Pali Rohár [Fri, 22 Oct 2021 14:22:08 +0000 (16:22 +0200)]
pci: pci_mvebu: Fix write_config() with PCI_SIZE_8 or PCI_SIZE_16
Current implementation of write_config() is broken for PCI_SIZE_8 or
PCI_SIZE_16 as it always uses writel(), which means that write operation
is always 32-bit, so upper 24 bits for PCI_SIZE_8 and upper 16 bits for
PCI_SIZE_16 are cleared.
Fix this by using writeb() and writew(), respectively.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
- Fixes for x86 build with Clang/LLVM compiler
- Tangier ACPI changes
- Edison SD card detect pin fix
- EFI on x86 doc update with latest instructions
- PXE utility fixes to align with latest x86 zboot implementation
Andy Shevchenko [Wed, 27 Oct 2021 14:23:38 +0000 (17:23 +0300)]
x86: tangier: pinmux: Move error message to the caller
Move error message to the caller of mrfld_pinconfig*() in order
to unify them in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Wed, 27 Oct 2021 14:23:37 +0000 (17:23 +0300)]
x86: tangier: pinmux: Move is_protected assignment closer to its user
Move is_protected assignment closer to its user.
This increases readability and makes maintenance easier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Wed, 27 Oct 2021 11:28:10 +0000 (14:28 +0300)]
x86: edison: Don't take SD card detect pin into consideration
There are two PCB designs in the wild which use the opposite
signaling for SD card detection. This makes U-Boot working
in one case and failing in the other. Quirk this out by
disconnecting SD card detection pin from the PCB by switching
it to mode 3. In the disconnected state the read value is always
the same and inverted to what we are expecting in the code.
Alistair Delva [Wed, 20 Oct 2021 21:31:30 +0000 (21:31 +0000)]
x86: Fix i8254 ifdef include guard
When building U-Boot with clang, it notices that the i8254.h include
guard does not work correctly due to a typo. Fix it.
Signed-off-by: Alistair Delva <adelva@google.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fixed the other same typo at the end of the same file] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Alistair Delva [Wed, 20 Oct 2021 21:31:29 +0000 (21:31 +0000)]
x86: chromebook_coral: fix C block comment
Fix a warning seen when compiling this dts file.
Signed-off-by: Alistair Delva <adelva@google.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Wed, 20 Oct 2021 12:51:18 +0000 (15:51 +0300)]
x86: tangier: Replace Method() by Name() for _STA object
There is no point to use Method() for the constant.
Replace it with Name() defined object. For the _STA
case it saves 3 bytes per each entry.
Before: 2881
After: 2833
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Zhaofeng Li [Wed, 20 Oct 2021 07:18:15 +0000 (00:18 -0700)]
pxe_utils: Clean up {bootm,zboot}_argv generation
Signed-off-by: Zhaofeng Li <hello@zhaofeng.li> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Zhaofeng Li [Wed, 20 Oct 2021 07:18:14 +0000 (00:18 -0700)]
pxe_utils: Fix arguments to x86 zboot
bootm and zboot accept different arguments:
> bootm [addr [arg ...]]
> - boot application image stored in memory
> passing arguments 'arg ...'; when booting a Linux kernel,
> 'arg' can be the address of an initrd image
> zboot [addr] [size] [initrd addr] [initrd size] [setup] [cmdline]
> addr - The optional starting address of the bzimage.
> If not set it defaults to the environment
> variable "fileaddr".
> size - The optional size of the bzimage. Defaults to
> zero.
> initrd addr - The address of the initrd image to use, if any.
> initrd size - The size of the initrd image to use, if any.
In the zboot flow, the current code will reuse the bootm args and attempt
to pass the initrd arg (argv[2]) as the kernel size (should be argv[3]).
zboot also expects the initrd address and size to be separate arguments.
Let's untangle them and have separate argv/argc locals.
Signed-off-by: Zhaofeng Li <hello@zhaofeng.li> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 21 Jun 2021 02:12:32 +0000 (10:12 +0800)]
docs: uefi: Update stale U-Boot on EFI doc
The existing intructions in the U-Boot on EFI doc do not work with
the latest QEMU. Update the doc with the correct instructions, as
well as using the new OVMF URL link.
