Xiaobo Tian [Sat, 27 Feb 2021 14:39:11 +0000 (22:39 +0800)]
arm64: rk3399: Add support NanoPi R4s
NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support,
including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port.
port.It also has two GPIO headers which allows further peripherals to be used.
The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1].
Roger Pau Monné [Mon, 22 Feb 2021 09:25:58 +0000 (10:25 +0100)]
odroid-go2: do not disable EFI
Remove the unset of the EFI loader, it's possible for U-Boot to
provide a EFI environment on this board, and it's also required by
the FreeBSD loader which mandated EFI on Aarch64.
Signed-off-by: Roger Pau Monné <royger@FreeBSD.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
rockchip: rk3399-puma: Increase environment size to 16 kiB.
On Puma we have the environment at an offset of 16 kiB.
On the eMMC this gives us 16 kiB for the environment before the SPL starts.
On the SPI NOR we also have 16 kiB until end of flash.
So let's increase the environment size from 8 kiB to its maximum
of 16 kiB for both MMC and SPI NOR.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
A commit from last year re-imported the DTS files form the upstream kernel.
By doing so the VDD_LOG regulator in the board's DTS was dropped.
Let's restore this, but move it into the u-boot overlay to prevent this
issue in the future.
Fixes: 167efc2c7a46 ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux") Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Rock960 doesn't have SPI flash on-board, but the bits
get enabled by default which means when booting we get
some errors. Explicitly disable it to stop the errors.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Heiko Stuebner [Tue, 9 Feb 2021 13:47:08 +0000 (14:47 +0100)]
rockchip: rk3368: sync main rk3368 dtsi from Linux
This is the state as of v5.10 + the recently added timer0 phandle
targetted at the 5.12 merge window.
With this the non-mainline nodes like the dmc move to a separate
rk3368-u-boot.dtsi that is included from the board-specific
-u-boot.dtsi files, similar to how rk3399 does this.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Heiko Stuebner [Tue, 9 Feb 2021 13:47:06 +0000 (14:47 +0100)]
rockchip: rk3368: move STACK_R_ADDR address and into Kconfig
With the STACK_R_ADDR at 0x600000 (6MB) we're competing with
with the loading address of either u-boot or atf parts, so move
that away to 0x4000000 (64MB) similar to rk3399.
Only lion currently sets that at all but not sheep the second
rk3368 board, so just move that to the Kconfig for rk3368 similar
to rk3399 as well.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Heiko Stuebner [Tue, 9 Feb 2021 13:47:03 +0000 (14:47 +0100)]
rockchip: rk3368: adjust CONFIG_SYS_LOAD_ADDR
CONFIG_SYS_LOAD_ADDR currently is at 0x00280000 which is only 512KB
behind the area where we load u-boot to, which depending on u-boot size
may overlap at some point.
So for safety just pick the same value rk3399 has and set
CONFIG_SYS_LOAD_ADDR to 0x00800800 on rk3368 as well.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Using a non-default SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR setting makes the
resulting u-boot-rockchip.bin unbootable, as it gets stuck after SPL.
Removing the setting from the defconfig allows U-Boot to load
successfully.
Signed-off-by: Roger Pau Monné <royger@FreeBSD.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Simon Glass [Sun, 21 Mar 2021 05:24:38 +0000 (18:24 +1300)]
dtoc: Support adding subnodes alongside existing ones
So far we have only needed to add subnodes to empty notds, so have not
had to deal with ordering. However this feature is needed for binman's
expanded nodes, since there may be another node in the same section.
While libfdt adds new properties after existing properties, it adds new
subnodes before existing subnodes. This means that we must reorder the
nodes in the cached version, so that the ordering remains consistent.
Update the sync implementation to sync existing subnodes first, then
add new ones, then tidy up the ordering in the cached version. Update the
test to cover this behaviour.
Also improve the comment about property syncing while we are here.
