Adds a test suite to ensure that part_get_info_by_type works correctly
by creating a hybrid GPT/MBR partition table and reading both.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
[trini: Add this on the other sandbox configs] Signedd-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
disk: part: Add API to get partitions with specific driver
Adds part_driver_get_type() API which can be used to force a specific
driver to be used when getting partition information instead of relying
on auto detection.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
d94d9844bc ("dm: part: Update test to use mmc2") attempted to make the
test use mmc2, but the change was incomplete in that it didn't also
change the strings that reference a specific partition. Fix these so
that the test passes again
tests: Fix exception when cleaning up skipped test
If test_cat and test_xxd cannot create the required file, the test will
be skipped, but this would result in an exception being raised in the
finally block because the file didn't exist to be cleaned up. This
caused the test to be marked as failed instead of skipped.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Joshua Watt [Fri, 23 Jun 2023 22:05:48 +0000 (17:05 -0500)]
android_ab: Add option to skip decrementing tries
It is is sometimes desired to be able to skip decrementing the number of
tries remaining in an Android A/B boot, and instead just check which
slot will be tried later. This can commonly be be the case for platforms
that want to A/B u-boot itself, but are required to boot from a FAT MBR
partition. In these cases, u-boot must do an early check that the MBR
points to the correct A/B boot partition, and if not rewrite the MBR to
point to the correct one and reboot. Decrementing the try count in this
case is not desired because it means that each u-boot might constantly
ping-pong overwriting the MBR and rebooting until all the retries are
used up.
Jonas Karlman [Tue, 11 Jul 2023 22:37:30 +0000 (22:37 +0000)]
disk: Use BOOT_DEFAULTS instead of DISTRO_DEFAULTS
Set default y based on common BOOT_DEFAULTS instead of DISTRO_DEFAULTS.
No change is intended, affected options is already implied for DISTRO
and BOOTSTD due to BOOT_DEFAULTS imply DOS_PARTITION (USB_STORAGE),
EFI_PARTITION and ISO_PARTITION.
Fixes: a0c739c184ca ("boot: Create a common BOOT_DEFAULTS for distro and bootstd") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Tue, 11 Jul 2023 12:15:53 +0000 (14:15 +0200)]
Makefile: Add missing quotes around sort --field-separator
Busybox sort does not handle --field-separator== , replace this
with --field-separator='=' for maximum compatibility.
Fixes: cc5a490cf465 ("Makefile: Sort u-boot-initial-env output") Reported-by: Milan P. Stanić <mps@arvanta.net> Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 16 Jul 2023 03:39:17 +0000 (21:39 -0600)]
efi: Use the installed ACPI tables
U-Boot sets up the ACPI tables during startup. Rather than creating a
new set, install the existing ones. Create a memory-map record to cover
the tables.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:39:13 +0000 (21:39 -0600)]
x86: Make sure that the LPC is active before SDRAM init
Some boards need to access GPIOs to determine which SDRAM is fitted to the
board, for example chromebook_link. Probe this device (if it exists) to
make sure that this works as expected.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:39:08 +0000 (21:39 -0600)]
x86: Enable useful options for qemu-86_64
This build can be used to boot standard distro builds, since these are
mostly 64-bit these days. Enable some more options, so that all possible
EFI UUIDs are decoded, we get a proper printf() in SPL, can search
memory for tables, support the full set of standard-boot features, have
full logging and can boot from CDROM media.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:39:04 +0000 (21:39 -0600)]
x86: Enable display for QEMU 64-bit
Enable the various options needed for display to work on the qemu-x86_64
board. This includes expanding the available malloc() memory in SPL,
since the PCI bus must be enumerated in order to find the video device.
It also includes enabling a bloblist, so that the video parameters can be
passed. This is placed at address 10000 but is not needed after U-Boot
proper reads the information there.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:39:02 +0000 (21:39 -0600)]
pci: Adjust video BIOS debugging to be SPL-friendly
A hex value is expected for the VGA mode. Add a 0x prefix, since the #
construct is not supported in SPL. We don't want to add it, due to
code-size constraints.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:39:01 +0000 (21:39 -0600)]
x86: Init video in SPL if enabled
When video is required in SPL, set this up ready for use. Ignore any
problems since it may be that video is not actually available and we
still want to continue on to U-Boot proper in that case.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:39:00 +0000 (21:39 -0600)]
x86: Ensure SPL banner is only shown once
Print the banner in SPL init only if the spl_board_init() function isn't
enabled. The spl_board_init() function is in the same file, but is called
later, by board_init_r().
