Patrick Wildt [Mon, 14 Oct 2019 11:19:00 +0000 (13:19 +0200)]
imx: update i.MX8MQ device trees
This updates the i.MX8MQ device trees and, necessarily, also the
i.MX8MQ clock bindings. These are taken verbatim from from the
Linux kernel version v5.4-rc2, which three small changes which
were already part of the previous device tree:
* Keep the PSCI reserved memory range
* Keep the alias for ethernet, so that the MAC address can be set
* Keep the modified #include for the IOMUXC pins
Signed-off-by: Patrick Wildt <patrick@blueri.se> Acked-by: Peng Fan <peng.fan@nxp.com>
Lukasz Majewski [Tue, 15 Oct 2019 08:28:45 +0000 (10:28 +0200)]
spl: nor: Provide falcon boot support for NOR memories
This commit adds falcon boot support (by also copying args necessary for
booting) to the SPL NOR memory driver.
After this change it is possible to use the falcon boot in the same way
as on NAND memories. The necessary configs (i.e. CONFIG_CMD_SPL_NOR_OFS)
are now defined in Kconfig.
Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
Lukasz Majewski [Tue, 15 Oct 2019 08:28:44 +0000 (10:28 +0200)]
ARM: imx: Decouple mccmon6's SPL and u-boot proper code
The mccmon6 has been used a "mixed" approach between SPL and
U-Boot proper sources.
This commit decoupes SPL and u-boot proper, which allows clear
distinction between those two code bases and facilitates
conversion to DM/DTS on this particular board.
Robert Hancock [Tue, 6 Aug 2019 17:05:30 +0000 (11:05 -0600)]
watchdog: imx: Use immediate reset bits for expire_now
The expire_now function was previously setting the watchdog timeout to
minimum and waiting for the watchdog to expire. However, this watchdog
also has bits to trigger immediate reset. Use those instead, like the
Linux imx2_wdt driver does.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Robert Hancock [Tue, 6 Aug 2019 17:05:29 +0000 (11:05 -0600)]
watchdog: imx: Add DT ext-reset handling
The Linux imx2_wdt driver uses a fsl,ext-reset-output boolean in the
device tree to specify whether the board design should use the external
reset instead of the internal reset. Use this boolean to determine which
mode to use rather than using external reset unconditionally.
For the legacy non-DM mode, the external reset is always used in order
to maintain the previous behavior.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Marek Vasut [Tue, 15 Oct 2019 16:26:57 +0000 (18:26 +0200)]
arm: mxs: Increase VDDD voltage to match specification
According to IMX28CEC rev. 4, 10/2018, Table 15. Recommended Operating
Conditions, page 16, the VDDD should be set to 1.55V when the CPU is
operating at 454MHz. This is the case in U-Boot, hence increase the
VDDD voltage. This fixes instability when performing TFTP transfers.
Increase the brownout threshold to 1.4V. The documentation recommends
1.45V setting for the brownout, however, this triggers failure during
power block init, so keep the brownout slightly lower.
Claudius Heine [Tue, 29 Oct 2019 12:08:43 +0000 (13:08 +0100)]
ARM: imx: Fix bmode detection from grp10
imx6_is_bmode_from_gpr9 always returns false, because
IMX6_SRC_GPR10_BMODE is 1<<28 and gets casted to u8 on return.
This moves the function body into imx6_src_get_boot_mode, since that is the
only one using it and it is on the same abstraction level (accessing
registers directly).
Lukasz Majewski [Mon, 14 Oct 2019 15:43:34 +0000 (17:43 +0200)]
imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT on display5
After the following commit:
commit 772b55723bcb ("imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC
boot on falcon mode")
it is possible to set the CONFIG_SPL_FORCE_MMC_BOOT flag, which allows
using MMC device as boot device regardless of the device used by Boot ROM
(FBL) as the first boot medium.
Display5 board needs this flag set to allow falcon boot from eMMC device.
