All ARCH_MESON boards have a hardware random number generator. So we should
enable building the RNG driver.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tom Rini [Tue, 14 Apr 2020 12:47:07 +0000 (08:47 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-marvell
- Misc enhancements to Clearfog, including board variant detection
(Joel)
- Misc enhancements to Turris Mox, including generalization of the
ARMADA37xx DDR size detection (Marek)
Marek Behún [Wed, 8 Apr 2020 17:25:21 +0000 (19:25 +0200)]
arm64: mvebu: a37xx: add device-tree fixer for PCIe regions
In case when ARM Trusted Firmware changes the default address of PCIe
regions (which can be done for devices with 4 GB RAM to maximize the
amount of RAM the device can use) we add code that looks at how ATF
changed the PCIe windows in the CPU Address Decoder and changes given
device-tree blob accordingly.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
Marek Behún [Wed, 8 Apr 2020 17:25:20 +0000 (19:25 +0200)]
arm: mvebu: turris_mox: support devices with RAM > 1 GB
In order to support MOX boards with 2 GB or 4 GB RAM, we use the new
Armada-3700 generic code for memory information structures. This is done
by removing dram_init and dram_init_banksize from turris_mox.c, in order
for the generic, weak definitions to be used.
Also for boards with 4 GB RAM it is needed to increase
CONFIG_NR_DRAM_BANKS to 2 in turris_mox_defconfig.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
Marek Behún [Wed, 8 Apr 2020 17:25:19 +0000 (19:25 +0200)]
arm64: mvebu: a37xx: improve code determining memory info structures
Currently on Armada-37xx the mem_map structure is statically defined to
map first 2 GB of memory as RAM region, and system registers and PCIe
region device region.
This is insufficient for when there is more RAM or when for example the
PCIe windows is mapped to another address by the CPU Address Decoder.
In the case when the board has 4 GB RAM, on some boards the ARM Trusted
Firmware can move the PCIe window to another address, in order to
maximize possible usable RAM.
Also the dram_init and dram_init_banksize looks for information in
device-tree, and therefore different device trees are needed for boards
with different RAM sizes.
Therefore we add code that looks at how the ARM Trusted Firmware has
configured the CPU Address Decoder windows, and then we update the
mem_map structure and compute gd->ram_size and gd->bd->bi_dram bank
base addresses and sizes accordingly.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
Marek Behún [Wed, 8 Apr 2020 10:02:06 +0000 (12:02 +0200)]
arm: mvebu: dts: turris_mox: fix USB3 regulator
Commit e8e9715df2d4 requires the USB3 regulator node to have the
enable-active-high property for the regulator to work properly. The
GPIO_ACTIVE_HIGH constant is not enough anymore.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Fixes: e8e9715df2d4 ("regulator: fixed: Modify enable-active-high...") Reviewed-by: Stefan Roese <sr@denx.de>
Marek Behún [Wed, 8 Apr 2020 10:02:05 +0000 (12:02 +0200)]
arm: mvebu: turris_mox: Setup Linux's device tree before boot
Patch Linux's device tree according to which Mox modules are connected.
Linux's device tree has all possible Mox module nodes preprogrammed, but
in disabled state.
If MOX B, MOX F or MOX G module is present, this code enables the PCI
node.
For the network modules (MOX C, MOX D and MOX E) are present, the code
enables corresponding ethernet and swtich nodes and DSA connections.
For the SFP cage the SFP GPIO controller node and SFP node are also
enabled.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
Marek Behún [Wed, 8 Apr 2020 10:02:03 +0000 (12:02 +0200)]
arm: mvebu: turris_mox: Fix early SPI communication
The SPI clock signal changes value when the SPI configuration register
is configured. This can sometimes lead to the device misinterpreting
the enablement of the SPI controller as actual clock tick.
This can be solved by first setting the SPI CS1 pin from GPIO to SPI mode,
and only after that writing the SPI configuration register.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
Joel Johnson [Mon, 23 Mar 2020 20:21:31 +0000 (14:21 -0600)]
arm: mvebu: clearfog: use Pro name by default
Make the board version printed indicate the Pro variant default.
Also adjust static name casing to match what is expected for
EEPROM product name to share string constants.
Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
Joel Johnson [Mon, 23 Mar 2020 20:21:30 +0000 (14:21 -0600)]
arm: mvebu: solidrun: remove hardcoded DTS MAC address
Using a consistent hardcoded MAC address from the DTS file causes
issues when using multiple devices on the same network segment.
