Simon Glass [Sun, 23 Jun 2024 17:55:02 +0000 (11:55 -0600)]
binman: efi: Correct entry docs
Somehow the class documentation has got out of sync with the generated
entries.rst file. Regenerating it causes errors, so correct these and
regenerate the entries.rst file.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 809f28e7213 ("binman: capsule: Use dumped capsule header...")
Ilias Apalodimas [Tue, 18 Jun 2024 17:28:20 +0000 (20:28 +0300)]
configs: enable setvariable at runtime on sandbox
We currently don't have any boards enabling CONFIG_EFI_RT_VOLATILE_STORE.
We do have EFI selftests testing the feature though, so enable it in
all the sandbox platforms and test the functionality properly
Ilias Apalodimas [Mon, 17 Jun 2024 15:14:18 +0000 (18:14 +0300)]
sandbox: cleanup linker scripts and sections
commit 6e2228fb052b ("Merge patch series "Clean up arm linker scripts"")
was cleaning up linker scripts for armv7 and v8 in a similar fashion.
Several commits in the past -- e.g
commit d0b5d9da5de2 ("arm: make _end compiler-generated")
was moving symbols to be compiler generated. They were defined as c
variables in its own section to force the compiler emit relative a
reference. However, defining those in the linker script will do the
same thing since [0].
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c, and define them as a symbols.
It's worth noting that the linker was discarding the symbols in the
older binary completely since the symbol definition had an extra _.
- new binary
$~ aarch64-linux-gnu-readelf -sW u-boot | grep efi_runtim
246: 000000000004acbe 13 FUNC LOCAL DEFAULT 14 vbe_req_efi_runtime_rand
3198: 0000000000318690 16 OBJECT LOCAL DEFAULT 29 efi_runtime_mmio
6359: 00000000000dedff 217 FUNC LOCAL DEFAULT 14 efi_runtime_relocate
7942: 00000000003074c0 136 OBJECT GLOBAL HIDDEN 29 efi_runtime_services
8869: 0000000000305e20 0 NOTYPE GLOBAL DEFAULT 27 __efi_runtime_rel_stop
9159: 0000000000305e20 0 NOTYPE GLOBAL DEFAULT 27 __efi_runtime_stop
9410: 0000000000305e20 0 NOTYPE GLOBAL DEFAULT 27 __efi_runtime_start
10137: 00000000005981bd 0 NOTYPE WEAK HIDDEN 33 efi_runtime.c.de5bed54
10470: 0000000000305e20 0 NOTYPE GLOBAL DEFAULT 27 __efi_runtime_rel_start
- old binary
$~ aarch64-linux-gnu-readelf -sW u-boot.old | grep efi_runtim
246: 000000000004acbe 13 FUNC LOCAL DEFAULT 14 vbe_req_efi_runtime_rand
3198: 0000000000318690 16 OBJECT LOCAL DEFAULT 29 efi_runtime_mmio
6359: 00000000000dedff 221 FUNC LOCAL DEFAULT 14 efi_runtime_relocate
7942: 00000000003074c0 136 OBJECT GLOBAL HIDDEN 29 efi_runtime_services
10135: 0000000000598320 0 NOTYPE WEAK HIDDEN 33 efi_runtime.c.de5bed54
$~ bloat-o-meter u-bool.old u-boot
add/remove: 0/0 grow/shrink: 1/1 up/down: 7/-4 (3)
Function old new delta
efi_memory_init 343 350 +7
efi_runtime_relocate 221 217 -4
Total: Before=2009902, After=2009905, chg +0.00%
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> # sandbox_defconfig on amd64, arm64, riscv64 Reviewed-by: Simon Glass <sjg@chromium.org> Fixes: commit aac53d3d96a2 ("sandbox: Rename EFI runtime sections") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Quentin Schulz [Tue, 11 Jun 2024 13:04:26 +0000 (15:04 +0200)]
dm: core: migrate debug() messages to use dm_warn
Prior to that, seeing the debug() messages required to enable DM_DEBUG
which defines DEBUG (and then _DEBUG) which in turn makes failing
assert() calls reset U-Boot which isn't necessarily what is desired.
Instead, let's migrate to dm_warn which is using log_debug when unset or
log_warn when set.