Tom Rini [Fri, 1 Nov 2019 17:59:14 +0000 (13:59 -0400)]
azure: Update the script to prepend PATH not override PATH
Similar to 90d3d78a1c68 ("gitlab-ci: Prepend to PATH rather than replace
it") we need to prepend the PATH with our additional binaries and not
replace the value fully as doing so breaks virtualenv.
Sam Protsenko [Mon, 21 Oct 2019 10:55:16 +0000 (13:55 +0300)]
cmd: avb: Support A/B slots
Add optional parameter to 'avb verify' sub-command, so that user is able
to specify which slot to use, in case when user's partitions are
slotted. If that parameter is omitted, the behavior of 'avb verify' will
be the same as before, so user API is content.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com> Acked-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Sam Protsenko [Thu, 15 Aug 2019 17:49:47 +0000 (20:49 +0300)]
cmd: avb: Fix requested partitions list
The requested_partitions[] array should contain only boot partitions.
Usually it's only 'boot' partition, as can be seen in [1]. Also, seems
like the requested_partitions[] are only used when there is no 'vbmeta'
partition [2], which is not a regular use-case.
Make requested_partitions[] contain only 'boot' partition as it was
supposed to be, and also make that array to be a local in
do_avb_verify_part() function, as nobody else needs that.
Sam Protsenko [Thu, 15 Aug 2019 20:04:03 +0000 (23:04 +0300)]
libavb: Fix build warnings after updating the lib
After updating libavb to most recent version from AOSP/master, two new
warnings appear:
Warning #1:
lib/libavb/avb_cmdline.c: In function 'avb_append_options':
lib/libavb/avb_cmdline.c:365:15: warning: 'dm_verity_mode' may be
used uninitialized in this function
[-Wmaybe-uninitialized]
new_ret = avb_replace(
^~~~~~~~~~~~
slot_data->cmdline, "$(ANDROID_VERITY_MODE)", dm_verity_mode);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/libavb/avb_cmdline.c:374:8: warning: 'verity_mode' may be used
uninitialized in this function
[-Wmaybe-uninitialized]
if (!cmdline_append_option(
^~~~~~~~~~~~~~~~~~~~~~
slot_data, "androidboot.veritymode", verity_mode)) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Warning #2:
lib/libavb/avb_slot_verify.c: In function 'avb_slot_verify':
lib/libavb/avb_slot_verify.c:1349:23: warning: 'ret' may be used
uninitialized in this function
[-Wmaybe-uninitialized]
AvbSlotVerifyResult ret;
^~~
Fix those by providing default return values to affected functions.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Sam Protsenko [Thu, 15 Aug 2019 20:04:02 +0000 (23:04 +0300)]
libavb: Update libavb to current AOSP master
Update libavb to commit 5fbb42a189aa in AOSP/master, because new version
has support for super partition [1], which we need for implementing
Android dynamic partitions. All changes from previous patches for libavb
in U-Boot are accounted for in this commit:
- commit ecc6f6bea6a2 ("libavb: Handle wrong hashtree_error_mode in
avb_append_options()")
- commit 897a1d947e7e ("libavb: Update SPDX tag style")
- commit d8f9d2af96b3 ("avb2.0: add Android Verified Boot 2.0 library")
Tested on X15:
## Android Verified Boot 2.0 version 1.1.0
read_is_device_unlocked not supported yet
read_rollback_index not supported yet
read_is_device_unlocked not supported yet
Verification passed successfully
AVB verification OK.
Michal Sojka [Fri, 13 Sep 2019 10:43:12 +0000 (12:43 +0200)]
mkimage: Set correct FDT type and ramdisk architecture in FIT auto mode
When running the following command
mkimage -f auto -A arm -O linux -T kernel -C none -a 0x8000 -e 0x8000 \
-d zImage -b zynq-microzed.dtb -i initramfs.cpio image.ub
the type of fdt subimage is the same as of the main kernel image and
the architecture of the initramfs image is not set. Such an image is
refused by U-Boot when booting. This commits sets the mentioned
attributes, allowing to use the "-f auto" mode in this case instead of
writing full .its file.
