Simon Glass [Wed, 19 Jul 2023 23:48:28 +0000 (17:48 -0600)]
buildman: Provide an argument to the -R option
Allow writing the file to a selected location, since otherwise this is
controlled by the buildman configuration, so cannot be determined by the
caller.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: https://source.denx.de/u-boot/u-boot/-/issues/17
Simon Glass [Wed, 19 Jul 2023 23:48:21 +0000 (17:48 -0600)]
buildman: Detect boards with multiple CONFIG_TARGETs defined
The TARGET_xxx options are special in that they refer to a single target.
Exactly one should be enabled for each target, corresponding to a
defconfig file.
Detect configs which result in two TARGET_xxx options being set. For
example, at present, TARGET_POLEG and TARET_POLEG_EVB are enabled for the
same board.
Note: This warning is not displayed by default. An option will be added
to enable it.
This adds a new etype 'u-boot-spl-pubkey-dtb'. The etype adds the public
key from a certificate to the dtb. This creates a '/signature' node which
is turn contains the fields which make up the public key. Usually this
is done by 'mkimage -K'. However, 'binman sign' does not add the public
key to the SPL. This is why the pubkey is added using this etype.
The etype calls the underlying 'fdt_add_pubkey' tool.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
binman: blob_dtb: Add fake_size argument to ObtainContents()
The method 'connect_contents_to_file()' calls ObtainsContents() with
'fake_size' argument. Without providing the argument in the blob_dtb
we are not able to call this method without error.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
While signing a fit compressed data (i.e. 'blob-ext') is decompressed,
but never compressed again. When compressed data was wrapped in a
section, decompression leads to an error because the outer section had
the original compressed size but the inner entry has the
uncompressed size now.
While singing there is no reason to decompress data. Thus, decompression
should be disabled.
Furthermore, bintools should be collected before loading the data. This
way bintools are available if processing is required on a node.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
The new encrypted etype generates a cipher node in the device tree
that should not be evaluated by binman, but still be kept in the
output device tree.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Jul 2023 15:19:57 +0000 (09:19 -0600)]
binman: Tidy up tests for pre-load entry type
Drop the use of a numbered key file since numbering is just for the test
devicetree files. Also adjust the tests to avoid putting a hard-coded
path to binman in the file, using the entry arg instead.
Tom Rini [Fri, 21 Jul 2023 18:44:46 +0000 (00:14 +0530)]
CI: Make use of buildman requirements.txt
Now that buildman has a requirements.txt file we need to make use of it.
Reviewed-by: Simon Glass <sjg@chromium.org>
[n-francis@ti.com: Adding missing command from .azure-pipelines.yml] Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 21 Jul 2023 18:44:45 +0000 (00:14 +0530)]
buildman: Create a requirements.txt file
At this point, buildman requires a few different modules and so we need
a requirements.txt to track what modules are needed.
Cc: Simon Glass <sjg@chromium.org> Cc: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
Andrew Davis [Fri, 21 Jul 2023 18:44:44 +0000 (00:14 +0530)]
binman: Overwrite symlink if it already exists
Without this re-building will fail with an error when trying to create
the symlink for the second time with an already exists error.
Signed-off-by: Andrew Davis <afd@ti.com>
[n-francis@ti.com: Added support for test output dir and testcase] Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
doc: board: ti: Update documentation for binman flow
Earlier documentation specified builds for generating bootloader images
using an external TI repository k3-image-gen and core-secdev-k3. Modify
this to using the binman flow so that user understands how to build the
final boot images.
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[afd@ti.com: changed output binary names appropriately] Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[afd@ti.com: changed output binary names appropriately] Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[afd@ti.com: changed output binary names appropriately] Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[afd@ti.com: changed output binary names appropriately] Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[afd@ti.com: changed output binary names appropriately] Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[afd@ti.com: changed output binary names appropriately] Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
By providing entries in the binman node of the device tree, binman will
be able to find and package board config artifacts generated by
TIBoardConfig with sysfw.bin and generate the final image sysfw.itb.
It will also pick out the R5 SPL and sign it with the help of TI signing
entry and generate the final tiboot3.bin.
Entries for A72 build have been added to k3-j721e-binman.dtsi to
generate tispl.bin and u-boot.img.
Support has been added for both HS-SE(SR 1.1), HS-FS(SR 2.0) and GP images
In HS-SE, the encrypted system firmware binary must be signed along with
the signed certificate binary.
