]> git.dujemihanovic.xyz Git - u-boot.git/log
u-boot.git
3 years agoARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM
Jagan Teki [Tue, 16 Mar 2021 16:22:05 +0000 (21:52 +0530)]
ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

General features:
- STM32MP157AAC
- Up to 1GB DDR3L-800
- 512MB Nand flash
- I2S

MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier
boards for creating complete platform solutions.

Linux dts commit details:

commit <0be81dfaeaf8> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
SoM")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
3 years agoboard: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
Jagan Teki [Tue, 16 Mar 2021 16:22:04 +0000 (21:52 +0530)]
board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0

Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

i.Core STM32MP1 needs to mount on top of this Carrier board for
creating complete i.Core STM32MP1 C.TOUCH 2.0 board.

Linux dts commit details:

commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
C.TOUCH 2.0")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
3 years agoboard: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
Jagan Teki [Tue, 16 Mar 2021 16:22:03 +0000 (21:52 +0530)]
board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit

Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.

Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.

Linux dts commit details:

commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
EDIMM2.2 Starter Kit")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
3 years agoARM: stm32: Imply SPL_SPI_LOAD
Jagan Teki [Tue, 16 Mar 2021 16:22:02 +0000 (21:52 +0530)]
ARM: stm32: Imply SPL_SPI_LOAD

SPI Load isn't mandatory for STM32 builds.

Let's imply instead of select it to get rid of build
issues for non-SPI defconfigs.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
3 years agoARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3
Jagan Teki [Tue, 16 Mar 2021 16:22:01 +0000 (21:52 +0530)]
ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3

Engicam i.Core STM32MP1 SODIMM SoM has mounted 1x4Gb DDR3
which has 32bits width 528000Khz frequency.

Add DDR configuration via dtsi.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
3 years agoARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM
Jagan Teki [Tue, 16 Mar 2021 16:22:00 +0000 (21:52 +0530)]
ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

General features:
- STM32MP157A
- Up to 1GB DDR3L
- 4GB eMMC
- 10/100 Ethernet
- USB 2.0 Host/OTG
- I2S
- MIPI DSI to LVDS
- rest of STM32MP157A features

i.Core STM32MP1 needs to mount on top of Engicam baseboards
for creating complete platform solutions.

Linux commit details:

commit <30f9a9da4ee1> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
SoM")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
3 years agoboard: Add rt-thread art-pi board support
dillon min [Fri, 9 Apr 2021 07:28:46 +0000 (15:28 +0800)]
board: Add rt-thread art-pi board support

All these files are add for support rt-thread art-pi board
- add board/st/stm32h750-art-pi, defconfig, header support for u-boot

for more information about art-pi, please goto:
https://art-pi.gitee.io/website/

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
3 years agoram: stm32: fix strsep failed on read only memory
dillon min [Fri, 9 Apr 2021 07:28:45 +0000 (15:28 +0800)]
ram: stm32: fix strsep failed on read only memory

strsep will change data from original memory address,
in case the memory is in non-sdram/sram place, will
run into a bug(hang at SDRAM: )

just add a temporary array to store bank_name[] to fix this
bug.

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
3 years agoARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
dillon min [Fri, 9 Apr 2021 07:28:44 +0000 (15:28 +0800)]
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6

This patchset has following changes:

- introduce stm32h750.dtsi to support stm32h750 value line
- add pin groups for usart3/uart4/spi1/sdmmc2
- add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile)
- add stm32h750i-art-pi.dts to support art-pi board
- add stm32h750i-art-pi-u-boot.dtsi to support art-pi board (u-boot)

art-pi board component:
- 8MiB qspi flash
- 16MiB spi flash
- 32MiB sdram
- ap6212 wifi&bt&fm

the detail board information can be found at:
https://art-pi.gitee.io/website/

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
3 years agoARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register
dillon min [Fri, 9 Apr 2021 07:28:43 +0000 (15:28 +0800)]
ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register

Replace upper case by lower case in i2c nodes name.
update dmamux1 register range.

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
3 years agoARM: dts: stm32: add new instances for stm32h743 MCU
dillon min [Fri, 9 Apr 2021 07:28:42 +0000 (15:28 +0800)]
ARM: dts: stm32: add new instances for stm32h743 MCU

Some instances are missing in current support of stm32h743 MCU. This commit
adds usart3/uart4 and sdmmc2 support.

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
3 years agoARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
dillon min [Fri, 9 Apr 2021 07:28:41 +0000 (15:28 +0800)]
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750

This patch is intend to add support stm32h750 value line,
just add stm32h7-pinctrl.dtsi for extending, with following changes:

- rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi
- move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi
- update stm32h743i-{disco, eval}.dts to include stm32h7-pinctrl.dtsi

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
3 years agoARM: dts: stm32: split sdram pin & timing parameter into specific board dts
dillon min [Fri, 9 Apr 2021 07:28:40 +0000 (15:28 +0800)]
ARM: dts: stm32: split sdram pin & timing parameter into specific board dts

As different boards has their own sdram hw connection, mount different
sdram modules, so move sdram timing parameter and pin configuration
to their board device tree.

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
3 years agoPrepare v2021.04
Tom Rini [Mon, 5 Apr 2021 15:03:29 +0000 (11:03 -0400)]
Prepare v2021.04

Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agoimx8mn_ddr4_evk: Allow booting the kernel by default
Fabio Estevam [Thu, 4 Mar 2021 11:07:16 +0000 (08:07 -0300)]
imx8mn_ddr4_evk: Allow booting the kernel by default

Currently it is not possible to boot Linux from the SD card
by default.

Make the necessary adjustments to allow it.

Reported-by: Peter Bergin <peter@berginkonsult.se>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Andrey Zhizhikin <andrey.z@gmail.com> # imx8mn_ddr4_evk
Reviewed-by: Peng Fan <peng.fan@nxp.com>
3 years agosphinx: Pin to docutils-0.16
Tom Rini [Sun, 4 Apr 2021 20:04:56 +0000 (16:04 -0400)]
sphinx: Pin to docutils-0.16

In newer docutils writers/latex2e/docutils.sty has a unicode character
in the comments which can in turn cause Python 3.6 at least to fail.
Pin to the previous docutils release for now.

Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agocmd: CMD_USB depends on USB
Heinrich Schuchardt [Sun, 4 Apr 2021 13:35:07 +0000 (13:35 +0000)]
cmd: CMD_USB depends on USB

The usb command cannot be compiled with CONFIG_USB=n:

ld.bfd: cmd/usb.c:660: undefined reference to `usb_stop'
ld.bfd: cmd/usb.c:663: undefined reference to `usb_started'

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoMakefile: Silence the deprecation script
Simon Glass [Wed, 31 Mar 2021 22:18:13 +0000 (11:18 +1300)]
Makefile: Silence the deprecation script

This bash code is currently showing up in the build unless 'make -s' is
used. We don't normally show these sorts of things as they are confusing.
Also this code was not shown before the recent refactoring of how these
messages are displayed.

Add an '@' to silence it.

Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Bin Meng <bmeng.cn@gmail.com>
Fixes: 13732528516 ("Makefile: Add common code to report deprecation")
3 years agoMerge tag 'efi-2021-04-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi
Tom Rini [Wed, 31 Mar 2021 17:05:57 +0000 (13:05 -0400)]
Merge tag 'efi-2021-04-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2021-04-rc6

Bug fix:
    Fix ConvertDeviceNodeToText() for Uart()

3 years agotest: Don't unmount not (yet) mounted system
Andy Shevchenko [Thu, 11 Feb 2021 14:40:12 +0000 (16:40 +0200)]
test: Don't unmount not (yet) mounted system

When test suite tries to create a file for a new filesystem test case and fails,
the clean up of the exception tries to unmount the image, that has not yet been
mounted. When it happens, the fuse_mounted global variable is set to False and
inconveniently the test case tries to use sudo, so without this change the
admin of the machine gets an (annoying) email:

  Subject: *** SECURITY information for example.com ***

  example.com : Feb  5 19:43:47 : ... COMMAND=/bin/umount .../build-sandbox/persistent-data/mnt

and second run of the test cases on uncleaned build folder will ask for sudo
which is not what expected.

Besides that there is a double unmount calls during successfully run test case.

All of these due to over engineered Python try-except clause and people didn't
get it properly at all. The rule of thumb is that don't use more keywords than
try-except in the exception handling code. Nevertheless, here we adjust code
to be less intrusive to the initial logic behind that complex and unclear
constructions in the test case, although it adds a lot of lines of the code,
i.e. splits one exception handler to three, so on each step we know what
cleanup shall perform.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agoMerge https://source.denx.de/u-boot/custodians/u-boot-sunxi
Tom Rini [Wed, 31 Mar 2021 11:48:47 +0000 (07:48 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi

- H616 fixes to keep it in sync with upstream TF-A

3 years agosunxi: dts: H616: Drop reserved-memory node
Andre Przywara [Thu, 25 Mar 2021 16:19:52 +0000 (16:19 +0000)]
sunxi: dts: H616: Drop reserved-memory node

Trusted Firmware now adds the /reserved-memory subnode to the DT at
runtime[1], putting in the right values.

Drop our hard-coded version, as this might clash with the actual values
(which have also changed), and rely on TF-A to add the node.

[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7770

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
3 years agosunxi: H616: Change TF-A load address to beginning of DRAM
Andre Przywara [Thu, 25 Mar 2021 16:20:13 +0000 (16:20 +0000)]
sunxi: H616: Change TF-A load address to beginning of DRAM

Loading Trusted-Firmware's BL31 at 16KB into DRAM was originally a hack
to allow sharing more code with the other SoCs (which use this offset
in SRAM). However there is no longer a reason for that, as the
problematic macros have been properly separated there.

The latest (and hopefully final) TF-A code drop now changes the load
address to the beginning of DRAM, which is also more easily protected
by the Trustzone memory controller (code to be done).

Adjust the load address of BL31 now, to avoid any issues with
incompatible versions later on (the TF-A patches are about to be merged).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
3 years agoefi_loader: typo 'devide path'
Heinrich Schuchardt [Wed, 31 Mar 2021 06:34:33 +0000 (06:34 +0000)]
efi_loader: typo 'devide path'

Fix a typo in helloworld.efi.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoefi_loader: Uart device path missing break
Heinrich Schuchardt [Wed, 31 Mar 2021 06:16:04 +0000 (08:16 +0200)]
efi_loader: Uart device path missing break

In the devicepath node to text conversion for Uart nodes a break statement
is missing.

Indicated by Coverity Scan CID 330038
Fixes: 62df6e9c9994 ("efi_loader: Uart device path")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoPrepare v2021.04-rc5
Tom Rini [Mon, 29 Mar 2021 21:20:13 +0000 (17:20 -0400)]
Prepare v2021.04-rc5

Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agoMerge branch '2021-03-28-assorted-bugfixes'
Tom Rini [Mon, 29 Mar 2021 00:28:51 +0000 (20:28 -0400)]
Merge branch '2021-03-28-assorted-bugfixes'

3 years agoSupport building on macOS/arm64
Jessica Clarke [Sat, 20 Mar 2021 20:43:05 +0000 (20:43 +0000)]
Support building on macOS/arm64

On Arm-based Macs, -no_pie is ignored and gives a linker warning.
Moreover, the build falls over with:

  ld: Absolute addressing not allowed in arm64 code but used in '_image_type_ptr_aisimage' referencing '_image_type_aisimage'

for dumpimage and mkimage, since we put data structs in text sections
not data sections and so cannot have dynamic relocations. Instead, move
the sections to __DATA and drop disabling PIE.

Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
3 years agodm: test: Always include command.h for print_ut
Sean Anderson [Fri, 26 Mar 2021 02:02:28 +0000 (22:02 -0400)]
dm: test: Always include command.h for print_ut

We need this header for U_BOOT_CMD, which is always present even without
EFI.

Fixes: 82c468a049 ("dm: test: Update Makefile conditions")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agotest: Add udevice declaration to avoid build error
Simon Glass [Sat, 27 Mar 2021 17:53:08 +0000 (06:53 +1300)]
test: Add udevice declaration to avoid build error

When including this file on a board other than sandbox (e.g by enabling
UNIT_TEST and CMD_SETEXPR) an results. Fix it by declaring struct udevice
first.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoMerge branch '2021-03-27-master-imports'
Tom Rini [Sat, 27 Mar 2021 15:58:37 +0000 (11:58 -0400)]
Merge branch '2021-03-27-master-imports'

- Rework the deprecation warnings to be consistently phrased.
- Add in a warning for DM_I2C, for a year from next release.
- Fix Azure builds of Windows host tools.