Tom Rini [Sun, 31 Oct 2021 19:48:43 +0000 (15:48 -0400)]
Merge tag 'dm-pull-boo21' of https://source.denx.de/u-boot/custodians/u-boot-dm
Environment tidy-ups
patman 'postfix' support
fix binman test race condition causing a timeout error
# gpg: Signature made Sun 31 Oct 2021 03:36:55 PM EDT
# gpg: using RSA key B25C0022AF86A7CC1655B6277F173A3E9008ADE6
# gpg: issuer "sjg@chromium.org"
# gpg: Good signature from "Simon Glass <sjg@chromium.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B25C 0022 AF86 A7CC 1655 B627 7F17 3A3E 9008 ADE6
Sean Anderson [Fri, 22 Oct 2021 23:07:04 +0000 (19:07 -0400)]
patman: Add "postfix" support to patch subjects
In some communities, it may be necessary to append something after PATCH
in the subject line. For example, the Linux networking subsystem
expects [1] patch subject prefixes like [RFC PATCH net-next 0/99]. This
adds support for such "postfix"s to patman. Although entirely cosmetic,
it is still nice to have.
Marek Behún [Fri, 22 Oct 2021 13:47:25 +0000 (15:47 +0200)]
env: Use static_assert() to check if default_environment is too large
Check sizeof(default_environment) against ENV_SIZE in a static_assert()
instead of runtime.
Only check if !USE_HOSTCC (for in fw_env tool ENV_SIZE expands to a
variable, and cannot be checked statically) nad
!DEFAULT_ENV_INSTANCE_EMBEDDED, for in that case the default_environment
variable is not set.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Behún [Fri, 22 Oct 2021 13:47:23 +0000 (15:47 +0200)]
board: freescale: various boards: Let env subsystem set gd->env_addr
Various freescale boards set gd->env_addr to default_environment in
board_init(), conditional on CONFIG_ENV_IS_NOWHERE, but this is
redundant, since it is done by env_init() before board_init() is called.
Let the env subsystem handle this.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Behún [Fri, 22 Oct 2021 13:47:22 +0000 (15:47 +0200)]
board: synquacer: developerbox: Don't set gd->env_addr to default_environment
This board sets gd->env_addr to default_environment in board_init(), but
the board has environment in SPI flash according to defconfig. Let the
env API handle environment automatically.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Behún [Fri, 22 Oct 2021 13:47:20 +0000 (15:47 +0200)]
env: flash: Let generic env_init() assign default environment
env_flash_init() (both implementations) assigns default environment if
ENV_INVALID, but this is done in the generic env_init() function, which
calls this initializer, so drop it from here.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Behún [Fri, 22 Oct 2021 13:47:18 +0000 (15:47 +0200)]
env: nowhere: Let generic env_init() assign default environment
env_nowhere_init() assigns default environment if ENV_INVALID, but this
is done in the generic env_init() function, which calls this
initializer, so drop it from here.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Behún [Fri, 22 Oct 2021 13:47:16 +0000 (15:47 +0200)]
env: nvram: Let generic env_init() assign default environment
env_nvram_init() assigns default environment if ENV_INVALID, but this is
done in the generic env_init() function, which calls this initializer,
so drop it from here.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Behún [Fri, 22 Oct 2021 13:47:15 +0000 (15:47 +0200)]
env: nand: Put ENV_INVALID into gd->env_valid if default environment
env_nand_init() says the environment is valid even if it is assigning
default environment due to not being able to access nand pre-reloaction
(determined by macro values). Change this to ENV_INVALID and let the
generic env_init() function, which calls this initializer, assign the
default environment.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Behún [Fri, 22 Oct 2021 13:47:14 +0000 (15:47 +0200)]
env: sf: Put ENV_INVALID into gd->env_valid on CRC failure
env_sf_init_addr() says the environment is valid even if it is assigning
default environment due to CRC failure. Change this to ENV_INVALID and
let the generic env_init() function, which calls this initializer,
assign the default environment.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
Alistair Delva [Wed, 20 Oct 2021 21:31:33 +0000 (21:31 +0000)]
x86: Fix linking u-boot with ld.lld
When linking the final u-boot binary with LLD, the following link errors
are seen:
ld.lld: error: can't create dynamic relocation R_386_32 against local
symbol in readonly segment; recompile object files with
-fPIC or pass '-Wl,-z,notext' to allow text relocations
in the output
>>> defined in arch/x86/cpu/start.o
>>> referenced by arch/x86/cpu/start.o:(.text.start+0x32)
[...]
>>> defined in arch/x86/cpu/start16.o
>>> referenced by arch/x86/cpu/start16.o:(.start16+0x1C)
According to Nick Desaulniers:
"This is a known difference between GNU and LLVM linkers; the GNU
linkers permit relocations in readonly segments (making them not read
only), LLVM does not (by default)."
