Simon Glass [Mon, 18 Oct 2021 18:13:15 +0000 (12:13 -0600)]
binman: Allow timeout to occur in the image or its section
At present testThreadTimeout() assumes that the expected timeout happens
first when building the section, but it can just as easily happen at the
top-level image. Update the test to cope with both.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
Hannu Lounento [Mon, 18 Oct 2021 05:49:03 +0000 (08:49 +0300)]
image.h: make image_sign_info.fit point to const
The data blob apparently does not need to be modified through the fit
field of the image_sign_info struct so make it point to const to avoid
the need to cast away constness in functions that assign a pointer to
const data to the field.
fit_image_setup_verify already had to cast away constness as it assigned
a const void * argument to the field. The cast can now be removed.
Signed-off-by: Hannu Lounento <hannu.lounento@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
- Revert GIC LPI changes that need to be reworked.
- mvebu SATA booting bugfix
- Samsung Galaxy S9/S9+(SM-G96x0), Samsung Galaxy A and Apple M1
platform support.
board: samsung: add support for Galaxy A series of 2017 (a5y17lte)
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones.
U-boot can be used as chain-loaded bootloader to gain control
on booting vanilla linux(and possibly others) kernels
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone,
for China \ Hong Kong markets.
Has unlockable bootloader, unlike SM-G960U (American market version),
which allows running u-boot as a chain-loaded bootloader.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
Hi-end qualcomm chip, introduced in late 2017.
Mostly used in flagship phones and tablets of 2018.
Features:
- arm64 arch
- total of 8 Kryo 385 Gold / Silver cores
- Hexagon 685 DSP
- Adreno 630 GPU
Tested only as second-stage bootloader.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Stephan Gerhold <stephan@gerhold.net>
Allows to change clock frequency of debug uart,
thus supporting wide range of baudrates.
Enable / disable functionality is not implemented yet.
In most use cases of SDM845 (i.e. mobile phones and tablets)
it's not needed, because qualcomm first stage bootloader leaves it
initialized, and on the other hand there's no possibility to
replace signed first stage bootloader with u-boot.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
Generic Interface (GENI) Serial Engine (SE) based uart
can be found on newer qualcomm SOCs, starting from SDM845.
Tested on Samsung SM-G9600(starqltechn)
by chain-loading u-boot with stock bootloader.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
Mark Kettenis [Sat, 23 Oct 2021 14:58:06 +0000 (16:58 +0200)]
arm: dts: apple: Add preliminary device trees
Add preliminary device trees for the Apple M1 mini (2020) and
Apple M1 Macbook Pro 13" (2020). Device tree bindings for
the Apple M1 SoC are still being formalized and these device
trees will be synchronized with the Linux kernel as needed.
The device trees in this commit are based on the initial Apple
M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl,
pmgr, usb based on bindings on track for inclusion in Linux
5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and
watchdog that don't have a proposed binding yet.
These device trees are provided as a reference only as U-Boot
uses the device tree passed by the m1n1 bootloader.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Mark Kettenis [Sat, 23 Oct 2021 14:58:05 +0000 (16:58 +0200)]
iommu: Add Apple DART driver
The DART is an IOMMU that is used on Apple's M1 SoC. This driver
configures the DART such that it operates in bypass mode which is
enough to support DMA for the USB3 ports integrated on the SoC.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Mark Kettenis [Sat, 23 Oct 2021 14:58:03 +0000 (16:58 +0200)]
arm: apple: Add initial support for Apple's M1 SoC
Add support for Apple's M1 SoC that is used in "Apple Silicon"
Macs. This builds a basic U-Boot that can be used as a payload
for the m1n1 boot loader being developed by the Asahi Linux
project.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Add MAINTAINERS entry]
Mark Kettenis [Sat, 23 Oct 2021 14:58:01 +0000 (16:58 +0200)]
iommu: Add IOMMU uclass
This uclass is intended to manage IOMMUs on systems where the
IOMMUs are not in bypass mode by default. In that case U-Boot
cannot ignore the IOMMUs if it wants to use devices that need
to do DMA and sit behind such an IOMMU.