While at it, reword the DM_DEBUG symbol in Kconfig to explain what it
now actually does.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Quentin Schulz [Tue, 11 Jun 2024 13:04:25 +0000 (15:04 +0200)]
dm: core: fix signedness in debug messages
outp always point to an unsigned type in ofnode_read_u* functions but
the format specifier is currently always using signed type.
This is an issue since the signed type can only contain half of the
unsigned type values above 0.
However, this now breaks another usecase. Indeed,
ofnode_read_s32_default is actually passing an s32 but it'll be printed
as a u32 instead. But since the function is called u32, it makes more
sense to have it print an unsigned value.
This was discovered because arm,smc-id = <0x82000010>; on RK3588S is
above the max signed value and therefore would return a negative signed
decimal value instead of its proper unsigned one.
Fixes: fa12dfa08a7b ("dm: core: support reading a single indexed u64 value") Fixes: 4bb7075c830c ("dm: core: support reading a single indexed u32 value") Fixes: 7e5196c409f1 ("dm: core: Add ofnode function to read a 64-bit int") Fixes: 9e51204527dc ("dm: core: Add operations on device tree references") Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Quentin Schulz [Tue, 11 Jun 2024 13:04:24 +0000 (15:04 +0200)]
dm: core: fix misleading debug message when matching compatible
A driver can have multiple compatible. When the id->compatible matches
for that driver, the first compatible supported by the driver is
currently returned, which gives the following confusing message:
- found match at 'rk3588_syscon': 'rockchip,rk3588-sys-grf' matches 'rockchip,rk3588-pmugrf'
Considering that the compatible passed in argument is necessarily the
one that exactly matched to enter this code path, there's no need to do
some elaborate logic, just print the driver name and the compatible
passed in argument.
Fixes: d3e773613b6d ("dm: core: Use U-Boot logging instead of pr_debug()") Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Rasmus Villemoes [Mon, 27 May 2024 20:04:17 +0000 (22:04 +0200)]
global_data.h: drop write-only field dm_root_f
The dm_root_f field seems to be entirely write-only and hence
redundant, unless 'git grep' fails to find some access generated via
preprocessor token concatenation or similar.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
Jonathan Liu [Sat, 25 May 2024 08:10:53 +0000 (18:10 +1000)]
sandbox: enable support for the unlz4 command
This does not work with sandbox at present. Fix it up to use map_sysmem()
to convert an address to a pointer.
Signed-off-by: Jonathan Liu <net147@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Fix conflict and reformat to 80cols: Signed-off-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Fri, 19 Apr 2024 02:36:32 +0000 (22:36 -0400)]
patman: Add a tag for when a patch gets added to a series
When a patch is added to a series after the initial version, there are no
changes to note except that it is new. This is typically done to suppress
the "(no changes in vN)" message. It's also nice to add a change to the
cover letter so reviewers know there is an additional patch. Add a tag to
automate this process a bit.
There are two nits with the current approach:
- It favors '-' as a bullet point, but some people may prefer '*' (or
something else)
- Tags (e.g. 'patman: ' in 'patman: foo bar') are not stripped. They are
probably just noise in most series, but they may be useful for treewide
series to distinguish 'gpio: frobnicate' from 'reset: frobnicate', so
I've left them in.
Suggestions for the above appreciated.
Suggested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org>
Sean Anderson [Fri, 19 Apr 2024 02:36:31 +0000 (22:36 -0400)]
patman: Add Commit-cc as an alias for Patch-cc
Most tags referring to commits (or patches) are named Commit-something. The
exception is Patch-cc. Add a Commit-cc alias so we can use whichever one is
convenient.
Sean Anderson [Fri, 19 Apr 2024 02:36:30 +0000 (22:36 -0400)]
patman: Fix tests if add_maintainers is set to False
If add_maintainers is set to False in the user's ~/.patman config, it will
cause the custom_get_maintainer_script to fail since that test expects
maintainers to be added. Set add_maintainer to True in the .patman config
to prevent this.
Fixes: 8c042fb7f9f ("patman: add '--get-maintainer-script' argument") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
We should have a single place where we write the default value to the
creator revision field. If we ever will have any table created by another
tool, we can overwrite the value afterwards.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
When writing an executable, allowing other users to modify it introduces
a security issue.
Generally we should avoid giving other users write access to our files by
default.
Replace chmod(777) by chmod(755) and chmod(644).
