Simon Glass [Fri, 11 Aug 2023 01:33:18 +0000 (19:33 -0600)]
bootstd: Add a command to read all files for a bootflow
Some bootflows (such as EFI and ChromiumOS) delay reading the kernel until
it is needed to boot. This saves time when scanning and avoids needing to
allocate memory for something that may never be used.
To permit reading of these files, add a new 'bootflow read' command.
Simon Glass [Sun, 30 Jul 2023 17:17:00 +0000 (11:17 -0600)]
bootstd: Allow display of the x86 setup information
Provide an option to dump this information if available.
Move the funciion prototype to the common x86 header. Allow the command
line to be left out since 'bootflow info' show this itself and it is
not in the correct place in memory until the kernel is actually booted.
Simon Glass [Sun, 30 Jul 2023 17:16:57 +0000 (11:16 -0600)]
bootstd: cros: Add a function to read info from partition
The code to read the ChromiumOS information from the partition is
currently all in one function. It reads the entire kernel, which is
unnecessary unless it is to be booted.
Create a new function which reads just the minimum required data from the
disk, then obtains what it needs from there.
For now this function is not used. Future work will plumb it in.
Simon Glass [Sun, 30 Jul 2023 17:16:56 +0000 (11:16 -0600)]
bootstd: Add private bootmeth data to the bootflow
Some bootmeths need to store their own information related to the
bootflow, in addition to the generic information in struct bootflow.
Add a pointer for this.
Simon Glass [Sun, 30 Jul 2023 17:16:55 +0000 (11:16 -0600)]
bootstd: cros: Add private info for ChromiumOS
Create a new private structure to hold information gleaned from the disk.
This will allow separation between reading of the bootflow information and
(later) reading the whole kernel.
Simon Glass [Sun, 30 Jul 2023 17:16:53 +0000 (11:16 -0600)]
bootstd: Move common zimage functions to bootm.h
We want to avoid using #ifdefs around header files and in the code. It
makes sense to collect the various functions used for loading images into
a single header which can be included by all architectures. The best place
for this is the arch-neutral bootm.h header, so use that.
Move some zimage functions into this bootm.h header.
Simon Glass [Sun, 30 Jul 2023 17:16:49 +0000 (11:16 -0600)]
bootstd: cros: Bring in some ChromiumOS structures
Add a header file with structures for booting ChromiumOS, taken from the
vboot tree. Using these makes it easier to understand the code.
Note that the code style has not been updated for U-Boot, with use of
uint64_t, __attribute__((packed)) and one comment-style nit. This should
make it easier to keep the code in sync. It was taken from commit:
Tom Rini [Wed, 9 Aug 2023 17:15:51 +0000 (13:15 -0400)]
Merge branch '2023-08-09-misc-cleanups' into next
- Rework the arch linker scripts to be consistent for all, support
Kconfig fragments in the board directory and fix some Kconfig options
that were hex-type by default of 0 not 0x0.
Jason Kacines [Tue, 11 Jul 2023 21:20:46 +0000 (16:20 -0500)]
scripts: kconfig: Add config fragment support in board/../
Add support to config fragments (.config) located in the /board
directory. This will allow only base defconfigs to live in /configs and
all fragments to live in their respective device directory in /board/..
Shiji Yang [Thu, 3 Aug 2023 01:47:17 +0000 (09:47 +0800)]
treewide: unify the linker symbol reference format
Now all linker symbols are declared as type char[]. Though we can
reference the address via both the array name 'var' and its address
'&var'. It's better to unify them to avoid confusing developers.
This patch converts all '&var' linker symbol refrences to the most
commonly used format 'var'.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Shiji Yang [Thu, 3 Aug 2023 01:47:16 +0000 (09:47 +0800)]
treewide: rework linker symbol declarations in sections header
1. Convert all linker symbols to char[] type so that we can get the
corresponding address by calling array name 'var' or its address
'&var'. In this way, we can avoid some potential issues[1].
2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has
not been referenced by any source code.
3. Move '__data_end' to the arch x86's own sections header as it's
only used by x86 arch.
4. Remove some duplicate declared linker symbols. Now we use the
standard header file to declare them.
[1] This patch fixes the boot failure on MIPS target. Error log:
SPL: Image overlaps SPL
Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 2 Aug 2023 15:09:43 +0000 (11:09 -0400)]
Kconfigs: Correct default of "0" on hex type entries
It is not a parse error to have a default value of "0" for a "hex" type
entry, instead of "0x0". However, "0" and "0x0" are not treated the
same even by the tools themselves. Correct this by changing the default
value from "0" to "0x0" for all hex type questions that had the
incorrect default. Fix one instance (in two configs) of a default of "0"
being used on a hex question to be "0x0". Remove the cases where a
defconfig had set a value of "0x0" to be used as the default had been
"0".