This initial IOMMU uclass implementation does not implement and
device ops and is intended for IOMMUs that have a bypass mode
that does not require address translation. Support for IOMMUs
that do require address translation is planned and device ops
will be defined when support for such IOMMUs will be added.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michael Walle <michael@walle.cc>
[trini: Also make board/broadcom/bcmns3/ns3.c fail clearly now] Signed-off-by: Tom Rini <trini@konsulko.com>
Ad-hoc bindings that are not part of the upstream device tree / bindings
are not allowed in-tree. Only bindings that are in-progress with
upstream and then re-synced once agreed upon are.
Usama Arif [Tue, 19 Oct 2021 14:49:48 +0000 (15:49 +0100)]
mmc: arm_pl180_mmci: Enable HWFC for specific versions of MCI
There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI.
For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control
needs to be enabled for multi block writes (MMC CMD 18).
Marek Vasut [Wed, 15 Sep 2021 09:43:13 +0000 (11:43 +0200)]
cmd: mmc: Support mmc hwpartition user enh start -
Add option to extend the hardware partition to the maximum size by
using the '-' dash sign instead of $cnt parameter. This is useful
in case we want to switch the entire eMMC user area into pSLC mode,
especially in case the device may be populated with different size
eMMCs. With this change, we do not have to calculate the number of
blocks of the user area manually.
To switch the pSLC mode for user area, use e.g. the following.
WARNING: This is a one-time irreversible change.
=> mmc hwpartition user enh 0 - wrrel on complete
Stephen Carlson [Tue, 17 Aug 2021 19:46:41 +0000 (12:46 -0700)]
drivers: mmc: Add wait_dat0 support for sdhci driver
Adds an implementation of the wait_dat0 MMC operation for the DM SDHCI
driver, allowing the driver to continue when the card is ready rather
than waiting for the worst case time on each MMC switch operation.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Stephen Carlson [Tue, 17 Aug 2021 19:46:40 +0000 (12:46 -0700)]
drivers: mmc: Add wait_dat0 support for Freescale eSDHC driver
Adds an implementation of the wait_dat0 MMC operation for the Freescale
eSHDC driver, allowing the driver to continue when the card is ready
rather than waiting for the worst case time on each MMC switch operation.
- mvebu: Fix usage of BIN header arguments (Pali)
- mvebu: turris_omnia: Fix MTD partitions order for Linux (Pali)
- mvebu: nandpagesize support for kwbimage v1 (Pali)
Pali Rohár [Fri, 22 Oct 2021 10:37:46 +0000 (12:37 +0200)]
tools: kwbimage: Add support for NAND_PAGE_SIZE command also for v1 images
The NAND_PAGE_SIZE command is already supported by mkimage for v0 images,
but not for v1 images.
A38x and A39x BootROM supports reading NAND flash page size from v1 image
in the same way as Kirkwood BootROM from v0 image. It it documented in A38x
and A39x Functional Specification.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 21 Oct 2021 14:46:09 +0000 (16:46 +0200)]
arm: mvebu: Remove dummy BIN header arguments for SPL binary
U-Boot SPL binary does not read BIN header arguments, so passing some dummy
values 0000005b and 00000068 has no effect for U-Boot SPL code.
Probably these two values comes from old Marvell DDR training code which
was separated from U-Boot and used it for some configuration.
Seems that two 32-bit values were specified here to ensure SPL code
alignment to 128-bit boundary as it is required e.g. for A370 or AXP
processors. Main kwbimage header is 64-byte long which is aligned to
128-bit boundary. Optional kwbheader is 32-bit long, number of BIN header
arguments is stored in 32-bit number. So for alignment to 128-bit boundary
is needed 64-bit padding which exactly these two 32-bit dummy arguments
provided.