Following is the diff of mkimage output without and with this commit:
Simon South [Wed, 2 Oct 2019 14:55:07 +0000 (10:55 -0400)]
tiny-printf: Support vsnprintf()
Add a simple implementation of this function, to allow logging to be
enabled in the SPL or TPL for systems that rely on the tiny printf()
implementation.
To keep the code size small,
- The function is built only when logging is enabled, as it
(currently) is not needed otherwise; and
- Like the existing implementation of snprintf(), its buffer-size
parameter is ignored.
The signature 0x55 0xAA in bytes 510 and 511 of the first sector can either
indicate a DOS partition table of the first sector of a FAT file system.
The current code tries to check if the partition table is valid by looking
at the boot indicator of the partition entries. But first of all it does
not count from 0 to 3 but only from 0 to 2. And second it misses to
increment the pointer for the partition entry.
If it is a FAT file system can be discovered by looking for the text 'FAT'
at offset 0x36 or 'FAT32' at offset 0x52. In a DOS PBR there are no
partition entries, so those bytes are undefined. Don't require the byte at
offset 0x1BE to differ from 0x00 and 0x80.
With the patch the logic is changed as follows:
If the partition table has either an invalid boot flag for any partition or
has no partition at all, check if the first sector is a DOS PBR by looking
at the FAT* signature.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Marek Vasut [Tue, 15 Oct 2019 20:43:41 +0000 (22:43 +0200)]
lib: time: Add microsecond timer
Add get_timer_us(), which is useful e.g. when we need higher
precision timestamps.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org>
[trini: Fixup arch/arm/mach-bcm283x/include/mach/timer.h] Signed-off-by: Tom Rini <trini@konsulko.com>
Patrick Wildt [Wed, 16 Oct 2019 06:42:04 +0000 (08:42 +0200)]
nvme: use page-aligned buffer for identify command
Change the stack-allocated buffer for the identification command
to explicitly allocate page-aligned buffers. Even though the spec
seems to allow having admin queue commands on non page-aligned
buffers, it seems to not be possible on my i.MX8MQ board with a
a Silicon Power P34A80. Since all of the NVMe drivers I have seen
always do admin commands on a page-aligned buffer, which does work
on my system, it makes sense for us to do that as well.
Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Patrick Wildt [Wed, 16 Oct 2019 21:22:50 +0000 (23:22 +0200)]
nvme: flush dcache on both r/w, and the prp list
It's possible that the data cache for the buffer still holds data
to be flushed to memory, since the buffer was probably used as stack
before. Thus we need to make sure to flush it also on reads, since
it's possible that the cache is automatically flused to memory after
the NVMe DMA transfer happened, thus overwriting the NVMe transfer's
data. Also add a missing dcache flush for the prp list.
Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Walter Lozano [Tue, 22 Oct 2019 14:50:19 +0000 (11:50 -0300)]
dts: Kconfig: Fix help for SPL_OF_CONTROL
As initially this feature was implemented as a negative CONFIG and
later it was redesigned to be positive the help text should be
updated to reflect this change.
This commit updates the help text to match the current implementation.
Signed-off-by: Walter Lozano <wlozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 23 Oct 2019 19:39:41 +0000 (15:39 -0400)]
Makefile: Fix printing problem in size_check on overflow
When we have an excess size growth, fix the "limit" printf call to pass
in just the limit variable rather than the string bytes to the format
character.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Keerthy [Thu, 24 Oct 2019 08:22:28 +0000 (13:52 +0530)]
gpio: da8xx_gpio: Fix the _gpio_direction_output function
_gpio_direction_output function currently calls gpio_set_value
with the wrong gpio number. gpio_set_value in the uclass driver
expects a different gpio number and the _gpio_direction_output
is currently providing the number specific to the bank.
Hence fix it by calling the _gpio_set_value function instead.