Fixes: 47f5fcfb4169 ("sandbox: Add os_jump_to_image() to run another executable") Fixes: d9165153caea ("sandbox: add flags for open() call") Fixes: 5c2859cdc302 ("sandbox: Allow reading/writing of RAM buffer") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
Tom Rini [Mon, 1 Jul 2024 01:03:14 +0000 (19:03 -0600)]
Revert "Merge patch series "zlib: Address CVE-2016-9841""
This series brings our zlib code more up to date. However, it drops an
important performance improvement that is required on some of our
supported platforms in order to boot Linux before the watchdog resets
the system. Furthermore, the "post increment" version of this
performance loop was not tested, so while we can fix it, it would then
require re-testing all platforms. At this point in time, we will revert
updating zlib (which has had a potential security issue since 2016) and
fix this in the v2024.10 release.
Tom Rini [Sun, 30 Jun 2024 16:59:42 +0000 (10:59 -0600)]
Merge tag 'efi-2024-10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-2024-10-rc1
Documentation:
Update requirements.txt to use current Python module versions
Add a page describing debugging U-Boot with GDB
FIT: describe data-size as a conditionally mandatory property
Correct link to FIT specification in SPL code.
Correct kaslrseed command long text description
UEFI:
Add unit test checking that don't have kaslr-seed when measuring boot
Deduplicate code for measured boot.
Alexander Dahl [Wed, 26 Jun 2024 10:47:18 +0000 (12:47 +0200)]
doc: develop: Add a general section on gdb usage
Mashed up from different sources linked below, including the now gone
Wiki and doc/README.arm-relocation file. Tested on a custom board with
AT91 SAMA5D2 SoC and Segger J-Link Base adapter. This is only generic
advice here, the usage is not board specific. Some board docs have more
specific instructions on using gdb with a particular board.
Bastian Germann [Mon, 24 Jun 2024 17:00:38 +0000 (19:00 +0200)]
doc: fit: Make data-size a conditionally mandatory property
Before 9d0750064e (doc: Move external FIT docs into the main body), the
FIT property data-size was not a mandatory property and still it is not
expected to be set alongside the data property.
Move the data-size property to the "Conditionally mandatory property"
section, where it actually belongs.
Signed-off-by: Bastian Germann <bage@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias Apalodimas [Sun, 23 Jun 2024 11:48:18 +0000 (14:48 +0300)]
tpm: allow the user to select the compiled algorithms
Simon reports that after enabling all algorithms on the TPM some boards
fail since they don't have enough storage to accommodate the ~5KB growth.
The choice of hash algorithms is determined by the platform and the TPM
configuration. Failing to cap a PCR in a bank which the platform left
active is a security vulnerability. It might allow unsealing of secrets
if an attacker can replay a good set of measurements into an unused bank.
If MEASURED_BOOT or EFI_TCG2_PROTOCOL is enabled our Kconfig will enable
all supported hashing algorithms. We still want to allow users to add a
TPM and not enable measured boot via EFI or bootm though and at the same
time, control the compiled algorithms for size reasons.
So let's add a function tpm2_allow_extend() which checks the TPM active
PCRs banks against the one U-Boot was compiled with. We only allow
extending PCRs if the algorithms selected during build match the TPM
configuration.
It's worth noting that this is only added for TPM2.0, since TPM1.2 is
lacking a lot of code at the moment to read the available PCR banks.
We unconditionally enable SHA1 when a TPM is selected, which is the only
hashing algorithm v1.2 supports.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> # chromebook-link
Ilias Apalodimas [Sun, 23 Jun 2024 11:48:17 +0000 (14:48 +0300)]
tpm: Untangle tpm2_get_pcr_info()
This function was used on measured boot to retrieve the number of active
PCR banks and was designed to work with the TCG protocols.
Since we now have the need to retrieve the active PCRs outside the
measured boot context -- e.g use the in the command line, decouple the
function.
Create one that will only adheres to TCG TSS2.0 [0] specification called
tpm2_get_pcr_info() which can be used by the TPM2.0 APIs and a new one that
is called from the measured boot context called tcg2_get_pcr_info()
Ilias Apalodimas [Sun, 23 Jun 2024 11:48:14 +0000 (14:48 +0300)]
tpm: Move TCG headers into a separate file
commit 97707f12fdab ("tpm: Support boot measurements") moved out code
from the EFI subsystem into the TPM one to support measurements when
booting with !EFI.