Reviewed-by: Simon Glass <sjg@chromium.org>
[afd@ti.com: changed output binary names appropriately] Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
j721e: schema: yaml: Add general schema and J721E board config files
Schema file in YAML must be provided in board/ti/common for validating
input config files and packaging system firmware. The schema includes
entries for rm-cfg, board-cfg, pm-cfg and sec-cfg.
Board config files must be provided in board/ti/<devicename> in YAML.
These can then be consumed for generation of binaries to package system
firmware. Added YAML configs for J721E in particular.
Signed-off-by: Tarun Sahu <t-sahu@ti.com>
[n-francis@ti.com: prepared patch for upstreaming] Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
arm: dts: k3: Add support for packaging sysfw.itb and tiboot3.bin
Board config binary artifacts must be generated to be used by binman to
package sysfw.itb and tiboot3.bin for all K3 devices.
For devices that follow combined flow, these board configuration
binaries must again be packaged into a combined board configuration
blobs to be used by binman to package tiboot3.bin.
Add common k3-binman.dtsi to generate all the board configuration
binaries needed.
Also add custMpk.pem and ti-degenerate-key.pem needed for signing GP and
HS bootloader images common to all K3 devices.
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
The ti-secure entry contains certificate for binaries that will be
loaded or booted by system firmware whereas the ti-secure-rom entry
contains certificate for binaries that will be booted by ROM. Support
for both these types of certificates is necessary for booting of K3
devices.
Reviewed-by: Simon Glass <sjg@chromium.org>
[vigneshr@ti.com: fixed inconsist cert generation by multiple packing] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
binman: ti-board-config: Add support for TI board config binaries
The ti-board-config entry loads and validates a given YAML config file
against a given schema, and generates the board config binary. K3
devices require these binaries to be packed into the final system
firmware images.
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Use config SPL_VIDEO_REMOVE to remove video driver at SPL stage before
jumping to next stage, in place of CONFIG_SPL_VIDEO, to allow user to
remove video if required.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
This is required since user may want to either call the remove method
of video driver and reset the display or not call the remove method
to continue displaying until next stage.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
common: board_f: Pass frame buffer info from SPL to u-boot
U-boot proper can use frame buffer address passed from SPL to reserve
the memory area used by framebuffer set in SPL so that splash image
set in SPL continues to get displayed while u-boot proper is running.
Put the framebuffer address and size in a bloblist to make them
available at u-boot proper, if in u-boot proper CONFIG_VIDEO is defined.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
board: ti: am62x: evm: Update function calls for splash screen
Use spl_dcache_enable, in place of setup_dram, arch_reserve_mmu to set
up pagetable, initialise DRAM and enable Dcache to avoid multiple
function calls.
Check for CONFIG_SPL_VIDEO in place of CONFIG_SPL_VIDEO_TIDSS to prevent
any build failure in case video config is not defined and video related
functions are called.
Check for CONFIG_SPL_SPLASH_SCREEN and CONFIG_SPL_BMP before calling
splash_display to avoid compilation failure.
arch: arm: mach-k3: common: Return a pointer after setting page table
In spl_dcache_enable after setting up page table, set gd->relocaddr
pointer to tlb_addr, to get next location to reserve memory. Align
tlb_addr with 64KB address.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
At SPL stage when stack is relocated, the stack pointer needs to be
updated, the stack pointer may point to stack in on chip memory even
though stack is relocated.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
arm: mach-k3: am62a7: change some prints to debug prints
There is little need to print the devstat information or when we exit a
function during a typical boot. Remove them to reduce the noise during
typical operation
ram: k3-ddrss: do not touch ctrl regs during training
During LPDDR initialization we will loop through a series of frequency
changes in order to train at the various operating frequencies. During
this training, accessing the DRAM_CLASS bitfield could happen during a
frequency change and cause the read to hang.
Store the DRAM type into the main structure to avoid multiple readings
while the independent phy is training.
Tom Rini [Mon, 17 Jul 2023 19:26:43 +0000 (15:26 -0400)]
arm: omap2: Fix warning in force_emif_self_refresh
The function declaration for force_emif_self_refresh takes no parameters
but does not specify this, only the prototype in the headers do. As
clang will warn about this, correct it.
arm: mach-k3: am62: Fixup CPU core, gpu and pru nodes in fdt
AM62x SoC is available in multiple variant:
- CPU cores (Cortex-A) AM62x1 (1 core), AM62x2 (2 cores), AM62x4 (4 cores)
- GPU AM625x with GPU, AM623x without GPU
- PRU (Programmable RT unit) can be present or not on AM62x2/AM62x4
Remove the relevant FDT nodes by reading the actual configuration
from the SoC registers, with that change is possible to have a single
dts/dtb file handling the different variant at runtime.
