Ilias Apalodimas [Fri, 16 Jun 2023 08:42:52 +0000 (11:42 +0300)]
doc: qemu: switch swtpm instruction to 'tpm autostart'
We don't have a documentation page for our TPM subsystem. I plan
on sending one in the future, but in the meantime document the
new 'tpm autostart' command in the QEMU instructions while using
a SWTPM
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
On commit e663b2ff4ba2("tpm: Add 'tpm autostart' shell command") an
autostart function was added for both TPM1.2 and 2.0 devices. Instead
of correctly wiring the autostart command for TPM1.2 devices that patch
mistakenly added it on 'tpm init'
+ Implement OpenSBI DBCN extension for early debug console
+ Fixes for VisionFive2 board
+ Fix timer missing
+ Fix L2 LIM issue
+ Enable PCIE auto enumeration to support USB and NVMe by default
+ Set eth0 mac address properly
+ Add __noreturn attribute to spl_invoke_opensbi
Starfive JH7110 needs to clear L2 LIM to zero before use or ECC error
would be triggered. Currently, we use DDR ram for SPL malloc arena on
Visionfive 2 board in defconfig, but it's also possible to use L2 LIM as
SPL malloc arena. To avoid triggering ECC error in this scenario, we
imply SPL_SYS_MALLOC_CLEAR_ON_INIT as default.
Signed-off-by: Bo Gan <ganboing@gmail.com> Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Shengyu Qu [Tue, 22 Aug 2023 14:33:56 +0000 (22:33 +0800)]
configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2
Although PCIE driver already exists, board defconfig isn't configured to
enable PCIE enum on boot, thus USB storage device and NVME drive are not
supported by default. So modify defconfig to enable PCIE auto enum, then
start USB subsystem and scan nvme drive on boot.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Tested-by: Milan P. Stanić <mps@arvanta.net>
Torsten Duwe [Mon, 14 Aug 2023 16:05:28 +0000 (18:05 +0200)]
riscv: allow riscv timer to be instantiated via device tree
For the architectural timer on riscv, there already is a defined
device tree binding[1]. Allow timer instances to be created from
device tree matches, but for now retain the old mechanism, which
registers the timer biggy-back with the CPU.
Tom Rini [Tue, 5 Sep 2023 01:12:28 +0000 (21:12 -0400)]
nokia_rx51: Remove platform
This platform is behind on migrations (it is the sole user of the oldest
legacy version of the USB gadget stack and is long overdue for
migration) and with Pali no longer being a maintainer, we remove this
platform.
Fabio Estevam [Wed, 23 Aug 2023 17:59:09 +0000 (14:59 -0300)]
thermal: imx_tmu: Increase the log level for high temperatures
dev_info() message is not printed by default. Increase the log level
to dev_crit(). This allows the critical messages related to the temperature
getting beyong the alert threshold to be displayed.
Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
Fabio Estevam [Wed, 23 Aug 2023 17:59:08 +0000 (14:59 -0300)]
thermal: imx_tmu: Fix the polling default
When the 'polling-delay' property is not passed via devicetree,
pdata->polling_delay keeps at 0. This causes the imx_tmu driver to get
stuck inside the busy while() loop when the CPU temperature is above
the alert point.
Fix this problem by passing a one second polling interval, which provides
a proper delay to let the system to cool down and exit the while() loop
when the temperature is below the alert point.
The original logic always enables USB_DR_MODE_HOST operation mode in
dwc3_layerscape_bind() in u-boot. Prevent choosing USB_DR_MODE_HOST
operation mode if USB_HOST is not enabled.
Elena Popa [Tue, 8 Aug 2023 11:58:26 +0000 (14:58 +0300)]
arm: imx: imx8m: imx9: Fix DRAM size calculation due to rom_pointer
If dram_init_banksize() is called from SPL, the rom_pointer, at that
point, is not correctly initialized. This causes wrong calculation of
DRAM start and size in dram_init_banksize(). The issue became apparent
only in Falcon Mode. Added an extra condition to prevent using
rom_pointer in SPL.
Signed-off-by: Elena Popa <elena.popa@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
Marek Vasut [Sat, 5 Aug 2023 03:40:02 +0000 (05:40 +0200)]
ARM: imx: Select 2 DRAM banks on Data Modul i.MX8M Mini eDM SBC
U-Boot splits DRAM bank spanning addresses below and above the 32bit
boundary into two DRAM banks. Since this platform may come with 4GiB
of DRAM, increase the DRAM bank count to 2.
