Ye Li [Tue, 31 Jan 2023 06:41:58 +0000 (14:41 +0800)]
env: mmc: Fix offset issue for env save
Fix the issue in commit 46c9016 ("env: mcc: Drop unnecessary #ifdefs")
If CONFIG_SYS_REDUNDAND_ENVIRONMENT is not defined, the offset value
becomes undetermined, so write env to unexpected offset.
Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Pali Rohár [Sun, 29 Jan 2023 16:44:11 +0000 (17:44 +0100)]
tools: default_image: Accept images with padding
If image file is stored on flash partition then it contains padding, which
is not part of the image itself. Image data size is stored in the image
header. So use image size from the header instead of expecting that total
image file size is size of the header plus size of the image data. This
allows dumpimage to parse image files with padding (e.g. dumped from flash
partition).
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Pali Rohár [Sun, 29 Jan 2023 16:45:55 +0000 (17:45 +0100)]
tools: imagetool: Skip autodetection of gpimage type
gpimage type requires only that two first 32-bit words of data file are
non-zero. So basically every random data file can be guessed and verified
as gpimage. So completely skip gpimage type from image autodetection code
to prevent lot of false positive results. Data file with gpimage type can
be still verified and parsed by explicitly specifying -T gpimage.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 28 Jan 2023 22:00:25 +0000 (15:00 -0700)]
qemu: Add a bootmeth for qfw
This supports reading a kernel and ramdisk from qfw, then loading it with
either the booti or bootz commands.
For now this uses the existing booti and bootz commands, rather than
trying to call that functionality directly (e.g. do_bootm_states()). It
does not require the HUSH parser though, which helps a little with size.
Simon Glass [Sat, 28 Jan 2023 22:00:24 +0000 (15:00 -0700)]
qemu: Add a bootdev for qfw
Add a bootdev device for qfw so that it can be used with standard boot.
This simply checks for the correct method and then does the read. Most of
the other logic is handed in a new bootmeth driver.
Simon Glass [Sat, 28 Jan 2023 22:00:22 +0000 (15:00 -0700)]
qemu: Update qfw command to use addresses
This uses casts all over the place. Use the correct type so that these
can be avoided, as is done with other commands. Also simplify a few
conditionals.
Simon Glass [Sat, 28 Jan 2023 22:00:21 +0000 (15:00 -0700)]
bootstd: Add some default filesystems and commands
We need to support a basic set of filesystems for booting to work in most
cases. Add these in via a new option, letting the board disable them
individually (for space reasons) if desired.
This enables the filesystem commands as well as the actual functionality,
even though bootstd is quite happy to use ext4 without the ext4 command.
Further work would be needed to disintangle this and reduce code size.
Add several other options as well, providing sensible defaults.
We cannot enable this by default, since it expands the size of many
boards quite a lot.
Simon Glass [Sat, 28 Jan 2023 22:00:20 +0000 (15:00 -0700)]
bootstd: Correct virtio block-device handling
At present virtio tries to attach QEMU services to a bootdev device, which
cannot work. Add a check for this.
Also use bootdev_setup_sibling_blk() to create the bootdev device, since
it allows the correct name to be used and bootdev_get_sibling_blk() to
work as expected.
The bootdev is not created on sandbox since it does have a real virtio
device and it is not possible to read blocks.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: a60f7a3e35b ("bootstd: Add a virtio bootdev") Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass [Sat, 28 Jan 2023 22:00:19 +0000 (15:00 -0700)]
bootstd: Probe the block device before use
In some cases the block device is obtained but is not probed, since it
is a sibling of the bootdev. Make sure it is probed, so it can be used
without any trouble.
This fixes a bug with virtio, where the device is accessed before it has
been set up by the virtio uclass.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 201417d700a ("bootstd: Add the bootdev uclass") Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass [Sat, 28 Jan 2023 22:00:18 +0000 (15:00 -0700)]
bootstd: Allow enabling BOOTSTD_FULL without needing EXPO
It is sometimes useful to have one without the other, e.g. on a device
without a display, since at present the expo feature requires CONFIG_VIDEO
to be enabled.
Update the Makefile and bootflow command to support this, as well as the
EXPO dependency.
am335x_evm_defconfig is used for BeagleBone Black, popular single board
computer with wide extension support. Enable CONFIG_CMD_EXTENSION by default
since extension detection is already implemented for am335x.
