Chia-Wei Wang [Wed, 27 Oct 2021 06:17:35 +0000 (14:17 +0800)]
configs: ast2600: Boot kernel FIT in DRAM
AST2600 leverages the FIT hash/signature verification to fulfill
secure boot trust chain. To improve the performance and save SW
code size for those crypto operations, the two HW crypto engine,
HACE and ACRY, are enabled.
However, both of the engines can only access to data stored in
DRAM space. Therefore, we need to move the FIT image into DRAM
before the booting.
This patch update the CONFIG_BOOTCOMMAND to execute the pre-defined
ENV variable which consists of FIT image copy to memory and booting.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Chia-Wei Wang [Wed, 27 Oct 2021 06:17:32 +0000 (14:17 +0800)]
ast2600: spl: Locate load buffer in DRAM space
Return CONFIG_SYS_LOAD_ADDR pointing to DRAM space for
spl_get_load_buffer() to allow generic SPL image loading
code (e.g. FIT and Ymodem) to store data in DRAM.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au>
Johnny Huang [Wed, 27 Oct 2021 06:17:27 +0000 (14:17 +0800)]
crypto: aspeed: Add AST2600 HACE support
Hash and Crypto Engine (HACE) is designed to accelerate the
throughput of hash data digest, and symmetric-key encryption.
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Chia-Wei Wang [Wed, 27 Oct 2021 06:17:24 +0000 (14:17 +0800)]
image: fit: Fix parameter name for hash algorithm
Fix inconsistent function parameter name of the hash algorithm.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Fixes: 92055e138f2 ("image: Drop if/elseif hash selection in calculate_hash()") Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 3 Nov 2021 13:16:06 +0000 (07:16 -0600)]
arm: Init the debug UART
At present we don't init the debug UART in the generic ARM code, but
instead leave it to individual machines to handle. This is not the
way it is supposed to work.
Add the required init to the crt files. This ensures that the UART
is available as early as possible and that the announcement appears
when it should, if enabled.
Pali Rohár [Wed, 3 Nov 2021 00:01:05 +0000 (01:01 +0100)]
pci: Add standard PCIe ECAM macros
Lot of PCIe controllers are using ECAM addressing. So add common ECAM
macros into U-Boot's pci.h header file which can be suitable for most
PCI controller drivers.
Replace custom ECAM address macros in every PCI controller driver by new
ECAM macros from U-Boot's pci.h header file.
Similar macros are defined also in Linux kernel. There is a small
difference between Linux and these new U-Boot macros.
U-Boot's PCIE_ECAM_OFFSET() takes device and function numbers in separate
arguments. Linux's PCIE_ECAM_OFFSET() takes device and function numbers
encoded in one argument. The reason is that U-Boot's PCI_DEVFN() macro is
different than Linux's PCI_SLOT() macro. So having device and function
numbers in separate arguments makes code more straightforward.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Tom Rini [Wed, 17 Nov 2021 01:55:12 +0000 (20:55 -0500)]
Merge branch '2021-11-16-env-rework' into next
To quote Simon:
One barrier to completing the 7-year-long Kconfig migration is that
the default environment is implemented using ad-hoc CONFIG options.
At present U-Boot environment variables, and thus scripts, are defined
by CONFIG_EXTRA_ENV_SETTINGS.
It is not really feasible to move the environment to Kconfig as it is
hundreds of lines of text in some cases.
Even considering the current situation, it is painful to add large
amounts of text to the config-header file and dealing with quoting and
newlines is harder than it should be. It would be better if we could just
type the script into a text file and have it included by U-Boot.
This is already supported by the CONFIG_USE_DEFAULT_ENV_FILE feature. But
that does not support use of CONFIG options or comments, so is best suited
for use by other build systems wanting to define the U-Boot environment.
Add a feature that brings in a .env file associated with the board
config, if present. To use it, create a file board/<vendor>/<board>.env or
use CONFIG_ENV_SOURCE_FILE to set a filename.
The environment variables should be of the form "var=value". Values can
extend to multiple lines. This series converts the existing environment
documentation to rST and updates it to explain how to use this.
Simon Glass [Fri, 22 Oct 2021 03:08:52 +0000 (21:08 -0600)]
bootm: Tidy up use of autostart env var
This has different semantics in different places. Go with the bootm method
and put it in a common function so that the behaviour is consistent in
U-Boot. Update the docs.
To be clear, this changes the way that 'bootelf' and standalone boot
work. Before, if autostart was set to "fred" or "YES", for example, they
would consider that a "yes". This may change behaviour for some boards,
but the only in-tree boards which mention autostart use "no" to disable
it, which will still work.
Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
Simon Glass [Fri, 22 Oct 2021 03:08:46 +0000 (21:08 -0600)]
env: Allow U-Boot scripts to be placed in a .env file
At present U-Boot environment variables, and thus scripts, are defined
by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text
to this file and dealing with quoting and newlines is harder than it
should be. It would be better if we could just type the script into a
text file and have it included by U-Boot.
Add a feature that brings in a .env file associated with the board
config, if present. To use it, create a file in a board/<vendor>
directory, typically called <board>.env and controlled by the
CONFIG_ENV_SOURCE_FILE option.
The environment variables should be of the form "var=value". Values can
extend to multiple lines. See the README under 'Environment Variables:'
for more information and an example.
In many cases environment variables need access to the U-Boot CONFIG
variables to select different options. Enable this so that the environment
scripts can be as useful as the ones currently in the board config files.
This uses the C preprocessor, means that comments can be included in the
environment using /* ... */
Also support += to allow variables to be appended to. This is needed when
using the preprocessor.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz>
Simon Glass [Fri, 22 Oct 2021 03:08:44 +0000 (21:08 -0600)]
sandbox: Drop distro_boot
This is a complicated set of #defines and it is painful to convert to a
text file. We can (once pending patches are applied) provide the same
functionality with bootmethod. Drop this for sandbox to allow conversion
to a text-file environment.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
Simon Glass [Mon, 1 Nov 2021 01:17:03 +0000 (19:17 -0600)]
Makefile: Correct TPL rule for OF_REAL
Correct an error in the tpl-dtb parameter to binman. At present the TPL
rule follows SPL but this is not correct, if TPL uses of-platdata, for
example.
Fixes: f99cbe4e867 ("fdt: Update Makefile rules with the new OF_REAL Kconfig") Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Marek Behún [Wed, 3 Nov 2021 23:23:23 +0000 (00:23 +0100)]
env: Simplify env_get_default()
Instead of pretending that we don't have environment to force searching
default environment in env_get_default(), get the data from the
default_environment[] buffer directly.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 4 Nov 2021 03:09:18 +0000 (21:09 -0600)]
binman: Support updating the dtb in an ELF file
WIth EFI we must embed the devicetree in an ELF image so that it is loaded
as part of the executable file. We want it to include the binman
definition in there also, which in some cases cannot be created until the
ELF (u-boot) is built. Add an option to binman to support writing the
updated dtb to the ELF file u-boot.out
This is useful with the EFI app, which is always packaged as an ELF file.
Simon Glass [Thu, 4 Nov 2021 03:09:16 +0000 (21:09 -0600)]
binman: Support reading the offset of an ELF-file symbol
Binman needs to be able to update the contents of an ELF file after it has
been build. To support this, add a function to locate the position of a
symbol's contents within the file.
Fix the comments on bss_data.c and Symbol while we are here.
Tom Rini [Mon, 8 Nov 2021 03:59:50 +0000 (22:59 -0500)]
Remove CONFIG_SERIAL_MULTI
This symbol has been functionally dead for a long time. Remove the last
and recent re-introductions of setting it, and update the whitelist so
it will not be re-introduced again.
Tom Rini [Mon, 8 Nov 2021 03:59:38 +0000 (22:59 -0500)]
Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to Kconfig
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_SPI_FLASH
CONFIG_ENV_IS_NOWHERE
CONFIG_ENV_OFFSET
CONFIG_ENV_OVERWRITE
CONFIG_ENV_SECT_SIZE
CONFIG_SYS_MMC_ENV_DEV
CONFIG_SYS_MMC_ENV_PART
Tom Rini [Fri, 12 Nov 2021 15:14:24 +0000 (10:14 -0500)]
Merge branch '2021-11-12-assorted-updates'
- A number of pxe related cleanups and related re-organization.
- A few related pxe/sysboot/extlinux improvements
- Remove some dead code.
- Update Azure to use a newer Windows build environment
- Add a .get_maintainer.conf file
- A few minor TI SoC platform updates
Jan Kiszka [Wed, 3 Nov 2021 14:12:30 +0000 (15:12 +0100)]
boards: siemens: iot2050: Ignore network errors during bootstage tracking
We need to filter out NET_ETH_START errors because we have to enable
networking in order to propagate the MAC addresses to the DT while there
is no network driver for the prueth in U-Boot yet.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Commit 4b2be78ab66c ("time: Fix get_ticks being non-monotonic") has
broken boot on chiliboard platform, as it requires '/chosen/tick-timer'
in device-tree. This resulted in following panic message:
Could not initialize timer (err -19)
Provide missing chosen property in device-tree to fix chiliboard
support.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Michael Walle [Sun, 31 Oct 2021 22:38:12 +0000 (23:38 +0100)]
get_maintainer.pl: add .get_maintainer.conf
Since commit e57c7c5c4282 ("get_maintainer.pl: update from Linux kernel
v5.13-rc6") only the top level MAINTAINERS file is used. This is because
this commit (accidentally) disabled the search of MAINTAINERS files
(find_maintainer_files is set to 0 again). Before that, commit b79372ae94fb ("scripts/get_maintainer.pl: enable find_maintainer_files")
explicitly enabled that feature. Nowadays, we also have to set
maintainer_path to a directory.
