the GPIO Interface, README file is updated.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agos5pc1xx: support the GPIO interface
Minkyu Kang [Fri, 12 Feb 2010 09:17:52 +0000 (18:17 +0900)]
s5pc1xx: support the GPIO interface

This patch adds support the GPIO interface

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agos3c64xx: Add ifdef at the S3C64XX only codes
Joonyoung Shim [Mon, 8 Feb 2010 13:00:52 +0000 (22:00 +0900)]
s3c64xx: Add ifdef at the S3C64XX only codes

The s3c6400.h file is only for S3C64XX cpu and the pheripheral port
address(0x70000000 - 0x7fffffff) exists at only S3C64XX cpu, so they
should be included by only S3C64XX cpu.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agoS5PC100: Moves the Macros to a common header file
Naveen Krishna CH [Thu, 4 Feb 2010 05:17:38 +0000 (14:17 +0900)]
S5PC100: Moves the Macros to a common header file

The get_pll_clk(int) API returns the PLL frequency based on
the (int) argument which is defined locally in clock.c

Moving that #define to common header file (clk.h) would
be helpful when using the API from other files.

Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agoMAINTAINERS: sort the list of ARM Maintainers by last name
Minkyu Kang [Mon, 8 Mar 2010 07:22:33 +0000 (16:22 +0900)]
MAINTAINERS: sort the list of ARM Maintainers by last name

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agoSPEAr : Adding maintainer name for spear SoCs
Vipin KUMAR [Mon, 8 Mar 2010 05:16:07 +0000 (10:46 +0530)]
SPEAr : Adding maintainer name for spear SoCs

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
14 years agonios2: Reload timer count in reset_timer()
Scott McNutt [Thu, 1 Apr 2010 04:00:56 +0000 (00:00 -0400)]
nios2: Reload timer count in reset_timer()

   When the timestamp is incremented via interrupt and the interrupt
   period is greater than 1 msec, successive calls to get_timer() can
   produce inaccurate timing since the interrupts are asynchronous
   to the timing loop. For example, with an interrupt period of 10 msec
   two successive calls to get_timer() could indicate an elapsed time
   of 10 msec after only several hundred usecs -- depending on when
   the next interrupt actually occurs. This behavior can cause
   reliability issues with components such as CFI and NAND.

   This can be remedied by calling reset_timer() prior to establishing
   the base timestamp with get_timer(0), provided reset_timer()
   resets the hardware timer (rather than simply resetting only the
   timestamp). This has the effect of synchronizing the interrupts
   (and the advance of the timestamp) with the timing loop.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: pass command line and initrd to linux in bootm.c
Thomas Chou [Wed, 24 Mar 2010 03:41:46 +0000 (11:41 +0800)]
nios2: pass command line and initrd to linux in bootm.c

This patch adds bootargs passing to nios2 linux.

The args passing is enabled with,
r4 : 'NIOS' magic
r5 : pointer to initrd start
r6 : pointer to initrd end
r7 : pointer to command line

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: Fix AMDLV065D flash write bug in altera board common tree.
Scott McNutt [Wed, 31 Mar 2010 00:26:15 +0000 (20:26 -0400)]
nios2: Fix AMDLV065D flash write bug in altera board common tree.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards.
Scott McNutt [Wed, 31 Mar 2010 00:23:04 +0000 (20:23 -0400)]
nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards.

   CONFIG_SYS_HZ was being calculated (incorrectly) in nios2 configuration
   headers. Updated comments to accurately describe timebase macros.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: Fix outx/writex parameter order in io.h
Scott McNutt [Mon, 22 Mar 2010 01:24:43 +0000 (21:24 -0400)]
nios2: Fix outx/writex parameter order in io.h

The outx/writex macros were using writex(addr, val) rather than
   the standard writex(val, addr), resulting in incompatibilty with
   architecture independent components. This change set uses standard
   parameter order.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: Add support for EPCS16 and EPCS64 configuration devices.
Scott McNutt [Sun, 21 Mar 2010 19:36:44 +0000 (15:36 -0400)]
nios2: Add support for EPCS16 and EPCS64 configuration devices.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: Add missing Ethernet initialization to board_init().
Scott McNutt [Sun, 21 Mar 2010 17:26:33 +0000 (13:26 -0400)]
nios2: Add missing Ethernet initialization to board_init().