Also run make savedefconfig for am335x_evm_defconfig
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Tom Rini [Wed, 25 Jan 2023 23:09:55 +0000 (18:09 -0500)]
ti: j721e_evm: Add USB to the default boot order
This family of platforms typically has a USB port, and so attempting to
boot from it, and making it first, will provide a better overall user
experience.
Heiko Schocher [Tue, 24 Jan 2023 17:06:50 +0000 (18:06 +0100)]
powerpc/mpc85xx: socrates: rework build process
U-Boot build process for socrates board produces final U-Boot binary in
file u-boot-socrates.bin (by binman) And as a bonus it produces two
unusable broken binaries u-boot-dtb.bin and u-boot.bin (by Makefile).
Clean this up, so final U-Boot binary is in u-boot-dtb.bin
Heiko Schocher [Tue, 24 Jan 2023 17:06:49 +0000 (18:06 +0100)]
powerpc/mpc85xx: fixes and updates for socrates board
current mainline does not work on socrates board. To
get it back up working, there are some updates needed
in socrates_defconfig.
Signed-off-by: Heiko Schocher <hs@denx.de> Fixes: 94633c36f9eb ("net: Make DM_ETH be selected by NETDEVICE") Fixes: 2f8a6db5d83b ("Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig")
Simon Glass [Tue, 24 Jan 2023 10:55:10 +0000 (03:55 -0700)]
spl: Drop unwanted return in spl_fit_upload_fpga()
This was added by mistake and renders the function useless. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 33c60a38bb9 ("trace: Use notrace for short") Reported-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier-oss@weidmueller.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Holger Brunck [Tue, 24 Jan 2023 08:42:41 +0000 (09:42 +0100)]
km/ppc832x: join config files
There are no differences for the different 832x targets we have in
the header defined with SYS_CONFIG_NAME. So we can join the five
headers to a single file.
Holger Brunck [Tue, 24 Jan 2023 08:42:40 +0000 (09:42 +0100)]
km/ppc: remove km-mpc8360.h and km-mpc832x.h
Next step to get rid of the header files in icnlude/configs. Move
most of the defines to km83xx.c directly. Some remaining defines
which should go to Kconfig are moved to km-mpc83xx.h for now.
Also remove some unused defines and move one define to powerpc.env
as we only need it there.
Set splash screen related env variables. Default splash source is
set to mmc where user is expected to keep bmp in compressed format
with name ti.gz on first partition of mmc.
Splash file will be uncompressed to DDR at address 0x82000000 and
splash position is set to middle of screen.
Nikhil M Jain [Tue, 24 Jan 2023 05:16:02 +0000 (10:46 +0530)]
include: configs: am62x_evm: Add .env file for Am62x
Use .env file for setting board related environment variables,
in place of am62x_evm.h file. Except for BOOTENV settings, as
config_distro_boot.env file doesn't exist.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Linus Walleij [Mon, 23 Jan 2023 22:07:21 +0000 (23:07 +0100)]
test: bootdev: Do not require USB to compile test
This test will block compilation of the entire test suite
on platforms without USB support. Make the extern
"usb_started" conditional on USB host or gadget and
define a dummy flag if neither is enabled.
Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Makefile: fix shell error for darwin major/minor version check
Fix shell error:
/bin/sh: line 0: [: too many arguments
for the darwin major/minor version check.
It seems for os_x_before for some reason DARWIN_MAJOR_VERSION and
DARWIN_MINOR_VERSION are empty. To fix this set DARWIN_MAJOR_VERSION
and DARWIN_MINOR_VERSION to be evaluated once so the value is retained.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Sjoerd Simons [Thu, 19 Jan 2023 08:38:18 +0000 (09:38 +0100)]
lmb: Set correct lmb flags for EFI memory map entries
When adding reserved memory areas from the EFI memory map set the NOMAP
flag when applicable. When this isn't done adding "no-map" flagged entries
from the fdt after receiving the same from the EFI memory map fails due
to non-matching flags.
Tom Rini [Wed, 25 Jan 2023 23:08:23 +0000 (18:08 -0500)]
lmb: Default to not-LMB_USE_MAX_REGIONS
The LMB code allows for picking a hard limit on the number of regions it
can know of, or to dynamically allocate these regions. The reason for
this choice is to allow for the compiler to perform a size optimization
in the common case. This optimization however, is very small, ranging
from 196 bytes to 15 bytes saved, or in some cases, being larger. Now
that we also have more regions covered by LMB (in order to protect
various parts of our self at run time), the default of 8 is also much
easier to hit and leads to non-obvious error messages (which imply that
an area is protected, not that we're out of areas to add to the list).