3 years agoAzure: Use "pacman -Sy" to install the toolchain
Tom Rini [Fri, 26 Mar 2021 19:14:14 +0000 (15:14 -0400)]
Azure: Use "pacman -Sy" to install the toolchain

We now see an error such as:
warning: database file for 'ucrt64' does not exist (use '-Sy' to download)
error: failed to prepare transaction (could not find database)

So use -Sy as suggested.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
3 years agodm: i2c: Add a migration method for I2C
Simon Glass [Thu, 25 Mar 2021 08:24:44 +0000 (21:24 +1300)]
dm: i2c: Add a migration method for I2C

This probably should have been done a while back since it is a core
system. Add a migration deadline of later this year, to catch the
stragglers.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Drop the old SPI flash migration message
Simon Glass [Thu, 25 Mar 2021 08:24:43 +0000 (21:24 +1300)]
Makefile: Drop the old SPI flash migration message

This message does not seem to make sense. It may be out of date. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use common code for DM_ETH deprecation warning
Simon Glass [Thu, 25 Mar 2021 08:24:42 +0000 (21:24 +1300)]
Makefile: Use common code for DM_ETH deprecation warning

Update the CONFIG_DM_ETH check to use the 'deprecated' function.

Tested with snow

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use common code for WDT deprecation warning
Simon Glass [Thu, 25 Mar 2021 08:24:41 +0000 (21:24 +1300)]
Makefile: Use common code for WDT deprecation warning

Update the CONFIG_WDT check to use the 'deprecated' function.

Tested with kmcent2

Old message:

===================== WARNING ======================
This board does not use CONFIG_WDT (DM watchdog support).
Please update the board to use CONFIG_WDT before the
v2019.10 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_WDT (Driver Model
for DM watchdog). Please update the board to use
CONFIG_WDT before the v2019.10 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use common code for SPI_FLASH deprecation warning
Simon Glass [Thu, 25 Mar 2021 08:24:40 +0000 (21:24 +1300)]
Makefile: Use common code for SPI_FLASH deprecation warning

Update the CONFIG_DM_SPI_FLASH check to use the 'deprecated' function.

Tested with vinco

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH (Driver Model
for SPI flash). Please update the board to use
CONFIG_DM_SPI_FLASH before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use common code for DM_VIDEO deprecation warning
Simon Glass [Thu, 25 Mar 2021 08:24:39 +0000 (21:24 +1300)]
Makefile: Use common code for DM_VIDEO deprecation warning

Update the CONFIG_DM_VIDEO check to use the 'deprecated' function.

Tested with pxm2

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_VIDEO Please update
the board to use CONFIG_DM_VIDEO before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_VIDEO (Driver Model
for video). Please update the board to use
CONFIG_DM_VIDEO before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
==================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use common code for PCI deprecation warning
Simon Glass [Thu, 25 Mar 2021 08:24:38 +0000 (21:24 +1300)]
Makefile: Use common code for PCI deprecation warning

Update the CONFIG_DM_PCI check to use the 'deprecated' function.

Tested with MPC8349ITX

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_PCI Please update
the board to use CONFIG_DM_PCI before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_PCI (Driver Model
for PCI). Please update the board to use
CONFIG_DM_PCI before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use common code for LIBATA deprecation warning
Simon Glass [Thu, 25 Mar 2021 08:24:37 +0000 (21:24 +1300)]
Makefile: Use common code for LIBATA deprecation warning

Update the CONFIG_LIBATA check to use the 'deprecated' function.

Tested with MPC8349ITX

Old message:

===================== WARNING ======================
This board does use CONFIG_LIBATA but has CONFIG_AHCI not
enabled. Please update the storage controller driver to use
CONFIG_AHCI before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_AHCI (Driver Model
for AHCI). Please update the board to use
CONFIG_AHCI before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use common code for MVSATA_IDE deprecation warning
Simon Glass [Thu, 25 Mar 2021 08:24:36 +0000 (21:24 +1300)]
Makefile: Use common code for MVSATA_IDE deprecation warning

Update the CONFIG_MVSATA_IDE check to use the 'deprecated' function.

Tested with nas220

Old message:

===================== WARNING ======================
This board does use CONFIG_MVSATA_IDE which is not
ported to driver-model (DM) yet. Please update the storage
controller driver to use CONFIG_AHCI before the v2019.07
release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_AHCI (Driver Model
for AHCI instead of CONFIG_MVSATA_IDE). Please update the board to use
CONFIG_AHCI before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use common code for USB deprecation warning
Simon Glass [Thu, 25 Mar 2021 08:24:35 +0000 (21:24 +1300)]
Makefile: Use common code for USB deprecation warning

Update the USB check to use the 'deprecated' function.

Tested with xpress

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_USB. Please update
the board to use CONFIG_DM_USB before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_USB (Driver Model
for  USB). Please update the board to use
CONFIG_DM_USB before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use common code for MMC deprecation warning
Simon Glass [Thu, 25 Mar 2021 08:24:34 +0000 (21:24 +1300)]
Makefile: Use common code for MMC deprecation warning

Update the MMC check to use the 'deprecated' function.

Tested with zc5202

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_MMC. Please update
the board to use CONFIG_DM_MMC before the v2019.04 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_MMC (Driver Model
for MMC). Please update the board to use
CONFIG_DM_MMC before the v2019.04 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Add common code to report deprecation
Simon Glass [Thu, 25 Mar 2021 08:24:33 +0000 (21:24 +1300)]
Makefile: Add common code to report deprecation

Add a function which can be called to report a migration problem. This
will make it easier to add new migration checks, since the logic and
strings are not spread out over 8 lines of code.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Move non-DM migration messages to the top
Simon Glass [Thu, 25 Mar 2021 08:24:32 +0000 (21:24 +1300)]
Makefile: Move non-DM migration messages to the top

At present the driver model migration messages are mixed with the others.
Collect them together before starting to refactor them.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMerge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Tom Rini [Wed, 24 Mar 2021 12:11:30 +0000 (08:11 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

- Bug fixes related to FSL-IFC, watchdog
- layerscape-pcie, flexspi, T2080rdb.