While removing GPU node and CPU nodes also the watchdog node
in the same Module Domain is removed.
A similar approach is implemented for example on i.MX8 and STM32MP1 SoC.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Add register address and relevant bitmasks and shifts.
Allow reading these information:
- device identification
- number of cores (part of device identification)
- features (currently: PRU / no PRU)
- security
- functional safety
- speed grade
- temperature grade
- package
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Davis <afd@ti.com>
arm: k3: Fix ft_system_setup so it can be enabled on any SoC
ft_system_setup cannot be enabled on SoC without msmc sram otherwise
fdt_fixup_msmc_ram function fails causing system reset.
Fix by moving fdt_fixup_msmc_ram to common_fdt.c file and creating
SoC (AM654, J721E and J721S2) specific files for fdt fixups.
This change was verified to not change anything on any existing board
(all the J721S2, AM654 and J721E boards requires it,
none of the remaining k3 boards require it).
Fixes: 30e96a240156 ("arm: mach-k3: Move MSMC fixup to SoC level") Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
arm: mach-k3: am62a7_init: Open up FSS_DAT_REG3 firewall
On security enforced (HS-SE) devices ROM firewalls OSPI data region3 that
is present in above 64bit region. Open this up in bootloader to allow
Linux to access OSPI flashes in mmap mode.
Without this kernel will crash when accessing this region due to
firewall violations on HS-SE devices.
Nikhil M Jain [Wed, 21 Jun 2023 10:59:53 +0000 (16:29 +0530)]
common: splash_source: Fix type casting errors
During compilation splash_source puts out below warning for type
conversion in splash_load_fit for bmp_load_addr and fit_header.
Change their type to uintptr_t to fix the warnings.
common/splash_source.c: In function ‘splash_load_fit’:
common/splash_source.c:366:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
366 | img_header = (struct legacy_img_hdr *)bmp_load_addr;
| ^
common/splash_source.c:376:49: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
376 | res = splash_storage_read_raw(location, (u32)fit_header, fit_size);
| ^
common/splash_source.c:401:25: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
401 | memmove((void *)bmp_load_addr, internal_splash_data, internal_splash_size);
The above warnings are generated if CONFIG_FIT is enabled.
Nikhil M Jain [Wed, 21 Jun 2023 10:59:52 +0000 (16:29 +0530)]
board: ti: am62x: evm: Include necessary header files
At the time of compilation evm.c gives below warning for implicit
declaration of enable_caches, to mitigate this include cpu_func.h.
board/ti/am62x/evm.c: In function ‘spl_board_init’:
board/ti/am62x/evm.c:90:9: warning: implicit declaration of function ‘enable_caches’ [-Wimplicit-function-declaration]
90 | enable_caches();
Tom Rini [Fri, 21 Jul 2023 14:01:11 +0000 (10:01 -0400)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
For once this adds USB support for two SoCs: the H616 and the F1C100s
series. The rest is support for LPDDR3 DRAM chips on H616 boards.
Gitlab CI passed, and I booted that briefly on an H616 and an F1C200s
board. I don't have an H616 board with LPDDR3 DRAM, but reportedly that
works for Mikhail, and doesn't regress on my DDR3 boards.
clk: zynqmp: Add gem rx and tsu clocks to return register
Add gem_tsu and gem0_rx till gem3_rx to return proper register from
zynqmp_clk_get_register. Otherwise firmware won't be able to set clock
for these due to incorrect register address.
Maksim Kiselev [Wed, 19 Jul 2023 06:53:37 +0000 (09:53 +0300)]
net: axi_emac: Change return value to -EAGAIN if RX is not ready
If there is no incoming package than axiemac_recv will return -1 which
in turn leads to printing `eth_rx: recv() returned error -1` error
message in eth_rx function. But missing a package is not an fatal error,
so return -EAGAIN in that case would be more suitable.
arm64: zynqmp: remove snps, enable_guctl1_resume_quirk quirk for usb
To sync with the upstream code, removed 'snps,enable_guctl1_resume_quirk'
quirk for usb. This quirk is no more available in linux after the xilinx
release 2022.2.
This functionality is taken care of by the 'snps,resume-hs-terminations'
quirk.
Explicitly specify interrupt affinity to avoid HW perfevents
need to guess. This avoids the following error upon linux boot:
armv8-pmu pmu: hw perfevents: no interrupt-affinity property,
guessing.
projects / u-boot.git / log