To fix it and enable recursive search of MAINTAINERS, create a
configuration file to set these two variables.
Tom Rini [Sun, 31 Oct 2021 17:24:42 +0000 (13:24 -0400)]
Azure: Move to windows-2019
As per https://github.com/actions/virtual-environments/issues/4312 the
Windows-2016 environments are scheduled for deprecation and removal in
early 2022. Move to windows-2019 now to avoid this (Visual Studio 2019
is included here, hence the tag naming scheme change).
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Thomas Huth [Tue, 26 Oct 2021 12:31:18 +0000 (14:31 +0200)]
Remove LYNX KDI remainders
The last board that used to set CONFIG_LYNXKDI has been removed in
commit 242836a893ae ("powerpc: ppc4xx: remove pcs440ep support"),
doc/README.lynxkdi only talks about a MPC8260 board being supported,
and the mpc8260 support has been removed four years ago in commit 2eb48ff7a210d ("powerpc, 8260: remove support for mpc8260") already,
and common/lynxkdi.c only consists of an "#error" statement these
days, so it seems like the LYNX KDI code is dead code nowadays.
Let's remove it now.
Simon Glass [Thu, 14 Oct 2021 18:48:11 +0000 (12:48 -0600)]
pxe: Allow calling the pxe_get logic directly
Refactor this code so that we can call the 'pxe get' command without going
through the command-line interpreter. This makes it easier to get the
information we need, without going through environment variables.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Simon Glass [Thu, 14 Oct 2021 18:48:09 +0000 (12:48 -0600)]
pxe: Refactor sysboot to have one helper
The only difference between the three helpers is the filesystem type.
Factor this out and call the filesystem functions directly, instead of
through the command-line interpreter. This allows the file size to be
obtained directly, instead of via an environment variable.
We cannot do the same thing with PXE's tftpboot since there is no API
at present to obtain information about the file that was read. So there
is no point in changing pxe_getfile_func to use a ulong for the address,
for example.
This is as far as the refactoring can go for the present.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Simon Glass [Thu, 14 Oct 2021 18:48:08 +0000 (12:48 -0600)]
pxe: Return the file size from the getfile() function
It is pretty strange that the pxe code uses the 'filesize' environment
variable find the size of a file it has just read.
Partly this is because it uses the command-line interpreter to parse its
request to load the file.
As a first step towards unwinding this, return it directly from the
getfile() function. This makes the code a bit longer, for now, but will be
cleaned up in future patches.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Simon Glass [Thu, 14 Oct 2021 18:48:00 +0000 (12:48 -0600)]
pxe: Move pxe_utils files
Move the header file into the main include/ directory so we can use it
from the bootmethod code. Move the C file into boot/ since it relates to
booting.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Simon Glass [Thu, 14 Oct 2021 18:47:56 +0000 (12:47 -0600)]
pxe: Use a context pointer
At present the PXE functions pass around a pointer to command-table entry
which is very strange. It is only needed in a few places and it is odd to
pass around a data structure from another module in this way.
For bootmethod we will need to provide some context information when
reading files.
Create a PXE context struct to hold the command-table-entry pointer and
pass that around instead. We can then add more things to the context as
needed.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Simon Glass [Thu, 14 Oct 2021 18:47:54 +0000 (12:47 -0600)]
Create a new boot/ directory
Quite a lot of the code in common/relates to booting and images. Before
adding more it seems like a good time to move the code into its own
directory.
Most files with 'boot' or 'image' in them are moved, except:
- autoboot.c which relates to U-Boot automatically running a script
- bootstage.c which relates to U-Boot timing
Drop the removal of boot* files from the output directory, since this
interfers with the symlinks created by tools and there does not appear
to be any such file from my brief testing.
- device-tree sync-up with Linux for ls1028a
- fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc,
spintable code, configs, qspi node, pci
- enable EFI_SET_TIME support in sl28
- powerpc: Drop -mstring
projects / u-boot.git / log