Tom Rini [Sat, 4 Feb 2023 19:53:00 +0000 (14:53 -0500)]
Merge tag 'video-20230204' of https://source.denx.de/u-boot/custodians/u-boot-video
- restore TI AM335x LCDC driver with DM support
- make simple panel independent of backlight
- add ofnode panel timing decode functions with test
- add TIDSS video driver and AM62x splash screen
- add TI logo
Nikhil M Jain [Tue, 31 Jan 2023 10:05:19 +0000 (15:35 +0530)]
board: ti: am62x: evm: Add splash screen support
Splash screen function needs splash source information
to load image and display it, splash_location provides
the necessary info, Set default_splash_location to MMC
at partition 1:1. Probe DSS for splash screen display.
Nikhil M Jain [Tue, 31 Jan 2023 10:05:17 +0000 (15:35 +0530)]
drivers: video: tidss: TIDSS video driver support for AM62x
Added tidss video driver support which enables display
on oldi panel using AM62x, it creates a simple pipeline
framebuffer==>vidl1==>ovr1==>vp1==>oldi_panel and
calculates clock rates for panel from panel node in
device tree.
To compile TIDSS when user sets CONFIG_VIDEO_TIDSS
add rule in Makefile. Include tidss folder location
in Kconfig.
TIDSS is ported from linux kernel version 5.10.145
Nikhil M Jain [Tue, 31 Jan 2023 10:05:16 +0000 (15:35 +0530)]
drivers: video: simple_panel: make simple panel independent of backlight
This patch updates the necessary Kconfigs to make simple panel
driver independent of backlight driver and compiling backlight
related code in simple-panel driver conditionally to when user
has set CONFIG_BACKLIGHT.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Nikhil M Jain [Tue, 31 Jan 2023 10:05:14 +0000 (15:35 +0530)]
drivers: core: ofnode: Add panel timing decode.
ofnode_decode_display_timing supports reading timing parameters from
subnode of display-timings node, for displays supporting multiple
resolution, in case if a display supports single resolution, it fails
reading directly from display-timings node, to support it
ofnode_decode_panel_timing is added.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Dario Binacchi [Sat, 28 Jan 2023 15:55:31 +0000 (16:55 +0100)]
video: ti: am335x: restore driver-model code
The commit 82f7b869f5d7a ("video: Drop CONFIG_AM335X_LCD") removed not
only the LCD legacy implementation but also the code with driver model
support. The patch restores the code with driver model support.
Fixes: 82f7b869f5d7a ("video: Drop CONFIG_AM335X_LCD") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Sergei Antonov [Wed, 18 Jan 2023 17:52:18 +0000 (20:52 +0300)]
net: ipv6: fix alignment errors on ARM
Commands "ping6" and "tftpboot ... -ipv6" did not work on ARM because
machine code expects 4-byte alignment and some structures from net6.h
are not aligned in memory.
Fix by adding __packed, since it is already used in this file.
Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Ehsan Mohandesi [Fri, 13 Jan 2023 17:27:41 +0000 (09:27 -0800)]
net: ipv6: Fixed IPv6 string to address conversion off-by-one error
One extra character was being checked in the IPv6 string which caused the
last character of the address to be neither '\0' nor ':'. This raises an
error condition and causes the function to always return an error. This
issue was resolved by this fix.
Ioana Ciornei [Thu, 5 Jan 2023 15:03:19 +0000 (17:03 +0200)]
drivers: net: fsl-mc: remove explicit cast
Remove all the explicit casts from the void* returned by calloc.
With this we also improve a bit the length of those lines and there is
no need to split the assignment.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Ioana Ciornei [Thu, 5 Jan 2023 15:03:17 +0000 (17:03 +0200)]
drivers: net: fsl-mc: do not prefix decimal values with 0x
The fsl-mc driver printed debug information which used the 0x prefix for
decimal values. This only confuses anyone looking through the log.
Because of this, just remove the prefix and use the "DPXY.<id>" notation
which is the standard one for the DPAA2 objects.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Sean Edmond [Thu, 5 Jan 2023 02:16:26 +0000 (18:16 -0800)]
net: tftp: Fix for DATA ACK for block count out of order
In rfc7440, if an ACK is not received by the server or if the
last data block in a window is dropped, the server will timeout and
retransmit the window. In this case, the block count received will be
less than the internal block count. In this case, the client
should not ACK. ACK should only be sent if the received block
count is greater than the expected block count.