Those were moved directly into the TPM subsystem and in the tpm-v2.c
library. In hindsight, it would have been better to move it in new
files since the TCG2 is governed by its own spec, it's overeall cleaner
and also easier to enable certain parts of the TPM functionality.
So let's start moving the headers in a new file containing the TCG
specific bits.
Ilias Apalodimas [Sun, 23 Jun 2024 11:48:13 +0000 (14:48 +0300)]
efi_loader: remove unused TCG algo definitions
commit 97707f12fdab ("tpm: Support boot measurements") moved some of the
EFI TCG code to the TPM subsystem. Those definitions are now in tpm-v2.h.
Let's remove the stale entries
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tom Rini [Fri, 28 Jun 2024 23:31:28 +0000 (17:31 -0600)]
Merge patch series "automatically add /chosen/kaslr-seed and deduplicate code"
Tim Harvey <tharvey@gateworks.com> says:
This series will automatically add /chosen/kaslr-seed to the dt if
DM_RNG is enabled
during the boot process.
If RANDOMIZE_BASE is enabled in the Linux kernel instructing it to
randomize the virtual address at which the kernel image is loaded, it
expects entropy to be provided by the bootloader by populating
/chosen/kaslr-seed with a 64-bit value from source of entropy at boot.
If we have DM_RNG enabled populate this value automatically when
fdt_chosen is called. We skip this if ARMV8_SEC_FIRMWARE_SUPPORT
is enabled as its implementation uses a different source of entropy
that is not yet implemented as DM_RNG. We also skip this if
MEASURED_BOOT is enabled as in that case any modifications to the
dt will cause measured boot to fail (although there are many other
places the dt is altered).
As this fdt node is added elsewhere create a library function and
use it to deduplicate code. We will provide a parameter to overwrite
the node if present.
For our automatic injection, we will use the first rng device and
not overwrite if already present with a non-zero value (which may
have been populated by an earlier boot stage). This way if a board
specific ft_board_setup() function wants to customize this behavior
it can call fdt_kaslrseed with a rng device index of its choosing and
set overwrite true.
Note that the kalsrseed command (CMD_KASLRSEED) is likely pointless now
but left in place in case boot scripts exist that rely on this command
existing and returning success. An informational message is printed to
alert users of this command that it is likely no longer needed.
Note that the Kernel's EFI STUB only relies on EFI_RNG_PROTOCOL for
randomization and completely ignores the kaslr-seed for its own
randomness needs (i.e the randomization of the physical placement of
the kernel). It gets weeded out from the DTB that gets handed over via
efi_install_fdt() as it would also mess up the measured boot DTB TPM
measurements as well.
Tim Harvey [Tue, 18 Jun 2024 21:06:09 +0000 (14:06 -0700)]
test: cmd: fdt: fix chosen test for DM_RNG
Now that kaslr-seed is automatically added to the chosen node if DM_RNG
is enabled, adjust the test to expect this.
Take care not to expect kaslr-seed for CONFIG_MEASURED_BOOT and
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT as we do not add it for those.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Cc: Michal Simek <michal.simek@amd.com> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Akash Gajjar <gajjar04akash@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Devarsh Thakkar <devarsht@ti.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Hugo Villeneuve <hvilleneuve@dimonoff.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Chris Morgan <macromorgan@hotmail.com>
Tim Harvey [Tue, 18 Jun 2024 21:06:08 +0000 (14:06 -0700)]
use fdt_kaslrseed function to de-duplicate code
Use the fdt_kaslrseed function to deduplicate code doing the same thing.
Note that the kalsrseed command (CMD_KASLRSEED) is likely pointless now
but left in place in case boot scripts exist that rely on this command
existing and returning success. An informational message is printed to
alert users of this command that it is likely no longer needed.