Now when mkimage correctly aligns start of executable code in BIN header to
128-bit boundary, there is no requirement to put dummy argument values into
kwbimage. So remove them.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 21 Oct 2021 14:46:07 +0000 (16:46 +0200)]
tools: kwbimage: Align BIN header executable code to 128-bit boundary
ARM executable code inside the BIN header on some mvebu platforms
(e.g. A370, AXP) must always be aligned with the 128-bit boundary. This
requirement can be met by inserting dummy arguments into BIN header.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 21 Oct 2021 14:46:06 +0000 (16:46 +0200)]
tools: kwboot: Align UART baudrate change code in BIN header to 128-bit boundary
ARM executable code inside the BIN header on some mvebu platforms
(e.g. A370, AXP) must always be aligned with the 128-bit boundary. This
requirement can be met by inserting dummy arguments into BIN header.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Ilias Apalodimas [Tue, 26 Oct 2021 06:12:33 +0000 (09:12 +0300)]
sandbox: Remove OF_HOSTFILE
OF_HOSTFILE is used on sandbox configs only. Although it's pretty
unique and not causing any confusions, we are better of having simpler
config options for the DTB.
So let's replace that with the existing OF_BOARD. U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Fri, 22 Oct 2021 15:05:47 +0000 (17:05 +0200)]
lib: uuid: fix the test on RNG device presence
Correct the test on RNG device presence,when ret is equal to 0,
before to call dm_rng_read function.
Without this patch the RNG device is not used when present (when ret == 0)
or a data abort occurs in dm_rng_read when CONFIG_DM_RNG is activated but
the RNG device is not present in device tree (ret != 0 and devp = NULL).
Fixes: 92fdad28cfdf ("lib: uuid: use RNG device if present") CC: Matthias Brugger <mbrugger@suse.com> CC: Torsten Duwe <duwe@suse.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
cmd: nand biterr - Add support for nand biterr command
The command shall be used to induce bit errors in the nand page
manually. The code flips a bit in the specified offset without
changing the ECC. This helps to see how the software handles the
error.
The patch is ported from
https://patchwork.ozlabs.org/project/uboot/patch/\ 1325691123-19565-1-git-send-email-holger.brunck@keymile.com
The implementation is inspired from
'mtd-utils/nand-utils/nandflipbits.c'
Masahisa Kojima [Tue, 26 Oct 2021 08:27:24 +0000 (17:27 +0900)]
efi_loader: add SMBIOS table measurement
TCG PC Client Platform Firmware Profile Specification
requires to measure the SMBIOS table that contains static
configuration information (e.g. Platform Manufacturer
Enterprise Number assigned by IANA, platform model number,
Vendor and Device IDs for each SMBIOS table).
The device- and environment-dependent information such as
serial number is cleared to zero or space character for
the measurement.
Existing smbios_string() function returns pointer to the string
with const qualifier, but exisintg use case is updating version
string and const qualifier must be removed.
This commit removes const qualifier from smbios_string()
return value and reuses to clear the strings for the measurement.
This commit also fixes the following compiler warning:
lib/smbios-parser.c:59:39: warning: cast to pointer from integer of
different size [-Wint-to-pointer-cast]
const struct smbios_header *header = (struct smbios_header *)entry->struct_table_address;
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Ricardo Salveti [Wed, 20 Oct 2021 12:12:06 +0000 (15:12 +0300)]
arm: spl: prepare for jumping to OPTEE
Make sure to (if applicable) flush the D-cache, invalidate I-cache,
and disable MMU and caches before jumping to OPTEE.
This fixes the SDP->SPL->OPTEE boot flow on iMX6Q and most likely on
some other ARM SoCs.
efi_loader: function to get GUID for variable name
In multiple places we need the default GUID matching a variable name.