Signed-off-by: Sean Edmond <seanedmond@linux.microsoft.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Tim Harvey [Wed, 30 Nov 2022 17:42:51 +0000 (09:42 -0800)]
board: gw_ventana: enable MV88E61XX DSA support
Add MV88E61XX DSA support:
- update dt to provide internal MDIO bus and port handles.
U-Boot requires a more restrictive subset of the dt bindings
required by Linux for the sake of simplifying code
- update defconfig to remove old driver and enable new one
- replace mv88e61xx_hw_reset weak override with board_phy_config support
for register configuration that is outside the scope of the DSA driver
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tim Harvey [Wed, 30 Nov 2022 17:42:50 +0000 (09:42 -0800)]
net: add MV88E6xxx DSA driver
Add a DSA driver for the MV88E6xxx compatible Ethernet switches.
Cc: Marek Behún <marek.behun@nic.cz> Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
Tim Harvey [Wed, 30 Nov 2022 17:42:49 +0000 (09:42 -0800)]
net: fec: add support for DM_MDIO
Add support for DM_MDIO by registering a UCLASS_MDIO driver and
attempting to use it. This is necessary if wanting to use a DSA
driver for example hanging off of the FEC MAC.
Care is taken to fallback to non DM_MDIO mii bus as several boards define
DM_MDIO without having the proper device-tree configuration necessary
such as an mdio subnode, a phy-mode prop, and either a valid phy-handle
prop or fixed-phy subnode which will cause dm_eth_phy_connect() to fail.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
Tim Harvey [Wed, 30 Nov 2022 17:42:47 +0000 (09:42 -0800)]
net: dsa: allow rcv() and xmit() to be optional
Allow rcv() and xmit() dsa driver ops to be optional in case a driver
does not care to mangle a packet as in U-Boot only one network port is
enabled at a time and thus no packet mangling is necessary.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Enable TIMER and TEGRA_TIMER for TEGRA_ARMV7_COMMON and TEGRA210.
Additionally enable SPL_TIMER if build as SPL part and drop
deprecated configs from common header.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom <twarren@nvidia.com>
drivers: timer: add driver for ARMv7 based Tegra devices and T210
Add timer support for T20/T30/T114/T124 and T210 based devices.
Driver is based on DM, has device tree support and can be
used on SPL and early boot stage.
Arm64 Tegra (apart T210) according to comment in tegra-common.h use
architected timer.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF600T T30 Tested-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> # Surface RT T30 Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Agneli <poczt@protonmail.ch> # Toshiba AC100 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Co-developed-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom <twarren@nvidia.com>
ARM: tegra: remap clock_osc_freq for all Tegra family
Enum clock_osc_freq was designed to use only with T20.
This patch remaps it to use additional frequencies, added in
T30+ SoC while maintaining backwards compatibility with T20.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF600T T30 Tested-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> # Surface RT T30 Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Agneli <poczt@protonmail.ch> # Toshiba AC100 T20 Tested-by: Thierry Reding <treding@nvidia.com> # T30, T124, T210 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom <twarren@nvidia.com>
Marek Vasut [Thu, 26 Jan 2023 20:10:48 +0000 (21:10 +0100)]
net: ravb: Drop SoC-specific compatible support
The current set of U-Boot upstream R-Car Gen3 DTs all contain generic
"renesas,etheravb-rcar-gen3" compatible strings, drop the SoC specific
compatible string support from U-Boot to reduce size and duplication.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Hai Pham [Mon, 23 Jan 2023 00:24:09 +0000 (01:24 +0100)]
configs: draak: Enable I2C support for R-Car D3
Enable I2C support on D3 Draak.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Hai Pham [Thu, 26 Jan 2023 20:06:07 +0000 (21:06 +0100)]
clk: renesas: rcar-gen3: Factor out CPG library
R-Car V3U has a CPG different enough to not be a generic Gen3 CPG but
similar enough to reuse code. Introduce a new CPG library, factor out
the SD clock and RPC clock handling and hook them to the generic Gen3
CPG driver so we have an equal state.