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: add struct stat support in linux/stat.h
Thomas Chou [Fri, 19 Mar 2010 23:05:47 +0000 (07:05 +0800)]
nios2: add struct stat support in linux/stat.h

This is needed for jffs2 support.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: use bitops from linux-2.6 asm-generic
Thomas Chou [Fri, 19 Mar 2010 23:05:46 +0000 (07:05 +0800)]
nios2: use bitops from linux-2.6 asm-generic

These are needed to use ubi/ubifs.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: add local_irq_enable/disable to asm-nios2/system.h
Thomas Chou [Fri, 19 Mar 2010 23:05:45 +0000 (07:05 +0800)]
nios2: add local_irq_enable/disable to asm-nios2/system.h

Copy from linux header. This is needed for generic bitops.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: add asm-nios2/errno.h
Thomas Chou [Fri, 19 Mar 2010 23:05:44 +0000 (07:05 +0800)]
nios2: add asm-nios2/errno.h

Just pull in asm-generic.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: Move serial drivers to individual files in drivers/serial
Scott McNutt [Fri, 19 Mar 2010 23:03:28 +0000 (19:03 -0400)]
nios2: Move serial drivers to individual files in  drivers/serial

   The standard Altera UART & JTAG UART as well as the OpenCores
   YANU driver are now in individual files in drivers/serial
   rather than a single file uner cpu/nios2.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agoMerge branch 'next'
Wolfgang Denk [Thu, 1 Apr 2010 09:28:32 +0000 (11:28 +0200)]
Merge branch 'next'

14 years agoPrepare v2010.03
Wolfgang Denk [Wed, 31 Mar 2010 21:54:39 +0000 (23:54 +0200)]
Prepare v2010.03

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agonet, doc: How to setup MAC address correctly
Heiko Schocher [Wed, 31 Mar 2010 06:34:51 +0000 (08:34 +0200)]
net, doc: How to setup MAC address correctly

As this seems unclear, document how the flow of setting up
the MAC address is correct.

Signed-off-by: Heiko Schocher <hs@denx.de>
Text changed slightly, adding input from Mike Frysinger.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agonet, fec_mxc: only setup the device enetaddr with eeprom value
Heiko Schocher [Wed, 31 Mar 2010 06:34:46 +0000 (08:34 +0200)]
net, fec_mxc: only setup the device enetaddr with eeprom value

Only fill the device enetaddr with the contents of the eeprom,
do not program it in MAC address registers

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
14 years agodoc: Fix ramdisk examples in doc/uImage.FIT/multi.its
Felix Radensky [Tue, 30 Mar 2010 12:02:13 +0000 (15:02 +0300)]
doc: Fix ramdisk examples in doc/uImage.FIT/multi.its

The ramdisk sections in doc/uImage.FIT/multi.its lack
load address and entry point properties. Using examples
from this file will result in unbootable image, u-boot
will issue the following error messages:

Can't get ramdisk subimage load address!
Ramdisk image is corrupt or invalid

This patch adds missing properties to ramdisk sections.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
14 years agojffs2, suen3: Fix compiler warning
Heiko Schocher [Wed, 24 Mar 2010 12:22:50 +0000 (13:22 +0100)]
jffs2, suen3: Fix compiler warning

$ ./MAKEALL suen3
jffs2_1pass.c: In function 'get_fl_mem':
jffs2_1pass.c:399: warning: unused variable 'id'
jffs2_1pass.c: In function 'get_node_mem':
jffs2_1pass.c:423: warning: unused variable 'id'

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Tom <Tom.Rix@windriver.com>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Tue, 30 Mar 2010 20:22:47 +0000 (22:22 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Tue, 30 Mar 2010 20:21:24 +0000 (22:21 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

14 years agompc86xx: set the DDR BATs after calculating true DDR size
Timur Tabi [Mon, 29 Mar 2010 17:51:07 +0000 (12:51 -0500)]
mpc86xx: set the DDR BATs after calculating true DDR size

After determining how much DDR is actually in the system, set DBAT0 and
IBAT0 accordingly.  This ensures that the CPU won't attempt to access
(via speculation) addresses outside of actual memory.

On 86xx systems, DBAT0 and IBAT0 (the BATs for DDR) are initialized to 2GB
and kept that way.  If the system has less than 2GB of memory (typical for
an MPC8610 HPCD), the CPU may attempt to access this memory during
speculation.  The zlib code is notorious for generating such memory reads,
and indeed on the MPC8610, uncompressing the Linux kernel causes a machine
check (without this patch).

Currently we are limited to power of two sized DDR since we only use a
single bat.  If a non-power of two size is used that is less than
CONFIG_MAX_MEM_MAPPED u-boot will crash.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years ago85xx: Fix enabling of L1 cache parity on secondary cores
Kumar Gala [Fri, 26 Mar 2010 20:14:43 +0000 (15:14 -0500)]
85xx: Fix enabling of L1 cache parity on secondary cores

Use the same code between primary and secondary cores to init the
L1 cache.  We were not enabling cache parity on the secondary cores.