3 years agomtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pages
Maxim Kochetkov [Fri, 12 Mar 2021 06:27:41 +0000 (09:27 +0300)]
mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pages

Linux commit a75bbe71a27 ("mtd: rawnand: fsl_ifc: fix FSL NAND driver to
 read all ONFI parameter pages")

Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page
read is not valid, the host should read redundant parameter page copies.
Fix FSL NAND driver to read the two redundant copies which are mandatory
in the specification.

Signed-off-by: Jane Wan <Jane.Wan@nokia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agopci: layerscape: Change to allocate zeroed memery for struct ls_pcie
Hou Zhiqiang [Thu, 11 Mar 2021 07:30:51 +0000 (15:30 +0800)]
pci: layerscape: Change to allocate zeroed memery for struct ls_pcie

As on some incipient Layerscape platforms (LS1043A series) there isn't
separate PF control register block, these registers reside in the LUT
register block, so when the driver detected there isn't 'ctrl', it will
assign the 'lut' address to the ls_pcie->ctrl.

The current code allocate memory for the struct ls_pcie with random
contents, this can result in skipping to assign the ls_pcie->ctrl with
the 'lut' address, then further crash with the incorrect address.

Fixes: 118e58e26eba ("pci: layerscape: Split the EP and RC driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agoconfigs: ls1028a: Correct CONFIG_ENV_SECT_SIZE
Kuldeep Singh [Wed, 3 Mar 2021 11:34:23 +0000 (17:04 +0530)]
configs: ls1028a: Correct CONFIG_ENV_SECT_SIZE

LS1028A-RDB/QDS has Micron "mt35xu02g" nor flash of size 256M with 128K
sector size. Correct CONFIG_ENV_SECT_SIZE value to 128K.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agoconfigs: ls1028aqds: Move CONFIG_SPI_FLASH_* definitions to defconfig
Kuldeep Singh [Wed, 3 Mar 2021 11:34:22 +0000 (17:04 +0530)]
configs: ls1028aqds: Move CONFIG_SPI_FLASH_* definitions to defconfig

LS1028A-QDS has CONFIG_SPI_FLASH_SST and CONFIG_SPI_FLASH_EON defines
present in header. Move these entries from header to defconfigs.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agoconfigs: ls1028a: Unset CONFIG_SPI_FLASH_SPANSION
Kuldeep Singh [Wed, 3 Mar 2021 11:34:21 +0000 (17:04 +0530)]
configs: ls1028a: Unset CONFIG_SPI_FLASH_SPANSION

There is no Spansion flash on LS1028A-RDB/QDS boards.
Unset CONFIG_SPI_FLASH_SPANSION option for both the boards.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agoconfigs: lx2160a: Remove unused Flexspi config options
Kuldeep Singh [Wed, 3 Mar 2021 11:34:20 +0000 (17:04 +0530)]
configs: lx2160a: Remove unused Flexspi config options

It is now safe to remove Flexspi configs NXP_FSPI_FLASH_SIZE and
NXP_FSPI_FLASH_NUM options from headers as they are no longer used by
driver anymore.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agoconfigs: lx2160a: Unset CONFIG_SPI_FLASH_SPANSION
Kuldeep Singh [Wed, 3 Mar 2021 11:34:19 +0000 (17:04 +0530)]
configs: lx2160a: Unset CONFIG_SPI_FLASH_SPANSION

There is no Spansion flash on LX2160A-RDB/QDS boards.
Unset CONFIG_SPI_FLASH_SPANSION option for both the boards.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agoboard: freescale: t208xrdb: Add link to User Guide
Chris Packham [Wed, 3 Mar 2021 01:09:46 +0000 (14:09 +1300)]
board: freescale: t208xrdb: Add link to User Guide

The User Guide contains handy things like block diagrams and DIP switch
settings and it's even available on the public web. Add a link to it in
the README.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agopowerpc: t2080rdb: Enable RTC support
Chris Packham [Wed, 3 Mar 2021 01:09:45 +0000 (14:09 +1300)]
powerpc: t2080rdb: Enable RTC support

The T2080RDB has a ds1339 on i2c0. Add this to the devicetree and enable
the relevant support in the configs.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agortc: ds1307: Add ds1339 compatible
Chris Packham [Wed, 3 Mar 2021 01:09:44 +0000 (14:09 +1300)]
rtc: ds1307: Add ds1339 compatible

As far as u-boot is concerned the ds1339 is compatible with the other
devices supported by the ds1307 driver. The Linux driver does expose
some additional functionality but as far as u-boot is concerned just
adding the compatible string is enough.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agoMerge branch 'v2021.04-rc5' of https://github.com/lftan/u-boot
Tom Rini [Tue, 23 Mar 2021 12:11:30 +0000 (08:11 -0400)]
Merge branch 'v2021.04-rc5' of https://github.com/lftan/u-boot

3 years agofsl_ifc: fix typo in the NOR CSOR register definition
Aleksandar Gerasimovski [Mon, 22 Feb 2021 18:15:58 +0000 (18:15 +0000)]
fsl_ifc: fix typo in the NOR CSOR register definition

The name of the define must indicate 'Asynchronous', so 'ASYNC' is more
appropriate. AYSNC is probably a typo, and checkpatch script is throwing
a warning if this is set in the board include files.

It is save to change this now as none of the existing designs is using it
so far, but we will use it in our design it help to make IFC settings
more transparent.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
3 years agoarm: socfpga: Only do 'is OS booted from FIT' checking when VAB is enabled
Siew Chin Lim [Mon, 22 Mar 2021 10:04:52 +0000 (18:04 +0800)]
arm: socfpga: Only do 'is OS booted from FIT' checking when VAB is enabled

Check CONFIG_SOCFPGA_SECURE_VAB_AUTH before perform 'is OS booted from FIT'
checking in board_prep_linux function. And, fix typo of
CONFIG_SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE.

CONFIG_FIT will be enabled in both ATF and VAB boot flow, thus,
board_prep_linux function will always be called by both ATF and
VAB boot flow.

board_pre_linux function will do 'is OS booted from FIT' checking,
and it will be called before board_fit_image_post_process function.