Since U-Boot apparently seems to use relocations in readonly segments,
change the global linker flags to permit them when linking with LLD by
specifying '-z notext'.
Signed-off-by: Alistair Delva <adelva@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 18 Oct 2021 18:13:15 +0000 (12:13 -0600)]
binman: Allow timeout to occur in the image or its section
At present testThreadTimeout() assumes that the expected timeout happens
first when building the section, but it can just as easily happen at the
top-level image. Update the test to cope with both.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
Hannu Lounento [Mon, 18 Oct 2021 05:49:03 +0000 (08:49 +0300)]
image.h: make image_sign_info.fit point to const
The data blob apparently does not need to be modified through the fit
field of the image_sign_info struct so make it point to const to avoid
the need to cast away constness in functions that assign a pointer to
const data to the field.
fit_image_setup_verify already had to cast away constness as it assigned
a const void * argument to the field. The cast can now be removed.
Signed-off-by: Hannu Lounento <hannu.lounento@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
- Revert GIC LPI changes that need to be reworked.
- mvebu SATA booting bugfix
- Samsung Galaxy S9/S9+(SM-G96x0), Samsung Galaxy A and Apple M1
platform support.
board: samsung: add support for Galaxy A series of 2017 (a5y17lte)
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones.
U-boot can be used as chain-loaded bootloader to gain control
on booting vanilla linux(and possibly others) kernels
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone,
for China \ Hong Kong markets.
Has unlockable bootloader, unlike SM-G960U (American market version),
which allows running u-boot as a chain-loaded bootloader.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
Hi-end qualcomm chip, introduced in late 2017.
Mostly used in flagship phones and tablets of 2018.
Features:
- arm64 arch
- total of 8 Kryo 385 Gold / Silver cores
- Hexagon 685 DSP
- Adreno 630 GPU
Tested only as second-stage bootloader.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Stephan Gerhold <stephan@gerhold.net>
Allows to change clock frequency of debug uart,
thus supporting wide range of baudrates.
Enable / disable functionality is not implemented yet.
In most use cases of SDM845 (i.e. mobile phones and tablets)
it's not needed, because qualcomm first stage bootloader leaves it
initialized, and on the other hand there's no possibility to
replace signed first stage bootloader with u-boot.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
Generic Interface (GENI) Serial Engine (SE) based uart
can be found on newer qualcomm SOCs, starting from SDM845.
Tested on Samsung SM-G9600(starqltechn)
by chain-loading u-boot with stock bootloader.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
Mark Kettenis [Sat, 23 Oct 2021 14:58:06 +0000 (16:58 +0200)]
arm: dts: apple: Add preliminary device trees
Add preliminary device trees for the Apple M1 mini (2020) and
Apple M1 Macbook Pro 13" (2020). Device tree bindings for
the Apple M1 SoC are still being formalized and these device
trees will be synchronized with the Linux kernel as needed.
The device trees in this commit are based on the initial Apple
M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl,
pmgr, usb based on bindings on track for inclusion in Linux
5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and
watchdog that don't have a proposed binding yet.
These device trees are provided as a reference only as U-Boot
uses the device tree passed by the m1n1 bootloader.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Mark Kettenis [Sat, 23 Oct 2021 14:58:05 +0000 (16:58 +0200)]
iommu: Add Apple DART driver
The DART is an IOMMU that is used on Apple's M1 SoC. This driver
configures the DART such that it operates in bypass mode which is
enough to support DMA for the USB3 ports integrated on the SoC.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Mark Kettenis [Sat, 23 Oct 2021 14:58:03 +0000 (16:58 +0200)]
arm: apple: Add initial support for Apple's M1 SoC
Add support for Apple's M1 SoC that is used in "Apple Silicon"
Macs. This builds a basic U-Boot that can be used as a payload
for the m1n1 boot loader being developed by the Asahi Linux
project.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Add MAINTAINERS entry]
Mark Kettenis [Sat, 23 Oct 2021 14:58:01 +0000 (16:58 +0200)]
iommu: Add IOMMU uclass
This uclass is intended to manage IOMMUs on systems where the
IOMMUs are not in bypass mode by default. In that case U-Boot
cannot ignore the IOMMUs if it wants to use devices that need
to do DMA and sit behind such an IOMMU.