Also, reworked the L1 cache init code to match the e500mc L2 init code
that first invalidates the cache and locks.  Than enables the cache and
makes sure its enabled before continuing.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agoppc4xx: Fix problem with I2C bus >= 1 initialization
Stefan Roese [Mon, 29 Mar 2010 13:30:46 +0000 (15:30 +0200)]
ppc4xx: Fix problem with I2C bus >= 1 initialization

This patch fixes a problem introduced with patch eb5eb2b0
[ppc4xx: Cleanup PPC4xx I2C infrastructure]. We need to assign the I2C
base address to the "i2c" pointer inside of the controller loop.
Otherwise controller 0 is initialized multiple times instead of
initializing each I2C controller sequentially.

Tested on Katmai.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
14 years agobootm, linux: fix booting Multi-File Image with "kernel+ramdisk+fdt"
Heiko Schocher [Mon, 29 Mar 2010 11:15:48 +0000 (13:15 +0200)]
bootm, linux: fix booting Multi-File Image with "kernel+ramdisk+fdt"

Booting a "Multi-File Image" including a linux kernel, ramdisk and
fdt, generated with

mkimage -A ppc \
    -O linux \
    -T multi \
    -C gzip \
    -a 00000000 \
    -e 00000000 \
    -n "kernel-2.6+initrd+dtb" \
    -d "vmlinux.bin.gz:ramdisk_image.gz:board.dtb" \
    multi.bin

actually fails, because ramdisk start and end addresses
didn;t get initialized. This patch fixes this issue.

Tested on the KUP4K board.

Signed-off-by: Heiko Schocher <hs@denx.de>
14 years agoi2c: made unused function i2c_mux_add_device static
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:42 +0000 (09:46 +0100)]
i2c: made unused function i2c_mux_add_device static

and removed it from the .h file

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
14 years agocmd_i2c: introduced get_alen helper function
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:41 +0000 (09:46 +0100)]
cmd_i2c: introduced get_alen helper function

The code to parse alen appeared 6 times in the function.
Factored this out in a small helper function

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
14 years agocmd_i2c: moved a define to before the functions
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:40 +0000 (09:46 +0100)]
cmd_i2c: moved a define to before the functions

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
14 years agocmd_i2c: moved mispositioned comment for i2c md
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:39 +0000 (09:46 +0100)]
cmd_i2c: moved mispositioned comment for i2c md

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
14 years agocmd_i2c.c: declared local functions as static
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:38 +0000 (09:46 +0100)]
cmd_i2c.c: declared local functions as static

Declared all functions that were not called outside the file as static

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
14 years agoMerge remote branch 'origin/master' into next
Wolfgang Denk [Mon, 29 Mar 2010 10:33:43 +0000 (12:33 +0200)]
Merge remote branch 'origin/master' into next

14 years agoMerge branch 'next' of git://www.denx.de/git/u-boot-cfi-flash into next
Wolfgang Denk [Mon, 29 Mar 2010 10:33:16 +0000 (12:33 +0200)]
Merge branch 'next' of git://www.denx.de/git/u-boot-cfi-flash into next

14 years agoPrepare 2010.03-rc3
Wolfgang Denk [Sat, 27 Mar 2010 23:25:14 +0000 (00:25 +0100)]
Prepare 2010.03-rc3

Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agocmd_usb.c: print debug messages only when DEBUG is defined
Wolfgang Denk [Thu, 25 Mar 2010 13:07:23 +0000 (14:07 +0100)]
cmd_usb.c: print debug messages only when DEBUG is defined

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoml300: remove support for broken, orphaned board
Wolfgang Denk [Wed, 24 Mar 2010 11:19:19 +0000 (12:19 +0100)]
ml300: remove support for broken, orphaned board

The ml300 board has a number of issues, but nobody cares about this
long-orphaned board any more.  Remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Michal Simek <monstr@monstr.eu>
14 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sat, 27 Mar 2010 23:15:20 +0000 (00:15 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

14 years agomkimage: fix Segmentation Fault when run without "-n name" option
Wolfgang Denk [Sat, 27 Mar 2010 22:37:46 +0000 (23:37 +0100)]
mkimage: fix Segmentation Fault when run without "-n name" option

The restructuring of the mkimage command in commit 89a4d6b1 ("tools:
mkimage: split code into core, default and FIT image specific")
introduced a bug that caused mkimage to segfault when run without
"-n name" option.  Initialize the imagename entry to prevent that.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-cfi-flash
Wolfgang Denk [Sat, 27 Mar 2010 23:11:16 +0000 (00:11 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash

14 years agoMerge branch 'next' of git://git.denx.de/u-boot-coldfire into next
Wolfgang Denk [Sat, 27 Mar 2010 23:04:18 +0000 (00:04 +0100)]
Merge branch 'next' of git://git.denx.de/u-boot-coldfire into next

14 years agocfi flash: add status polling method for amd flash
Thomas Chou [Fri, 26 Mar 2010 00:17:00 +0000 (08:17 +0800)]
cfi flash: add status polling method for amd flash

This patch adds status polling method to offer an alternative to
data toggle method for amd flash chips.