Instead rely on environment configuration or random generation.
Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
Joel Johnson [Mon, 23 Mar 2020 17:26:31 +0000 (11:26 -0600)]
arm: mvebu: clearfog: add SCSI to distro bootcmd
Include attempting to boot from SCSI (SATA) devices within generated
board distro bootcmd environment. The reasoning for boot ordering is
that MMC and USB are external and removable, while when a case is in
use, replacing M.2 or mSATA drives requires disassembly. Therefore,
to boot SCSI, [bootable] external media must be removed. If SCSI were
placed before MMC or USB, then removing a bootable SCSI drive to
enable MMC or USB booting would be more difficult.
Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
Chris Packham [Wed, 26 Feb 2020 06:53:50 +0000 (19:53 +1300)]
arm: mvebu: update RTC values for PCIe memory wrappers
Update the RTC (Read Timing Control) values for PCIe memory wrappers
following an ERRATA (ERRATA# TDB). This means the PCIe accesses will
used slower memory Read Timing, to allow more efficient energy
consumption, in order to lower the minimum VDD of the memory. Will lead
to more robust memory when voltage drop occurs (VDDSEG)
The code is based on changes from Marvell's U-Boot, specifically:
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
Josua Mayer [Mon, 17 Feb 2020 18:37:28 +0000 (19:37 +0100)]
arm: mvebu: clearfog: add scsi target to distro-boot
Support for sata devices via the scsi command is available and already
enabled by default for the Clearfog Base and Pro. This change adds scsi
to the list of boot targets used by distro-boot.
Signed-off-by: Josua Mayer <josua@solid-run.com> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
Chris Packham [Wed, 29 Jan 2020 23:50:44 +0000 (12:50 +1300)]
ddr: marvell: a38x: Allow boards to specify CK_DELAY parameter
For some layouts it is necessary to adjust the CK_DELAY parameter to
successfully complete DDR training. Add the ability to specify the
CK_DELAY in the mv_ddr_topology_map.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Tom Rini [Mon, 13 Apr 2020 15:27:00 +0000 (11:27 -0400)]
Merge branch 'next'
Pull in changes that have been pending in our 'next' branch. This
includes:
- A large number of CI improvements including moving to gcc-9.2 for all
platforms.
- amlogic, xilinx, stm32, TI SoC updates
- USB and i2c subsystem updtaes
- Re-sync Kbuild/etc logic with v4.19 of the Linux kernel.
- RSA key handling improvements
Update these 3 files from Linux:.
- socfpga_arria10.dtsi (Commit ID c1459a9d7e92)
- socfpga_arria10_socdk.dtsi (Commit ID d9b9f805ee2b)
- socfpga_arria10_socdk_sdmmc.dts (Commit ID 17808d445b6f)
Change in socfpga_arria10.dtsi:
- Add clkmgr label, so that can reference to it in u-boot.dtsi.
Change in socfpga_arria10-u-boot.dtsi:
- Add compatible and altr,sysmgr-syscon for uboot.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Marek Vasut [Fri, 6 Mar 2020 20:52:21 +0000 (21:52 +0100)]
ARM: socfpga: Enable DM RTC bootcount on ABB SECU1
Add and enable RTC-backed boot counter on ABB SECU1 platform.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
Kever Yang [Wed, 4 Mar 2020 00:59:50 +0000 (08:59 +0800)]
usb: Migrate to support live DT for some driver
Use ofnode_ instead of fdt_ APIs so that the drivers can support live DT.
This patch updates usb_get_dr_mode() and usb_get_maximum_speed() to use
ofnode as parameter instead of fdt offset. And all the drivers who use
these APIs update to use live dt APIs at the same time.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Simon Glass [Wed, 18 Mar 2020 15:43:01 +0000 (09:43 -0600)]
test/py: Allow using buildman to build U-Boot
It is a pain to have to set the CROSS_COMPILE environment variable when
using test.py's --build option. It is possible to get this using the -A
option from buildman. But it seems better to just use buildman to do the
build when it is available.
However using buildman adds a new dependency to the test system which we
want to avoid. So leave the default as is and add a flag to make it use
buildman.