Reported-by: Faiz Abbas <faiz_abbas@ti.com> Fixes: 8e51c0f254 ("dm: gpio: Add DM compatibility to GPIO driver for Davinci") Signed-off-by: Keerthy <j-keerthy@ti.com>
Tom Rini [Thu, 24 Oct 2019 15:59:28 +0000 (11:59 -0400)]
test/py: Use raw strings more to avoid deprecation warnings
We have two further uses of raw string usage in the test/py codebase
that are used under CI. The first of which is under the bind test and
is a direct update. The second of which is to strip VT100 codes from
the match buffer. While switching this to a raw string is also a direct
update, the comment it notes that problems were encountered on Ubuntu
14.04 (and whatever Python 2 version that was) that required slight
tweaks to the regex. Replace that now that we're saying Python 3.5 is
the minimum.
Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:27 +0000 (11:59 -0400)]
gitlab/travis: Rework how and when we use virtualenv in order to use python3
As things stand today, we have tools that CI requires where "python"
must be "python2". We need to use a virtualenv and pip in order to
ensure that our pytest tests can be run. Rework things slightly so
that:
- On Travis-CI, we install python-pyelftools for the platforms that
require pyelftools to be installed.
- On GitLab-CI, we move to a newer base image that includes python3-pip
and continue to use a virtualenv per job that needs it, for the
correct set of packages.
Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:26 +0000 (11:59 -0400)]
test/py: Update docs, add requirements.txt for pip
To be more closely aligned with Python community best practices, we need
to better document our usage of pip and make use of a requirements.txt
file that shows the versions of the tools that we are using. This will
aide in ensuring reproducibility of our tests as well.
Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:25 +0000 (11:59 -0400)]
test/py: Rework test.py to be a different kind of wrapper
Now that we have moved to being based on pytest for python3 we need to
make our test.py wrapper more robust in terms of only calling python3
rather than possibly finding and using python2. To do this, change from
execvp()'ing pytest to invoking the package itself via python. In the
event that pytest is unavailable we still get a user-friendly error:
pkg_resources.DistributionNotFound: The 'pytest' distribution was not found and is required by the application
Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:24 +0000 (11:59 -0400)]
test/py: Update test_fs to decode check_output calls
The check_output function from the subprocess Python module by default
returns data as encoded bytes and leaves decoding to the application.
Given our uses of the call, it makes the most sense to immediately
decode the results.
Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:23 +0000 (11:59 -0400)]
test/py: test_efi_selftest.py: Updates for python 3 support
- In python 3 you must use raw strings for regex as other forms are
deprecated and would require further changes to the pattern here.
In one case this lets us have a simpler match pattern.
- As strings are now Unicode our complex tests (Euro symbol,
SHIFT+ALT+FN 5) we need to declare that as a bytes string and then
decode it for use.
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:22 +0000 (11:59 -0400)]
test/py: test_ut.py: Ensure we use bytes
In the case of some unit tests we are working with providing a fake
flash device that we have written some text strings in to. In this case
we want to tell Python to encode things to bytes for us.
Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:21 +0000 (11:59 -0400)]
test/py: Manual python3 fixes
- Modern pytest is more visible in telling us about parameters that we
had not described, so describe a few more.
- ConfigParser.readfp(...) is now configparser.read_file(...)
- As part of the "strings vs bytes" conversions in Python 3, we use the
default encoding/decoding of utf-8 but in some places tell Python to
replace problematic conversions rather than throw a fatal error.
- Fix a typo noticed while doing the above ("tot he" -> "to the").
- As suggested by Stephen, re-alphabetize the import list
- Per Heinrich, replace how we write contents in test_fit.py
Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:20 +0000 (11:59 -0400)]
test/py: Automated conversion to Python 3
Use the 2to3 tool to perform numerous automatic conversions from Python
2 syntax to Python 3. Also fix whitespace problems that Python 3
catches that Python 2 did not.
Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Marek Vasut [Thu, 24 Oct 2019 15:59:19 +0000 (11:59 -0400)]
test/py: Fix pytest4 deprecation warnings
Fix the following spit from pytest:
u-boot/test/py/conftest.py:438: RemovedInPytest4Warning: MarkInfo objects are deprecated as they contain merged marks which are hard to deal with correctly.
Please use node.get_closest_marker(name) or node.iter_markers(name).
Docs: https://docs.pytest.org/en/latest/mark.html#updating-code
for board in mark.args:
In both cases, the later suggestion is applicable.
Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Igor Opaniuk <igor.opaniuk@gmail.com>
[trini: Update for current file with a few more cases, un-pin pytest in CI] Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:18 +0000 (11:59 -0400)]
test/py: Split mark to multiple lines
We inconsistently note multiple dependencies today in our tests,
sometimes with a single line that declares multiple and sometimes
multiple single lines. Current pytest seems to fail on the single line
format so change to multiple declarations.
Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:17 +0000 (11:59 -0400)]
gitlab-ci: Prepend to PATH rather than replace it
Currently we set the entire PATH rather than prepend the new paths that
we need to have searched. This however breaks parts of the "virtualenv"
that was have set up and need to use as that also will be modifying
PATH. To fix this, prepend our new locations instead.
Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 24 Oct 2019 15:59:16 +0000 (11:59 -0400)]
gitlab-ci: Fix indentation in some stanzas
In a number of our stanzas we had multi-line commands that were one
space short of alignment, correct this.
Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Oct 2019 17:13:46 +0000 (13:13 -0400)]
Merge tag 'u-boot-clk-23Oct2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-clk
- Add I2C clocks for i.MX6Q CCF driver
- Fix check in clk_set_default_parents()
- Managed API to get clock from device tree
- Fixes for core clock code (including sandbox regression tests)
In file included from ../lib/efi_loader/efi_variable.c:9:
../include/malloc.h:364:7: error: conflicting types for ‘memset’
void* memset(void*, int, size_t);
^~~~~~
In file included from ../include/compiler.h:126,
from ../include/env.h:12,
from ../lib/efi_loader/efi_variable.c:8:
../include/linux/string.h:103:15:
note: previous declaration of ‘memset’ was here
extern void * memset(void *,int,__kernel_size_t);
^~~~~~
In file included from ../lib/efi_loader/efi_variable.c:9:
../include/malloc.h:365:7: error: conflicting types for ‘memcpy’
void* memcpy(void*, const void*, size_t);
^~~~~~
In file included from ../include/compiler.h:126,
from ../include/env.h:12,
from ../lib/efi_loader/efi_variable.c:8:
../include/linux/string.h:106:15:
note: previous declaration of ‘memcpy’ was here
extern void * memcpy(void *,const void *,__kernel_size_t);
^~~~~~
Use common.h as first include as recommended by the U-Boot coding style
guide.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
AKASHI Takahiro [Thu, 24 Oct 2019 06:17:13 +0000 (15:17 +0900)]
cmd: env: extend "env [set|print] -e" to manage UEFI variables
With this patch, when setting UEFI variable with "env set -e" command,
we will be able to
- specify vendor guid with "-guid guid",
- specify variable attributes, BOOTSERVICE_ACCESS, RUNTIME_ACCESS,
respectively with "-bs" and "-rt",
- append a value instead of overwriting with "-a",
- use memory as variable's value instead of explicit values given
at the command line with "-i address,size"
If guid is not explicitly given, default value will be used.
Meanwhile, "env print -e," will be modified so that it will NOT dump
a variable's value if '-n' is specified.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Bin Meng [Mon, 28 Oct 2019 14:25:03 +0000 (07:25 -0700)]
Bring all testings in gitlab and travis CI to Azure Pipelines
This expands current Azure Pipelines Windows host tools build
testing to cover all the CI testing in gitlab and travis CI.
