Simon Glass [Wed, 3 Feb 2021 13:01:00 +0000 (06:01 -0700)]
dtoc: Process nodes to set up required properties
Add logic to assign property values to nodes as required by dtoc. The
references allow nodes to refer to each other in C code. The macros used
by dtoc are not yet defined in driver model. They will be added along
with the actual driver model implementation.
Simon Glass [Wed, 3 Feb 2021 13:00:55 +0000 (06:00 -0700)]
dtoc: Support scanning of structs in header files
Drivers can have private / platform data contained in structs and these
struct definitions are generally kept in header files. In order to
generate build-time devices, dtoc needs to generate code that declares
the data contained in those structs. This generated code must include the
relevant header file, to avoid a build error.
We need a way for dtoc to scan header files for struct definitions. Then,
when it wants to generate code that uses a struct, it can make sure it
includes the correct header file, first.
Add a parser for struct information, similar to drivers. Keep a dict of
the structs that were found.
Simon Glass [Wed, 3 Feb 2021 13:00:54 +0000 (06:00 -0700)]
dtoc: Support scanning of uclasses
Uclasses can have per-device private / platform data so dtoc needs to
scan these drivers. This allows it to find out the size of this data so
it can be allocated a build time.
Add a parser for uclass information, similar to drivers. Keep a dict of
the uclasses that were found.
Simon Glass [Wed, 3 Feb 2021 13:00:53 +0000 (06:00 -0700)]
dtoc: Collect priv/plat struct info from drivers
In order to output variables to hold the priv/plat information used by
each device, dtoc needs to know the struct for each. With this, it can
declare this at build time:
u8 xxx_priv [sizeof(struct <name>)];
Collect the various struct names from the drivers.
Simon Glass [Wed, 3 Feb 2021 13:00:52 +0000 (06:00 -0700)]
dtoc: Ignore unwanted files when scanning for drivers
We should ignore anything in the .git directory or any of the
build-sandbox, etc. directories created by 'make check'. These can confuse
dtoc. Update the code to ignore these.
Simon Glass [Wed, 3 Feb 2021 13:00:51 +0000 (06:00 -0700)]
dtoc: Save scan information across test runs
At present most of the tests scan the U-Boot source tree as part of their
run. This information does not change across tests, so we can save time
by remembering it.
Add a way to set up this information and use it for each test, taking a
copy first, so as not to mess up the original.
This reduces the run time from about 1.6 seconds to 1.5 seconds on my
machine. For code coverage (which cannot run in parallel), it reduces from
33 seconds to 5.
Simon Glass [Wed, 3 Feb 2021 13:00:50 +0000 (06:00 -0700)]
dtoc: Scan drivers for available information
At present we simply record the name of a driver parsed from its
implementation file. We also need to get the uclass and a few other
things so we can instantiate devices at build time. Add support for
collecting this information. This requires parsing each driver file.
UEFI test files like helloworld.efi require an architecture specific
PE-COFF header.
Currently this does not work for cross compiling. If $CROSS_COMPILE is set,
use the first part of the architecture triplet from the variable to
choose the PE-COFF header.
Now we can cross-compile the sandbox, e.g.
make sandbox_defconfig NO_SDL=1
CROSS_COMPILE=/opt/bin/aarch64-linux-gnu- NO_SDL=1 MK_ARCH=aarch64 make
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 23 Jan 2021 15:56:15 +0000 (08:56 -0700)]
patman: Quieten down the alias checking
When a tag is used in a patch subject (e.g. "tag: rest of message") and
it cannot be found as an alias, patman currently reports a fatal error,
unless -t is provided, in which case it reports a warning.
Experience suggest that the fatal error is not very useful. Instead,
default to reporting a warning, with -t tell patman to ignore it
altogether.
Simon Glass [Sun, 21 Mar 2021 19:22:53 +0000 (08:22 +1300)]
azure: Use --board flag with sandbox_spl
At present there is only one board which uses sandbox SPL. But with
sandbox_noinst being added, this is no longer true. Add a --board flag
so that we just build one board on azure, as is done in gitlab.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Weijie Gao [Tue, 9 Mar 2021 07:52:31 +0000 (15:52 +0800)]
tools: mtk_image: add an option to set device header offset
This patch adds an option which allows setting the device header offset.
This is useful if this tool is used to generate ATF BL2 image of mt7622 for
SD cards.
Weijie Gao [Fri, 5 Mar 2021 02:35:39 +0000 (10:35 +0800)]
serial: mtk: rewrite the setbrg function
Currently the setbrg logic of serial-mtk is messy, and should be rewritten.