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
If an error message contains a function name, it should match the name of
the function throwing the message.
Fixes: 7739d93d8288 ("pci: Match region flags using a mask") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Dan Carpenter [Thu, 3 Aug 2023 10:29:34 +0000 (13:29 +0300)]
btrfs: fix some error checking for btrfs_decompress()
The btrfs_decompress() function mostly (u32)-1 on error but it can
also return -EPERM or other kernel error codes from zstd_decompress().
The "ret" variable is an int, so we could just check for negatives.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Qu Wenruo <wqu@suse.com>
Dan Carpenter [Mon, 31 Jul 2023 14:08:29 +0000 (17:08 +0300)]
expo: allocate correct amount of memory
This should be allocating the memory for "item" instead of "menu".
The item struct is 48 bytes instead of 96 (assuming a 64bit system)
so this saves a little memory.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Dan Carpenter [Wed, 26 Jul 2023 06:59:52 +0000 (09:59 +0300)]
fdt: off by one in ofnode_lookup_fdt()
The "oftree_count" is the number of entries which have been set in
the oftree_list[] array. If all the entries have been initialized then
this off by one would result in reading one element beyond the end
of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Dan Carpenter [Wed, 26 Jul 2023 06:59:04 +0000 (09:59 +0300)]
fs: btrfs: Prevent error pointer dereference in list_subvolums()
If btrfs_read_fs_root() fails with -ENOENT, then we go to the next
entry. Fine. But if it fails for a different reason then we need
to clean up and return an error code. In the current code it
doesn't clean up but instead dereferences "root" and crashes.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Qu Wenruo <wqu@suse.com>
Dan Carpenter [Wed, 26 Jul 2023 06:58:34 +0000 (09:58 +0300)]
cros_ec: Fix an error code is cros_ec_get_sku_id()
The ec_command_inptr() function returns negative error codes or
the number of bytes that it was able to read. The cros_ec_get_sku_id()
function should return negative error codes. Right now it returns
positive error codes or negative byte counts.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Dan Carpenter [Tue, 25 Jul 2023 06:50:26 +0000 (09:50 +0300)]
cmd: Fix a size parameter in test_readonly()
The parentheses are in the wrong place so this passes the number of
bytes to write as "sizeof(index_0) != TPM_SUCCESS" when just
"sizeof(index_0)" was intended. (1 byte vs 4 bytes).
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Both the Linux kernel and libbsd agree that strlcpy() should always
return strlen(src) and not include the NUL termination. The incorrect
U-Boot implementation makes it impossible to check the return value for
truncation, and breaks code written with the usual implementation in
mind (for example, fdtdec_add_reserved_memory() was subtly broken).
I reviewed all callers of strlcpy() and strlcat() and fixed them
according to my understanding of the intended function.
In [1] Sam points out an assertion does not hold true for 32-bit
platforms, which only impacts Large File Support (LFS) API usage
in erofs-utils according to Xiang [2]. We don't think these APIs
are used in u-boot and this restriction could be safely removed.
Fixes: 3a21e92fc255 ("fs/erofs: Introduce new features including ztailpacking, fragments and dedupe") Signed-off-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn> Tested-by: Sam Edwards <CFSworks@gmail.com>
CONFIG_$(SPL_TPL_)SYS_MALLOC_F_LEN is defined as hex. If set to zero
manually, .config contains '0x0' and not '0' as value.
The default value for CONFIG_SPL_SYS_MALLOC_F_LEN should not be set to 0
but to 0x0 if CONFIG_SPL_FRAMEWORK=n to match a manually set value.
Fixes: c0126bd862a0 ("spl: Support bootstage, log, hash and early malloc in TPL") Fixes: b61694705217 ("SPL: Do not enable SPL_SYS_MALLOC_SIMPLE without SPL_FRAMEWORK by default") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Tom Rini <trini@konsulko.com>
There is another SPL_MD5 option defined in lib/Kconfig.
Renaming SPL_MD5_SUPPORT introduced duplicate option with
different description. As for now FIT and hash algorithm options
are not related to each others, removing a duplicate option seems OK.
Mathew McBride [Mon, 7 Aug 2023 01:41:08 +0000 (01:41 +0000)]
board: ten64: add missing error checks for retimer power on
The retimer reset/power on logic was changed in a recent commit,
however, it neglected to check if the commands sent to the
board microcontroller (to control power to the retimer chip)
actually completed.