This patch is needed for nios2 cfi flash interface, where the bus
controller performs 4 bytes read cycles for a single byte read
instruction. The data toggle method can not detect chip busy
status correctly. So we have to poll DQ7, which will be inverted
when the chip is busy.

This feature is enabled with the config def,
CONFIG_SYS_CFI_FLASH_STATUS_POLL

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>
14 years agocfi_flash: precision and underflow problem in tout calculation
Renato Andreola [Wed, 24 Mar 2010 15:00:47 +0000 (23:00 +0800)]
cfi_flash: precision and underflow problem in tout calculation

With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000.

Signed-off-by: Renato Andreola <renato.andreola@imagos.it>
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>
14 years agoColdFire: Fix m54455EVB save environment bug
TsiChung Liew [Tue, 16 Mar 2010 17:39:36 +0000 (12:39 -0500)]
ColdFire: Fix m54455EVB save environment bug

The ATMEL flash does not have buffer write feature. Assgined
buffer_size = 1, so that when there is a write to the flash
will not use buffer write function.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
14 years agoColdFire: Fix incorrect M5253DEMO default environment
TsiChung Liew [Tue, 16 Mar 2010 00:39:21 +0000 (19:39 -0500)]
ColdFire: Fix incorrect M5253DEMO default environment

The flash location is at 0xff800000, not 0

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
14 years agoColdFire: Cache update for all platforms
TsiChung Liew [Fri, 12 Mar 2010 04:12:53 +0000 (22:12 -0600)]
ColdFire: Cache update for all platforms

The CF will call cache functions in lib_m68/cache.c and the
cache settings are defined in platform configuration file.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
14 years agoColdFire: Fix SDRAM size on M5208evb rev E
TsiChung Liew [Thu, 11 Mar 2010 00:50:22 +0000 (18:50 -0600)]
ColdFire: Fix SDRAM size on M5208evb rev E

The proper SDRAM size is 32MB not 64MB

Signed-off-by: Jingchang Lu <b22599@freescale.com>
14 years agoColdFire: Misc update for M53017
TsiChung Liew [Thu, 11 Mar 2010 00:24:07 +0000 (18:24 -0600)]
ColdFire: Misc update for M53017

Reside Ethernet buffer descriptors in SRAM instead of DRAM. Add
CONFIG_SYS_TX_ETH_BUFFER in platform configuration file. Update
DRAM control and SRAM control register setting. Update cache
setting where size does not write to proper region.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14 years agoColdFire: Add CPU compile flag for mcf5301x and mcf532x
TsiChung Liew [Wed, 10 Mar 2010 23:32:13 +0000 (17:32 -0600)]
ColdFire: Add CPU compile flag for mcf5301x and mcf532x

Add CPU compile flag -mcpu=53015 in cpu/config.mk

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
14 years agoColdFire: Update Extra environment Data for M5275EVB
TsiChung Liew [Wed, 10 Mar 2010 22:33:03 +0000 (16:33 -0600)]
ColdFire: Update Extra environment Data for M5275EVB

Provide extra environment Data. Remove default network
address and MAC address.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
14 years agoColdFire: M5271EVB DRAM Bring up issue
TsiChung Liew [Wed, 10 Mar 2010 22:14:01 +0000 (16:14 -0600)]
ColdFire: M5271EVB DRAM Bring up issue

Fix proper portsize: The register for portsize is either 00b, 01b,
or 1xb. The value that previous assigned is 32d.
Fix DRAM bring up: insert asm("nop") for every DRAM register setup

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
14 years agoColdFire: Update M5253DEMO configuration file
TsiChung Liew [Wed, 10 Mar 2010 17:56:36 +0000 (11:56 -0600)]
ColdFire: Update M5253DEMO configuration file

Fix incorrect default environment for flash erase or protect
range. Change offset from 0 to 0xff80nnnn. Remove default
ethernet setup and MAC address.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
14 years agoColdFire: Relocate vector table - mcf5445x
TsiChung Liew [Thu, 11 Mar 2010 21:04:21 +0000 (15:04 -0600)]
ColdFire: Relocate vector table - mcf5445x

Newer ColdFire processors family boot from address 0 instead of
0xFFnn_nnnn. When the boot flash base chip select is set at new
location instead of 0, an un-predictable error will occur if
there is an vector being trigger and refer it to an invalid
address or the vector table handler is not existed at address
0.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>