This avoids printing two banners, which causes tests to fail.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:38:58 +0000 (21:38 -0600)]
x86: Allow video-BIOS code to be built for SPL
With qemu-x86_64 we need to run the video BIOS while in 32-bit mode, i.e.
SPL. Add a Kconfig option for this, adjust the Makefile rules and use
CONFIG_IS_ENABLED() where needed.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:38:57 +0000 (21:38 -0600)]
pci: Tidy up logging and reporting for video BIOS
When running the ROM the code is not very helpful when something goes
wrong. Add a little more debugging and some logging of return values to
improve this.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:38:55 +0000 (21:38 -0600)]
pci: Support autoconfig in SPL
Allow PCI autoconfig to be handled in SPL, so that we can set it up
correctly for boards which need to do this before U-Boot proper. This
includes qemu-x64_64 which needs to set up the video device while in
32-bit mode.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:38:53 +0000 (21:38 -0600)]
bdinfo: Show the malloc base with the bdinfo command
It is useful to see the base of the malloc region. This is visible when
debugging but not in normal usage.
Add it to the global data so that it can be shown.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Nikhil M Jain <n-jain1@ti.com>
Simon Glass [Sun, 16 Jul 2023 03:38:52 +0000 (21:38 -0600)]
x86: Improve the trampoline in 64-bit mode
At present this leaves the stack at the pre-relocation value. This is not
ideal since we want to have U-Boot running entirely from the top of
memory.
In addition, the new global_data pointer is not actually used, since
the global_data pointer itself is relocated, then the pre-relocation value
is changed, so the effective value (after relocation) does not update.
Adjust the implementation to follow the 32-bit code more closely, with a
trampoline function which is passed the new stack and global_data pointer.
This ensures that the correct values come through even when relocating.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:38:47 +0000 (21:38 -0600)]
part: Allow setting the partition-table type
Some devices have multiple partition types available on the same media.
It is sometimes useful to see these to check that everything is working
correctly.
Provide a way to manually set the partition-table type, avoiding the
auto-detection process.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:38:46 +0000 (21:38 -0600)]
bdinfo: Show the RAM top and approximate stack pointer
These are useful pieces of information when debugging. The RAM top shows
where U-Boot started allocating memory from, before it relocated. The
stack pointer can be checked to ensure it is in the correct region.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Nikhil M Jain <n-jain1@ti.com>
Simon Glass [Sun, 16 Jul 2023 03:38:45 +0000 (21:38 -0600)]
acpi: Add a comment to set the acpi tables
Sometimes a previous bootloader has written ACPI tables. It is useful to
be able to find and list these. Add an 'acpi set' command to set the
address for these tables.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:38:38 +0000 (21:38 -0600)]
bios_emulator: Add Kconfig and adjust Makefile for SPL
The Kconfig for this is currently inside a particular board. Move it into
the correct place and allow use in SPL, so that video can be used there
if needed.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 12 Jul 2023 15:04:42 +0000 (09:04 -0600)]
bootstd: Support automatically setting Linux parameters
Some Linux parameters can be set automatically by U-Boot, if it knows the
device being used. For example, since U-Boot knows the serial console
being used, it can add parameters for earlycon and console.
Add support for this.
Note that this is an experimental feature and we will see how useful it
turns out to be. It is very handy for ChromeOS, since otherwise it is very
difficult to manually determine the UART address or port number,
particularly in a script.
Provide an example of how this is used with ChromeOS.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 12 Jul 2023 15:04:40 +0000 (09:04 -0600)]
x86: qemu: Create a little more room for U-Boot
We want to enable some of the more interesting bootstd features. Move SPL
up to create some room for the larger U-Boot binary. Also disable
microcode since this is not needed
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 12 Jul 2023 15:04:39 +0000 (09:04 -0600)]
bootstd: Add support for updating elements of the cmdline
Add a bootflow command to update the command line more easily. This allows
changing a particular parameter rather than editing a very long strings.
It is also easier to handle with scripting.