Note that most of these changes relate to test.py and the parts of the
travis/gitlab/azure scripts which relate to running test and building a
suitable U-Boot to run the tests on.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Wed, 18 Mar 2020 15:43:00 +0000 (09:43 -0600)]
travis/gitlab/azure: Drop repeated buildman call with test.py
It does not seem to be necessary to run buildman again to show errors,
since any errors can be shown by the first invocation and there is only
a single board being built. Update this to simplify the code, using the
-e flag to make sure errors are shown.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Wed, 18 Mar 2020 15:42:57 +0000 (09:42 -0600)]
travis/gitlab/azure: Use -W to avoid warnings check
We can use the -W flag to tell buildman to ignore warnings. Since we also
have -E defined, compiler warnings are promoted to errors, so they will
still cause a failure. But migration warnings of the form:
===================== WARNING ======================
This board does not use CONFIG_DM. CONFIG_DM will be
compulsory starting with the v2020.01 release.
Failure to update may result in board removal.
See doc/driver-model/migration.rst for more info.
will now be ignored.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 329f5ef51d2 (travis.yml: run buildman with option -E) Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Wed, 18 Mar 2020 15:42:51 +0000 (09:42 -0600)]
travis/gitlab/azure: Use --board buildman flag with test.py
The current method of selecting the board to build with test.py is a bit
error-prone, e.g. with "^sandbox$" it actually builds 5 boards (all of
those in the sandbox architecture).
Use the (newish) --board flag instead, to get the same result.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Wed, 18 Mar 2020 15:42:49 +0000 (09:42 -0600)]
travis: Split the building into two parts
Buildman is used in two ways:
- to build a selection of boards (with no testing)
- to build a single board (and run pytest)
The gitlab and azure scrips do this in separate places, but travis does
not. To aid the refactoring process and keep the following patches in sync
across all three environments, split the code out in travis as well.
Use the buildman -w option for the single board. It is easier to
understand since it specifies the output directory directly. Also it
avoids needing to look at the internal .bm-work directory.
This initially creates some duplicate code, but by the end of the series
we have two completely different build paths with different arguments.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Wed, 18 Mar 2020 15:42:48 +0000 (09:42 -0600)]
travis: Don't copy files into .bm-work/
At present if TEST_PY_BD is empty the script copies various files into a
directory, to no purpose. This happens because UBOOT_TRAVIS_BUILD_DIR is
set before TEST_PY_BD is tested.
Move the 'if' to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Wed, 18 Mar 2020 15:42:46 +0000 (09:42 -0600)]
buildman: Allow building within a subdir of the current dir
This is useful in some situations, in particular with -w and when building
in-tree. Now that we are more careful about what we remove in
_PrepareOutputSpace(), it should be safe to relax this restriction.
Update the progress information also so it is clear what buildman is
doing. Remove files can take a long time.
Simon Glass [Wed, 18 Mar 2020 15:42:45 +0000 (09:42 -0600)]
buildman: Be more selective about which directories to remove
At present buildman removes any directory it doesn't intend to write
output into. This is overly expansive since if the output directory
happens to be somewhere with existing files, they may be removed. Using
an existing directory for buildman is not a good practice, but since the
result might be catastrophic, it is best to guard against it.
A previous commit[1] fixed this by refusing to write to a subdirectory
of the current directory, assumed to have U-Boot source code. But we can
do better by only removing directories that look like the ones buildman
creates.
Update the code to do this and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
[1] 409fc029c40 tools: buildman: Don't use the working dir as build dir
Simon Glass [Wed, 18 Mar 2020 15:42:44 +0000 (09:42 -0600)]
buildman: Allow ignoring warnings in the return code
Sometimes we don't want buildman to return failure if it seems warnings.
Add a -W option to support this. If buildman detects warnings (and no
errors) it will return an exit code of 0 (success).
Note that the definition of 'warnings' includes the migration warnings
produced by U-Boot, such as:
===================== WARNING ======================
This board does not use CONFIG_DM_MMC. Please update
...
====================================================
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Bin Meng [Mon, 6 Apr 2020 13:06:58 +0000 (06:06 -0700)]
video: sunxi: Change sunxi_get_mon_desc() to not return NULL for the default case
When building with gcc 9.2.0, the following build warning was seen:
drivers/video/sunxi/sunxi_display.c: In function 'video_hw_init':
drivers/video/sunxi/sunxi_display.c:1217:2:
error: '%s' directive argument is null [-Werror=format-overflow=]
Change sunxi_get_mon_desc() to not return NULL for the default case,
to fix the compiler warning.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Bin Meng [Sat, 28 Mar 2020 14:25:29 +0000 (07:25 -0700)]
azure/gitlab/travis: Add RISC-V SPL testing
This adds QEMU RISC-V 32/64 SPL testing. Unlike QEMU RISC-V 32/64,
we test SPL running in M-mode and U-Boot proper running in S-mode,
with a 4-core SMP configuration.