Add return checks for these operations so any failures will
be reported to the user.
Signed-off-by: Mathew McBride <matt@traverse.com.au> Fixes: 7a041fea2 ("board: traverse: ten64: ensure retimer reset
is done on new board revisions")
Marek Vasut [Sun, 6 Aug 2023 18:57:34 +0000 (20:57 +0200)]
ARM: renesas: Update MAINTAINERS file
Update MAINTAINERS file. Add missing MAINTAINERS file for Spider,
Whitehawk and V3HSK boards. Update mail addresses. Add file globs
to match on DT and driver files related to these boards.
The GRPEACH and R2DPLUS are special in that they are not R-Car
and have their own set of specialized drivers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Fri, 4 Aug 2023 21:07:44 +0000 (17:07 -0400)]
Azure: Squash a number of jobs and re-order slightly
To reduce overall job time, move a number of smaller jobs together.
These should still be safely under 1 hour total time, but reducing the
overall number of jobs should help with the queue slightly.
Tom Rini [Fri, 4 Aug 2023 20:46:15 +0000 (16:46 -0400)]
Azure: Rework Rockchip jobs again
The job for rockchip vendor platforms has again gotten close to or
exceeded one hour. Rework things such that we move the 32bit platforms
back to the general 32bit ARM job (as there's time there) and make these
build only the 64bit platforms.
Lukas Funke [Thu, 3 Aug 2023 15:22:15 +0000 (17:22 +0200)]
binman: etype: Add xilinx-bootgen etype
This adds a new etype 'xilinx-bootgen'. By using this etype it is
possible to created an signed SPL (FSBL in Xilinx terms) for
ZynqMP boards.
The etype uses Xilinx Bootgen tools in order to transform the SPL into
a bootable image and sign the image with a given primary and secondary
public key. For more information to signing the FSBL please refer to the
Xilinx Bootgen documentation.
For this to work the hash of the primary public key has to be fused
into the ZynqMP device and authentication (RSA_EN) has to be set.
For testing purposes: if ppk hash check should be skipped one can add
the property 'fsbl_config = "bh_auth_enable";' to the etype. However,
this should only be used for testing(!).
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Lukas Funke [Thu, 3 Aug 2023 15:22:13 +0000 (17:22 +0200)]
binman: btool: Add Xilinx Bootgen btool
Add the Xilinx Bootgen as bintool. Xilinx Bootgen is used to create
bootable SPL (FSBL in Xilinx terms) images for Zynq/ZynqMP devices. The
btool creates a signed version of the SPL. Additionally to signing the
key source for the decryption engine can be passend to the boot image.
Tom Rini [Fri, 4 Aug 2023 16:06:21 +0000 (12:06 -0400)]
cmd: Enable BIND by default if we have USB_ETHER
The nature of the network stack means that if we are going to use the
gadget mode USB network driver there's no easy path to implicitly
bind/unbind the driver. Enable the "bind" command by default here so
that we can bind/unbind this as needed.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Marek Vasut [Fri, 4 Aug 2023 15:41:11 +0000 (17:41 +0200)]
usb: gadget: ether: Handle gadget driver registration in probe and remove
Move the ethernet gadget driver registration and removal from ethernet
bind and unbind callbacks into driver DM probe and remove callbacks.
This way, when the driver is bound, which is triggered deliberately
using 'bind' command, the USB ethernet gadget driver is instantiated
and bound to the matching UDC. In reverse, when the driver is unbound,
which is again triggered deliberately using 'unbind' command, the USB
ethernet gadget driver instance is removed.
Effectively, this now behaves like running either 'ums' or 'dfu' or
any other commands utilizing USB gadget functionality.
This also drops use of usb_gadget_release() and moves the use of
usb_gadget_initialize() into usb_ether_init() used only by legacy
platforms that do not use 'bind' command properly yet. Those have
no place in drivers.
Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Marek Vasut [Fri, 4 Aug 2023 15:41:10 +0000 (17:41 +0200)]
usb: gadget: ether: Move probe function above driver structure
Move the driver probe function above the driver structure, so it
can be placed alongside other related functions, like upcoming
remove function. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Tom Rini <trini@konsulko.com> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Two Toradex platform series. First, to quote Andrejs:
This series adds Yavia Carrier board name string to the known
Toradex carrier board list, and reworks carrier board and display
adapter name handling.
And then to quote Marcel:
This series adds initial support for the Toradex Verdin AM62 SoM.