Simon Glass [Sun, 21 Mar 2021 05:24:37 +0000 (18:24 +1300)]
dtoc: Add a subnode test for multiple nodes
Add a new test that adds a subnode alongside an existing one, as well as
adding properties to a subnode. This will expand to adding multiple
subnodes in future patches. Put a node after the one we are adding to so
we can check that things sync correctly.
The testAddNode() test should be in the TestNode class since it is a node
test, so move it.
Simon Glass [Sun, 21 Mar 2021 05:24:36 +0000 (18:24 +1300)]
dtoc: Tweak ordering of fdt-offsets refreshing
Once the tree has been synced, thus potentially moving things around in the
fdt, we set _cached_offsets to False so that a refresh will happen next
time a property is accessed.
This 'lazy' refresh doesn't really save much time, since refresh is a very
fast operation, just a single walk of the tree. Also, having the refresh
happen in the bowels of property access it makes it harder to figure out
what is going on.
Simplify the code by always doing a refresh before and after a sync. Set
_cached_offsets to True immediately after this, in the Refresh() function,
since this makes more sense than doing it in the caller.
Simon Glass [Sun, 21 Mar 2021 05:24:35 +0000 (18:24 +1300)]
dtoc: Tidy up property-offset handling
If a property does not yet have an offset, then that means it exists in
the cache'd fdt but has not yet been synced back to the flat tree. Use
the dirty flag for this so we don't need to check the offset too. Improve
the comments for Prop and Node to make it clear what an offset of None
means.
Also clear the dirty flag after the property is synced.
Simon Glass [Sun, 21 Mar 2021 05:24:33 +0000 (18:24 +1300)]
binman: Support default alignment for sections
Sometimes it is useful to specify the default alignment for all entries
in a section, such as when word-alignment is necessary, for example. It
is tedious and error-prone to specify this individually for each section.
Simon Glass [Sun, 21 Mar 2021 05:24:32 +0000 (18:24 +1300)]
binman: Support obtaining section contents immediately
Generally the content of sections is not built until the final assembly
of the image. This is partly to avoid wasting time, since the entries
within sections may change multiple times as binman works through its
various stages. This works quite well since sections exist in a strict
hierarchy, so they can be processed in a depth-first manner.
However the 'collection' entry type does not have this luxury. If it
contains a section within its 'content' list, then it must produce the
section contents, if available. That section is typically a sibling
node, i.e. not part oc the collection's hierarchy.
Add a new 'required' argument to section.GetData() to support this. When
required is True, any referenced sections are immediately built. If this
is not possible (because one of the subentries does not have its data yet)
then an error is produced.
The test for this uses a 'collection' entry type, referencing a section as
its first member. This forces a call to _BuildSectionData() with required
set to False, at first, then True later, when the image is assembled.
Simon Glass [Sun, 21 Mar 2021 05:24:31 +0000 (18:24 +1300)]
binman: Add support for a collection of entries
The vblock entry type includes code to collect the data from a number of
other entries (not necessarily subentries) and concatenating it. This is
a useful feature for other entry types.
Make it a base class, so that vblock can use it, along with other entry
types.
Simon Glass [Sun, 21 Mar 2021 05:24:30 +0000 (18:24 +1300)]
binman: Allow disabling expanding an entry
At present there is a command-line flag to disable substitution of expanded
entries. Add an option to the entry node as well, so it can be controlled
at the node level.
Add a test to cover this. Fix up the comment to the checkSymbols() function
it uses, while we are here.
Simon Glass [Sun, 21 Mar 2021 03:50:07 +0000 (16:50 +1300)]
x86: coral: Show memory config and SKU ID on startup
Provide the model information through sysinfo so that it shows up on
boot. For memconfig 4 pins are provided, for 16 combinations. For SKU
ID there are two options:
- two pins provided in a ternary arrangement, for 9 combinations.
- reading from the EC
Add a binding doc and drop the unused #defines as well.