The new 'bootflow cmdline' command allows getting and setting single
parameters.
Fix up the example output while we are here, since there are a few new
items.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 12 Jul 2023 15:04:38 +0000 (09:04 -0600)]
bootstd: Add a function to update a command line
The Linux command line consists of a number of words with optional values.
At present U-Boot allows this to be changed using the bootargs environment
variable.
But this is quite painful, since the command line can be very long.
Add a function which can adjust a single field in the command line, so
that it is easier to make changes before booting.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 12 Jul 2023 15:04:37 +0000 (09:04 -0600)]
bdinfo: Show information about the serial port
It is useful to see the detailed setting of the serial port, e.g. to
allow setting up earlycon or console for Linux. Add this output to the
'bdinfo' command.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: squashed in 20230716033929.253357-2-sjg@chromium.org] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 12 Jul 2023 15:04:36 +0000 (09:04 -0600)]
bootstd: Allow storing x86 setup information
On x86 boards Linux uses a block of binary data to provide information
about the command line, memory map, etc. Provide a way to store this in
the bootflow so it can be passed on to the OS.
No attempt is made to generalise the code, since other archs don't need
this information. The field is present always, though, to avoid needing
accessors or #ifdefs when building code on other archs.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 12 Jul 2023 15:04:35 +0000 (09:04 -0600)]
bootstd: Use the bootargs env var for changing the cmdline
The "bootargs" environment variable is used to set the command-line
arguments to pass to the OS. Use this same mechanism with bootstd as well.
When the variable is updated, it is written to the current bootflow. When
the current bootflow is updated, the environment variable is updated too.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 12 Jul 2023 15:04:32 +0000 (09:04 -0600)]
bootstd: Use bootdev instead of bootdevice
It seems better to call this a 'bootdev' since this is name used in the
documentation. The older 'Bootdevice' name is no-longer used and may cause
confusion with the 'bootdevice' environment variable.
Update throughout to use bootdev.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 12 Jul 2023 15:04:30 +0000 (09:04 -0600)]
test: Skip flat-tree tests if devicetree is not used
Many tests don't actually use the devicetree at all so there is no point
in running the tests both with livetree and flat tree. Check for this and
skip the flat tree test in that case.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Sat, 15 Jul 2023 15:19:11 +0000 (11:19 -0400)]
Merge tag 'efi-2023-10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2023-10-rc1
Documentation:
* enhance UEFI anti-rollback documentation
EFI:
* Reconnect drivers if UninstallProtocol fails
* Prefer short device paths for boot options
* Fix error handling when updating boot options for block devices
Masahisa Kojima [Thu, 22 Jun 2023 08:06:29 +0000 (17:06 +0900)]
doc: uefi: enhance anti-rollback documentation
To enforce anti-rollback to any older version, dtb must be
always update manually. This should be described in the
documentation.
This commit also adds the recommendation that secure system should not
enable the fdt command because lowest-supported-version
property in device tree can be changed by fdt command.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
The main README file is the wrong place to document how different terminal
emulations can be used to access the U-Boot serial console. C-Kermit which
requires a configuration file or several commands to access the U-Boot
console may not be the preferred choice for newcomers. The provided wiki
link is invalid.
The man-pages for loadb and loads already show how to use the commands with
picocom.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Ilias Apalodimas [Tue, 20 Jun 2023 06:19:31 +0000 (09:19 +0300)]
efi_selftests: add extra testcases on controller handling
We recently fixed a few issues wrt to controller handling. Add a few
test cases to cover the new code.
- return EFI_DEVICE_ERROR the first time the protocol interface of
the controller is uninstalled, after all the children have been
disconnected. This should make the drivers reconnect
- add tests to verify controllers are reconnected when uninstalling a
protocol fails
- add tests to make sure EFI_NOT_FOUND is returned if a non existent
interface is being removed
Ilias Apalodimas [Tue, 20 Jun 2023 06:19:30 +0000 (09:19 +0300)]
efi_loader: fix the return codes of UninstallProtocol
Up to now we did not check the return value of DisconnectController.
A previous patch is fixing that taking into account what happened during
the controller disconnect. But that check takes place before our code
is trying to figure out if the interface exists to begin with. In case a
driver is not allowed to unbind -- e.g returning EFI_DEVICE_ERROR, we
will end up returning that error instead of EFI_NOT_FOUND.