The first commit adds resp. PID4s to the ConfigBlock, the second one
fixes an early clocking issue confirmed to be a weird bug in TI's
scripting, the third one fixes some binman labeling issue. And last but
not least support for the Toradex Verdin AM62 is added.
Marcel Ziswiler [Fri, 4 Aug 2023 10:08:08 +0000 (12:08 +0200)]
board: toradex: add verdin am62 support
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT
V1.0A module and subsequent V1.1 launch configuration SKUs. They are
strapped to boot from their on-module eMMC. U-Boot supports booting
from the on-module eMMC only, DFU support is disabled for now due to
missing AM62x USB support.
The device trees were taken straight from Linux v6.5-rc1.
Boot sequence is:
SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE
---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img)
Marcel Ziswiler [Fri, 4 Aug 2023 10:08:06 +0000 (12:08 +0200)]
arm: mach-k3: am62: fix 2nd mux option of clkout0
Fix second mux option of clkout0 which should really be
DEV_BOARD0_CLKOUT0_IN_PARENT_HSDIV4_16FFT_MAIN_2_HSDIVOUT1_CLK10
rather than twice the same according to [1].
Max Krummenacher [Tue, 18 Jul 2023 09:07:34 +0000 (11:07 +0200)]
toradex: tdx-cfg-block: rework display adapter name handling
Rework the rather big array of zero length strings with 4 entries of
actual display adapter names to a array of structs which ties a pid4
to its correspondent human readable string.
Provide an accessor to get the string for a given PID4.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Max Krummenacher [Tue, 18 Jul 2023 09:07:33 +0000 (11:07 +0200)]
toradex: tdx-cfg-block: rework carrier board name handling
Rework the rather big array of zero length strings with 4 entries of
actual carrier board names to a array of structs which ties a pid4
to its correspondent human readable string.
Provide an accessor to get the string for a given PID4.
Rework the user of the information to use the accessor.
Note that check_pid8_sanity() is used for early samples of Dahlia and
the development board. Yavia isn't affected.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Simon Glass [Thu, 27 Jul 2023 03:01:25 +0000 (21:01 -0600)]
bootstd: Init the size before reading extlinux file
The implementation in extlinux_pxe_getfile() does not pass a valid size
to bootmeth_read_file(), so this can fail if the uninited value happens to
be too small.
Simon Glass [Thu, 27 Jul 2023 03:01:24 +0000 (21:01 -0600)]
bootstd: Init the size before reading the devicetree
The implementation in distro_efi_try_bootflow_files() does not pass a
valid size to bootmeth_common_read_file(), so this can fail if the
uninted value happens to be too small.
Fix this.
This was reported by someone but I cannot now find the email.
Simon Glass [Thu, 27 Jul 2023 03:01:23 +0000 (21:01 -0600)]
bootstd: Avoid allocating memory for the EFI file
The current bootflow-iteration algorithm reads the bootflow file into
an allocated memory buffer so it can be examined. This works well in
most cases.
However, while the common case is that the first bootflow is immediately
booted, it is also possible just to scan for available bootflows, perhaps
selecting one to boot later.
Even with the common case, EFI bootflows can be quite large. It doesn't
make sense to read it into an allocated buffer when we have kernel_addr_t
providing a suitable address for it. Even if we do have plenty of malloc()
space available, it is a violation of U-Boot's lazy-init principle to
read the bootflow before it is needed.
So overall it seems better to make a change.
Adjust the logic to read just the size of the EFI file at first. Later,
when the bootflow is booted, read the rest of the file into the designated
kernel buffer.
Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Da Xue <da@libre.computer> Reported-by: Vincent Stehlé <vincent.stehle@arm.com>
Simon Glass [Thu, 27 Jul 2023 03:01:22 +0000 (21:01 -0600)]
bootstd: Use a function to detect network in EFI bootmeth
This checks for a network-based bootflow in two places, one of which is
less than ideal. Move the correct test into a function and use it in both
places.
The FAT file systems uses character '\xe5' to mark a deleted directory
entry. If a file name starts with this character, it is substituted by
'\x05' in the directory entry.
While (signed char)'\xe5' is a negative number 0xe5 is a positive integer
number. We therefore have define a constant DELETED_MARK which matches the
signedness of the characters in the directory entry.
Correct a comparison where we used the constant 0xe5 with the wrong sign.
Use the constant aRING instead of 0x05 like in the rest of the code.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 57b745e2387a ("fs: fat: call set_name() only once") Fixes: 28cef9ca2e86 ("fs: fat: create correct short names") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 25 Jul 2023 22:31:53 +0000 (18:31 -0400)]
vexpress64: Rework MAINTAINERS file slightly
Given that we no longer have a configs/vexpress_aemv8a_defconfig file,
drop that and then include at least the aarch64-specific config.h file
here. Also move Linus and Peter up to the main entry as well so that
they'll get tagged for the board code too and not literally only the
defconfig.