Note that the Kernel's EFI STUB only relies on EFI_RNG_PROTOCOL for
randomization and completely ignores the kaslr-seed for its own
randomness needs (i.e the randomization of the physical placement of
the kernel). It gets weeded out from the DTB that gets handed over via
efi_install_fdt() as it would also mess up the measured boot DTB TPM
measurements as well.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@amd.com> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Akash Gajjar <gajjar04akash@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Devarsh Thakkar <devarsht@ti.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Hugo Villeneuve <hvilleneuve@dimonoff.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Chris Morgan <macromorgan@hotmail.com> Acked-by: Michal Simek <michal.simek@amd.com>
Tim Harvey [Tue, 18 Jun 2024 21:06:07 +0000 (14:06 -0700)]
fdt: automatically add /chosen/kaslr-seed if DM_RNG is enabled
If RANDOMIZE_BASE is enabled in the Linux kernel instructing it to
randomize the virtual address at which the kernel image is loaded, it
expects entropy to be provided by the bootloader by populating
/chosen/kaslr-seed with a 64-bit value from source of entropy at boot.
If we have DM_RNG enabled populate this value automatically when
fdt_chosen is called. We skip this if ARMV8_SEC_FIRMWARE_SUPPORT
is enabled as its implementation uses a different source of entropy
that is not yet implemented as DM_RNG. We also skip this if
MEASURED_BOOT is enabled as in that case any modifications to the
dt will cause measured boot to fail (although there are many other
places the dt is altered).
Note that the Kernel's EFI STUB only relies on EFI_RNG_PROTOCOL for
randomization and completely ignores the kaslr-seed for its own
randomness needs (i.e the randomization of the physical placement of
the kernel). It gets weeded out from the DTB that gets handed over via
efi_install_fdt() as it would also mess up the measured boot DTB TPM
measurements as well.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@amd.com> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Akash Gajjar <gajjar04akash@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Devarsh Thakkar <devarsht@ti.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Hugo Villeneuve <hvilleneuve@dimonoff.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Chris Morgan <macromorgan@hotmail.com>
Tim Harvey [Tue, 18 Jun 2024 21:06:06 +0000 (14:06 -0700)]
Add fdt_kaslrseed function to add kaslr-seed to chosen node
If RANDOMIZE_BASE is enabled in the Linux kernel instructing it to
randomize the virtual address at which the kernel image is loaded, it
expects entropy to be provided by the bootloader by populating
/chosen/kaslr-seed with a 64-bit value from source of entropy at boot.
Add a fdt_kaslrseed function to accommodate this allowing an existing
node to be overwritten if present. For now use the first rng device
but it would be good to enhance this in the future to allow some sort
of selection or policy in choosing the rng device used.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@amd.com> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Akash Gajjar <gajjar04akash@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Devarsh Thakkar <devarsht@ti.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Hugo Villeneuve <hvilleneuve@dimonoff.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Tom Rini [Fri, 28 Jun 2024 19:55:10 +0000 (13:55 -0600)]
Merge patch series "Bug-fixes for a few boards (reduced series)"
Simon Glass <sjg@chromium.org> says:
This series includes fixes to get some rockchip and nvidia boards
working again. It also drops the broken Beaglebone Black config and
provides a devicetree fix for coral (x86).
Simon Glass [Thu, 27 Jun 2024 08:29:48 +0000 (09:29 +0100)]
rockchip: bob: kevin: Disable dcache in SPL
This causes a hang, so disable it. Unfortunately the RAM-size fix does
not resolve the problem and I am unsure what is wrong. As soon as the
cache is enabled the board appears to hang.
Fixes: 6d8cdfd1536 ("rockchip: spl: Enable caches to speed up checksum validation") Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 27 Jun 2024 08:29:46 +0000 (09:29 +0100)]
power: regulator: Handle autoset in regulators_enable_boot_on()
With a recent change, regulators_enable_boot_on() returns an error if a
regulator is already set. Check for and handle this situation.
Fixes: d99fb64a98a power: regulator: Only run autoset once for each regulator Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Simon Glass [Thu, 27 Jun 2024 08:29:44 +0000 (09:29 +0100)]
x86: Set a board-size limit for chromebook_link
Set a size limit for this board so that we get a build error if it grows
too much.
Note that the limit is approximately, since it does not include the FDT,
microcode and fdtmap, which can change in size. However this board is
fairly stable, so overflowing this limit will likely result in the image
not fitting in the ROM space available for U-Boot.
Simon Glass [Thu, 27 Jun 2024 08:29:43 +0000 (09:29 +0100)]
tpm: Avoid code bloat when not using EFI_TCG2_PROTOCOL
It does not make sense to enable all SHA algorithms unless they are
needed. It bloats the code and in this case, causes chromebook_link to
fail to build. That board does use the TPM, but not with measured boot,
nor EFI.