VAB boot flow expects the OS is always booted from FIT and with VAB
signed cerfiticate because the VAB authentication is implemented in
board_fit_image_post_process function. So, VAB needs the 'is OS booted
from FIT' checking in board_pre_linux function.

However, for ATF boot flow, it is not a requirement that the OS must
always booted from FIT. The OS can be booted from individual Image and
kernel dtb file. Thus, we should not do 'if OS is booted from FIT'
checking in board_prep_linux function.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
3 years agoMerge tag 'efi-2021-04-rc5-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Tom Rini [Sat, 20 Mar 2021 12:55:18 +0000 (08:55 -0400)]
Merge tag 'efi-2021-04-rc5-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request efi-2021-04-rc5-2

Bug fixes:

* re-enable loading UEFI binaries via UART
* fix a NULL dereference in EFI console

3 years agocmd/load: support uploading EFI binary via UART
Heinrich Schuchardt [Fri, 19 Mar 2021 02:50:57 +0000 (02:50 +0000)]
cmd/load: support uploading EFI binary via UART

When uploading an EFI binary via the UART we have to call
efi_set_bootdev() or we won't be able to execute it.

Put the includes into alphabetic order.

Fixes: 5f59518a7b1a ("efi_loader: setting boot device")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoefi_loader: Uart device path
Heinrich Schuchardt [Fri, 19 Mar 2021 01:49:54 +0000 (02:49 +0100)]
efi_loader: Uart device path

When uploading an EFI binary via the UART we need to assign a device path.

* Provide devicepath node to text conversion for Uart() node.
* Provide function to create Uart() device path.
* Add UART support to efi_dp_from_name().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoefi_loader: NULL dereference in EFI console
Heinrich Schuchardt [Tue, 16 Mar 2021 11:56:57 +0000 (12:56 +0100)]
efi_loader: NULL dereference in EFI console

Even if CONFIG_DM_VIDEO=y and stdout="vidconsole", a video device may not
be available. Check the return values of the relevant functions.

If no video output device is available, assume that the serial console is
in use.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoMerge branch '2021-03-19-assorted-fixes'
Tom Rini [Fri, 19 Mar 2021 19:23:10 +0000 (15:23 -0400)]
Merge branch '2021-03-19-assorted-fixes'

- NVMe cache fixes, API bugfix with !CONFIG_SYS_64BIT_LBA, ahci mediatek
  fix when debugging, ti-sysc uclass fix, sl28 MMC boot fix

3 years agonvme: Elaborate on cache maintenance operation in get/set_features
Andre Przywara [Tue, 2 Mar 2021 15:43:43 +0000 (15:43 +0000)]
nvme: Elaborate on cache maintenance operation in get/set_features

At the moment the nvme_get_features() and nvme_set_features() functions
carry a (somewhat misleading) comment about missing cache maintenance.

As it turns out, nvme_get_features() has no caller at all in the tree,
and nvme_set_features' only user doesn't use a DMA buffer.

Mention that in the comment, and leave some breadcrumbs for the future,
should those functions attract more users.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
3 years agonvme: Always invalidate whole cqes[] array
Andre Przywara [Mon, 8 Feb 2021 13:31:54 +0000 (13:31 +0000)]
nvme: Always invalidate whole cqes[] array

At the moment nvme_read_completion_status() tries to invalidate a single
member of the cqes[] array, which is shady as just a single entry is
not cache line aligned.
The structure is dictated by hardware, and with 16 bytes is smaller than
any cache line we usually deal with. Also multiple entries need to be
consecutive in memory, so we can't pad them to cover a whole cache line.

As a consequence we can only always invalidate all of them - U-Boot just
uses two of them anyway. This is fine, as they are only ever read by the
CPU (apart from the initial zeroing), so they can't become dirty.

Make this obvious by always invalidating the whole array, regardless of
the entry number we are about to read.
Also blow up the allocation size to cover whole cache lines, to avoid
other heap allocations to sneak in.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
3 years agoapi: fix a potential serious bug caused by undef CONFIG_SYS_64BIT_LBA
Marek Behún [Sat, 6 Mar 2021 22:43:22 +0000 (23:43 +0100)]
api: fix a potential serious bug caused by undef CONFIG_SYS_64BIT_LBA

The api_public.h header file undefined macro CONFIG_SYS_64BIT_LBA.

But api/api_storage.c includes this header before including part.h,
causing the type of lbaint_t and subsequently the type signature of
blk_dread() and blk_dwrite() functions to change from the rest of U-Boot
(if CONFIG_SYS_64BIT_LBA is defined for the board).

This is of course wrong, because the call to blk_dread() / blk_dwrite()
will receive mangled arguments.

Fix this by removing the undef of macro CONFIG_SYS_64BIT_LBA and instead
make the immediate code do what it would do as if the macro was not
defined.

Add a FIXME to whoever is maintaining this code.

CI managed to trigger this bug when compiling for lsxhl_defconfig, which
has CONFIG_API selected. The compiler complained about blk_dwrite() and
blk_dread() not matching original declarations:

  include/blk.h:280:15: warning: type of ‘blk_dwrite’ does not match
                                 original declaration
 [-Wlto-type-mismatch]
  280 | unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t st
      |               ^
  drivers/block/blk-uclass.c:456:15: note: type mismatch in parameter 2
  456 | unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t st
      |               ^

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agobus: ti-sysc: change in a normal driver
Dario Binacchi [Tue, 16 Mar 2021 20:51:44 +0000 (21:51 +0100)]
bus: ti-sysc: change in a normal driver

The module defines a duplicate uclass driver for UCLASS_SIMPLE_BUS, but
it is not allowed. This breaks of-platdata and makes the result
non-deterministic.

The driver does not need to be an uclass driver, so lets remove it. I
had turned it into an uclass driver because I thought wrongly it had to
call the dm_scan_fdt_dev routine to work properly, but some tests on the
board have shown otherwise.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agoboard: sl28: disable HS400 mode
Michael Walle [Wed, 17 Mar 2021 14:01:35 +0000 (15:01 +0100)]
board: sl28: disable HS400 mode

Since commit 8ee802f899ef ("mmc: fsl_esdhc: make sure delay chain locked
for HS400") HS400 mode is unreliable on LS1028A SoCs. Some workarounds are
missing for this SoC.