The patch provides a library function. For secure boot related variables
like 'PK', 'KEK', 'db' a lookup table is used. For all other variable
names EFI_GLOBAL_VARIABLE is returned.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
UEFI variable names are typically constants and hence should be defined as
const. Unfortunately some of our API functions do not define the parameters
for UEFI variable names as const. This requires unnecessary conversions.
Adjust parameters of several internal functions to tre UEFI variable names
as const.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
AKASHI Takahiro [Thu, 7 Oct 2021 06:23:32 +0000 (15:23 +0900)]
efi_loader: capsule: add back efi_get_public_key_data()
The commit 47a25e81d35c ("Revert "efi_capsule: Move signature from DTB to
.rodata"") failed to revert the removal of efi_get_public_key_data().
Add back this function and move it under lib/efi_loader so that other
platforms can utilize it. It is now declared as a weak function so that
it can be replaced with a platform-specific implementation.
Fixes: 47a25e81d35c ("Revert "efi_capsule: Move signature from DTB to
.rodata"") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This reverts commit a7e4f905d206d5895dab4bd38a8316e4f2fe15fe.
The description originally written by Sughosh is still valid
even after the commit 47a25e81d35c ("Revert "efi_capsule: Move signature
from DTB to .rodata"") was applied.
AKASHI Takahiro [Thu, 7 Oct 2021 06:23:30 +0000 (15:23 +0900)]
Revert "Revert "mkeficapsule: Remove dtb related options""
This reverts commit d428e81266a59974ade74c1ba019af39f23304ab.
We have agreed with removing dtb-related stuff from mkeficapsule
command even if the commit 47a25e81d35c ("Revert "efi_capsule: Move
signature from DTB to .rodata"") was applied.
Masahisa Kojima [Fri, 22 Oct 2021 11:24:24 +0000 (20:24 +0900)]
efi_loader: add missing const qualifier
This commit fixes the following compilation warning
of boottime->install_configuration_table() function.
lib/efi_selftest/efi_selftest_tcg2.c:475:46:
warning: passing argument 1 of ‘boottime->install_configuration_table’
discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
ret = boottime->install_configuration_table(&smbios_guid, dmi);
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Thomas Huth [Mon, 25 Oct 2021 06:56:14 +0000 (08:56 +0200)]
doc: Remove the obsolete README.mpc74xx file
Support for the PPC74xx processors has been removed in commit d928664f41 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support")
more than 6 years ago already. So the corresponding README file
can now be removed, too.
Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Marek Vasut [Sun, 17 Oct 2021 17:23:36 +0000 (19:23 +0200)]
env: mmc: Add support for redundant env in both eMMC boot partitions
Currently the MMC environment driver supports storing redundant environment
only in one eMMC partition at different offsets. This is sub-optimal, since
if this one boot partition is erased, both copies of environment are lost.
Since the eMMC has two boot partitions, add support for storing one copy of
environment in each of the two boot partitions.
To enable this functionality, select CONFIG_SYS_REDUNDAND_ENVIRONMENT to
indicate redundant environment should be used. Set CONFIG_SYS_MMC_ENV_PART
to 1 to indicate environment should be stored in eMMC boot partition. Set
CONFIG_ENV_OFFSET equal to CONFIG_ENV_OFFSET_REDUND, and both to the offset
from start of eMMC boot partition where the environment should be located.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Sun, 10 Oct 2021 21:52:41 +0000 (23:52 +0200)]
loads: Block writes into LMB reserved areas of U-Boot
The loads srec loading may overwrite piece of U-Boot accidentally.
Prevent that by using LMB to detect whether upcoming write would
overwrite piece of reserved U-Boot code, and if that is the case,
abort the srec loading.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Wed, 6 Oct 2021 16:29:53 +0000 (18:29 +0200)]
env: mmc: Add missing eMMC bootpart restoration to env erase
If the environment is stored in eMMC hardware boot partition, the environment
driver first stores the currently selected eMMC boot partition, then does the
requested operation, and then restores the original boot partition settings.
In case the environment operation fails, the boot partition settings are also
restored.