Add an extra check on the top of the function to make sure the protocol
interface exists before trying to disconnect any drivers
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Ilias Apalodimas [Tue, 20 Jun 2023 06:19:29 +0000 (09:19 +0300)]
efi_loader: check the status of disconnected drivers
efi_uninstall_protocol() calls efi_disconnect_all_drivers() but never
checks the return value. Instead it tries to identify protocols that
are still open after closing the ones that were opened with
EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL, EFI_OPEN_PROTOCOL_GET_PROTOCOL
and EFI_OPEN_PROTOCOL_TEST_PROTOCOL.
Instead of doing that, check the return value early and exit if
disconnecting the drivers failed. Also reconnect all the drivers of
a handle if protocols are still found on the handle after disconnecting
controllers and closing the remaining protocols.
While at it fix a memory leak and properly free the opened protocol
information when closing a protocol.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Raymond Mao [Mon, 19 Jun 2023 21:23:01 +0000 (14:23 -0700)]
Load option with short device path for boot vars
The boot variables automatically generated for removable medias
should be with short form of device path without device nodes.
This is a requirement for the case that a removable media is
plugged into a different port but is still able to work with the
existing boot variables.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Raymond Mao [Mon, 19 Jun 2023 21:22:58 +0000 (14:22 -0700)]
Move bootorder and bootoption apis to lib
Rename and move bootorder and bootoption apis from cmd to lib
for re-use between eficonfig and bootmgr
Fix 'unexpected indentation' when 'make htmldocs' after functions
are moved
Signed-off-by: Raymond Mao <raymond.mao@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Flushing kernel image after decompression was taking 113 milliseconds
with U-boot 2022.10. With U-boot 2023.01 and 2023.04, flushing
the same amount of memory takes approx 1.5 seconds. With
U-boot 2023.07-rc6, it takes 6.5 seconds.
powerpc flush_cache() function used to call WATCHDOG_RESET() after
flushing every cacheline. At that time WATCHDOG_RESET() was light
so the operation was almost seamless.
But commit 29caf9305b6 ("cyclic: Use schedule() instead of
WATCHDOG_RESET()") replaced WATCHDOG_RESET() by schedule() and that
started to hurt with U-boot 2022.10.
And in U-boot 2023.07-rc6 that's even worse after
commit 26e8ebcd7cb ("watchdog: mpc8xxx: Make it generic").
In the meantime commit 729c1fe656 ("powerpc: introduce
CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLD") gives us the opportinity to
only call schedule() every given chunk of data instead of every
cacheline. As explained in that commit there is no point in pinging
the watchdog after every cacheline flush, so lets define a sensible
default chunk size of 4k which matches to size of a page on most
powerpc platforms.
With that new default threshold, the culprit flushing performed after
kernel image decompression now takes 85 milliseconds on a powerpc 8xx.
Fixes: 29caf9305b6 ("cyclic: Use schedule() instead of WATCHDOG_RESET()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Uncompressing a 1.7Mbytes FIT image on U-boot 2023.04 takes
approx 7s on a powerpc 8xx.
The same on U-boot 2023.07-rc6 takes approx 28s unless watchdog
is disabled.
During that decompression, LzmaDec_DecodeReal() calls schedule
1.6 million times, that is every 4µs in average.
In the past it used to be a call to WATCHDOG_RESET() which was
just calling hw_watchdog_reset().
But the combination of commit 29caf9305b6 ("cyclic: Use schedule()
instead of WATCHDOG_RESET()") and commit 26e8ebcd7cb ("watchdog:
mpc8xxx: Make it generic") results in an heavier processing.
However, there is absolutely no point in calling schedule() that
often.
By moving and keeping only one call to schedule() in the main
loop the number of calls is reduced to 1.2 million which is still
too much. So add logic to only call schedule every 1024 times.
That leads to a call to schedule approx every 6ms which is still
far enough to entertain the watchdog which has a 1s timeout on
powerpc 8xx.
powerpc 8xx being one of the slowest targets we have today in
U-boot, and most other watchdogs having a timeout of one minutes
instead of one second like the 8xx, this fix should not have
negative impact on other targets.