Bin Meng [Sat, 28 Mar 2020 14:25:25 +0000 (07:25 -0700)]
travis: Replace pre-built ARM/ARM64 GRUB images with the one built from source
As of today travis uses the pre-built GRUB ARM/ARM64 images from
opensuse. But azure/gitlab are using images built from GRUB 2.04
source. This updates travis to build GRUB ARM/ARM64 UEFI targets
from source, to keep in sync with azure/gitlab.
Tom Rini [Fri, 27 Mar 2020 15:46:27 +0000 (11:46 -0400)]
kconfig / kbuild: Re-sync with Linux 4.19
Align Kconfig and Kbuild logic to Linux 4.19 release with minimal impact
on files outside of this scope.
Our previous Kconfig sync was done by commit 5972ff077e0f ("kconfig /
kbuild: re-sync with Linux 4.18").
In this particular re-sync in order to keep clang support working a
number of related changes needed to be pulled in that had been missed
previously. Not all of these changes we easily traceable and so have
been omitted from the list below.
The imported Linux commits are:
[From prior to v4.18] 9f3f1fd29976 kbuild: Add __cc-option macro d7f14c66c273 kbuild: Enable Large File Support for hostprogs 6d79a7b424a5 kbuild: suppress warnings from 'getconf LFS_*' 24403874316a Shared library support 86a9df597cdd kbuild: fix linker feature test macros when cross compiling with Clang 0294e6f4a000 kbuild: simplify ld-option implementation
[From v4.18 to v4.19] 96f14fe738b6 kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS 10844aebf448 kbuild: Rename HOSTCXXFLAGS to KBUILD_HOSTCXXFLAGS b90a368000ab kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGS 8377bd2b9ee1 kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS f92d19e0ef9b kbuild: Use HOST*FLAGS options from the command line 4ab3b80159d4 kconfig: check for pkg-config on make {menu,n,g,x}config 693359f7ac90 kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE f60b992e30ff kbuild: replace $(LDFLAGS) $(ldflags-y) with $(ld_flags) 2fb9279f2c3e kbuild: change ld_flags to contain LDFLAGS_$(@F) c931d34ea085 arm64: build with baremetal linker target instead of Linux when available 5accd7f3360e kconfig: handle format string before calling conf_message_callback() a2ff4040151a kconfig: rename file_write_dep and move it to confdata.c 0608182ad542 kconfig: split out useful helpers in confdata.c adc18acf42a1 kconfig: remove unneeded directory generation from local*config 79123b1389cc kconfig: create directories needed for syncconfig by itself 16952b77d8b5 kconfig: make syncconfig update .config regardless of sym_change_count d6c6ab93e17f kbuild: remove deprecated host-progs variable 56869d45e364 kconfig: fix the rule of mainmenu_stmt symbol c151272d1687 kconfig: remove unused sym_get_env_prop() function 1880861226c1 kconfig: remove P_ENV property type e3fd9b5384f3 scripts/dtc: consolidate include path options in Makefile 4bf6a9af0e91 kconfig: add build-only configurator targets f1575595d156 kconfig: error out when seeing recursive dependency 5e8c5299d315 kconfig: report recursive dependency involving 'imply' f498926c47aa kconfig: improve the recursive dependency report 98a4afbfafd2 kconfig: fix "Can't open ..." in parallel build 9a9ddcf47831 kconfig: suppress "configuration written to .config" for syncconfig 87a32e624037 kbuild: pass LDFLAGS to recordmcount.pl d503ac531a52 kbuild: rename LDFLAGS to KBUILD_LDFLAGS 217c3e019675 disable stringop truncation warnings for now bc8d2e20a3eb kconfig: remove a spurious self-assignment fd65465b7016 kconfig: do not require pkg-config on make {menu,n}config 5a4630aadb9a ftrace: Build with CPPFLAGS to get -Qunused-arguments
Note that this adds new cleanup work to do in that we should adapt the
shared library support we have to what is now upstream.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Refactor the printing sequence in dm_dump_drivers to make it more clear.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Mon, 6 Apr 2020 12:29:44 +0000 (14:29 +0200)]
usb: Keep async schedule running only across mass storage xfers
Rather than keeping the asynchronous schedule running always, keep it
running only across USB mass storage transfers for now, as it seems
that keeping it running all the time interferes with certain control
transfers during device enumeration.