The 'env erase' implementation in the MMC environment driver lacks the path
which restores the boot partition. This could lead to various failure modes,
like the system boots the wrong copy of bootloader etc. Fix this by filling
in the missing restoration path.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
Tom Rini [Mon, 25 Oct 2021 16:09:57 +0000 (12:09 -0400)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
- Add and enable watchdog driver
- Prepare for SYSRESET driven AXP poweroff
- Prepare for SoCs without MMC2
- Some fixes for extending SPL (SPL-DM for RISC-V)
- Some preparations for proper VBUS management
- Fix secure monitor move
Samuel Holland [Sun, 22 Aug 2021 18:53:29 +0000 (13:53 -0500)]
sunxi: dts: H616: Enable the watchdog
For some reason, the watchdog was disabled in the H616 device tree. Most
likely this is a copy-paste from the H6 device tree: the H6 watchdog is
disabled because it is broken in some chips. However, there is no
evidence of issues with the H616 watchdog.
Enable the watchdog node so it can be used by the driver.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sun, 22 Aug 2021 18:53:28 +0000 (13:53 -0500)]
sunxi: Enable watchdog timer support by default
A watchdog helps recover from hangs or failure to boot an OS. It can
also be used by the sysreset framework to intentionally reset the
system. Now that a driver is available, let's enable this functionality
on sunxi boards.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sat, 11 Sep 2021 19:45:31 +0000 (14:45 -0500)]
clk: sunxi: Extend DM_RESET selection to SPL
The sunxi clock driver exposes a reset controller, so it selects the
reset controller framework. Ensure that dependency is also satisfied
when building the driver for the SPL.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Mon, 5 Jul 2021 23:04:43 +0000 (00:04 +0100)]
sunxi: SPL SPI: Allow larger SPL
The more recent Allwinner SoCs BootROMs can actually load SPL images
larger than 32KB. We use this on the H616 to fit the extra code needed
for the PMIC into the image, and have provisions in board.c to respect
that larger SPL size when booting from MMC.
However the sunxi SPL SPI loader has a hardcoded load offset of 32KB,
which will fail on the H616.
To fix this, use the same algorithm we use for MMC: if the SPL size is
smaller than 32KB, we use 32KB, otherwise we expect the U-Boot payload
directly after the SPL code.
This prepares for SPI booting with larger SPLs like on the H616.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Samuel Holland [Mon, 25 Oct 2021 02:00:10 +0000 (21:00 -0500)]
power: pmic: axp: Implement poweroff via sysreset
The AXP PMICs have the ability to power off the system. The existing
code for this is duplicated for each PMIC variant, and uses the legacy
non-DM "pmic_bus" interface. When SYSRESET is enabled, this can all be
replaced with a sysreset device using the DM_PMIC interface.
Since the trigger bit is the same on all PMIC variants, use the register
definitions from the oldest supported PMIC.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sun, 22 Aug 2021 23:18:05 +0000 (18:18 -0500)]
power: axp: Avoid do_poweroff conflict with sysreset
The sysreset uclass has an option to provide the do_poweroff() function.
When that option is enabled, the AXP power drivers should not provide
their own definition.
For the AXP305, which is paired with 64-bit systems where TF-A provides
PSCI, there is another possible conflict with the PSCI firmware driver.
This driver can be enabled even if CONFIG_PSCI_RESET is disabled, so
make sure to use the right symbol in the condition.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sun, 22 Aug 2021 23:18:04 +0000 (18:18 -0500)]
include: axp_pmic: Include headers for all variants
A single DM-based driver should be able to support some feature for
several PMIC variants where the interface is the same. For example,
all PMIC variants use the same register bit to trigger poweroff.
However, currently only definitions for a single PMIC are available at
a time. This requires drivers to use #ifdefs and different indentifiers
for each variant they support.
Let's simplify this by making register definitions for all variants
available from the header. Then no preprocessor conditions are needed;
the driver can use the register definition from any variant that
supports the relevant feature.