Disable HS400 mode for now.

Signed-off-by: Michael Walle <michael@walle.cc>
3 years agoahci: mediatek: fix undefined reference of dev_err
Frank Wunderlich [Tue, 16 Mar 2021 18:05:33 +0000 (19:05 +0100)]
ahci: mediatek: fix undefined reference of dev_err

building with MTK_AHCI enabled results in implicit declaration and
undefined reference of dev_err followed by a segfault of gcc

drivers/ata/mtk_ahci.c: In function 'mtk_ahci_parse_property':
drivers/ata/mtk_ahci.c:65:4: warning:
implicit declaration of function 'dev_err'
drivers/ata/mtk_ahci.c:65: undefined reference to `dev_err'
in function `mtk_ahci_probe':
drivers/ata/mtk_ahci.c:92: undefined reference to `dev_err'
Segmentation fault

fix this by adding the dm/device_compat.h to includes

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
3 years agoMerge tag 'video-for-v2021.04' of https://source.denx.de/u-boot/custodians/u-boot...
Tom Rini [Fri, 19 Mar 2021 12:20:19 +0000 (08:20 -0400)]
Merge tag 'video-for-v2021.04' of https://source.denx.de/u-boot/custodians/u-boot-video

 - drop unprintable characters from video font header

3 years agoMerge branch '2021-03-17-assorted-fixes'
Tom Rini [Thu, 18 Mar 2021 16:53:35 +0000 (12:53 -0400)]
Merge branch '2021-03-17-assorted-fixes'

- Make tests search /sbin for tools, don't use ENODATA in host tools to
  be more portable, avb fix when partition isn't found and a bugfix for
  mediatek mmc.

3 years agotest: Include /sbin to the PATH when creating ext4 disk image
Andy Shevchenko [Thu, 11 Feb 2021 14:40:09 +0000 (16:40 +0200)]
test: Include /sbin to the PATH when creating ext4 disk image

On some distributions the mkfs.ext4 is under /sbin and /sbin is not set
for mere users. Include /sbin to the PATH when creating ext4 disk image,
so that users won't get a scary traceback from Python.

Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agoavb: Fix error when partition not found
schspa [Thu, 25 Feb 2021 16:19:10 +0000 (00:19 +0800)]
avb: Fix error when partition not found

part_get_info_by_name will return -1 on error, and >0 on success.

Signed-off-by: schspa <schspa@gmail.com>
Cc: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
3 years agoimage: Avoid -ENODATA in host tools
Simon Glass [Wed, 24 Feb 2021 13:50:32 +0000 (08:50 -0500)]
image: Avoid -ENODATA in host tools

Unfortunately -ENODATA is not available in OpenBSD. Use -EBADMSG
instead, to indicate a missing timestamp.

Fixes: c5819701a3d image: Adjust the workings of fit_check_format()
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
3 years agommc: mtk-sd: don't ignore max-frequency from device tree
Daniel Golle [Mon, 15 Mar 2021 15:31:11 +0000 (15:31 +0000)]
mmc: mtk-sd: don't ignore max-frequency from device tree

commit e58e68d9 ("mmc: mtk-sd: assign plat->cfg.f_max with a correct value")
wrongly assumed that plat->cfg.f_max is always unset at the time
mscd_drv_probe() is run. This is not true in case max-frequency being
defined in device tree, as it is then already set by mmc_of_parse()
in msdc_of_to_plat().
Only set plat->cfg.f_max to the default maximum value in case it is
not already set to a sane value.

Fixes: e58e68d93e ("mmc: mtk-sd: assign plat->cfg.f_max with a correct value")
Cc: Stefan Roese <sr@denx.de>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoMerge tag 'efi-2021-04-rc5' of https://source.denx.de/u-boot/custodians/u-boot-efi
Tom Rini [Tue, 16 Mar 2021 12:21:51 +0000 (08:21 -0400)]
Merge tag 'efi-2021-04-rc5' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2021-04-rc5

Bug fixes:

* fix memory type for memory reservation block
* illegal cast to pointer in initrddump
* fix compiler warnings

Documentation:

* move README.dfu to HTML documentation

3 years agodoc: move README.dfu to HTML documentation
Heinrich Schuchardt [Fri, 5 Mar 2021 11:58:37 +0000 (12:58 +0100)]
doc: move README.dfu to HTML documentation

Move README.dfu to doc/usage/dfu.rst and convert to reStructured text.

In the long run this page should be split into two. One for the overview
and one for the dfu command. UEFI capsule updates and dfutftp should be
integrated into the overview page.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoefi: Fix compiler warnings
Simon Glass [Sun, 7 Feb 2021 21:27:02 +0000 (14:27 -0700)]
efi: Fix compiler warnings

This occur when building on Raspberry Pi 400 (32-bit ARM). Fix them.

Examples:

cmd/efidebug.c: In function ‘do_efi_capsule_update’:
cmd/efidebug.c:75:49: warning: cast from pointer to integer of different
size [-Wpointer-to-int-cast]
  ret = EFI_CALL(RT->update_capsule(&capsule, 1, (u64)NULL));
                                                 ^
include/efi_loader.h:104:9: note: in definition of macro ‘EFI_CALL’
  typeof(exp) _r = exp; \
         ^~~
cmd/efidebug.c:75:49: warning: cast from pointer to integer of different
size [-Wpointer-to-int-cast]
  ret = EFI_CALL(RT->update_capsule(&capsule, 1, (u64)NULL));
                                                 ^
include/efi_loader.h:104:19: note: in definition of macro ‘EFI_CALL’
  typeof(exp) _r = exp; \
                   ^~~