Note that running the async schedule all the time should not be an
issue, especially on EHCI HCD, as that one implements most of the
transfers using async schedule.
Note that we have usb_disable_asynch(), which however is utterly broken.
The usb_disable_asynch() blocks the USB core from doing async transfers
by setting a global flag. The async schedule should however be disabled
per USB controller. Moreover, setting a global flag does not prevent the
controller from using the async schedule, which e.g. the EHCI HCD does.
This patch implements additional callback to the controller, which
permits it to lock the async schedule and keep it running across
multiple transfers. Once the schedule is unlocked, it must also be
disabled. This thus prevents the async schedule from running outside
of the USB mass storage transfers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Tom Rini <trini@konsulko.com> Tested-by: Tom Rini <trini@konsulko.com> [omap3_beagle, previously failing]
Ye Li [Thu, 9 Apr 2020 08:44:43 +0000 (01:44 -0700)]
imx: Fix imx8m FIT script issue
The FIT config node has reversed ATF and u-boot: ATF is set to 'firmware' but
u-boot is set to 'loadables'.
This script can work previously because spl fit driver wrongly appends fdt to
all loadable images. With the issue fixed in commit 9d15d1d1c24f ("Revert
"common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled"") the
u-boot in 'loadables' does not have fdt appended and fails to work. So correct
the script by moving u-boot to 'firmware' and ATF to 'loadables'.
Signed-off-by: Ye Li <ye.li@nxp.com> Reported-by: Matt Porter <mporter@konsulko.com> Tested-by: Matt Porter <mporter@konsulko.com>
Stefan Roese [Thu, 13 Feb 2020 06:04:00 +0000 (07:04 +0100)]
mips: cmd: go: Flush cache before jumping to app/image
It has been noticed on MT7628/88 platforms, that booting the RAM image
does not work reliably. Sometimes it works and sometimes not. Debugging
showed that this "might" be a cache related issue as very strange
errors occurred (e.g. output corrupted etc).
This patch adds a cache flush for the complete SDRAM area to the go cmd
before jumping to the entry point for the MIPS architecture. The
complete area is flushed as we don't know at this point, how big the
area of the "application" really is.
Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Mauro Condarelli <mc5686@mclink.it> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Mauro Condarelli <mc5686@mclink.it> Cc: Weijie Gao <weijie.gao@mediatek.com>
Lars Povlsen [Thu, 6 Feb 2020 09:45:40 +0000 (10:45 +0100)]
mips: vcoreiii: Fix cache coherency issues
This patch fixes an stability issue seen on some vcoreiii targets,
which was root caused to a cache inconsistency situation.
The inconsistency was caused by having kuseg pointing to NOR area but
used as a stack/gd/heap area during initialization, while only
relatively late remapping the RAM area into kuseg position.
The fix is to initialize the DDR right after the TLB setup, and then
remapping it into position before gd/stack/heap usage.
Lars Povlsen [Thu, 6 Feb 2020 09:43:18 +0000 (10:43 +0100)]
mips: vcoreiii: Ajust CONFIG_SYS_MEMTEST_END
This patch ajust CONFIG_SYS_MEMTEST_END for vcoreiii-based systems to
avoid overwriting the relocated u-boot. The former setting was too
agressive with networking etc. enabled on some platforms.
Code sections should be syntax highlighted as bash.
Comment lines in code should start with a hash sign ('#') but code lines
should not.
Most commands can be executed as normal users. Prepend those commands
requiring elevated authorization with 'sudo'.
dd does not have a parameter cout.
sfdisk does not have a -C parameter on Debian Buster.
Provide the necessary input to sfdisk.
Creating a partition of length zero makes no sense.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Sean Anderson [Mon, 6 Apr 2020 14:23:09 +0000 (10:23 -0400)]
cmd: Add test and fix bugs for dm drivers
Add a test for the dm drivers command. Also fix a null pointer dereference
revealed by said test.
Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 8 Apr 2020 12:48:31 +0000 (08:48 -0400)]
Merge tag 'u-boot-amlogic-20200406' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic into next
- clk: meson-g12a: missing break
- sync all Amlogic DT from Linux v5.6-rc2
- MMC clock fixups
- add support for Libre Computer AML-S905D-PC and AML-S912-PC
Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver
ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3
Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR
Drivers:
- Gem:
- Flush memory after freeing
- Handle mdio bus separately
- Watchdog:
- Get rid of unused global data pointer
- Enable window watchdog timer
- Serial:
- Change reinitialization logic in zynq serial driver