An exception is the GPIO-related definitions, which do not use unique
identifiers. So for now, keep them like before. They will be cleaned up
along with the GPIO driver.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This header attempted to avoid multiple inclusion using a header guard.
But the preprocessor symbol was never defined, so the guard had no
effect. Fix this by defining the symbol.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Wed, 13 Oct 2021 00:35:41 +0000 (19:35 -0500)]
tools: mksunxiboot: Use sunxi_image header directly
When adding eGON support to mkimage, the struct boot_file_head
definition was moved to its own header. This is the only thing
mksunxiboot needed out of asm/arch/spl.h. Clean up the relative
include by switching to new header.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Tue, 12 Oct 2021 23:54:56 +0000 (18:54 -0500)]
sunxi: A23/A33/H3: Actually move the secure monitor
commit 1ebfc0c631e3 ("sunxi: A23/A33/H3: Move sun8i secure monitor to
SRAM A2") attempted to move the secure monitor to SRAM A2. But not all
sun8i SoCs have SRAM A2, so a check was put in for SUNXI_SRAM_A2_SIZE to
avoid breaking the other SoCs.
However, because the header providing SUNXI_SRAM_A2_SIZE was not
included, this unintentionally skipped the new definitions on all SoCs.
Fix this by including the right header.
Fixes: 1ebfc0c631e3 ("sunxi: A23/A33/H3: Move sun8i secure monitor to SRAM A2") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sun, 12 Sep 2021 14:22:42 +0000 (09:22 -0500)]
phy: sun4i-usb: Support VBUS detection via power supply
The device tree binding provides for getting VBUS state from a device
referenced by phandle, as an optional alternative to using a GPIO. In
U-Boot, where there is no power supply class, this VBUS detection will
be implemented using a regulator device and its get_enable method.
Let's hook this up to the PHY driver.
Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sun, 12 Sep 2021 14:22:41 +0000 (09:22 -0500)]
phy: sun4i-usb: Refactor VBUS detection to match Linux
The Linux driver checks the VBUS detection GPIO first; then VBUS power
supply; then finally assumes VBUS is present. When adding VBUS power
supply support, we want to match that order, so we get the same behavior
in case both a GPIO and a power supply are provided in the device tree.
So refactor the function a bit to remove the early return, and use the
same "assume VBUS is present" final fallback.
Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sun, 12 Sep 2021 14:22:40 +0000 (09:22 -0500)]
phy: sun4i-usb: Remove a couple of debug messages
Both of these messages log the GPIO number of the ID detection GPIO,
which is not terribly useful, especially in the VBUS detection function.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sun, 22 Aug 2021 18:23:53 +0000 (13:23 -0500)]
sunxi: Select SPL_SEPARATE_BSS
sunxi-common.h defines CONFIG_SPL_BSS_START_ADDR to put SPL's BSS in
DRAM. Due to this, we must select SPL_SEPARATE_BSS, or else SPL will
attempt to load its DTB from the wrong address (after BSS in DRAM).
This change fixes booting with SPL_OF_CONTROL=y.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Kuldeep Singh [Tue, 3 Aug 2021 09:02:58 +0000 (14:32 +0530)]
spi: nxp_fspi: Implement errata workaround for LS1028A
Errata ERR050568 description says that "Flash access by FlexSPI AHB
command may not work with platform frequency equal to 300 MHz" on
LS1028A.
By default, smaller length reads(equal to RX FIFO size) are done by IP
bus and larger length reads using AHB bus. For adding errata workaround,
use IP bus to read entire flash contents and disable AHB path when
platform frequency is 300Mhz.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Kuldeep Singh [Tue, 3 Aug 2021 09:02:57 +0000 (14:32 +0530)]
spi: nxp-fspi: Add support for IP read only
Add support for disabling AHB bus and read entire flash contents via IP
bus only. Please note, this enables IP bus read using a quirk which can
be enabled directly in device-type data or in existence of an errata
where AHB bus may need to be disabled.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Marek Behún [Tue, 5 Oct 2021 13:56:06 +0000 (15:56 +0200)]
mtd: Remove mtd_erase_callback() entirely
The original purpose of mtd_erase_callback() in Linux at the time it was
imported to U-Boot, was to inform the caller that erasing is done (since
it was an asynchronous operation).