Simon Glass [Sun, 21 Mar 2021 03:50:06 +0000 (16:50 +1300)]
sysinfo: Allow showing model info from sysinfo
Some boards may want to show the SKU ID or other information obtained at
runtime. Allow this to come from sysinfo. The board can then provide a
sysinfo driver to provide it.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 15 Mar 2021 05:11:24 +0000 (18:11 +1300)]
sandbox: Correct uninit conflict
It is not possible to remove the state before driver model is uninited,
since the devices are allocated in the memory buffer. Also it is not
possible to uninit driver model afterwards, since the RAM has been
freed.
Drop the uninit altogether, since it is not actually necessary.
Simon Glass [Mon, 15 Mar 2021 05:11:21 +0000 (18:11 +1300)]
command: Fix operation of !CONFIG_CMDLINE
The U_BOOT_CMDREP_COMPLETE() macro produces a build error if CONFIG_CMDLINE
is not enabled. Fix this by updating the macro to provide the 'repeatable'
arugment in this case.
Simon Glass [Mon, 15 Mar 2021 05:11:17 +0000 (18:11 +1300)]
sf: Support querying write-protect
This feature was dropped from U-Boot some time ago:
f12f96cfaf5 (sf: Drop spl_flash_get_sw_write_prot")
However, we do need a way to see if a flash device is write-protected,
since if it is, it may not be possible to write to do (i.e. failing to
write is expected).
I am not sure of the correct layer to implement this, so this patch is a
stab at it. If spi-flash makes sense then I will add to the 'sf' also.
Re the points mentioned in the removal commit:
1) This kind of requirement can be achieved using existing
flash operations and flash locking API calls instead of
making a separate flash API.
Which uclass is this?
2) Technically there is no real hardware user for this API to
use in the source tree.
I do want coral (at least) to support this.
3) Having a flash operations API for simple register read bits
also make difficult to extend the flash operations.
This new patch only mentions write-protect being on or off, rather than
the actual mechanism.
4) Instead of touching generic code, it is possible to have
this functionality inside spinor operations in the form of
flash hooks or fixups for associated flash chips.
That sounds to me like what drivers are for. But we still need some sort
of API for it to be accessible.
Simon Glass [Mon, 15 Mar 2021 05:11:16 +0000 (18:11 +1300)]
bootstage: Warning if space is exhausted
At present bootstage silently ignores new records if it runs out of
space. It is sometimes obvious by looking at the report, but the IDs are
not contiguous, so it is easy to miss.
Simon Glass [Mon, 15 Mar 2021 05:11:12 +0000 (18:11 +1300)]
sandbox: image: Allow sandbox to load any image
Sandbox is special in that it is used for testing and it does not match
any particular target architecture. Allow it to load an image from any
architecture, so that 'bootm' can be used as needed.
Simon Glass [Mon, 15 Mar 2021 05:11:11 +0000 (18:11 +1300)]
sandbox: Provide a way to bind fixed/removeable devices
At present when a file is bound to a host device it is always marked as
removeable. Arguably the device is removeable, since it can be unbound at
will. However while it is bound, it is not considered removable by the
user. Also it is useful to be able to model both fixed and removeable
devices for code that distinguishes them.
Add a -r flag to the 'host bind' command and plumb it through to provide
this feature.
Simon Glass [Mon, 15 Mar 2021 05:11:09 +0000 (18:11 +1300)]
sandbox: Disintangle declarations in do_host_bind()
This function has a strange mix of declarations and argument parsing
which is a bit hard to follow and harder to modify. Separate out the
declarations at the start of the function and adjust the ordering of
the code slightly.
Simon Glass [Mon, 15 Mar 2021 05:11:07 +0000 (18:11 +1300)]
sandbox: Only delete the executable if requested
At present sandbox removes its executable after failing to run it,
since there is no other way that it would get cleaned up.
However, this is actually only wanted if the image was created within
sandbox. For the case where the image was generated by the build system,
such as u-boot-spl, we don't want to delete it.
Simon Glass [Mon, 15 Mar 2021 05:00:33 +0000 (18:00 +1300)]
x86: fsp: Don't notify if booted from coreboot
When booting from coreboot there is no need to notify the FSP of anything,
since coreboot has already done it. Nor it is possible, since the FSP
details are not provided by coreboot.