Since EFI_TCG2_PROTOCOL already selects these options, we just need to
add them to MEASURED_BOOT as well.
Note that the original commit combines refactoring and new features,
which makes it hard to see what is going on.
Fixes: 97707f12fda tpm: Support boot measurements Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 27 Jun 2024 08:29:42 +0000 (09:29 +0100)]
nvidia: nyan-big: Disable debug UART
This cannot be enabled early in boot since some other init is needed.
At this point it is unclear exactly what init is needed, so disable
the debug UART to avoid a hang.
Simon Glass [Wed, 19 Jun 2024 12:34:52 +0000 (06:34 -0600)]
zboot: Correct use of state_mask argument
There is confusion in this function between the flag and state_mask
parameters, which prevents the boot from actually happening. Correct
this by using state_mask instead of flag for deciding which states to go
through.
This fixes booting of some 32-bit Debian kernels.
Note: Some sort of CI for this is in the works.
Fixes: 228c6722d44 ("x86: zboot: Avoid iteration in do_zboot_states()") Signed-off-by: Simon Glass <sjg@chromium.org>
Sam Protsenko [Wed, 19 Jun 2024 21:23:30 +0000 (16:23 -0500)]
cmd: gpt: Fix freeing gpt_pte in gpt_verify()
In case when either gpt_verify_headers() or gpt_verify_partitions()
fails, the memory allocated for gpt_pte will be freed in those functions
internally, but gpt_pte will still contain non-NULL dangling pointer.
The attempt to free it in those cases in gpt_verify() leads to "use
after free" error, which leads to a "Synchronous abort" exception.
This issue was found by running the next command on the device with
incorrect partition table:
=> gpt verify mmc 0 $partitions
which results to:
No partition list provided - only basic check
"Synchronous Abort" handler, esr 0x96000021, far 0xba247bff
....
Fix the issue by only freeing gpt_pte if none of those functions failed.
Fixes: bbb9ffac6066 ("gpt: command: Extend gpt command to support GPT table verification") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tom Rini [Wed, 19 Jun 2024 16:09:44 +0000 (10:09 -0600)]
cmd: Make use of U_BOOT_LONGHELP when missing
After adding the U_BOOT_LONGHELP macro some new commands came in still
that were not making use if it. Switch these cases over and in a few
places add missing newlines as well.
Emil Kronborg [Wed, 19 Jun 2024 11:00:01 +0000 (11:00 +0000)]
arm: davinci: remove unused defines
The last usage of the DV_TIMER_ and DV_WDT_ definitions were removed in
commits 8d7757637138 ("ARM: davinci: remove support for cam_enc_4xx")
and cef443c1666c ("arm: davinci: remove leftover code for dm* SoCs"),
respectively.
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
Emil Kronborg [Wed, 19 Jun 2024 10:57:49 +0000 (10:57 +0000)]
arm: davinci: remove unused watchdog functions
The davinci_hw_watchdog_ functions are defined but never called from
anywhere. Commit 881ae794b93b ("calimain: remove board") eliminated the
last call to these functions.
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
Alex Shumsky [Tue, 18 Jun 2024 21:41:38 +0000 (00:41 +0300)]
fs: btrfs: fix out of bounds write
Fix btrfs_read/read_and_truncate_page write out of bounds of destination
buffer. Old behavior break bootstd malloc'd buffers of exact file size.
Previously this OOB write have not been noticed because distroboot usually
read files into huge static memory areas.
Tom Rini [Wed, 26 Jun 2024 15:55:29 +0000 (09:55 -0600)]
Merge patch series "k3-am625-beagleplay: Add symlinks for tiboot3 and tispl"
Dhruva Gole <d-gole@ti.com> says:
Add symlinks for both tiboot3.bin and tispl.bin because a user has to
anyway rename these files to get the platform to boot up.
Also update the documentation to reflect above change.
Dhruva Gole [Tue, 18 Jun 2024 04:49:45 +0000 (10:19 +0530)]
arm: dts: k3-am625-beagleplay: Add symlinks for tiboot3 and tispl
Add symlinks for both tiboot3.bin and tispl.bin because a user has to
anyway rename these files to get the platform to boot up.
This just makes it more intuitive and convenient.