Also an option is added to make it possible to use highspeed-3 mode for all
bauds.
The new logic is:
1. If baud clock > 12MHz
a) If baud <= 115200, highspeed-0 mode will be used (ns16550 compatible)
b) If baud <= 576000, highspeed-2 mode will be used
c) any bauds > 576000, highspeed-3 mode will be used
2. If baud clock <= 12MHz
Forced highspeed-3 mode
a) If baud <= 115200, calculates the divisor using DIV_ROUND_CLOSEST
b) any bauds > 115200, the same as 1. c)
Weijie Gao [Fri, 5 Mar 2021 02:27:46 +0000 (10:27 +0800)]
dts: mt7629: enable JTAG pins by default
The EPHY LEDs belongs to the built-in FE switch of MT7629, which is barely
used. These LED pins on reference boards are used as JTAG socket. So it's
a good idea to change the default state to JTAG, and this will make it
convenience for debugging.
Weijie Gao [Fri, 5 Mar 2021 02:22:26 +0000 (10:22 +0800)]
pinctrl: mediatek: do not probe gpio driver if not enabled
The mtk pinctrl driver is a combination driver with support for both
pinctrl and gpio. When this driver is used in SPL, gpio support may not be
enabled, and this will result in a compilation error.
To fix this, macros are added to make sure gpio related code will only be
compiled when gpio support is enabled.
Fabien Parent [Mon, 15 Feb 2021 18:07:44 +0000 (19:07 +0100)]
board: mediatek: rename pumpkin board into mt8516
More than one pumpkin board has been made with different MediaTek SoCs.
Rename the pumpkin board to follow the naming convention of all
other MediaTek boards and also to not be confusing when other pumpkin
boards will be added in follow-up commits.
Biju Das [Mon, 1 Mar 2021 17:08:49 +0000 (17:08 +0000)]
arm: rmobile: Add HopeRun HiHope RZ/G2H board support
The HiHope RZ/G2H board from HopeRun consists of main board
(HopeRun HiHope RZ/G2H main board) and sub board(HopeRun
HiHope RZ/G2H sub board). The HiHope RZ/G2H sub board sits
below the HiHope RZ/G2H main board.
This patch adds the required board support to boot HopeRun HiHope
RZ/G2H board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Biju Das [Mon, 1 Mar 2021 17:08:48 +0000 (17:08 +0000)]
arm: rmobile: Add HopeRun HiHope RZ/G2N board support
The HiHope RZ/G2N board from HopeRun consists of main board
(HopeRun HiHope RZ/G2N main board) and sub board(HopeRun
HiHope RZ/G2N sub board). The HiHope RZ/G2N sub board sits
below the HiHope RZ/G2N main board.
This patch adds the required board support to boot HopeRun HiHope
RZ/G2N board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Biju Das [Mon, 1 Mar 2021 17:08:47 +0000 (17:08 +0000)]
arm: rmobile: Add HopeRun HiHope RZ/G2M board support
The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.
This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tom Rini [Mon, 15 Mar 2021 12:43:19 +0000 (08:43 -0400)]
Merge tag 'u-boot-stm32-20210312' of https://source.denx.de/u-boot/custodians/u-boot-stm
- Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver
- stm32mp1_trusted_defconfig rely on SCMI support
- Remove the nand MTD configuration for NOR boot in stm32mp1 board
- STM32programmer update
- Bsec: manage clock when present in device tree
- stm32mp15: move bootdelay configuration in defconfig
- Update for stm32 dsi and dw_mipi_dsi
- STM32 MCU's cleanup
- Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags
- Update stm32mp1 doc
Adam Ford [Sat, 6 Mar 2021 02:48:50 +0000 (20:48 -0600)]
ARM: da850-evm: Fix boot issues from missing SPL_PAD_TO
In a previous attempt to unify config options and remove items
from the whitelist file, SPL items were moved into a section
enabled with CONFIG_SPL_BUILD. Unfortunately, SPL_PAD_TO
is referenced at the head Makefile and uses this define
to create padding of the output file. When it was moved
to CONFIG_SPL_BUILD, it caused boot errors with devices
that are not booting from NOR. Fix the boot issues by moving
SPL_PAD_TO out so it's always.
Fixes: 7bb33e4684aa ("ARM: da850-evm: Unify config options with Kconfig") Signed-off-by: Adam Ford <aford173@gmail.com>
The Secure Channel Protocol 03 command sends control requests
(enable/provision) to the TEE implementing the protocol between the
processor and the secure element.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org>
Adds support for a working SCP03 emulation. Input parameters are
validated however the commands (enable, provision) executed by the TEE
are assumed to always succeed.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org>
Enable and provision the SCP03 keys on a TEE controlled secured elemt
from the U-Boot shell.