Fixes: 29caf9305b6 ("cyclic: Use schedule() instead of WATCHDOG_RESET()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Simon Glass <sjg@chromium.org>
ufs: Use 'TASK_TAG' to construct the ucd_req_ptr->header.dword_0
Instead of using the hard-coded value of 0x1f, use 'TASK_TAG'
macro instead to construct the ucd_req_ptr->header.dword_0
This is in sync with what the Linux UFS driver does, i.e.
set the byte0 equal to TASK_TAG (see [1]).
Setting it to a fixed value of 0x1f is wrong as we define
TASK_TAG as 0 inside u-boot ufs framework. So, instead we
should use the macro value directly.
Philippe Reynes [Thu, 29 Jun 2023 09:25:23 +0000 (11:25 +0200)]
drivers: led: bcm6753: do not use null label to find the top
This driver considers that a node with an empty label is the top.
But the led class has changed, if a label is not provided for a led,
the label is filed with the node name. So we update this driver
to use a wrapper to manage the top led node.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Kunihiko Hayashi [Tue, 20 Jun 2023 10:50:48 +0000 (19:50 +0900)]
board_f: Relocate fdt even if GD_FLG_SKIP_RELOC is set
In case of OF_SEPARATE (!OF_EMBED), the devicetree blob is placed
after _end, and fdt_find_separate() always returns _end. There is
a .bss section after _end and the section is cleared before relocation.
When GD_FLG_SKIP_RELOC is set, relocation is skipped, so the blob is
still in .bss section, but will be cleared. As a result, the devicetree
become invalid.
To avoid this issue, should relocate it regardless of GD_FLG_SKIP_RELOC
in reloc_fdt().
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
net: ti: am65-cpsw-nuss: Use dedicated port mode control registers
The different CPSW sub-system Ethernet ports have different PHY mode
control registers. In order to allow the modes to get configured
independently only the register for the port in question must be
accessed, otherwise we would just be re-configuring the mode for port 1,
while leaving all others at their power-on defaults. Fix this issue by
adding a port-number based offset to the mode control base register
address based on the fact that the control registers for the different
ports are spaced exactly 0x4 bytes apart.
Fixes: 9d0dca1199d1 ("net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver") Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Peter Robinson [Wed, 14 Jun 2023 14:41:10 +0000 (15:41 +0100)]
disable NFS support by default
While NFS is widely used in data centres, and private
networks it's quite a nuanced usecase for device firmware.
A lot of devices already disable it.
Various network protocols should really be opt in, not opt
out, because they add extra size and are potential attack
vectors from a security PoV. In the NFS case it doesn't
really make sense for a lot of devices like tables, SBCs etc.
It's also something we don't really want for SystemReady-IR
due to security concerns.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Emmanuel Di Fede [Wed, 14 Jun 2023 10:05:28 +0000 (12:05 +0200)]
env: mmc: statically set the environment partition name
The new opt-out setting, CONFIG_ENV_MMC_PARTITION, statically sets
the MMC environment partition name. Prior to this patch, the only way
to declare this partition name was by creating a
'u-boot,mmc-env-partition' parameter in the device-tree's /config node.
This setting provides additional flexibility, particularly in cases
where accessing the device-tree is not straightforward (e.g. QEMU).
If undeclared, the device-tree's setting will be used.
Signed-off-by: Emmanuel Di Fede <emmanuel.difede@cysec.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
AKASHI Takahiro [Tue, 13 Jun 2023 01:30:45 +0000 (10:30 +0900)]
firmware: scmi: return a right errno for SCMI status code
scmi_to_linux_errno() is set to return an appropriate errno
which corresponds to a given SCMI status code.
But the current implementation always returns the same value.
AKASHI Takahiro [Mon, 12 Jun 2023 01:14:49 +0000 (10:14 +0900)]
clk: scmi: claim the dependency on CONFIG_CLK
Without CONFIG_CLK, the build fails with the following message:
LD u-boot
aarch64-none-linux-gnu-ld.bfd: drivers/firmware/scmi/scmi_agent-uclass.o: \
in function `scmi_bind_protocols':
.../drivers/firmware/scmi/scmi_agent-uclass.c:79: undefined reference to \
`_u_boot_list_2_driver_2_scmi_clock'
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
projects / u-boot.git / log