Note for some unknown reason, the 'container' cannot be used for
any jobs that have buildman, for buildman does not exit properly
and hangs the job forever. As a workaround, we manually call
docker to run the image to perform the CI tasks.
A complete run on Azure Pipelines takes about 2 hours and 10
minutes.
Bin Meng [Mon, 28 Oct 2019 14:25:01 +0000 (07:25 -0700)]
arm: mvebu: Avoid generating kwbimage.cfg in the source tree
At present some boards generate kwbimage.cfg in the source tree
during the build. This breaks buildman testing on some systems
where the source tree is read-only. Update makefile rules to
generate it in the build tree instead.
Note some other boards have the kwbimage.cfg file written in
advance, hence we need check if the file exists in the build
tree first, otherwise we fall back to one in the source tree.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Peng Fan [Wed, 23 Oct 2019 01:43:30 +0000 (01:43 +0000)]
spl: spl_mmc: fix getting raw_sect when boot from emmc boot partition
On i.MX8, when booting from eMMC boot partition, the whole flash.bin
is stored in boot partition, however SPL switches to user partition
during the init of mmc driver:
spl_mmc_load() -> mmc_init()
Then it tries to load the container image in
spl_mmc_get_uboot_raw_sector(), but here it reads the data from user
partition and the header is not recognized as a valid header.
So we move spl_mmc_get_uboot_raw_sector after eMMC partition switch
to address this issue.
Anyway put spl_mmc_get_uboot_raw_sector before eMMC partition switch
is not correct, so let's move it after eMMC partition switch.
Reported-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Yangbo Lu [Mon, 21 Oct 2019 10:09:09 +0000 (18:09 +0800)]
mmc: fsl_esdhc: drop i.MX DDR support code
A previous patch below adding DDR mode support was actually for i.MX
platforms. Now i.MX eSDHC driver is fsl_esdhc_imx.c. For QorIQ eSDHC,
it uses different process for DDR mode, and hasn't been supported.
Let's drop DDR support code for i.MX in fsl_esdhc driver.
Bin Meng [Sun, 27 Oct 2019 12:19:48 +0000 (05:19 -0700)]
Add Microsoft Azure Pipelines configuration
Microsoft Azure Pipelines [1] provides unlimited CI/CD minutes and
10 parallel jobs to every open source project for free.
This adds a configuration file for Azure Pipelines to utilize the
free Windows VM hosted by Microsoft to ensure no build broken in
building U-Boot host tools for Windows.
Bin Meng [Sun, 27 Oct 2019 12:19:47 +0000 (05:19 -0700)]
tools: Avoid creating symbolic links for tools/version.h
When building U-Boot host tools for Windows from Microsoft Azure
Pipelines, the following errors were seen:
HOSTCC tools/mkenvimage.o
In file included from tools/mkenvimage.c:25:
./tools/version.h:1:1: error: expected identifier or ‘(’ before ‘.’ token
1 | ../include/version.h
| ^
tools/mkenvimage.c: In function ‘main’:
tools/mkenvimage.c:117:4: warning: implicit declaration of function ‘usage’ [-Wimplicit-function-declaration]
117 | usage(prg);
| ^~~~~
tools/mkenvimage.c:120:35: error: ‘PLAIN_VERSION’ undeclared (first use in this function)
120 | printf("%s version %s\n", prg, PLAIN_VERSION);
| ^~~~~~~~~~~~~
tools/mkenvimage.c:120:35: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [scripts/Makefile.host:114: tools/mkenvimage.o] Error 1
It turns out tools/version.h is a symbolic link and with Windows
default settings it is unsupported hence the actual content of
tools/version.h is not what file include/version.h has, but the
the linked file path, which breaks the build.
To fix this, remove the symbolic links for tools/version.h. Instead
we perform a copy from include/version.h during the build.