All supplied callback methods in U-Boot do nothing, but the
mtd_erase_callback() function was (until previous patch) grossly abused
in U-Boot's mtdpart implementation for completely different purpose.
Since we got rid of the abusement, remove the mtd_erase_callback()
function and the .callback member from struct erase_info entirely, in
order to avoid such problems in the future.
Marek Behún [Tue, 5 Oct 2021 13:56:05 +0000 (15:56 +0200)]
mtd: mtdpart: Make mtdpart's _erase method sane
The _erase() method of the mtdpart driver, part_erase(), currently
implements offset shifting (for given mtdpart partition) in a weird way:
1. part_erase() adds partition offset to block address
2. parent driver's _erase() method is called
3. parent driver's _erase() method calls mtd_erase_callback()
4. mtd_erase_callback() subtracts partition offset from block address
so that the callback function is given correct address
The problem here is that if the parent's driver does not call
mtd_erase_callback() in some scenario (this was recently a case for
spi_nor_erase(), which did not call mtd_erase_callback() at all), the
offset is not shifted back.
Moreover the code would be more readable if part_erase() not only added
partition offset before calling parent's _erase(), but also subtracted
it back afterwards. Currently the mtd_erase_callback() is expected to do
this subtracting since it does have to do it anyway.
Add the more steps to this procedure:
5. mtd_erase_callback() adds partition offset to block address so that
it returns the the erase_info structure members as it received them
6. part_erase() subtracts partition offset from block address
This makes the code more logical and also prevents errors in case
parent's driver does not call mtd_erase_callback() for some reason.
(BTW, the purpose of mtd_erase_callback() in Linux is to inform the
caller that it is done, since in Linux erasing is done asynchronously.
We are abusing the purpose of mtd_erase_callback() in U-Boot for
completely different purpose. The callback function itself has empty
implementation in all cases in U-Boot.)
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Marek Behún [Tue, 5 Oct 2021 13:56:03 +0000 (15:56 +0200)]
mtd: spi-nor-core: Call mtd_erase_callback() from spi_nor_erase()
The spi_nor_erase() function does not call mtd_erase_callback() as it
should.
The mtdpart code currently implements the subtraction of partition
offset in mtd_erase_callback().
This results in partition offset being added prior calling
spi_nor_erase(), but not subtracted back on return. The result is that
the `mtd erase` command does not erase the whole partition, only some of
it's blocks:
=> mtd erase "Rescue system"
Erasing 0x00000000 ... 0x006fffff (1792 eraseblock(s))
jedec_spi_nor spi-nor@0: at 0x100000, len 4096
jedec_spi_nor spi-nor@0: at 0x201000, len 4096
jedec_spi_nor spi-nor@0: at 0x302000, len 4096
jedec_spi_nor spi-nor@0: at 0x403000, len 4096
jedec_spi_nor spi-nor@0: at 0x504000, len 4096
jedec_spi_nor spi-nor@0: at 0x605000, len 4096
jedec_spi_nor spi-nor@0: at 0x706000, len 4096
This is obviously wrong.
Add proper calling of mtd_erase_callback() into the spi_nor_erase()
function.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org> Reported-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Marek Behún [Tue, 5 Oct 2021 13:56:02 +0000 (15:56 +0200)]
mtd: spi-nor-core: Don't check for zero length in spi_nor_write() / spi_nor_erase()
This check is already done in all callers: mtdcore's mtd_write() /
mtd_erase(), legacy spi_nor_write() / spi_flash_erase(). No reason to do
this here as well.
projects / u-boot.git / log