This initial IOMMU uclass implementation does not implement and
device ops and is intended for IOMMUs that have a bypass mode
that does not require address translation. Support for IOMMUs
that do require address translation is planned and device ops
will be defined when support for such IOMMUs will be added.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michael Walle <michael@walle.cc>
[trini: Also make board/broadcom/bcmns3/ns3.c fail clearly now] Signed-off-by: Tom Rini <trini@konsulko.com>
Ad-hoc bindings that are not part of the upstream device tree / bindings
are not allowed in-tree. Only bindings that are in-progress with
upstream and then re-synced once agreed upon are.
Sean Anderson [Fri, 29 Oct 2021 15:05:54 +0000 (11:05 -0400)]
cmd: usb_mass_storage: Use part_get_info_by_dev_and_name_or_num
This allows specifying partitions using more extended syntax. This is
particularly useful to access eMMC hardware partitions. For example,
this allows something like
ums 0 mmc 0.0,0.1,0.2,0.3
to expose four LUNs for each of the four default eMMC hardware
partitions. Note that the comma syntax was already present, and this
syntax is already documented.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Adam Ford [Mon, 20 Sep 2021 16:14:29 +0000 (11:14 -0500)]
ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/H
Now that TARGET_BEACON_RZG2M can handle all the work that
was done with TARGET_BEACON_RZG2N and TARGET_BEACON_RZG2H,
remove them since they just create more duplicate code.
Adam Ford [Mon, 20 Sep 2021 16:14:28 +0000 (11:14 -0500)]
ARM: rmobile: beacon: Support RZ/G2 [M/N/H] on TARGET_BEACON_RZG2M
The three different boards share the same board file and only differ
in terms of which SoC is being used. By enabling FIT on
TARGET_BEACON_RZG2M, it can support all three boards and elimate
duplicate code.
Adam Ford [Mon, 20 Sep 2021 16:14:27 +0000 (11:14 -0500)]
ARM: rmobile: Enable board detection when FIT is enabled
There are three boards from Beacon, RZ/G2 M/N/H which all
use the same board file, but different device trees.
Add code to automatically select the proper device tree
based on the CPU type.
Usama Arif [Tue, 19 Oct 2021 14:49:48 +0000 (15:49 +0100)]
mmc: arm_pl180_mmci: Enable HWFC for specific versions of MCI
There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI.
For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control
needs to be enabled for multi block writes (MMC CMD 18).
Marek Vasut [Wed, 15 Sep 2021 09:43:13 +0000 (11:43 +0200)]
cmd: mmc: Support mmc hwpartition user enh start -
Add option to extend the hardware partition to the maximum size by
using the '-' dash sign instead of $cnt parameter. This is useful
in case we want to switch the entire eMMC user area into pSLC mode,
especially in case the device may be populated with different size
eMMCs. With this change, we do not have to calculate the number of
blocks of the user area manually.
To switch the pSLC mode for user area, use e.g. the following.
WARNING: This is a one-time irreversible change.
=> mmc hwpartition user enh 0 - wrrel on complete
Stephen Carlson [Tue, 17 Aug 2021 19:46:41 +0000 (12:46 -0700)]
drivers: mmc: Add wait_dat0 support for sdhci driver
Adds an implementation of the wait_dat0 MMC operation for the DM SDHCI
driver, allowing the driver to continue when the card is ready rather
than waiting for the worst case time on each MMC switch operation.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Stephen Carlson [Tue, 17 Aug 2021 19:46:40 +0000 (12:46 -0700)]
drivers: mmc: Add wait_dat0 support for Freescale eSDHC driver
Adds an implementation of the wait_dat0 MMC operation for the Freescale
eSHDC driver, allowing the driver to continue when the card is ready
rather than waiting for the worst case time on each MMC switch operation.
- mvebu: Fix usage of BIN header arguments (Pali)
- mvebu: turris_omnia: Fix MTD partitions order for Linux (Pali)
- mvebu: nandpagesize support for kwbimage v1 (Pali)
Pali Rohár [Fri, 22 Oct 2021 10:37:46 +0000 (12:37 +0200)]
tools: kwbimage: Add support for NAND_PAGE_SIZE command also for v1 images
The NAND_PAGE_SIZE command is already supported by mkimage for v0 images,
but not for v1 images.