Simon Glass [Mon, 15 Mar 2021 05:00:32 +0000 (18:00 +1300)]
x86: coral: Fall back to coreboot video when FSP missing
When booting from coreboot the FSP video information is no-longer
available. Enable the coreboot driver so that we can get some sort of
display in this case.
Simon Glass [Mon, 15 Mar 2021 05:00:31 +0000 (18:00 +1300)]
x86: coral: Allow init of debug UART in U-Boot proper
At present the debug UART is only set up in SPL, on the assumption that
the boot flow will always pass through there. When booting from coreboot,
SPL is not used, so the debug UART is not available.
Move the code into a common place so that it can be used in U-Boot proper
also. Add the required init to start_from_spl.S as well.
Simon Glass [Mon, 15 Mar 2021 05:00:28 +0000 (18:00 +1300)]
x86: fsp: Don't enable FSP graphics if booted from coreboot
This driver cannot work when booted from coreboot, since the FSP
information is not available. Disable it in that case, so that the
coreboot video driver can be used instead.
Simon Glass [Mon, 15 Mar 2021 05:00:26 +0000 (18:00 +1300)]
video: Fix video on coreboot with the copy buffer
The copy buffer, if enabled, prevents booting from coreboot correctly,
since no memory is allocated for it. Allow it to fall back to disabled
in this situation. This ensures that a console is displayed, even if
it is slow.
Simon Glass [Mon, 15 Mar 2021 05:00:23 +0000 (18:00 +1300)]
x86: Allow installing an e820 when booting from coreboot
Move this code into a generic location so that it can be used by other x86
boards which want to boot from coreboot. Also ensure that this is called
if booting from coreboot.
Simon Glass [Mon, 15 Mar 2021 05:00:21 +0000 (18:00 +1300)]
x86: Move coreboot sysinfo parsing into generic x86 code
It is useful to be able to parse coreboot tables on any x86 build which is
booted from coreboot. Add a new Kconfig option to enable this feature and
move the code so it can be used on any board, if enabled.
Simon Glass [Mon, 15 Mar 2021 05:00:20 +0000 (18:00 +1300)]
x86: coreboot: Sync up timestamp codes
Add new timestamp codes that are present in coreboot, so that we can decode
these in U-Boot.
At present TS_U_BOOT_START_KERNEL is used twice. It should only be used
just before jumping to Linux, so update the other call site to use
TS_START_KERNEL.
Simon Glass [Mon, 15 Mar 2021 05:00:19 +0000 (18:00 +1300)]
x86: Move coreboot timestamp info into coreboot_tables.h
This all relates to the sysinfo structure provided by coreboot. Put the
timestamp definitions into the same file as the others. Tidy up a few
comments at the same time.
Simon Glass [Mon, 15 Mar 2021 05:00:18 +0000 (18:00 +1300)]
x86: Make coreboot sysinfo available to any x86 board
It is possible to boot U-Boot for chromebook_coral either 'bare metal' or
from coreboot. In the latter case we want to provide access to the coreboot
sysinfo tables. Move the definitions into a file available to any x86
board.
Simon Glass [Mon, 15 Mar 2021 05:00:16 +0000 (18:00 +1300)]
cbfs: Support reading compression information
CBFS now supports compressed filed. Add support for reading this
information so that the correct decompression can be applied. The
decompression itself is not implemented in CBFS.
Simon Glass [Mon, 15 Mar 2021 05:00:13 +0000 (18:00 +1300)]
cbfs: Allow file traversal with any CBFS
The file traversal functions currently use a single global CBFS. In some
cases we need to access multiple CBFSs to obtain different files. Add new
functions to support this.
Simon Glass [Mon, 15 Mar 2021 05:00:12 +0000 (18:00 +1300)]
cbfs: Allow access to CBFS without a header
In some cases CBFS does not start with a header but is just a collection
of files. It is possible to support this so long as the size of the CBFS
is provided.