Sean Anderson [Tue, 18 Oct 2022 18:12:46 +0000 (14:12 -0400)]
freescale: Remove Rajesh Bhagat MAINTAINERS
Rajesh's email bounces. Remove his email from all boards he maintains.
Fortunately, he has co-maintainers on most boards. I have taken the
liberty of volunteering Pramod to maintain the LS1012AFRDM, since he
also maintains the LS1012AFRWY. Let me know if the board should be
orphaned instead.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Tom Rini [Thu, 3 Aug 2023 16:43:24 +0000 (12:43 -0400)]
Merge tag 'efi-2023-10-rc2-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2023-10-rc2-2
Documentation:
* Move README.falcon to HTML
* Describe usage of QEMU virtio block device
* Add SPDX license identifiers to svg images
* Add more detail to the description of U-Boot boot phases
UEFI:
* Fix buffer overflows
* Fix memory leak in efi_add_memory_map_pg
* Properly check return values of calloc, uuid_str_to_bin,
efi_parse_pkcs7_header
Merge in a series for MediaTek update and another for Ten64.
To quote Weijie Gao for MediaTek:
This patch series add support for MediaTek MT7988 SoC with its reference
boards and related drivers.
This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for
these boards. The clock, pinctrl drivers and the SoC initializaton code
are also included.
Product spec for MT7988:
https://www.mediatek.com/products/broadband-wifi/mediatek-filogic-880
And to quote Mathew McBride for Ten64:
This is a series of updates for the Ten64 board,
that are part of our firmware releases but not yet upstreamed
into U-Boot.
Changes of note include:
- Turning on standard boot support
Standard boot improves the user experience over distroboot on Ten64,
as we had various hacks in our firmware to solve some corner-case
issues (e.g DTB handling) in distroboot, which are not needed with the
bootflow system.
- Recognition of the new 'RevD' board variant distributed to OEM
customers
- Fixing various boot issues related to FIT images and operating systems
running out of the NAND (OpenWrt, recovery environment).
- A better 'opt-out' solution for fsl_setenv_bootcmd for Layerscape
platforms booting from TF-A.
This was discussed when the Ten64 was upstreamed into U-Boot. I think
declaring fsl_setenv_bootcmd as __weak and allowing individual boards
to override is the best way to do this without significant rework.
(We actually depend on a similar feature for the DPAA2/MC firmware
loading)
Compared to our firmware branch, there is still a few features missing (e.g USB
Hub, fan controller and fixes for the VSC8514). Some of these depend on other
things (like sorting out device tree schemas) so may not appear in mainline
U-Boot for a while yet.
board: ten64: strip extra u-boot compatibles from FDT
The u-boot version of the LS1088A device tree has
an extra compatible (simple-mfd) added to &fsl_mc
to facilitate usage with U-Boot's device model.
Unfortunately FreeBSD will only match the single
"fsl,qoriq-mc" exactly when the node is a "bus"
object, so we need to strip out the extra compatible
before presenting it to the operating system.
Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Peng Fan <peng.fan@nxp.com>
arch: arm: fsl-layerscape: allow "opt-out" of fsl_setenv_bootcmd
Allow individual Layerscape boards to opt-out of fsl_setenv_bootcmd
by declaring the original function as weak.
fsl_setenv_bootcmd is used to change the bootcmd based on the
TF-A boot source (e.g QSPI vs SD/MMC) for reasons including
secure boot / integrity measurements and DPAA2 configuration loading.
See previous discussion at [1].
On the Ten64 board, our bootcmd is the same across
all TF-A boot sources so we don't want this behaviour.
board: traverse: ten64: fix allocation order of MAC addresses
On Ten64 boards, the "serial number" is the MAC address of the
first Gigabit Ethernet interface (labelled GE0 on the appliance),
and counted up from there.
The previous logic did not take into account U-Boot's ordering
of the network interfaces. By setting aliases/ethernetX in the device
tree we can ensure the U-Boot 'ethX' is the same as the labelled
port order on the unit, as well as the one adopted by Linux.
board: traverse: ten64: init nvme devices in late boot to ensure bootflow availability
Ensure nvme devices are scanned before reaching the shell,
otherwise extra user intervention ("nvme scan") is required
before they are visible to bootdev/bootflow.
Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Peng Fan <peng.fan@nxp.com>
projects / u-boot.git / log