Executing this command will generate and program new SCP03 encryption
keys on the secure element NVM.
Depending on the TEE implementation, the keys would then be stored in
some persistent storage or better derived from some platform secret
(so they can't be lost).
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
common: SCP03 control (enable and provision of keys)
This Trusted Application allows enabling SCP03 as well as provisioning
the keys on TEE controlled secure element (ie, NXP SE050).
All the information flowing on buses (ie I2C) between the processor
and the secure element must be encrypted. Secure elements are
pre-provisioned with a set of keys known to the user so that the
secure channel protocol (encryption) can be enforced on the first
boot. This situation is however unsafe since the keys are publically
available.
For example, in the case of the NXP SE050, these keys would be
available in the OP-TEE source tree [2] and of course in the
documentation corresponding to the part.
To address that, users are required to rotate/provision those keys
(ie, generate new keys and write them in the secure element's
persistent memory).
For information on SCP03, check the Global Platform HomePage and
google for that term [1]
[1] globalplatform.org
[2] https://github.com/OP-TEE/optee_os/
check:
core/drivers/crypto/se050/adaptors/utils/scp_config.c
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 7 Feb 2021 21:27:05 +0000 (14:27 -0700)]
test: acpi: Fix warnings on 32-bit build
Some format strings use the wrong type. Fix them.
Example warnings:
In file included from test/dm/acpi.c:22:
test/dm/acpi.c: In function ‘dm_test_acpi_cmd_list’:
test/dm/acpi.c:362:21: warning: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 4 has type ‘unsigned int’ [-Wformat=]
ut_assert_nextline("RSDP %08lx %06lx (v02 U-BOOT)", addr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(struct acpi_rsdp));
~~~~~~~~~~~~~~~~~~~~~~~~
include/test/ut.h:282:33: note: in definition of macro ‘ut_assert_nextline’
if (ut_check_console_line(uts, fmt, ##args)) { \
^~~
Simon Glass [Sun, 7 Feb 2021 21:27:04 +0000 (14:27 -0700)]
tpm: Correct warning on 32-bit build
Fix the warning:
drivers/tpm/tpm2_tis_sandbox.c: In function ‘sandbox_tpm2_xfer’:
drivers/tpm/tpm2_tis_sandbox.c:288:48: warning: format ‘%ld’ expects
argument of type ‘long int’, but argument 2 has type ‘size_t’
{aka ‘unsigned int’} [-Wformat=]
printf("TPM2: Unmatching length, received: %ld, expected: %d\n",
~~^
%d
send_size, length);
~~~~~~~~~
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass [Thu, 21 Jan 2021 03:10:54 +0000 (20:10 -0700)]
log: Add return-checking macros for 0 being success
The existing log_ret() and log_msg_ret() macros consider an error to be
less than zero. But some function may return a positive number to indicate
a different kind of failure. Add macros to check for that also.
Simon Glass [Thu, 21 Jan 2021 03:10:53 +0000 (20:10 -0700)]
log: Handle line continuation
When multiple log() calls are used which don't end in newline, the
log prefix is prepended multiple times in the same line. This makes the
output look strange.
Fix this by detecting when the previous log record did not end in newline.
In that case, setting a flag.
Drop the unused BUFFSIZE in the test while we are here.
As an example implementation, update log_console to check the flag and
produce the expected output.
Simon Glass [Thu, 21 Jan 2021 03:10:52 +0000 (20:10 -0700)]
log: Set up a flag byte for log records
At present only a single flag (force_debug) is used in log records. Before
adding more, convert this into a bitfield, so more can be added without
using more space.
To avoid expanding the log_record struct itself (which some drivers may
wish to store in memory) reduce the line-number field to 16 bits. This
provides for up to 64K lines which should be enough for anyone.
Simon Glass [Mon, 8 Mar 2021 00:35:16 +0000 (17:35 -0700)]
test: sandbox: Move sandbox test docs into doc/develop
At present some of the documentation about running sandbox tests is in the
sandbox docs. It makes more sense to put it in with the other testing
docs, with a link there from sandbox. Update the documentation
accordingly.
Also add a paragraph explaining why sandbox exists and the test philosophy
that it uses.