Dhruva Gole [Tue, 18 Jun 2024 04:53:18 +0000 (10:23 +0530)]
board: beagleplay: Fix the bootpart to pick from root partition
The Kernel Image and DTB files are supposed to be picked from the rootfs
of the SD Card, this fails in legacy boot flow because bootpart is set
to 1:1. Fix it.
MCU_CLKOUT0 output can be driven by two different clock inputs:
one at 25 MHz and another at 50 MHz. Currently, the 25 MHz input
clock is not selectable due to a duplication of the 50 MHz clock input
in the mux configuration. This commit corrects the parent clock mux
configuration, making the 25 MHz input clock selectable.
Tom Rini [Wed, 26 Jun 2024 15:31:05 +0000 (09:31 -0600)]
Merge patch series "Azure: Correct comment about the strategy in the world matrix build"
Tom Rini <trini@konsulko.com> says:
This fixes a number of small issues with the structure of the Azure jobs
and then ensures that we will build all of the possible boards that we
know about, in this CI run.
Tom Rini [Tue, 18 Jun 2024 14:18:51 +0000 (08:18 -0600)]
Azure: Count all of the machines we would build
Now that we have each stage of the world build using variables to define
what it will attempt to build, and that we have added in missing
machines, add a job to make sure that we would always be building
everything.
Tom Rini [Tue, 18 Jun 2024 14:18:50 +0000 (08:18 -0600)]
Azure: Update some job breakdowns so we build the world again
As part of commit 9aeac898da66 ("Azure: Rework build the world jobs") I
made a few mistakes. An errant '_' meant that we built neither at91 nor
kirkwood platforms. Further, the non-freescale (NXP) "LS1xxx" platforms
were also not being built. Adjust some jobs to have these be built
again.
Fixes: 9aeac898da66 ("Azure: Rework build the world jobs") Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 18 Jun 2024 14:18:49 +0000 (08:18 -0600)]
Azure: Spell out the "everything" job
In order to get the list of boards that will be done in a "dry run"
build we need to have something listed and not just an exclude list.
Populate the job with all architecture directories except arm and
powerpc.
Tom Rini [Tue, 18 Jun 2024 14:18:48 +0000 (08:18 -0600)]
Azure: Rework how we define what to build in the world build
Instead of defining BUILDMAN to the value we'll build in each part of
the matrix job, define a variable with that name and have it list what
to build. This will allow us to reference these multiple times
consistently later on.
Tom Rini [Tue, 18 Jun 2024 14:18:47 +0000 (08:18 -0600)]
Azure: Correct comment about the strategy in the world matrix build
At this point noting that we have a split in our job similar to TravisCI
(which we have not used in years) isn't helpful, and is also not true
anymore either. Instead, explain that we split the world up in to 10
jobs as that's the maximum we can have going in parallel on the free
tier of Azure.
Tom Rini [Tue, 25 Jun 2024 23:22:36 +0000 (17:22 -0600)]
Merge patch series "arm64: add a software pagetable walker"
Caleb Connolly <caleb.connolly@linaro.org> says:
MMU issues are some of the most frustrating to debug. To make this
slightly less unbearable, introduce a software pagetable walker for
ARMv8. This can be called to dump a pagetable with the default
formatter, or a custom callback can be provided to implement more
complicated parsing.
This can also be useful to dump the pagetable used by a previous
bootloader stage (by reading out the ttbr register).
Here is an example of the output when walking U-Boot's own memory map
on a Qualcomm RB3 board:
Caleb Connolly [Mon, 17 Jun 2024 08:03:48 +0000 (10:03 +0200)]
arm64: add software pagetable walker
Add a basic software implementation of the ARM64 pagetable walker. This
can be used for debugging U-Boot's pagetable, as well as dumping the
pagetable from the previous bootloader stage if it used one (by reading
out the ttbr address).
One can either call dump_pagetable() to print the pagetable to the
console with the default formatter, or implement their own pagetable
handler using walke_pagetable() with a custom pte_walker_cb_t callback.
All of the added code is discarded when unused, hence there is no need
to add an additional Kconfig option for this.
Neil Armstrong [Thu, 20 Jun 2024 07:42:50 +0000 (09:42 +0200)]
phy: meson-gxl-usb2: add set_mode callback
Implement set_mode callback by calling the current public
function, use a temporary function name that will be removed
when the public phy_meson_gxl_usb2_set_mode is finally removed
in a following change.