Bin Meng [Sun, 27 Oct 2019 12:19:46 +0000 (05:19 -0700)]
Add .gitattributes for line endings
When building U-Boot host tools for Windows from Microsoft Azure
Pipelines, we see tons of weird warnings and errors emitted from
every Kconfig files:
Kconfig:6:warning: ignoring unsupported character ''
Kconfig:6:warning: ignoring unsupported character ''
Kconfig:8:warning: ignoring unsupported character ''
Kconfig:9:warning: ignoring unsupported character ''
Kconfig:10:warning: ignoring unsupported character ''
Kconfig:10:warning: ignoring unsupported character ''
Kconfig:13:warning: ignoring unsupported character ''
arch/Kconfig:1:warning: ignoring unsupported character ''
arch/Kconfig:2:warning: ignoring unsupported character ''
arch/Kconfig:2:warning: ignoring unsupported character ''
arch/Kconfig:4:warning: ignoring unsupported character ''
...
After several rounds of experiments, it turns out this is caused
by line endings. Historically, Linux and macOS used linefeed (LF)
characters while Windows used a carriage return plus a linefeed
(CRLF). When Azure Pipelines checks out the U-Boot repo, Git tries
to compensate for the difference by automatically making lines end
in CRLF in the working directory on Windows, which confuses the
Kconfig file parsing logic.
Fortunately Git provides a way for repos to tell Git not to do such
automatical line endings conversion via .gitattributes file below:
Bin Meng [Sun, 27 Oct 2019 12:19:43 +0000 (05:19 -0700)]
linux/types.h: Surround 'struct ustat' with __linux__
'struct ustat' uses linux-specific typedefs to declare its memebers:
__kernel_daddr_t and __kernel_ino_t. It is currently not used by any
U-Boot codes, but when we build U-Boot tools for other platform like
Windows, this becomes a problem.
Bin Meng [Sun, 27 Oct 2019 12:19:42 +0000 (05:19 -0700)]
tools: zynqmpbif: Use compiler builtin instead of linux-specific __swab32
__swab32() is a Linux specific macro defined in linux/swab.h. Let's
use the compiler equivalent builtin function __builtin_bswap32() for
better portability.
fdt: Fix alignment issue when reading 64-bits properties from fdt
The FDT specification [0] gives a requirement of aligning properties on
32-bits. Make sure that the compiler is aware of this constraint when
accessing 64-bits properties.
Kever Yang [Tue, 22 Oct 2019 07:39:47 +0000 (15:39 +0800)]
dm: core: Update log method for uclass_find_device_by_seq
Use log() insted of debug() for uclass_find_device_by_seq function,
since this print is very much and we can filter it out with log()
interface.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Move #define to top of file as per docs: Signed-off-by: Simon Glass <sjg@chromium.org>
Dmitry Torokhov [Tue, 22 Oct 2019 03:09:56 +0000 (20:09 -0700)]
patman: separate emails in CC list with NULs
There is a contributor in Linux kernel with a comma in their name, which
confuses patman and results in invalid to- or cc- addresses on some
patches. To avoid this, let's use \0 as a separator when generating cc
file.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 21 Oct 2019 23:26:52 +0000 (17:26 -0600)]
bootstage: Allow SPL to obtain bootstage info from TPL
It is possible to enable bootstage in TPL. TPL can stash the info for SPL.
But at present this information is then lost because SPL does not read
from the stash.
Add support for SPL not being the first phase to enable bootstage. Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 21 Oct 2019 23:26:51 +0000 (17:26 -0600)]
bootstage: Mark the start/end of TPL and SPL separately
At present bootstage in TPL and SPL use the same ID so it is not possible
to see the timing of each. Separate out the IDs and use the correct one
depending on which phase we are at.
Example output:
Timer summary in microseconds (14 records):
Mark Elapsed Stage
0 0 reset
224,787 224,787 TPL
282,248 57,461 end TPL
341,067 58,819 SPL
925,436 584,369 end SPL
931,710 6,274 board_init_f
1,035,482 103,772 board_init_r
1,387,852 352,370 main_loop
1,387,911 59 id=175
projects / u-boot.git / log