Simon Glass [Mon, 8 Mar 2021 00:35:15 +0000 (17:35 -0700)]
spl: test: Add a test for spl_load_simple_fit()
As an example of an SPL test, add a new test for loading a FIT within
SPL. This runs on sandbox_spl. For this to work, the text base is adjusted
so that there is plenty of space available.
While we are here, document struct spl_load_info properly, since this is
currently ambiguous.
This test only verifies the logic path. It does not actually check that
the image is loaded correctly. It is not possible for sandbox's SPL to
actually run u-boot.img since it currently includes u-boot.bin rather than
u-boot. Further work could expand the test in that direction.
Simon Glass [Mon, 8 Mar 2021 00:35:14 +0000 (17:35 -0700)]
spl: Convert spl_fit to work with sandbox
At present this casts addresses to pointers so cannot work with sandbox.
Update the code to use map_sysmem() instead.
As part of this change, the existing load_ptr is renamed to src_ptr since
it is not a pointer to load_addr. It is confusing to use a similar name
for something that is not actually related. For the alignment code,
ALIGN() is used instead of open-coded alignment. Add a comment to the line
that casts away a const.
Use a (new) load_ptr variable to access memory at address load_addr.
Simon Glass [Mon, 8 Mar 2021 00:35:13 +0000 (17:35 -0700)]
sandbox: Update os_find_u_boot() to find the .img file
At present this function can only locate the u-boot ELF file. For SPL it
is handy to be able to locate u-boot.img since this is what would normally
be loaded by SPL.
Add another argument to allow this to be selected.
While we are here, update the function to load SPL when running in TPL,
since that is the next stage.
Simon Glass [Mon, 8 Mar 2021 00:35:11 +0000 (17:35 -0700)]
test: Rename all linker lists to have a ut_ prefix
At present each test suite has its own portion of the linker_list section
of the image, but other lists are interspersed. This makes it hard to
enumerate all the available tests without knowing the suites that each one
is in.
Place all tests together in a single contiguous list by giving them
common prefix not used elsewhere in U-Boot. This makes it possible to find
the start and end of all tests.
Simon Glass [Mon, 8 Mar 2021 00:35:10 +0000 (17:35 -0700)]
test: Add a macros for finding tests in linker_lists
At present we use the linker list directly. This is not very friendly, so
add a helpful macro instead. This will also allow us to change the naming
later without updating this code.
Simon Glass [Mon, 8 Mar 2021 00:35:07 +0000 (17:35 -0700)]
test: Move the devicetree check into ut_run_list()
Add a check to ut_run_list() as to whether a list has driver model tests.
Move the logic for the test devicetree into that function, in an effort
to eventually remove all logic from dm_test_run().
Simon Glass [Mon, 8 Mar 2021 00:35:06 +0000 (17:35 -0700)]
test: Use return values in dm_test_run()
Update this function to use the return value of ut_run_list() to check for
success/failure, so that they are in sync. Also return a command success
code so that the caller gets what it expects.
Simon Glass [Mon, 8 Mar 2021 00:35:04 +0000 (17:35 -0700)]
test: Use a local variable for test state
At present we use a global test state for all driver-model tests. Make use
of a local struct like we do with the other tests.
To make this work, add functions to get and set this state. When a test
starts, the state is set (so it can be used in the test). When a test
finishes, the state is unset, so it cannot be used by mistake.
Simon Glass [Mon, 8 Mar 2021 00:35:03 +0000 (17:35 -0700)]
test: Add ut_run_test_live_flat() to run tests twice
Driver model tests are generally run twice, once with livetree enable and
again with it disabled. Add a function to handle this and call it from the
driver model test runner.
Make ut_run_test() private since it is not used outside test-main.c now.
Simon Glass [Mon, 8 Mar 2021 00:35:01 +0000 (17:35 -0700)]
test: Use ut_run_test() to run driver model tests
Instead of having a separate function for running driver model tests, use
the common one. Make the pre/post-run functions private since we don't
need these outside of test-main.c
Simon Glass [Mon, 8 Mar 2021 00:34:57 +0000 (17:34 -0700)]
test: Drop struct dm_test_state
Driver model is a core part of U-Boot. We don't really need to have a
separate test structure for the driver model tests and it makes it harder
to write a test if you have to think about which type of test it is.
Subsume the fields from struct dm_test_state into struct unit_test_state
and delete the former.
Simon Glass [Mon, 8 Mar 2021 00:34:56 +0000 (17:34 -0700)]
test: Handle driver model reinit in test_pre_run()
For driver model tests we want to reinit the data structures so that
everything is in a known state before the test runs. This avoids one test
changing something that breaks a subsequent tests.
projects / u-boot.git / log