Marek Vasut [Tue, 25 Jul 2023 15:24:43 +0000 (17:24 +0200)]
ARM: imx: Drop CONFIG_USE_BOOTCOMMAND=n on i.MX6 DHSOM
This board certainly does use default 'run distro_bootcmd' boot command,
make sure this is set in 'bootcmd' variable.
Fixes: 970bf8603b8 ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
Marcel Ziswiler [Mon, 28 Aug 2023 22:01:53 +0000 (00:01 +0200)]
doc: board: toradex: minor documentation update
- Update SPDX-License-Identifier from obsolete GPL-2.0+ to
GPL-2.0-or-later.
- Add links to product websites of SoM and carrier board where missing.
- Add information about update U-Boot wrapper where missing.
- Add sectionauthor where missing.
- Update information about imx-seco from version 3.7.4 to 3.8.1.
- Various minor grammatic and spelling fixes.
- Improve whitespace by adding or removing new lines.
- Change from code-block for output to just Output::.
- A few platform-specific config/dts updates to fix issues, drop a
temporary change in binman, update the MAINTAINERS file to remove
Wolfgang Denk, fix a typo, fix a corner case with bootstd, update
Azure to not timeout so easily, and fix a case where we would omit
some files in SPL.
Tom Rini [Sun, 20 Aug 2023 17:31:26 +0000 (13:31 -0400)]
Azure: Set the timeout for jobs to the maximum
As per current Azure Pipelines documentation we qualify for 3600 minutes
per job, if specified, as the timeout. The default unspecified timeout
is 60 minutes. Rework things to specify 0 as the timeout (and so maximum
allowed) so that we don't have failures due to running slightly past 60
minutes total.
Andrew Davis [Mon, 21 Aug 2023 13:59:10 +0000 (08:59 -0500)]
configs: Enable CONFIG_DM_SCSI in am57xx_hs_evm_usb
This should have already been enabled but was missed when converting the
base platform defconfig, fix this here.
Fixes: 3c5aa6caccab ("configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm") Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias Apalodimas [Thu, 24 Aug 2023 14:21:09 +0000 (17:21 +0300)]
efi_loader: delete handle from events when a protocol is uninstalled
When a notification event is registered for a protocol the handle of the
protocol is added in our event notification list. When all the protocols
of the handle are uninstalled we delete the handle but we do not remove
it from the event notification list.
Clean up the protocol removal functions and add a wrapper which
- Removes the to-be deleted handle from any lists it participates
- Remove the handle if no more protocols are present
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Nishanth Menon [Thu, 24 Aug 2023 15:40:36 +0000 (10:40 -0500)]
doc: board: ti: k3: Convert to sphinx-prompt
Sphinx-prompt provides a handy scheme to provide documentation that
renders nicely and yet provides a scheme to copy paste for users without
having to hand-edit the copied text as is the result of code-block
[1] https://lore.kernel.org/all/87fs48rgto.fsf@baylibre.com/ Reported-by: Simon Glass <sjg@chromium.org> Suggested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Nishanth Menon [Thu, 24 Aug 2023 15:40:35 +0000 (10:40 -0500)]
doc: sphinx: Add sphinx-prompt
Sphinx-prompt[1] helps bring-in '.. prompt::' option that allows a
better rendered documentation, yet be able to copy paste without
picking up the prompt from rendered documentation.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Use code-block. Fix length of two heading underlines. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Do not assume that partitions are numbered continuously starting at 1.
Only a single partition table type can exist on a block device. If we found
a GPT partition table, we must not re-enumerate with the MBR partition
driver which would find the protective partition.
Fixes: 12fc1f3bb223 ("cmd: gpt: add eMMC and GPT support") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
If hash_calculate is invoked with region_count = 0, it will try to hash
INT_MAX regions. We should check this parameter.
* Avoid a comparison with different signedness.
* Check that region_count is at least 1.
* Avoid a superfluous assignment.
Fixes: b37b46f042cc ("rsa: Use checksum algorithms from struct hash_algo") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Mon, 10 Jul 2023 08:44:10 +0000 (10:44 +0200)]
ARM: dts: stm32mp13: remove shmem for scmi-optee
CFG_STM32MP1_SCMI_SHM_SYSRAM will be disabled by default for STM32MP13x
SoCs in next OP-TEE version and the OP-TEE SMCI server uses the OP-TEE
native shared memory registered by clients.