Bryan Brattlof [Wed, 19 Jun 2024 19:12:30 +0000 (14:12 -0500)]
board: beagle: beagleplay: enable OF_SYSTEM_SETUP
Unfortunately when enabling FDT fixups for the AM62x family of SoCs and
moving TF-A to the bottom of RAM we missed the BeaglePlay. This is
causing Linux's memory allocator to clobber TF-A and break its boot.
Enable OF_SYSTEM_SETUP to fixup the kernel's FDT to inform it of the
actual location of the firmware
CC: Andrew Davis <afd@ti.com> CC: Nishanth Menon <nm@ti.com> CC: Robert Nelson <robertcnelson@gmail.com> Reported-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Bryan Brattlof <bb@ti.com> Acked-by: Andrew Davis <afd@ti.com> Tested-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Nishanth Menon <nm@ti.com> Acked-by: Chirag Shilwant <c-shilwant@ti.com> Tested-by: Dhruva Gole <d-gole@ti.com>
- Enable SPL DTO application support for i.MX8MP DHCOM PDK2.
- Migrate imx8mn_bsh_smm_s2 and imx6ulz_bsh_smm_m2 to OF_UPSTREAM.
- Drop redundant imports with dts/upstream.
- Miscellaneous improvements for Gateworks i.MX8M boards.
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:39 +0000 (18:14 +0530)]
arm: mach-k3: j784s4: Enable QoS for DSS
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 9.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.9.2.10 "Quality of Service" in TRM[0])
Section 3.2.1 "Quality of Service (QoS)" in the TRM[0] provide more
details.
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:38 +0000 (18:14 +0530)]
arm: mach-k3: j721s2: Enable QoS for DSS
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 9.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.9.2.10 "Quality of Service" in TRM[0])
Section 3.2.1 "Quality of Service (QoS)" in the TRM[0] provide more
details.
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:37 +0000 (18:14 +0530)]
arm: mach-k3: j721e: Enable QoS for DSS
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 7.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.10.1.2 "NB Parameters" in TRM[0])
Section 3.3.2 "Quality of Service (QoS)" in the TRM[0] provide more
details.
[0]: https://www.ti.com/lit/zip/spruil1
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Reviewed-by: Andrew Davis <afd@ti.com>
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:36 +0000 (18:14 +0530)]
arm: mach-k3: am62a: Simplify the logic for QOS reg and val propagation
For the QOS registers, instead of using the raw values for calculation
for each reg field, use a defined macro which takes in argument for all
the reg fields to get the desired value.
Do the similar simplification for QOS register and group registers and
make the corresponding changes for am62a_qos_uboot file.
Suggested-by: Andrew Davis <afd@ti.com> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Acked-by: Andrew Davis <afd@ti.com>
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:35 +0000 (18:14 +0530)]
arm: mach-k3: am62a_qos: Move common bit MACROS to k3_qos header file
QoS bit mapping are common across all K3 SoCs so move those defines
to common header file (k3_qos.h).
This ensures that we do not define these for each SoC.
Tom Rini [Mon, 24 Jun 2024 15:49:37 +0000 (09:49 -0600)]
Merge tag 'tpm-master-24062024' of https://source.denx.de/u-boot/custodians/u-boot-tpm
When the EFI TCG measurement code moved from EFI to the TPM subsystem for
general use some prototypes changed from returning efi_status_t to int,
which is more appropriate for the non-EFI APIs. However, some of the
EFI callsites never changed and we ended up assigning the int value to
efi_status_t.
This is unlikely to cause any problems, apart from returning invalid
values on failures and violating the EFI spec.
Marek Vasut [Sun, 23 Jun 2024 18:44:19 +0000 (20:44 +0200)]
ARM: imx: Enable SPL DTO application support for i.MX8MP DHCOM PDK2
Enable SPL DTO support to apply matching SoM specific DTOs to cater
for the SoM differences in DH i.MX8MP DHCOM PDK2 configuration. This
is already enabled in DH i.MX8MP DHCOM PDK3 configuration so align
the two configurations.
Fixes: ad1158c50e0e ("arm64: dts: imx8mp: Switch to DT overlays for i.MX8MP DHCOM SoM") Signed-off-by: Marek Vasut <marex@denx.de>
projects / u-boot.git / log