A38x and A39x BootROM supports reading NAND flash page size from v1 image
in the same way as Kirkwood BootROM from v0 image. It it documented in A38x
and A39x Functional Specification.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 21 Oct 2021 14:46:09 +0000 (16:46 +0200)]
arm: mvebu: Remove dummy BIN header arguments for SPL binary
U-Boot SPL binary does not read BIN header arguments, so passing some dummy
values 0000005b and 00000068 has no effect for U-Boot SPL code.
Probably these two values comes from old Marvell DDR training code which
was separated from U-Boot and used it for some configuration.
Seems that two 32-bit values were specified here to ensure SPL code
alignment to 128-bit boundary as it is required e.g. for A370 or AXP
processors. Main kwbimage header is 64-byte long which is aligned to
128-bit boundary. Optional kwbheader is 32-bit long, number of BIN header
arguments is stored in 32-bit number. So for alignment to 128-bit boundary
is needed 64-bit padding which exactly these two 32-bit dummy arguments
provided.
Now when mkimage correctly aligns start of executable code in BIN header to
128-bit boundary, there is no requirement to put dummy argument values into
kwbimage. So remove them.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 21 Oct 2021 14:46:07 +0000 (16:46 +0200)]
tools: kwbimage: Align BIN header executable code to 128-bit boundary
ARM executable code inside the BIN header on some mvebu platforms
(e.g. A370, AXP) must always be aligned with the 128-bit boundary. This
requirement can be met by inserting dummy arguments into BIN header.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 21 Oct 2021 14:46:06 +0000 (16:46 +0200)]
tools: kwboot: Align UART baudrate change code in BIN header to 128-bit boundary
ARM executable code inside the BIN header on some mvebu platforms
(e.g. A370, AXP) must always be aligned with the 128-bit boundary. This
requirement can be met by inserting dummy arguments into BIN header.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Ilias Apalodimas [Tue, 26 Oct 2021 06:12:33 +0000 (09:12 +0300)]
sandbox: Remove OF_HOSTFILE
OF_HOSTFILE is used on sandbox configs only. Although it's pretty
unique and not causing any confusions, we are better of having simpler
config options for the DTB.
So let's replace that with the existing OF_BOARD. U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Fri, 22 Oct 2021 15:05:47 +0000 (17:05 +0200)]
lib: uuid: fix the test on RNG device presence
Correct the test on RNG device presence,when ret is equal to 0,
before to call dm_rng_read function.
Without this patch the RNG device is not used when present (when ret == 0)
or a data abort occurs in dm_rng_read when CONFIG_DM_RNG is activated but
the RNG device is not present in device tree (ret != 0 and devp = NULL).
Fixes: 92fdad28cfdf ("lib: uuid: use RNG device if present") CC: Matthias Brugger <mbrugger@suse.com> CC: Torsten Duwe <duwe@suse.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
cmd: nand biterr - Add support for nand biterr command
The command shall be used to induce bit errors in the nand page
manually. The code flips a bit in the specified offset without
changing the ECC. This helps to see how the software handles the
error.
The patch is ported from
https://patchwork.ozlabs.org/project/uboot/patch/\ 1325691123-19565-1-git-send-email-holger.brunck@keymile.com
The implementation is inspired from
'mtd-utils/nand-utils/nandflipbits.c'
Masahisa Kojima [Tue, 26 Oct 2021 08:27:24 +0000 (17:27 +0900)]
efi_loader: add SMBIOS table measurement
TCG PC Client Platform Firmware Profile Specification
requires to measure the SMBIOS table that contains static
configuration information (e.g. Platform Manufacturer
Enterprise Number assigned by IANA, platform model number,
Vendor and Device IDs for each SMBIOS table).
The device- and environment-dependent information such as
serial number is cleared to zero or space character for
the measurement.
Existing smbios_string() function returns pointer to the string
with const qualifier, but exisintg use case is updating version
string and const qualifier must be removed.
This commit removes const qualifier from smbios_string()
return value and reuses to clear the strings for the measurement.
This commit also fixes the following compiler warning:
lib/smbios-parser.c:59:39: warning: cast to pointer from integer of
different size [-Wint-to-pointer-cast]
const struct smbios_header *header = (struct smbios_header *)entry->struct_table_address;
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Ricardo Salveti [Wed, 20 Oct 2021 12:12:06 +0000 (15:12 +0300)]
arm: spl: prepare for jumping to OPTEE
Make sure to (if applicable) flush the D-cache, invalidate I-cache,
and disable MMU and caches before jumping to OPTEE.
This fixes the SDP->SPL->OPTEE boot flow on iMX6Q and most likely on
some other ARM SoCs.
projects / u-boot.git / log