In file included from include/common.h:20,
                 from lib/efi_loader/efi_capsule.c:9:
lib/efi_loader/efi_capsule.c: In function ‘efi_update_capsule’:
include/efi_loader.h:83:8: warning: format ‘%lu’ expects argument of type
‘long unsigned int’, but argument 10 has type ‘size_t’
{aka ‘unsigned int’} [-Wformat=]
  debug("%sEFI: Entry %s(" format ")\n", __efi_nesting_inc(), \
        ^~~~~~~~~~~~~~~~~~
include/linux/printk.h:37:21: note: in definition of macro ‘pr_fmt’
 #define pr_fmt(fmt) fmt
                     ^~~
include/log.h:229:2: note: in expansion of macro ‘log’
  log(LOG_CATEGORY, LOGL_DEBUG, fmt, ##args); \
  ^~~
include/log.h:249:2: note: in expansion of macro ‘debug_cond’
  debug_cond(_DEBUG, fmt, ##args)
  ^~~~~~~~~~
include/efi_loader.h:83:2: note: in expansion of macro ‘debug’
  debug("%sEFI: Entry %s(" format ")\n", __efi_nesting_inc(), \
  ^~~~~
lib/efi_loader/efi_capsule.c:444:2: note: in expansion of macro ‘EFI_ENTRY’
  EFI_ENTRY("%p, %lu, %llu\n", capsule_header_array, capsule_count,
  ^~~~~~~~~
lib/efi_loader/efi_capsule.c:444:19: note: format string is defined here
  EFI_ENTRY("%p, %lu, %llu\n", capsule_header_array, capsule_count,
                 ~~^
                 %u

Signed-off-by: Simon Glass <sjg@chromium.org>
Replace (uintptr_t)NULL by 0.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoefi_selftest: Remove loadfile2 for initrd selftests
Ilias Apalodimas [Sat, 13 Mar 2021 21:47:32 +0000 (23:47 +0200)]
efi_selftest: Remove loadfile2 for initrd selftests

We are redefining how u-boot locates the initrd to load via the kernel
LoadFile2 protocol.  This selftest is not relevant any more, so remove
it. A new one will be added later

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agomkeficapsule: Correct printf() strings
Simon Glass [Sun, 7 Feb 2021 21:27:01 +0000 (14:27 -0700)]
mkeficapsule: Correct printf() strings

Use %z when printing size_t values. This avoids errors on 32-bit
machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
Use a conversion to size_t for printing stat.st_size.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoefi_selftest: illegal cast to pointer in initrddump
Heinrich Schuchardt [Sun, 14 Mar 2021 09:12:01 +0000 (10:12 +0100)]
efi_selftest: illegal cast to pointer in initrddump

On 32bit systems u64 cannot directly be cast to void *.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoefi_loader: fix memory type for memory reservation block
Mark Kettenis [Sun, 14 Mar 2021 19:04:24 +0000 (20:04 +0100)]
efi_loader: fix memory type for memory reservation block

The (yet unreleased version of the) devicetree specification clearly
states that:

  As with the /reserved-memory node, when booting via UEFI
  entries in the Memory Reservation Block must also be listed
  in the system memory map obtained via the GetMemoryMap() toi
  protect against allocations by UEFI applications. The memory
  reservation block entries should be listed with type
  EfiReservedMemoryType.

This restores the behaviour that was changed by commit 4cbb2930bd8c
("efi_loader: consider no-map property of reserved memory").

Fixes: 4cbb2930bd8c ("efi_loader: consider no-map property of reserved memory")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoefi_loader: disable GRUB_ARM32_WORKAROUND on ARCH_SUNXI
Heinrich Schuchardt [Wed, 3 Mar 2021 13:05:05 +0000 (14:05 +0100)]
efi_loader: disable GRUB_ARM32_WORKAROUND on ARCH_SUNXI

GRUB_ARM32_WORKAROUND can be disabled on ARCH_SUNXI as the Allwinner SoCs
only have a level 2 cache controlled via CP15 and not an architecturally
defined cache. Having the cache available speeds up booting Linux.

On ARCH_BCM283X it is already disabled via rpi_2_defconfig. But let's move
this setting to Kconfig.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agoPrepare v2021.04-rc4
Tom Rini [Mon, 15 Mar 2021 16:06:41 +0000 (12:06 -0400)]
Prepare v2021.04-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agoconfigs: Resync with savedefconfig
Tom Rini [Mon, 15 Mar 2021 14:50:47 +0000 (10:50 -0400)]
configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agoMerge tag 'ti-v2021.04-rc4' of https://source.denx.de/u-boot/custodians/u-boot-ti
Tom Rini [Mon, 15 Mar 2021 12:43:29 +0000 (08:43 -0400)]
Merge tag 'ti-v2021.04-rc4' of https://source.denx.de/u-boot/custodians/u-boot-ti

- Fix boot for da850-evm and omap3_logic
- Optimize SPL size for am65x boards

3 years agoMerge tag 'u-boot-stm32-20210312' of https://source.denx.de/u-boot/custodians/u-boot-stm
Tom Rini [Mon, 15 Mar 2021 12:43:19 +0000 (08:43 -0400)]
Merge tag 'u-boot-stm32-20210312' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver
- stm32mp1_trusted_defconfig rely on SCMI support
- Remove the nand MTD configuration for NOR boot in stm32mp1 board
- STM32programmer update
- Bsec: manage clock when present in device tree
- stm32mp15: move bootdelay configuration in defconfig
- Update for stm32 dsi and dw_mipi_dsi
- STM32 MCU's cleanup
- Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags
- Update stm32mp1 doc

3 years agoconfigs: am65x_evm_r5: Enable checks for spl and stack sizes
Lokesh Vutla [Tue, 9 Mar 2021 18:02:45 +0000 (23:32 +0530)]
configs: am65x_evm_r5: Enable checks for spl and stack sizes

Enable relevant configs that checks for the size of image and stack:

 BSS: 3KB
 Initial MALLOC: ~22KB
 Initial Stack: 8K
 SPL Image size can be: ~215KB

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
3 years agoinclude: configs: am65x_evm: Optimize size of SPL BSS
Lokesh Vutla [Tue, 9 Mar 2021 18:02:44 +0000 (23:32 +0530)]
include: configs: am65x_evm: Optimize size of SPL BSS

Current BSS allocation of SPL is as below:
$ size spl/u-boot-spl
   text    data     bss     dec     hex filename
 132369    7852    1496  141717   22995 spl/u-boot-spl

But 20KB is allocated currently for BSS. Reduce it to 3KB and save some
space for stack.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
3 years agoARM: da850-evm: Fix boot issues from missing SPL_PAD_TO
Adam Ford [Sat, 6 Mar 2021 02:48:50 +0000 (20:48 -0600)]
ARM: da850-evm: Fix boot issues from missing SPL_PAD_TO

In a previous attempt to unify config options and remove items
from the whitelist file, SPL items were moved into a section
enabled with CONFIG_SPL_BUILD.  Unfortunately, SPL_PAD_TO
is referenced at the head Makefile and uses this define
to create padding of the output file.  When it was moved
to CONFIG_SPL_BUILD, it caused boot errors with devices
that are not booting from NOR.  Fix the boot issues by moving
SPL_PAD_TO out so it's always.