To be compatible by default with this configuration this patch removes
the shared memory in the SCMI configuration and the associated reserved
memory in SRAM.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Mon, 10 Jul 2023 08:44:09 +0000 (10:44 +0200)]
ARM: dts: stm32mp15: remove shmem for scmi-optee
Since OP-TEE commit 89ba3422ee80 ("plat-stm32mp1: scmi_server: default
use OP-TEE shared memory"), integrated in OP-TEE 3.22.0-rc1
the default configuration for STM32MP15x SoCs changes,
CFG_STM32MP1_SCMI_SHM_SYSRAM is disabled by default and the OP-TEE SMCI
server uses ithe OP-TEE native shared memory registered by clients.
To be compatible by default with this configuration and the next OP-TEE
version, this patch removes the SHMEM in the SCMI configuration and the
associated reserved memory in the last 4KByte page of SRAM,
in the STM32MP15 device tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tim Harvey [Thu, 13 Jul 2023 18:56:07 +0000 (11:56 -0700)]
phy: phy-imx8mq-usb: add vbus regulator support
Add support for enabling and disabling vbus-supply regulator found
on several imx8mp boards in the usb3_phy0 and usb3_phy1 nodes.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Adam Ford <aford173@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
usb: dwc3: Fix remove function if there is no ulpi_reset gpio
As ulpi_reset gpio is now optional, we need to check it when doing
the 'dwc3_generic_remove' function. Check if it is declared before
accessing the ulpi_reset.
Fixes: 237d1f60b1d ("usb: dwc3: Use the devm_gpiod_get_optional()
API for reset gpio")
Reported-by: Thomas Nizan <tnizan@witekio.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Tom Rini [Wed, 23 Aug 2023 15:03:46 +0000 (11:03 -0400)]
Merge tag 'doc-2023-10-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for doc-2023-10-rc4
Documentation:
* Fix documentation for TI boards
* Describe running on VirtualBox
* List build dependencies for building documenation
* Add references to U-Boot talks
Other:
* Fix error handling in the setexpr command (printf_str)
Documentation extended with specific information for VirtualBox
The configuration for EFI is enhanced to start U-Boot at VirtualBox (x86_64)
with all features like booting with help of boot scripts and extended linux.
This documentation describes how to use U-Boot at VirtualBox to boot
Linux systems with a some simple example.
Signed-off-by: Thomas Mittelstaedt <thomas.mittelstaedt@de.bosch.com>
doc: board: ti: k3: Fix up OpenOCD references and debug info
Fix minor path and config macro name updates to sync with latest
OpenOCD and U-Boot configurations.
Fixes: effe50854a69 ("doc: board: ti: k3: Add a guide to debugging with OpenOCD") Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Nishanth Menon [Tue, 22 Aug 2023 16:41:01 +0000 (11:41 -0500)]
doc: board: ti: j721e: provide image alt text
Provide alternative text for image.
Fixes: 3b83dff183b5 ("doc: board: ti: j721e: Convert the image format to svg") Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Tue, 22 Aug 2023 16:41:00 +0000 (11:41 -0500)]
doc: board: ti: j7200: provide image alt text
Provide alternative text for image.
Fixes: f4ade09a1e76 ("doc: board: ti: j7200: Convert the image format to svg") Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com>
Fixes: 34f76921d801 ("doc: board: ti: am62x: Convert the image format to svg") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com>
Chanho Park [Fri, 18 Aug 2023 05:11:03 +0000 (14:11 +0900)]
riscv: cpu: make riscv_cpu_probe to EVT_DM_POST_INIT_R callback
Since the Patch 55171aedda88, VisionFive2 booting has been broken [1].
VisionFive2 board requires to enable CONFIG_TIMER_EARLY but booting went
to panic from initr_dm_devices due to lack of a timer device.
Thus, we need to move riscv_cpu_probe function in order to register
the timer earlier than initr_dm_devices.
Fixes: 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events") Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Tested-by: Milan P. Stanić <mps@arvanta.net> Tested-by: Roland Ruckerbauer <mail@ruabmbua.dev> Tested-by: Roland Ruckerbauer <mail@ruabmbua.dev>
Chanho Park [Fri, 18 Aug 2023 05:11:02 +0000 (14:11 +0900)]
dm: event: add EVT_DM_POST_INIT_R event type
This patch introduces EVT_DM_POST_INIT_R event type for handling hooks
after relocation.
Fixes: 55171aedda88 ("dm: Emit the arch_cpu_init_dm() even only before relocation") Suggested-by: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Tested-by: Milan P. Stanić <mps@arvanta.net> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Roland Ruckerbauer <mail@ruabmbua.dev> Tested-by: Roland Ruckerbauer <mail@ruabmbua.dev>
Fixed missing event name in event.c: Signed-off-by: Simon Glass <sjg@chromium.org>