Based on Linux commit [1] and [2] by Wolfram Sang
[1] 8bb67d87346a ("clk: renesas: rcar-gen3: Factor out CPG library")
[2] 6f21d145b90f ("clk: renesas: cpg-lib: Move RPC clock registration to
the library")
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek: - Add rcar_clk_* prefix to all functions
- Rebase on changes to
clk: renesas: Introduce and use rcar_clk_get_rate64_div_table function
- Use u32_encode_bits/GENMASK bitfield ops
Hai Pham [Thu, 26 Jan 2023 20:06:06 +0000 (21:06 +0100)]
clk: renesas: Add R8A77970 SD0H/SD0 clocks for SDHI
On R-Car V3M (AKA R8A77970), the SD0CKCR is laid out differently than on
the other R-Car gen3 SoCs. Hence, new clock types are introduced
respectively.
Based on Linux commit 381081ffc294 ("clk: renesas: r8a77970: Add SD0H/SD0
clocks for SDHI") by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek: - Fix missing ~ in GENMASK(a, b), use clrsetbits_le32 instead
- Do not modify r8a77970-cpg-mssr.c much, drop enum r8a77970_clk_types
which is now part of common clock types in rcar-gen3-cpg.h instead
Hai Pham [Sun, 29 Jan 2023 01:50:22 +0000 (02:50 +0100)]
clk: renesas: Switch to new SD clock handling
The old SD handling code was huge and could not handle all the details
which showed up on R-Car Gen3 SoCs meanwhile. It is time to switch to
another design. Have SDnH a separate clock, use the existing divider
clocks and move the errata handling from the clock driver to the SDHI
driver where it belongs.
Based on Linux series by Wolfram Sang, commit bb6d3fa98a41 ("clk:
renesas: rcar-gen3: Switch to new SD clock handling") and commit e5f7e81ee430a ("mmc: renesas_sdhi: Parse DT for SDnH")
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek: - Add rcar_clk_* prefix to all functions
- Fix missing ~ in GENMASK(a, b), use clrsetbits_le32 instead
- Use DIV_ROUND_CLOSEST, else if parent clock = 199999992 and
rate = 200000000, the divider would be 0 and table lookup
would fail.
- Turn rcar_clk_get_table_val into signed integer, so it can
return 0 as a valid value and negative values as errors.
- Make the code operate on correct clock and add comment
which explains the reasoning behind it.
- Rebase on changes to
clk: renesas: Introduce and use rcar_clk_get_rate64_div_table function
Hai Pham [Thu, 26 Jan 2023 20:06:04 +0000 (21:06 +0100)]
clk: renesas: Handle E3/D3 RPCSRC clock
The RPCSRC clock divider on R-Car D3 is very similar to the one on R-Car
E3, but uses a different pre-divider for the PLL0 parent. Add a new
macro to describe it, reusing the existing clock type for R-Car E3.
As both E3/D3 RPCSRC clock divider are different from the rest of R-Car
Gen3, keep the original implementation from Linux.
Based on Linux commit 40745482eec8 ("clk: renesas: r8a774c0: Add RPC
clocks") by Lad Prabhakar and 9d18f81b3535 ("clk: renesas: r8a77995: Add
RPC clocks") by Geert Uytterhoeven.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Add D3 tweaks
Hai Pham [Thu, 26 Jan 2023 20:06:03 +0000 (21:06 +0100)]
clk: renesas: Introduce and use rcar_clk_get_rate64_div_table function
Introduce new helper function to handle clock type that uses
clk_div_table struct. Based vaguely on Linux code. Make use
of clk_div_table in RPC clocks handling.
The E3/D3 RPCSRC need to be handled differently and will be addressed in
subsequence patch.
Based on Linux commit db4a0073cc82 ("clk: renesas: rcar-gen3: Add RPC
clocks") by Sergei Shtylyov.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek: - Squash patches to avoid adding unused code:
clk: renesas: Make use of clk_div_table in RPC clocks handling
clk: renesas: Introduce rcar_clk_get_rate64_div_table function
- Move the new code to the beginning of clk-rcar-gen3 to avoid
tables mixed with code
- Use rcar_ prefix for get_table_div function
- Get rid of custom macros, use GENMASK. Use custom field_get
implementation as the generic FIELD_GET does not support
constant mask and u32_get_bits requires higher optimization level
- Pass in the register bit mask instead of width/shift combination
- Turn rcar_clk_get_rate64_div_table into s64, as it can return -EINVAL
Hai Pham [Thu, 26 Jan 2023 20:05:55 +0000 (21:05 +0100)]
mmc: renesas-sdhi: R-Car M3 r1.3 also uses 4 tuning taps
Early ES revisions of M3-W SoCs requires 4-tap HS400. Reflect the status
from datasheet.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
projects / u-boot.git / log