Fixes: 7bb33e4684aa ("ARM: da850-evm: Unify config options with Kconfig")
Signed-off-by: Adam Ford <aford173@gmail.com>
3 years agoconfigs: omap3_logic: Enable CONFIG_SPL_ALLOC_BD
Adam Ford [Thu, 4 Mar 2021 16:31:58 +0000 (10:31 -0600)]
configs: omap3_logic: Enable CONFIG_SPL_ALLOC_BD

With bd_info dropped from the data section, the Logic PD OMAP3 boards
and AM3517 fail to boot. Enabling CONFIG_SPL_ALLOC_BD restores
them.

Fixes: 38d6b7ebdaee ("spl: Drop bd_info in the data section")
Signed-off-by: Adam Ford <aford173@gmail.com>
3 years agodoc: stm32mp1: Use u-boot.itb if CONFIG_SPL_LOAD_FIT=y
Marek Vasut [Sat, 6 Mar 2021 20:44:17 +0000 (21:44 +0100)]
doc: stm32mp1: Use u-boot.itb if CONFIG_SPL_LOAD_FIT=y

For systems where SPL loads fitImage, i.e. CONFIG_SPL_LOAD_FIT=y, use
u-boot.itb in the relevant documentation parts. Otherwise use u-boot.img.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
3 years agoMerge https://source.denx.de/u-boot/custodians/u-boot-marvell
Tom Rini [Fri, 12 Mar 2021 13:00:39 +0000 (08:00 -0500)]
Merge https://source.denx.de/u-boot/custodians/u-boot-marvell

- Some more updates/sync's to A38x DDR3 code (Marek & Pali)
- marvell/ddr/AXP: Some type fixes found in the LTO work (Marek)
- Espressobin: Enable more options (Pali)
- pci-aardvark: Implement workaround for the readback value of
  VEND_ID (Paili)

3 years agoarm: stm32mp: Fix compilation issue when SYS_DCACHE_OFF and/or SYS_DCACHE_SYS are...
Patrice Chotard [Wed, 24 Feb 2021 12:53:27 +0000 (13:53 +0100)]
arm: stm32mp: Fix compilation issue when SYS_DCACHE_OFF and/or SYS_DCACHE_SYS are enabled

Fix following compilation issue when SYS_DCACHE_OFF and/or SYS_DCACHE_SYS
are enabled :

arch/arm/mach-stm32mp/cpu.c: In function ‘early_enable_caches’:
arch/arm/mach-stm32mp/cpu.c:223:10: error: ‘volatile struct arch_global_data’ has no member named ‘tlb_size’
  223 |  gd->arch.tlb_size = PGTABLE_SIZE;
      |          ^
arch/arm/mach-stm32mp/cpu.c:224:10: error: ‘volatile struct arch_global_data’ has no member named ‘tlb_addr’
  224 |  gd->arch.tlb_addr = (unsigned long)&early_tlb;
      |          ^

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
3 years agoboard: st: Remove board_early_init_f and board_late_init callbacks for stm32 boards
Patrice Chotard [Wed, 24 Feb 2021 12:38:20 +0000 (13:38 +0100)]
board: st: Remove board_early_init_f and board_late_init callbacks for stm32 boards

Remove board_early_init_f() and board_late_init() callbacks for stm32
boards as the corresponding flags (CONFIG_BOARD_LATE_INIT and
CONFIG_BOARD_EARLY_INIT_R) are now disabled.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
3 years agoconfigs: stm32: Remove BOARD_EARLY_INIT_F and BOARD_LATE_INIT for stm32 boards
Patrice Chotard [Wed, 24 Feb 2021 12:38:19 +0000 (13:38 +0100)]
configs: stm32: Remove BOARD_EARLY_INIT_F and BOARD_LATE_INIT for stm32 boards

These flags was defined and callbacks linked to these flags are empty
and only returning 0.
Remove BOARD_EARLY_INIT_F and BOARD_LATE_INIT flags for these stm32 boards.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
3 years agoarm: mvebu: a38x: Remove dead code ARMADA_39X
Pali Rohár [Fri, 5 Mar 2021 14:52:42 +0000 (15:52 +0100)]
arm: mvebu: a38x: Remove dead code ARMADA_39X

Config option ARMADA_39X is never set so remove all dead code hidden under
ifdef CONFIG_ARMADA_39X blocks.

Also remove useless checks for CONFIG_ARMADA_38X define as this macro is
always defined for a38x code path.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
3 years agoarm: a37xx: pci: Implement workaround for the readback value of VEND_ID
Pali Rohár [Wed, 3 Mar 2021 13:37:59 +0000 (14:37 +0100)]
arm: a37xx: pci: Implement workaround for the readback value of VEND_ID

Marvell Armada 3720 Functional Errata, Guidelines, and Restrictions
document describes in erratum 4.1 PCIe value of vendor ID (Ref #: 243):

    The readback value of VEND_ID (RD0070000h [15:0]) is 1B4Bh, while it
    should read 11ABh.

    The firmware can write the correct value, 11ABh, through VEND_ID
    (RD0076044h [15:0]).

Implement this workaround in U-Boot PCIe controller driver aardvark for
both PCI vendor id and PCI subsystem vendor id.

This change affects PCI vendor id of PCIe root bridge emulated by Linux
kernel. With this change Linux kernel reports correct vendor id 11AB.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
3 years agoarm: mvebu: Espressobin: Enable additional options
Pali Rohár [Wed, 3 Mar 2021 10:34:53 +0000 (11:34 +0100)]
arm: mvebu: Espressobin: Enable additional options

Enable support for NVMe disks which can be connected to mPCIe slot via M.2
reduction. Enable btrfs and squashfs filesystems which are used by more
Linux distributions. And enable fsuuid and setexpr commands which can be
useful in scripting.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>