Update the cbfs_init_mem() function to support this.
Simon Glass [Mon, 15 Mar 2021 05:00:11 +0000 (18:00 +1300)]
smbios: Allow writing to the coreboot version string
When U-Boot is booted from coreboot the SMBIOS tables are written by
coreboot, not U-Boot. The existing method of updating the BIOS version
string does not work in that case, since gd->smbios_version is only set
when U-Boot writes the tables.
Add a new function which allows the version to be updated by parsing the
tables and writing the string in the correct place. Since coreboot
provides a pointer to the SMBIOS tables in its sysinfo structure, this
makes it easy to do the update.
Simon Glass [Mon, 15 Mar 2021 05:00:06 +0000 (18:00 +1300)]
x86: coral: Update the SD card-detect GPIO
Since the recent bug fix, it doesn't matter which GPIO phandle is used so
long as the GPIO number is right. Still, we may as well use the correct
one to avoid confusion.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Simon Glass [Mon, 15 Mar 2021 05:00:04 +0000 (18:00 +1300)]
x86: Probe device if needed in intel_gpio_xlate()
The Intel GPIO binding allows GPIOs to be globally numbered, so that it
does not matter which GPIO bank is specified in the device tree. This is
convenient and avoid confusion since the banks do not have the same number
of GPIOs and the numbering is not sequential.
The GPIO uclass ensures that the device mentioned in the devicetree
binding is probed. It is fine for the driver to update gpio_desc to point
to a different driver, but this may not have been probed. If it has not
been, then it cannot be claimed since there is no uclass data.
We could handle this in the GPIO uclass but so far it is an unusual
situation so it is probably not worth the extra code. Handle this case in
the GPIO driver by probing the selected device if necessary.
Simon Glass [Mon, 15 Mar 2021 05:00:02 +0000 (18:00 +1300)]
x86: coral: Add information about building / running
Add detailed information on how to build the coral image, since it needs
binary blobs. Provide a way to avoid the memory-training delay. Also show
the console output from a sample run.
Tom Rini [Fri, 26 Mar 2021 16:15:26 +0000 (12:15 -0400)]
Merge tag 'dm-pull-26mar21-take2' of git://git.denx.de/u-boot-dm into next
dtoc support for of-platdata-inst
driver model support for of-platdata-inst
support of-platdata-inst on x86 / coral
binman support for exapanded entries
binman convert docs to reST
ti-sysc fix for duplicate uclass driver
patman minor improvements
pylibfdt build only if needed
correct obscure CI error with OF_PLATDATA_INST
Simon Glass [Thu, 18 Mar 2021 07:25:16 +0000 (20:25 +1300)]
binman: Drop repetitive heading for each entry
Many entries start 'Entry containing a'. This looks fine in the source
code but is annoying when viewed in the htmldocs table of contents. Drop
these unnecessary words.
Simon Glass [Thu, 18 Mar 2021 07:25:13 +0000 (20:25 +1300)]
binman: doc: Add documentation to htmldocs
Add a link to binman's documentation and adjust the files so that it is
accessible. Use the name README.rst so it is easy to discover when binman
is installed without U-Boot.
Simon Glass [Thu, 18 Mar 2021 07:25:09 +0000 (20:25 +1300)]
x86: Make use of binman expanded entries
We don't need to spell out the separate pieces of U-Boot phase binaries
anymore. Revert to using the simple entry and let binman do the expansion
itself as needed.
Simon Glass [Thu, 18 Mar 2021 07:25:08 +0000 (20:25 +1300)]
Makefile: Pass new entry args to binman
To support the use of 'expanded' entries, binman needs to be told whether
SPL and TPL have a devicetree and whether they need BSS padding. Add these
to the Makefile.
Simon Glass [Thu, 18 Mar 2021 07:25:06 +0000 (20:25 +1300)]
binman: Plumb expanded entries through fully
Add support for this feature in the control, image and section modules, so
that expanded entries will be selected by default. So far there are no
expanded entry types, so this is a nop.
projects / u-boot.git / log